Satellite L300D - SP5001 mast * one player does not recognize blank CDs

Similar Questions

• my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems

• Satellite Pro M76E - CD player does not recognize blank CD D:\ is not accessible

  Hello.

  Just recently, my satellite pro m76e ceased to recognize blank CDs. If I stick a CD it recognizes that it is a CD, but if I click, it throws an error message indicating that "D:\ is not accessible. Incorrect function. "I tried the search for driver updates but couldn't find one, and toshiba sites says you don't need additional drivers for the internal CD drives.

  The drive works fine for everything else. It's just empty CD. Any advice would be welcome.

  See you soon. Dan

  Hello

  One question; Why you want to read a blank CD? ?:|
  As you say all the CD and DVD is recognized, but only the blank CD cannot be read.

  Regarding the driversa? ... you're right, the update of the driver is not necessary and is not possible because the Windows operating system uses a clean Microsoft drivers to run the ODD.

  But have you already checked these threads?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24238

  There are a few proposals of solution that helped solve a similar a? D:\ is not accessible. Incorrect FunctionA? problems with the CD/DVD drive.

• Satellite A100-773: CD/DVD player does not recognize the CD

  Hello friends,

  I have satellite A100-773.
  When I turned on it today it does not recognize any CD. He acknowledges, however, DVD and can also burn CDs with Nero.

  As soon as I put in a CD it says (in German) something like "access denied, unauthorized function.
  It's a mystery to me what happened. Until yesterday, it was perfect. Now the same CD (and I tried 20) wouldn' work anymore.

  I tried the recovery system to an earlier point in time, but it does not help. In the hardware Manager tells me that everything is going well.

  Do you have any idea what it can be?

  Thank you very much

  Ognian

  Hello

  In such cases, it s is not easy to say why it happens.
  Usually if the drive cannot read media either material works badly or the CD / DVD is not compatible and taken in charge.

  But we hope that the equipment is not damaged.
  Try to remove the drive from Device Manager and restart the laptop.
  After that restart of the operating system should recognize the drive again and load the driver. Then you could try to test the drive again.

  I also found a very large Microsoft document on:
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129

  and this:
  http://support.Microsoft.com/kb/315350/

  The other possibility is to use the recovery CD to reinstall the OS.

• Satellite A100-998: CD/DVD player does not recognize digital camera installation disk

  Hello world.

  I just tried to install my digital Canon camera on my Satellite A100 - 998 (PSAA9E), but the drive just won't start. It is not recognizing that the disc is in the drive.

  I tried the drive with a music CD and it works very well and thinking the disc that came with the camera was defective, I tried in my desktop pc, and it installed without a problem.

  Anyone have any ideas why my portable drive is to play music CDs, but not to pick up the cd software...

  Your help would me most appreciated.
  Rgds,
  Neil

  Weird noises...
  Do you have any burning application or something that has to do with CD-writing/emulation/etcetc. ?

  Maybe these programs may cause such problems. Just to realize what you have on your system and tell us, maybe we can find a solution.

  Welcome man

• Satellite L20: drive does not recognize blank CDs - incorrect function

  My CD-RW/DVDR drive works perfectly as a DVD player, but when I insert optical media blank to copy a CD the drive is not automatically recognized by the computer (as it would when a DVD or CD is inserted).

  If I go to "my computer" and double click on the D drive and I get an error message saying "D:\ is not accessible. Incorrect function ".

  Hello

  This behavior is noticed by many users on various forums, and it is obviously not new. If I understand you right reading CD and DVD is not the problem.

  You can create CDs and DVDs using any burning software pre-installed? Does your drive read data self made and CD and DVD movie

• CD player does not recognize blank cd in the drive in win xp.

  my cd drive will read a cd but not recognixe a blank cd

  Hi Edmund,

  I suggest you to run the fixit mentioned in the following Microsoft Link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem persists, try the following, then check.

  1. click on Start , then click RUN.

  2. type REGEDIT.exe in the command prompt and then run, and then press ENTER.

  3. Locate and click the following registry key.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the component right, if you have UpperFilters, right-click UpperFiltersand then click Remove.

  5. click on Yes to confirm the deletion of the UpperFilters registry entry.

  6. in the right pane, if you LowerFilters, click LowerFilters, and then click Remove.

