DVD +/-R/W/RAM

Similar Questions

• Satellite Pro 4600: need info on DVD drive and RAM avaible

  Hello!
  I'm here for my first thread with the usual question of compatibility of drive and the dvd ram...

  I made a mistake: I bought the drive and ram without looking on this forum...

  In any case, on the optical drive:
  I saw I had to look at the manual... but I did not because my laptop is second hand.
  I had a look at [http://www.toshiba.fr/produits-toshiba/produits-informatiques/satellite_pro_4600_piii700_128.htm#]
  but... I don't know how it is supposed to help me choose an optical drive.

  So if you have somewhere to exact matches for my smoker pro model, it would be great.

  Now Ive had a problem of Ram also, but Im gona do another thread.

  Thanks a lot for your help

  Sylvan

  Hello

  > I saw I had to look at the manual... but I did not because my laptop is second hand.
  It s no matter she s a laptop second hand. You can download the user manual for this series of portable since the European driver Toshiba page.

  I did and discovered that this drives are supported:
  Toshiba drive CD-RE/DVD-ROM SD-R2002
  Toshiba drive of DVD - ROM SD-C2402
  TEAC CD-224th CD-ROM drive

  Best regards

• Satellite A60-302: built in DVD - RW?

  Dear Toshiba

  I'm Maria of the Hungary. I brought a computer Toshiba laptop Satellite A60-302, because I wanted something to burn and read CD and DVD. In my view, that can read DVDs and CDs and burn CDs. I wish that mobile knowledge really cannot burn DVDs, or I couldn't do. Please help me and write me as soon as possible by e-mail.

  Thank you.

  Maria

  Hello

  I search in the internet and found that the Satellite A60 302 only supports playback of CD-ROM, DVD-ROM, DVD-R/RW/RAM and for CD-ROM and CD - RW writing because it is a COMBO drive!

  The drive is set up and could not be changed by a technician!
  Here is some additional information:

  Read:
  CD-ROM, CD - R 24xMax
  CD - RW 12xMax
  DVD-ROM 8xMax
  DVD - R, DVD - RW 4xMax
  DVD-RAM 2xMax

  To write:
  CD - R 24xMax
  CD - RW 4xMax

  Bye and Merry Christmas

  Bossi

• Qosmio G20-127: after firmware update cannot burn CD or DVD

  I'm updating my firmware from F101 F102 to dvd so I can't copy any CD or DVD in my drive also some CD & DVD cannot be played after this update, I tried to
  install the old firmware F101, but I can't so please help me?

  Thanx

  Hello

  How do update you?
  Before update you the firmware, follow this:
  -Always use AC adapter to avoid a power off by updating the F / w.
  -Do not turn on DVD + r / + RW/RAM DRIVE by updating the F / w.
  -Put an end to all applications except the F/W update of the program.
  -Are not completed with force the F/W update program
  -Be sure to manually restart Windows after completing the update.
  -Update program automatically eliminates the ineligible disks

• Satellite Pro A100: Mat * a UJ - 841 s DVD Multi drive does not

  Hello

  I have a Satellite Pro A100 with a carpet * a UJ - 841 s DVD Multi Drive.

  Recently, I decided that as my laptop is running slowly I wanted to format and reinstall XP Pro, I used a standard version of OEM XP Pro (not seller specfic) and he went on the formatting and the reconstruction of my laptop.

  Fortunately, I used Acronis True Image to backup my laptop before I did that my above mentioned dvd player is so more to bury properly (all the drivers and the necessary software has been installed). Before I formatted the laptop I could burn on + and - DVD (r, rw and ram) now that the laptop has been rebuilt, I can only burn to dvd-r/rw/ram.

  I restored from my laptop to the picture created by Acronis and can use the drive normally again to burn + and - DVD.

  Does anyone know why this would have stopped working in the new installation of Windows? I also tried to create a virtual machine using the same xp disc but it always gives me the problem of dvd player.

  Thank you

  Rich

  Hello rich

  Have you noticed the same problem after using Toshiba designed recovery DVDs?

• IDE error - unrecognized DVD player - Satellite 2410-504 #1

  Hello, recently I got a rug * a dvd - ram UJ - 831 s Reader installed to replace by my insurance policy in my Toshiba Satellite s2410-504. The car worked well until recently, when I get the IDE #1 error at startup, then the drive does not appear in Windows - Win Explorer or Device Manager. I tried to update the firmware for the recommended: DVD + r / + RW/RAM Drive(UJ-831) F / W revision: V102. But I got the message that the drive is not connected when I am asked to open it. I want to emphasize that I tried this update when the drive is actually (sometimes is just appear randomly, sometimes it appears after the release of the standby mode)

  I also tried 4 or 5 times the resettlement of the drive with no luck. How can I fix my drive? I have read on the bypass and master/slave problems but not too sure about this or if it's the right thing to do.

