DW 8 with connection mysql - no tables

Similar Questions

• Limitations associated with connection tables to UCS FIs live.

  I understand that to connect directly a table of UCS, the FIs have put (NPIV) mode of the switch.  But once you are the FI in Switch Mode, it is impossible to join other SAN switches in the fabric interconnects?

  It is my understanding that you could do because it would be very different then a SAN fabric stretched to move through FC 2 switches to a host table traffic.  But maybe I'm missing something.

  Thanks in advance.

  You can directly attached storage and FC switches at the same time, in fact until recently it was required since UCS did not zoning.

  http://www.Cisco.com/c/en/us/support/docs/servers-unified-computing/UCS-...

  The question is if you really want to do it this way, I think 95% of deployments, if not more, fine host mode is recommended.

  If you already have the intention to attach switches FC, better place storage on them.

  Take a look at drawings FlexPod (of Vblock).

• I am new to FDQM I need to connect from the table Source 'Oracle '...

  This is the first time for me to do this, you have any Document to the connection on the Source table in Oracle, to any table target using FDQM
  is it valid?
  If valid how can I make the integration with FDQM...?
  I called ODI,
  Can be defined from any source to any target,
  In FDQM I can set to take data from the Source of the table is Oracle to load in the EPM or any target system.
  
  Published by: Joe on December 10, 2011 19:52

  Please refer to paragraph "Example of Script integration" on page 200 of the FDQM 11.1.2 administration guide.
  This example connects to a SQL Server table (you may have to tweak it a little so you can connect to Oracle table), but the example can give you a good impression of what is necessary to establish a direct link.
  Kind regards
  Jeroen

• Insert a special character such as apostrophes with PHP/Mysql

  Hi friends,

  I have a problem with php/mysql. I created a form vach'inton a page php with dreamweaver and when I try to fill in the form with a string that contains an apostrophe ('), I got an error. It seems that integration is not possible. Would you have any idea for that. I give you the code of dreamweaver php and thank you for your help.

  <? php require_once('Connections/Mainconnect.php');? >

  <? php require_once('Zend/Date.php');? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  If ($theValue =="")

  {

  $theValue = "NULL";

  }

  on the other

  {

  $zendDate = new Zend_Date($theValue,"dd/MM/yyyy");

  $theValue = "" "." $zendDate-> toString("yyyy-MM-dd"). »" « ;"

  }

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  $editFormAction = $_SERVER ['PHP_SELF'];

  If (isset {}

  $editFormAction. = « ? ». htmlentities($_SERVER['QUERY_STRING']);

  }

  If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "form1")) {}

  $updateSQL = sprintf ("UPDATE pers_soc_reg SET Field1 = %s, Field2 = %s,

  GetSQLValueString ($_POST ["field1"], "text").

  GetSQLValueString ($_POST ["Field2"], "double"));

  Hello friends,

  I solved the problem.

  The problem is a free extension for dreamweaver called 'check new items' of Felixone. After his retirement, all forms of work without problem.

  Thanks to you all.

• Problem connecting MySQL DW CS4

  I know this has been covered at the front, but I have been trawling through messages for the last 2 days and still have not solved my problem.

  I remember using Studio MX and Ultradev that establishment of a connection may be difficult. It seems that CS4 is all too little friendly in this regard. I know the settings I use for connection must be correct because I use them to connect to the database and view its files using a page coded manually with success. I tried to disable Kaspersky and Windows Firewall, to no avail. I noticed a difference between the php script that dw has tried to do and mine, I use mysqli while the dw version just talking about mysql. When I click on the Select button to try, and then select the database, I just get "an unidentified error has occurred" - about as much use as a chocolate fire - well made for the development team of dw for that Pearl of wisdom. Is dw trying to find my database somewhere where it is not located? I noticed that C:/InetPub and its subfolders are marked 'read only', but when you uncheck it, it resets the read-only - I don't know if this may have something to do with my inability to establish a connection. I managed to manually set up MySQL, PHP and Apache without problems, but it made me beat. Is this bad design in dw or am I just stupid? Don't answer that! Any help would be greatly appreciated because I know that there are many good things in dw if I could only make a connection (and I'm on a test with this 30-day) why should something that looks so easy be so difficult! Thank you, Mark

  Hello

  Dreamweaver does not support the connection MySQLi (or AOP one). Check that your php Setup has the installed standard MySQL login script and use that for the moment, (don't know but maybe that CS5 will support MySQLi or PDO).