  7. click on Yes to confirm the deletion of the LowerFilters registry entry.

  8. exit the registry editor and then restart the computer.

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope this information is useful.

• DVD player does not recognize blank DVDs.

  I think that my drive can write to DVDs, but it doesn't even recognize empty (when I go into my computer after burst in, nothing doesn't appear). The disc seems to turn for a few seconds, then stops. He can read the previously empty DVD that had something serious on it by someone else. Research online I found that the problem is very common.
  In the properties of the drive, it says disc SAMSUNG HD160JJ/P and HL-DT-ST DVDROM GDRH10N CD dvd/drive under hardware. I'm pretty sure he can write, but I could be wrong.
  Thank you in advance, I would really like to do something with all my blank CD/DVDs.

  This part of the drive name indicates that your drive is read-only, and cannot write DVD:

  HL-DT-ST DVD-ROM GDRH10N

  If you want to write DVDs, you will need to purchase an optical drive DVD - RW. MS - MVP - Elephant Boy computers - don't panic!

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?

• Windows Media Player does not recognize the iPod touch.

  Windows media player does not recognize my ipod touch to sync

  Open WMP in the taskbar from top, find "Tools", scroll down to options.

  in the new window, locate the Hardware tab, add hardware.

• Windows Media Player does not recognize my Archos 5 internet tablet

  Original title: windows media player

  All of a sudden my windows media player does not recognize my Archos 5 internet tablet when I plug in the USB connection cable. I have the media player 11 and this is what is recommended. I do everything according to the book and he just keeps telling me to connect a device.

  Hello

  ·         Is the device is detected in windows Explorer (start > my computer)?

  ·         You are able to see the device in the Device Manager?

  ·         What happens when you try to connect to the device? You get the error message?

  ·         Did you try the device on another computer or another USB port and check if it works?

  ·         Remember to make changes on the computer before the show?

  I suggest you follow these methods and see if it helps:

  Method 1:

  I suggest you to uninstall and reinstall Windows Media Player 11 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=8163

   

  See: installation and removal of the drive

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

   

  Method 2:

   

  If the device is not detected in Device Manager, or if you find any yellow exclamation try to uninstall it restarts the computer and check if that helps.

   

  How to configure devices by using Device Manager in Windows XP

  http://support.Microsoft.com/kb/307970

   

   

  Method 3:

  Also run the Microsoft Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

   

   

  You can also check out the link below:

  http://www.ARCHOS.com/support/support_tech/FAQs/en/faq_Archos5.html?country=us&lang=en

• Windows media player does not recognize my hard drive

  Windows media player

  Why Windows media player does not recognize my hard drive

  Hello

  1 are there any changes or updates made on the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  I suggest to see the links and check if it helps:

  The problems of the CDs or DVDs

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

• Windows Media Player does not recognize the device (iphone)

  I'm trying to download music from Windows Media Player on my iphone. I can get the files in the synchronization section but the Media Player does not recognize my device or seem to have a way to connect. Can anyone help?

  You will need to install iTunes. The iTunes Setup program adds drivers and services for the iPhone. That's what I do:

  1. Once iTunes is installed, it allows to import all the music in Windows Media Player.
  2. If you want to automatically download album art, you will need to register for an iTunes Store account. Otherwise, just copy the album art from Windows Media Player:
  a. at a command prompt, cd in each music folder.
  b. attrib s h AlbumArt * Large.jpg
  c. xcopy AlbumArt * %tmp% Large.jpg
  d. attrib + s + h AlbumArt * Large.jpg
  e e.. now, for each album in iTunes, right click and choose 'Get Info'. Drag & drop the corresponding JPG of %tmp% in the field "Cover Art" and click OK.
  3. connect your iPhone. Select "Manually manage music" on the screen of the iPhone.
  4. click on the icon on the left side of iTunes music. Make sure that all the music that you want to synchronize has an audit. (This is the default).
  5 Select and drag it to the icon of the iPhone.

• Player does not recognize that the CD or DVD is loaded

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

  Sounds like the drive has failed.  You can try to clean with a CD/DVD audio standard disk cleanup, but if it fails, then the reader should probably be replaced.

  "RoboTriumph" wrote in the new message: * e-mail address is removed from the privacy... *

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?