  Thanks in advance for your help,
  David

  Hmm, it would be very interesting to know if this message appears.
  For me, this looks like an auto damage with a bad firmware.

  > I get the message that the drive is not connected when I am asked to open it
  For most of these messages are displayed if the drive is not connected OR the firmware was bad. I think that it s because of the second possibility.

  Maybe the firmware has changed the master/slave/c-salt settings and now the BIOS does not recognize the disc correctly.

• Equium A60-157 freezes after inserting the DVD

  Hi all
  When I insert a dvd in the carpet * a DVD-Ram UJ-820 dvd my laptop ram player freezes (sometimes) I am running WinXP SP2 with nero 6 reloaded and dvd shrink it started before the loading of dvd shrink, I'm on AOL.

  This could be a problem?

  Hi Paul,.

  You don't say what kind of DVD that you use in your laptop. You try to play a prerecorded DVD or you load a blank and ready for recording?

  Nero 6 includes a utility called INCD that usually runs at boot time and is designed to detect and format blank disks when they are inserted (or possibly it could be invoked manually). It is possible that this is suspended and causing your notebook to 'freeze '. Make sure you have the latest versions of the product placed on the web site AHEAD NERO 6.

  Kind regards

• Satellite A50-104: after DVD drive upgrade - error IDE #1

  Hello

  I have a Toshiba satellite A50-104 and to replace the SD - C2612 DVD standard player for a NEC ND - 6750 A DVD Writer but after reinstalling the drive and turn it on I get a message of ERROR IDE 1 before windows XP starts up and the drive is not recognized. I tried to detect the drive by using the Add Hardware Wizard, but it does not detect.
  Can you please help.

  Regards Gary

  Hello

  I'm not sure but I think that the Toshiba DVD r /-RW / RAM (number P000399450) drive must be compatible with the Satellite A50.
  It is also called DVD Super Multi drive, UJ-820BTJ6-A (G8CC0001S210)

  I found it on this page:
  http://www.impactcomputers.com/p000399450.html

  But generally the best way to control the compatible parts and devices is to contact Toshiba service partner in your country.
  Here, you will get all Hamade on the right parts.

• A6000n PC DVD drive replacement

  I have an old HP Pavilion a6000n desktop PC computer that I've updated Vista to Windows 7 I.  The DVD eject button is unresponsive and I am wanting to buy a replacement.  I looked at the specs for the DVD player and found that this is a 'drive 16 X DVD (+/-) R/RW RAM (+/-) R DL LightScribe"but it does not specify whether it uses an IDE cable or SATA connection and looking around site of HP and the internet in general didn't give me any help.  Did anyone know, so that I could buy the correct replacement for my computer drive?  Please help, thanks.

  MFonnesbeck

  Thank you for all your advice.  I looked inside my computer case and found that the unit uses an IDE cable (you were right @wb2001 - my computer was difficult to access, being hidden under a desk, and so I was trying to avoid that, so my @lasvegaswireman questions).  I saw 3 other available ports for SATA connections (as @Paul_Tikkanen said) and a power cable which forks 2 fittings power Molex and ended with a SATA power connection.  I looked around and couldn't find a DVD IDE burner (right once again @wb2001), unless I went used, so I decided to buy a new HP DVD burner that happened to come with a SATA cable.  So I have a SATA cable connection, I have SATA power cable connection and ports available to connect, so I should be good to go.  Thank you all for your comments and for pushing me just open my computer and watch.

• Optiarc dvd rw ad - 7561 has ata device

  My optiarc dvd drive does not work with dvd + R DL. Is this normal?

  ostlokla1

  Hello

  It should work with both + and - R discs.

  It's the version of HP of its description:

  Original HP AD - 7561a Support LightScribe technology 8 X DVD +/-R/RW/RAM DL writer

  =======================================================

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Burning at low speed, or by using the master could help. Maybe a CD/DVD cleaner
  Help.

  CD have a tolerance + - and you can write on the edge outside their tolerance. They
  may be released but it is usually more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  --------------------------------------

  To solve the problems:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help needed recovery for Equium A300D - 13 X

  Hi all

  Having experienced too many problems for the list with my satellite a 300 d 13 X, hardware and software, I decided to go ahead with a restore to the factory settings.

  My first step was to create 2 discs recovery DVDs, using the Toshiba Recovery Disk Creator.
  As far as I know, two recovery disks were created with success, insofar as the recovery disc creator has stated as such.

  Not knowing what step to take next, I started the laptop with the fist of the disc in the disc drive, two thinking recovery that it would reset the laptop to its factory settings, but it does not.

  Now, when I start the laptop, I get the following message;

  BOOTMGR is missing
  Press Ctrl + Alt + Delete to restart

  who restarts the laptop showing the above message again.

  By pressing F8 at start up does nothing.

