Satellite Pro A100: Mat * a UJ - 841 s DVD Multi drive does not

Similar Questions

• CD/DVD-Rom drive does not not on Equium A100

  I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?

  I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.

  .. .Please help me... I think it is the driver, but I don't know how to fix it.

  Hi mate

  > I installed a webcam, and it made my DVD - rom drive does not not with all drives
  To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
  I see really no connection between the webcam and ODD... very strange
  Do you get any error messages?

  Anyway, in my opinion, you should try these solution ideas;

  (1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.

  2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  .. then restart the laptop.

  (3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.

  If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.

  Best regards

• DVD - RAM drive does not appear in my computer (Satellite M30)

  Hello
  I have a rug * a DVD-RAM UJ 820 in a Satellite M30
  It seems that the driver does not work and the DVD unit is not showing in my computer - the device however seems to work - I was told a solution may be to download the driver and re-install again. Any idea where I can get that? You have any other suggestions on how to fix this?

  Thank you

  Hello

  drivers are located on the download site for the driver from Toshiba:
  https://EU.computers.Toshiba-Europe.com
  under Support & downloads, download drivers

  If this does not help, look around this forum. I saw some other threads on this DVD player.

  Good bye

• E300 satellite - DVD Ram drive does not work with Win 8

  Hello

  I get an error message on my dvd - ram drive - Mat * un UJ8A0AS DVD-RAM

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I tried the solution of Microsoft Web site for this problem, but it did not work.

  Is someone able to recommend a fix for this problem. Tried to uninstall and reinstall the device without result.

  Have you tried to remove the device from Device Manager and reboot the laptop?
  After reboot of the device will be recognized and installed again.
  Please, do it and see if the problem still occurs.

• Satellite L300-1CU-DVD-rom drive does not work in Win7

  Hello

  I have IMPROVED MY TOSHIBA Satellite L300-1CU FOR WIN 7 NOW cd rom (MAST * one UJ880AS DVD RAM) quit working. DRIVE USED DOOR OPEN WHEN I CLICK ON THE DRIVE IN EXPLORER (DVD RW drive (D :)) MESSAGE SAYS "PLEASE INSERT a DISK INTO DRIVE D:" what I'VE DONE.))

  I DELETE THE UPPER & LOWER EDITORS IN THE REGISTRY AND UNINSTALLED THE DRIVER DVD AND STARTED RE! NOTHING HAS WORKED, PLEASE COULD YOU HELP?

  SO THAT THE UPGRADE OF THE SYSTEM OF THE UNITED NATIONS INSTALLED TO VARIOUS PROGRAMS OF TOSHIBA... !

  Did you upgrade using the Toshiba upgrade kit or you installed Win7 clean and clean installation?
  Can you confirm that the optical disc drive works well with factory settings (Vista preinstalled original)?

• Satellite A660 DVD/CD drive does not detect disks

  Hello

  I have a Toshiba Satellite A660 with a CARPET * A BD - CMB UJ141ES DVD/CD-ROM. It is around the age of 18 months and recently I noticed that it does not recognize the CD/DVD. He made a few noises once inserted but then stops spinning and nothing happens or changes in my computer.

  Please note that there seems to be no apparent problem with the reader:
  -It is present in my computer
  -The device works correctly in Device Manager

  I already tried things:
  -Run Microsoft FixIt and troubleshooting of CD-ROM/DVD - both said that he could not recognize media
  -Remove the upper filter in the registry according to the many suggestions (this lower filters)
  -Update driver

  I don't know what else to do. Please help because it's frustrating for a relatively new laptop which is never left my office (don't expect much damaged parts).

  See you soon

  Hello

  Try to clean the lens of laser disks using a cotton ball and alcohol tip.
  Dilute with gentleness and precaution
  I know that in many cases, this simple workaround solution helped.

• Satellite P300 - 19 p: impossible to install WIn XP IMSM driver - does not meet minimum requirements

  Hey there,

  I just finished installing Windows XP Pro (32 bit) and have encountered a problem during the installation of a driver of some.

  When I try to install the driver IMSM Intel 7.8.0.1012 I get this error message "error: this computer does not meet the minimum requirements for the installation of this software, the installation program closes.

  Help, please
  Brad

  Post edited by: stickmen404

  What version of Windows you have installed, SP1 or SP2?
  Have you changed your settings of the SATA controller in the BIOS?

  In the end, I think you don t he need at all. I installed Windows XP Home on A300 and have the same problem. Without this driver WXP THAT works well.

• Satellite M40-185: DVD super multi drive does not read the CD

  I own a Toshiba Satellite M40-185. It is mounted with a carpet * a DVD-RAM UJ - 831S.
  When I put the CD - R, which are supposed to work on this drive however it read as a CD - R [i.e. the icon changes from DVD - RAM drive in my computer to a CD - R]

  However, when you double-click the drive it says D:\ accicble not. But it works fine with DVD.
  Recently, I found that it stops between buring DVD as well. I got the replaced disk from Toshiba, but it was not to last long either.
  I wonder if his software level problem.