  PZ

  www.pziecina.com

• Problem with connection by level

  Hello
  
  
  My desired goes something like this: I would like to generate the dates of hiredate to systdate with an interval of one month. The code that I have to return works well for single empno. I want to generate the dates of hiredate to sysdate with a gap
  one month for all employees (empno). Commenting on the code to find out where empno = 7369 does not work and the system a lot of the CPU usage.
  
  Hiredate were suppose to be to_date('01-jan-10') for empno = 7369
  
  examples of code goes something like this:

  select ADD_MONTHS(trunc(to_date('01-jan-10')),LEVEL-1)
  from dual
  connect by level <= trunc((sysdate-to_Date('01-jan-10'))/30 )

  code for the emp table

  select ADD_MONTHS(trunc(hiredate),LEVEL-1)
  from employee
  where empno = 7369
  connect by level <= trunc((sysdate-trunc(hiredate))/30 )

  Please advice

  You should stay with double to generate numbers. You can use the caluase WITH to create a table that contains only the relevant dates.

  The min max values for the datatab ann might be emp Subselects.

  example not tested

  with datatab as (select ADD_MONTHS(trunc(to_date('01-jan-10')),LEVEL-1) mon
                         from dual
                          connect by level <= trunc((sysdate-to_Date('01-jan-10'))/30 )
                         )
  select *
  from employee e
  join datatab d on e.hiredate <=d.mon
  where empno = 7369;
  

  Well, there are other ways to do it. Maybe you can provide some examples of data and also some of the desired output.

• Performance issue with connection of a level query

  Hi I have a problem with connection by level in oracle.
  
  My table is:
  
  
  J_USER_CALENDAR
  --------------------------
  
  USER_NAME FROM_DATE TO TO_DATE COMMENTS
  -------------------------------------------------------------------------------------------------
  Comment1 5 November 09 uma Shankar 2 November 09
  Veera 11 November 09 13 November 09 Comment2
  Commnet3 17 December 09 uma Shankar 15 December 09
  Vinod 20 October 09 21 October 09 Comments4
  
  
  The table above is the calendar of user authorization.
  
  Now I need to view the users who are on leave between November 1, 2009 to November 30, 2009
  
  The output should look like:
  
  
  USER_NAME FROM_DATE COMMENTS
  ---------------------------------------------------------------------------------
  Comment1 2 November 09 uma Shankar
  Comment1 3 November 09 uma Shankar
  Comment1 4 November 09 uma Shankar
  Comment1 5 November 09 uma Shankar
  Comment2 Veera 11 November 09
  Comment2 Veera 12 November 09
  Comment2 Veera 13 November 09
  
  For this, I tried with the following query, but it takes too long to run.
  Select FROM_DATE, user_name, comments from (SELECT distinct FROM_DATE, user_name,
  Comments FROM (SELECT (LEVEL) + FROM_DATE-1 FROM_DATE, TO_DATE, FIRST_NAME |) » '|| LAST_NAME
  user_name, COMMENTS OF J_USER_CALENDAR
  where
  and J_USER_CALENDAR.IS_DELETED = 0
  CONNECT BY LEVEL < = TO_DATE - FROM_DATE + 1) has) where ("FROM_DATE = 1st November 2009 ' or FROM_DATE = November 30, 2009")
  or FROM_DATE between November 1, 2009 "-November 30, 2009") order of from_Date, lower (user_name)
  
  Please help me.
  
