Qosmio G20-127: after firmware update cannot burn CD or DVD

Similar Questions

• Qosmio G20-127: after that Windows update I can not see list fax and printer

  Description of the problem
  Model: Toshiba Qosmio G20-127
  Operating Sysytem: Microsoft Windows Media Center Edition

  After the restoration of BONE of restore DVD, I can see list Fax and printer. But after the Windows Update I can not see the list of fax and printer and cannot run the Wizard "add a printer".

  I just installed printers.

  It seems that it s a Microsoft Windows problem and it s not bound Toshiba laptops
  See this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/823447/

• Qosmio G20-127: failure to screen after closing the lid on Vista

  Hello

  I have a Qosmio G20-127 and I recently installed Vista Ultimate (32 bit). I managed to put everything in its place (except the magic buttons, but the drivers are not on yet), but I have a problem that makes me seriously reconsider coming back to XP MCE.

  When I close the lid of my computer, the screen turns off of course, but when I open again, it does not turn, but it stays black. And I can't turn it on again no matter what. I have to turn off the entire computer and it is quite unrealistic.

  Funny is that after a restart for about 20-30 minutes, I can open and close the lid normally, but the same problem occurs after a bit more time to work on the computer.
  The problem persists even though I disabled everything remotely connected to the closing of the cover.

  Does anyone have a solution?

  Hello English

  Try you update the BIOS on the VISTA OS?

  I can imagine you will always find something new and unusual, but please note that Vista is not supported by the OS for Qosmio G20 (Vista drivers are not available on the Toshiba download page) and you can expect that from time to time, you will discover new disturbing behavior.

  I recommend you to install and configure Vista as described in the topic of s Francisco, configure OS for your needs, and be happy if you use Vista without any serious problems. In my opinion, for OS installation and configuration software Qosmio is Toshiba laptop more complicated template, and you will never be able to configure it as a supported and preinstalled WXP MCE. Commands supported are tested and bugs are fixed, but not with Vista on Qosmio G20.

  Sorry my friend. Sounds stupid, but maybe that's just the truth. By the way: I like Qosmio G20. Maybe I'll buy one if the price is Ok.

  Good bye

• Disabling Raid in my Qosmio G20-127? !!

  Can someone help me how to disable the raid in my Qosmio G20-127
  Coz, I bought norton system works 2008 the Prime Minister, but I can not install the new 4.1 goback coz I have raid on my laptop
  & goback is important to me.
  Experts please I need your advice
  Thanks aloot

  Hello

  The RAID can be disabled in the BIOS!
  You must select the 3rd page of the BIOS, and then you will receive these options.

  How to enter the BIOS?
  Well, press ESC, then F1 immediately after that the laptop was turned on.

  But note; If you change the RAID option, you will lose all the data and the operating system must be installed again!
  For RAID details, see your user manual! You will find all the information necessary and important.

  Good bye

• Drivers of WIDCOMM 5.0.1.1200 Qosmio G20-127

  Is it possible to install software drivers Widcomm Bluetooth on Qosmio G20-127? I want to use them instead of Toshiba and Microsoft Bluetooth stacks. I modified the btwusb.inf file in Widcomm 5.0.1.1200 with my own PID and VID (taken from the Toshiba inf file) but I'm unable to install the drivers again.

  Hi Alex

  You will be very happy if someone can give you a correct and precise response to this topic. As you know Toshiba doesn't support and test some third part software.

• Kingston KTT533D2/512 for Toshiba Qosmio G20-127 RAM memory

  I'll install additional 512 x 2 sticks of RAM in my computer Toshiba Qosmio G20-127. Someone has already installed RAM Kingston memory? BTW, how many RAM slots in Qosmio is? There are 4?

  Hello

  Just 2 slots are available. The device can handle with 2 GB max. unfortunately I can't tell you anything on the module of RAM Kingston, but the Configurator Kingston said that these modules are compatible should avoid any problems.

  Good bye

• Qosmio G20-127: how to upgrade the GPU

  Hello

  I want to change the video card in my Qosmio G20 - 127 better one. Can anyone tell me, is this possible and what video card I can use.

  Hello

  I can tell you that this is not possible because the GPU is still welded on the map and it of not possible to remove it on an ongoing basis.

  So unfortunately, but you o forget him!

  Welcome them

• Qosmio G20-127: very strange noise coming from HARD drive

  so...
  I have a problem with my "hdd2" I believe that I have a Qosmio G20-127
  It all started yesterday... and now it's like this (http://www.youtube.com/watch?v=D3Pzea1xMR8) this noise that makes me sic.

  Please help me and tell me what to do to get rid of him...

  Thank you.

  You sound queue is no longer available ;(
  But if you're 100% HARD drive makes any strange noises, then you must create a backup of HARD drive.
  Several months ago my HARD drive died and the day before I noticed some strange noises. Today, I know it's HDD ;(

• Qosmio G20 - 127 connection with plasma TV

  What is the best way to connect the Qosmio G20-127 with plasma Panasonic TV? Plasma TV has HDMI port. Should what cable I be able to connect to the HDMI port?

  Hello

  The Qosmio G20-127 supports a component port (D-video output port)
  You can connect you laptop to TV with a D-video cable.
  You can google a bit and you will find a lot of offers.

• Drive necessary recovery for Qosmio G20-127

  Hello

  I would ask, can someone help my, I lost my recovery disc (Qosmio G20 - 127 Xp MCE) and can't download via serial on toshiba.com said that the old model.

  I put t know what to do.

  Thanks in advance :)

  Saved on DVD recovery disc recovery image can not be downloaded then don t spent yout time looking for him.

  You can download are all necessary drivers, tools and utilities and you can use if you decide to install the clean version of Windows XP Home edition.
  Problem is that this Qosmio is old enough and I don t think you will be able to order the new DVD of recovery for her.

  What you can try is to contact Toshiba nearest service and ask if they can get a Cie for you.

• Need driver audio for Vista - QOSMIO G20-127

  Hi mates,

  I have a Qosmio G20-127 (PQG21E) series. I try to install Windows Vista, but I have no driver sound for this machine. If anyone knows the solution for sound please help me and send me a mail on [email protected]

  Concerning
  AZHAR

  Hello

  I do not have a Qosmio G20, but everything you want to know about Qosmio G20 and Vista you will find under http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=75318 or other subjects where FranciscoJr posted.

  Good luck!

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After that update cannot open creative cloud desktop administrator, how to go back to simply click to open?

  After that update cannot open creative cloud desktop administrator, how to go back to simply click to open?

  Run as Administrator http://forums.adobe.com/thread/969395 measures to permanently assign FULL permissions

• Qosmio G20-111: after disk HARD changing the Media center does not work

  Hi, I have a WME Quosmio G20-111, after a hard drive, toshiba support center evolution (disc hard bone) in Italy has reinstalled the WME but whenever I try to use the Media Center pc crash and show me a white screen. After several phone call they told me that the problem is that they don't update quosmio drive drivers?
  I'm desperate, any suggestions?

  [email protected]

  Hello

  Well, as far as I know that the Qosmio Player has been installed on the partition hidden on the new laptop, but perhaps the ASP is not install this application after replacing HARD drive.

  But I do not understand why the missing Qosmio Player should have a bad influence on the media library? MC is a Microsoft program that is part of the Windows XP MCE. Player of Qosmio is an invention of Toshiba and should have nothing to do with the MCE.

  However, you can try to install the Qosmio Player and then try to recover the entire operating system with the recovery CD Toshiba original delivered.

  Maybe it helps.

• OfficeJet Pro 8620e ADF jam error after firmware update

  After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

  I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

  This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.