  I tried to update the firmware but it does not work because it's another drive for this what is mentioned on the website for drivers...

  Maybe it s only a registry error?
  I read different statements here in the forum and especially the deletion of in the upper and lower registry filters helps to address these issues.

  For more information, see this page of Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and then restart the laptop

  Good luck

• Satellite Pro A100-302: what is maximum size of HARD drive?

  Hello

  Someone who knows the maximum capacity on the hard drive of this laptop? Original is 100 GB, is it possible to upgrade to 320 GB?

  Elegant

  Hello

  I think that it should be possible to use a larger HARD drive.
  The laptop supported a SATA controller and in my opinion, you should be able to use hard drives SATA 250 GB or 320 GB

  Good bye

• CD/DVD-RW Drive does not write on Satellite Pro M75

  Hello

  Im having problems burning CD and DVD on the drive. I have some media in itunes (which i baught! also I have made a backup of the original!) and I want to put on a disc, so I make a new playlist as usual, then I put the disc in and then click on "Burn to CD" so I do... it burns a song, but she then said that there is an error. Also when I try to burn a video I have made through DIVx and happens to 1% and an error occurs. screwing of the disks.

  Also when I try and format the DVD - RW with Sonic DLA thing - it gets to 5% and then it says: 'cannot continue because of the General faliour' which is also very annoying also.

  What should I do? What is the hardware or software.

  Thank you

  Joly

  Hello

  is this error happening since you have this computer or from a specific point. Would be interesting when the problem started, maybe some software is defective drive and causes this error you have.

  Please give some detailed comments and describe what you were doing in recent times with the machine and the fact that you have installed a software or something else.

  Would appreciate some comments.

  Welcome them

• DVD/CD drive does not at all on Satellite A100/A105 Series

  Hello

  My CD-ROM/DVD-Rom went completely unoperative. The LED does not blink and it is not ejected, with the key or with a software command.
  The drivers are listed as being activated, they are:

  LP3307P RPB109J SCSI CDROM DEVICE
  YN2495K TDG329D SCSI CDROM DEVICE

  The only reason that I can think of is that while twisting my startup with MSCONFIG process I have somehow turned off my drive.

  Thank you very much for your help.

  Alan

  Hello

  It looks a bit like a malfunction of the equipment.
  I came to this conclusion because the start of the recovery disk is not possible too.
  Therefore, it would be advisable to contact a technician for laptop for a CD/DVD drive control and the replacement.

  Welcome them

• Satellite Pro A200 - vertical scrolling on the touchpad doesn't work does not after update

  Hello

  My A200 told me that I needed to update the drivers for my touchpad. I did it and now I can't use the vertical scroll feature. I looked on the site Web of Synaptic and there is nothing there to help. I checked to see if I have the drivers updated and I do, and I've looked through the settings of the mouse and can't find anything that will help you.

  Can someone help me please?

  Thank you very much
  Ian

  Hi Ian

  Why you n t trying to roll back the BONE to this early time?
  I mean the point OS before you installed the touchpad driver

  Usually, this should help to recover the functions first touchpad.

  Best regards

• P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

  Version of Windows 10 Home 1607 (Build 14393.187)

  Hello

  After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
  The D: drive does not appear in Windows Explorer,
  CD-Audios and videos / DVDs do not work.

  In the Device Manager, the following legacy status error message appear:
  "Windows cannot start this hardware device because its configuration information.
  (in the registry) is incomplete or damaged. (Code 19). »

  Could you tell me how to solve this problem?
  Thank you.

  The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
  I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

  More information here:
  http://www.borncity.com/blog/2007/08...-verschwunden/

• Satellite A500 DVD/CD Driver does not (can't read the discs)

  I want to install the new Windows 7 and I insert the disc. Nothing happens. I go to my computer and try to open the disk drive or explore this and it shows nothing.
  I checked with other CD and it does not work. DVD do not work tho...

  What's wrong?

  Hello

  Maybe it's dust on the lens you have clean the lens using a microfibre cloth? If this is not the case, check this box!

  You should try to remove the top and lowerfilteres in the registry of the alternative. Follow the instructions of this workaround MS:
  http://support.Microsoft.com/kb/314060

  I had a similar problem and after removing the upper part and the lowerfilters it worked again! :)

• Satellite A300-1NO: super multi drive does not work

  Hello again.

  I have a big problem (as every day since I have this laptop).
  My DVD multi writer rarely does not work.

  When my system starts up, it works very well, and he can read everything, no problem.
  But after several hours, it is simply not open.

  The orange LED flashes for a second, but do not open it.
  When I restart my sytem, everything works well again... What do I do? It is so boring.

  It's on my desktop, I do not...

  Hello

  If the CD/DVD drive is not ejected automatically by pressing the button and then try to open it manually using a small thin object. Insert it into the tiny hole near CD. Diving DVD eject button.
  This should allow you to open the ODD.

  But if it will always happen, then I recommend you contact the ASP in your country in order to verify this CURIOUS.
  Maybe the drive needs to be replaced