  Thanks in advance.
  
  Kind regards
  Phanikanth

  I have not tried to analyze the SQL statement.

  Here is a test set in place:

  CREATE TABLE T1(
    USERNAME VARCHAR2(30),
    FROM_DATE DATE,
    TO_DATE DATE,
    COMMENTS VARCHAR2(100));
  
  INSERT INTO T1 VALUES ('Uma Shankar', '02-Nov-09','05-Nov-09','Comment1');
  INSERT INTO T1 VALUES ('Veera','11-Nov-09','13-Nov-09','Comment2');
  INSERT INTO T1 VALUES ('Uma Shankar','15-Dec-09','17-Dec-09','Commnet3');
  INSERT INTO T1 VALUES ('Vinod','20-Oct-09','21-Oct-09','Comments4');
  INSERT INTO T1 VALUES ('Mo','20-Oct-09','05-NOV-09','Comments4');
  
  COMMIT;
  

  Note that I have included an additional line, when the person starts their vacation in the previous month and ends in November.

  You could approach the problem like this:
  Assume that you want to appear every day in a given month:

  SELECT
    TO_DATE('01-NOV-2009','DD-MON-YYYY')+(ROWNUM-1) MONTH_DAY
  FROM
    DUAL
  CONNECT BY
    LEVEL<=ADD_MONTHS(TO_DATE('01-NOV-2009','DD-MON-YYYY'),1)-TO_DATE('01-NOV-2009','DD-MON-YYYY');
  

  Note that the above attempts to calculate the number of days in the month of November - if we know that the month has a certain number of days, 30 for example, you can rewrite the CONNECT BY clause like this:

  CONNECT BY
    LEVEL<=30
  

  Now, he must pick up lines of interest to the table:

  SELECT
    *
  FROM
    T1 T
  WHERE
    (T.FROM_DATE BETWEEN TO_DATE('01-NOV-2009','DD-MON-YYYY') AND TO_DATE('30-NOV-2009','DD-MON-YYYY')
      OR T.TO_DATE BETWEEN TO_DATE('01-NOV-2009','DD-MON-YYYY') AND TO_DATE('30-NOV-2009','DD-MON-YYYY'));
  
  USERNAME        FROM_DATE TO_DATE   COMMENTS
  --------------- --------- --------- ----------
  Uma Shankar     02-NOV-09 05-NOV-09 Comment1
  Veera           11-NOV-09 13-NOV-09 Comment2
  Mo              20-OCT-09 05-NOV-09 Comments4
  

  If join us then both sets of results, we have the following query:

  SELECT
    *
  FROM
    T1 T,
    (SELECT
      TO_DATE('01-NOV-2009','DD-MON-YYYY')+(ROWNUM-1) MONTH_DAY
    FROM
      DUAL
    CONNECT BY
      LEVEL<=ADD_MONTHS(TO_DATE('01-NOV-2009','DD-MON-YYYY'),1)-TO_DATE('01-NOV-2009','DD-MON-YYYY')) V
  WHERE
    (T.FROM_DATE BETWEEN TO_DATE('01-NOV-2009','DD-MON-YYYY') AND TO_DATE('30-NOV-2009','DD-MON-YYYY')
      OR T.TO_DATE BETWEEN TO_DATE('01-NOV-2009','DD-MON-YYYY') AND TO_DATE('30-NOV-2009','DD-MON-YYYY'))
    AND V.MONTH_DAY BETWEEN T.FROM_DATE AND T.TO_DATE
  ORDER BY
    USERNAME,
    MONTH_DAY;
  