  By pressing F12, multi boot selection, reveals a start with 3 options Menu;
  HDD1: TOSHIBA MK2046GSX-(S1)
  CD/DVD: MAST * ADVD-RAM UJ - 850 S-(PM)
  LAN: Marvell Yukon 88E8040T

  If I select the CD/DVD option, a black screen with the text;

  Windows is loading files

  is shown. I am guessing it is the correct path to recovery.
  However, after the screens following recovery about the language selection utility etc., a text filled with the dialog box

  X:\windows\systems32\cmd.exe

  Cross, but eventually reached a static state line:

  Copy of F:\06948XSP.swm to V:\HDDRecovery\SWImg 1/6

  without to successfully complete the recovery process.

  Any help to fix this would be greatly appreciated.
  Kind regards
  KeV.

  > My first step was to create 2 discs recovery DVDs, using the Toshiba Recovery Disk Creator.
  > As as far as I know, the two recovery disks have been successfully created, insofar as the recovery disc creator has stated as such.

  What to tell buddy you've done everything right.
  The recovery disk was created successfully (you saw a message saying this?).
  Boot from recovery disk should start the collection procedure and you must follow the installation on the screen.
  Usually, this should work.

  The error; BOOTMGR is missing says that boot manager on the HARD disk has been removed and it of not possible to boot from the HARD drive.
  You must boot from the CD you have done; by pressing F12 choose CD/DVD drive

  Try to format the HARD drive using another CD of Windows.
  In this case, you need to set SATA compatibility mode in the BIOS, then you could boot from the WinXP CD.

  After that try the recovery disk again

• Portege M800 - SSD, lag of 30 seconds before the start after POST

  I have recently upgraded to an Intel Postville's G2 X 25 - M 80 GB SSD and experience a second rule 30 between the BIOS POST (black screen) and actual boot from the disc. Support of the Intel says that it is probably a BIOS problem and that I should install the latest firmware, which I already did (4.80).

  System: Windows 7, 127-Portege M800-127 PPM81E M800.

  Hello

  I guess that this shift will be caused due to the BIOS test. After you turn on your laptop it checks internal devices like HDD/SSD, CD/DVD disk, CPU, RAM, etc. So some of the material was originally this delay, I think.

  If the latest BIOS can't solve your problem, it would be interesting to know what is happening with a SSD of replacement. Can you check that out, please?

• Satellite A100 - turns off the power after 60 seconds

  After pressing the power button, the laptop starts but 60 seconds from the moment it is activated, the it turns off suddenly?

  The fan turns, I tried cutting dvd, wireless, modem, ram, hard drive, it opens and clean all the dust. It turns off after 60 seconds exactly every time

  Any ideas?

  Thank you
  Ben

  Hello

  > and clean any dust
  How did you do that?
  Usually, you can use jet of compressed air to clean the laptop and remove the dust that blocks the fan. That is why it s not necessary to disassemble the laptop as you can read here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  And the same thing happens if you access the BIOS instead of starting in Windows?

• Satellite P205-s6287 does not illuminate

  I have the laptop for a little over a year (warranty expired). No problems until now, but now will not start.

  It has the power, but that's all. Can not run the HDD, noting shows up on top of the monitor. The fan works and heats up, the screen is black, hard drive light begins to shine for only a second after the Start button / stop is pressed then turn on ever. DVD player will turn a DVD but does not have a bootable DVD. Remove RAM produces no beeps.

  Connect an external monitor does not video.
  Did someone there some problem? What could be?

  Try this: remove the battery and unplug the AC adapter, wait 30 to 40 minutes and plugging the AC/DC adapter and turn on the laptop without the battery first.

  Tell me what happened.

• Satellite replacement CPU L500-214 - Intel HM55 chipset

  Yes, I have read the info on not support replacing the CPU in Toshiba laptops and suggesting to change/add/replace only dvd, the memory RAM or HD disc burners.

  My question is: is it possible to put a better processor in my laptop (chipset supports a lot) or is the computer limited by the BIOS (version 2.10) to not support that the CPU came with the laptop?

  I tried to replace my i3 330M with i5 480M and i5 540 M, but the computer does not even start (not even BIOS, not even the screen).

  Is there no work around to make it work with another processor chipset and support?

  Would be very grateful for any help in this matter
  Greetings from the Poland

  > My question is: is it possible to put a better processor in my laptop (chipset supports a lot) or is the computer limited by the BIOS (version 2.10) to not support that the CPU came with the laptop?

  The CPU usage may be limited by the BIOS too, but it would also be possible that laptop would be in relation to other processors supported by the chipset. This info isn't provided on pages notebook manufacturer because as you know upgrade CPU is definitely not supported.

  However, I found the ARK chipset page and details on processors supported by the chipset
  http://Ark.Intel.com/products/43183/Intel-bd82hm55-PCH

  I think you have a good chance to get the laptop running with processors listed on the Intel site, but of course, it s just my personal opinion.

  > Is there no work around to make it work with another processor chipset and support?
  There is no other alternative workarounds or updates... either the laptop would go with CPU new or not, and it's your risk and peril :(