  USERNAME        FROM_DATE TO_DATE   COMMENTS   MONTH_DAY
  --------------- --------- --------- ---------- ---------
  Mo              20-OCT-09 05-NOV-09 Comments4  01-NOV-09
  Mo              20-OCT-09 05-NOV-09 Comments4  02-NOV-09
  Mo              20-OCT-09 05-NOV-09 Comments4  03-NOV-09
  Mo              20-OCT-09 05-NOV-09 Comments4  04-NOV-09
  Mo              20-OCT-09 05-NOV-09 Comments4  05-NOV-09
  Uma Shankar     02-NOV-09 05-NOV-09 Comment1   02-NOV-09
  Uma Shankar     02-NOV-09 05-NOV-09 Comment1   03-NOV-09
  Uma Shankar     02-NOV-09 05-NOV-09 Comment1   04-NOV-09
  Uma Shankar     02-NOV-09 05-NOV-09 Comment1   05-NOV-09
  Veera           11-NOV-09 13-NOV-09 Comment2   11-NOV-09
  Veera           11-NOV-09 13-NOV-09 Comment2   12-NOV-09
  Veera           11-NOV-09 13-NOV-09 Comment2   13-NOV-09
  

  Charles Hooper
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• Equium M40x does not work with connected AC

  Hi all

  I have a laptop Toshiba Satellite M40x-189, there little about 2 years and recently I have problems with it.

  The laptop when it is connected to the Board, the green light appears, but after 5 seconds it laptop turn off. the looks of dead battery, because it does not load normally, I keep connect and disconnect the AC, so that the orange light appear sometimes, sometimes for 5 seconds only. It's frustrating. When the drums come to start getting free he takes forever to be full. just at the moment where there is a load on the battery, that I can work on the laptop, even with the connected AC, but instead to use the AC laptop running on the battery, which usually lasts less than an hour, and then it's the bit of history.

  All I need is just to work with connected AC, because I normally just use the AC.
  Well I don't know what the problem is, can someone help me please

  Hello

  For me, it looks like a problem with the electronic power supply on the motherboard.
  I don t think that there is an adapter of wit AC problem itself or with the bad connection between the power supply and the Commission.
  If the AC adapter would malfunction the battery would not charge. But charges of battery, it collects a very slowly but it charges

  Finally I n t think you can do something you go to the service of your country. In such cases you re on the right side

• with the clause against table inline

  Dear Experts,

  With clause or inline table are identical from the point of view of performance.

  What query is better?

  query with clause

  with table_getbuckets as
  (
  SELECT * FROM TABLE(pack_activitymonitoring.f_getmatbuckets (start_settle_date,end_settle_date))
  )
  SELECT
        nvl(baludhar.pct,0) AS pctudhar
  FROM t_option opt
  LEFT OUTER JOIN table_getbuckets balinv ON
              opt.a_id = balinv.collateral_a_id AND
              opt.s_id = balinv.s_id
  WHERE opt.for_principal=1
  
  

  query without a clause

  SELECT
        nvl(baludhar.pct,0) AS pctudhar
  FROM t_option opt
  LEFT OUTER JOIN (
                   TABLE(pack_activitymonitoring.f_getmatbuckets
                                                      (start_settle_date,end_settle_date))
    ) balinv ON
              opt.a_id = balinv.collateral_a_id AND
              opt.s_id = balinv.s_id
  WHERE opt.for_principal=1
  
  

  In this case, since you are using only the view inline once, I expect to exercise the same.

  For purposes of readability, I prefer the one that uses the WITH clause.

• Querry with connection by

  Hi all, I have a few question

  with tab (c1, c2, c_from, c_to) as)

  Select 'donnees_1', 'data_2", 1, 3 of all the double union

  Select the option 'data1_1', 'data1_2', 1, 2 all the double union

  Select 'data2_1', 'data2_2', 1, 4 double

  )

  Select * from tab;

  This query present a simple fact

  C1 C2 C_FROM C_TO

  ------- ------- ---------- ----------

  donnees_1 1 3 data_2

  data1_1 data1_2 1 2

  1 4 data2_2 data2_1

  Data I expect is:

  c1	c2	c3
  donnees_1	data_2	1
  donnees_1	data_2	2
  donnees_1	data_2	3
  data1_1	data1_2	1
  data1_1	data1_2	2
  data2_1	data2_2	1
  data2_1	data2_2	2
  data2_1	data2_2	3
  data2_1	data22_2	4

  I know I have to use connect by, but don't know how

  Hello

  In fact, you need not CONNECT BY for this problem or any other problem.  Nothing you can do with CONNECT BY you can also do it with a WITH recursive clause.  CONNECTION is much simpler for some problems, but not for this one.

  Depending on your needs, here's a way:

  WITH r (c1, c2, c_from, c_to, c3) AS

  (

  SELECT c1, c2, c_from, c_to

  1 c3

  TAB

  UNION ALL

  SELECT c1, c2, c_from, c_to

  c3 + 1 AS c3

  R

  WHERE c3< c_to="" +="" 1="" -="">

  )

  SELECT c1, c2, c3

  R

  ORDER BY c1, c2, c3

  ;

  Output:

  C1 C2 C3

  ------- ------- ----------

  data1_1 data1_2 1

  data1_1 data1_2 2

  data2_1 data2_2 1

  data2_1 data2_2 2

  data2_1 data2_2 3

  data2_1 data2_2 4

  data_2 donnees_1 1

  data_2 donnees_1 2

  donnees_1 data_2 3

• Bad Audio quality of Blue Snowball with Connect

  I am using a microphone snowball blue with Connect, with sound quality terrible. With other software (for example, Camtasia) quality sound is big, so the microphone is OK.

  My suspicion is a mismatch of sampling, as Snowball uses a parameter fixed 16-bit/44.1 kHz. Can I set this up in connect?

  Stefan BR

  Found the solution. In the preferences, the option "use audio improved" (or similar - I use the German version, this is it: Voreinstellungen > Mikrophone > "use Verbessertes Audio") must be disabled.

• How we would use the apps with connecting them to creative cloud and it is not not a trial.

  How we would use the apps with connecting them to creative cloud and it is not not a trial.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Mylenium

• Is there a problem with ValueChangeListener and af: table?

  Hello...
  
  I use JDeveloper 11.1.2.0.0
  
  Is there a problem with ValueChangeListener and af: table.
  
  Here my problem...
  
  I have two inputtext in af:table and I want to change the value of inputtext2 when I change the value of inputtext1
  so I put the autosubmit = "true" to inputtext1 and set the valuechangelistener method that is in the page bean
  and I put the partial inputtext2 trigger = "inputtext1 id".
  
  but when I run the page and change the value of inputtext1 that nothing happens.
  
  But if I have the previous scenario in af:panelFormLayout instead of af: table its work and the value of inputtext2 is changed to the user.
  
  any ideas...
  
  Thans.

  Sorry for the delay... :(

  And why if I use page JSF is the binding property disappears
  in the tab advanced in the property inspector.

  If you cannot power discovered the binding property in the palette of the means, your jsff page is automatically linked.
  If only the problem.

  try to create the new page jsff, while creating jsff, finally there is radio box something like
  do not expose the UI components automatically. check and create.

  and create a java file. Then you can bind components with the java file as you wish.

  to check your jsff page is autobinded are no means?
  Open your jsff page.

  Menu's that are on it - in this section. You can see the design menu that struck. If you hit it means you see Wizard property page go to the tab component binding
  There is a check box available

  If the box is ticked means that you page are automatically linked. If this isn't the case, you must link.

  -edited lately.

• date max with multiple joins of tables

  Looking for expert advice on the use of max (date) with multiple joins of tables. Several people have tried (and failed) - HELP Please!
  
  The goal is to retrieve the most current joined line of NBRJOBS_EFFECTIVE_DATE for each unique NBRJOBS_PIDM. There are several lines by PIDM with various EFFECTIVE_DATEs. The following SQL returns about 1/3 of the files and there are also some multiples.
  
  The keys are PIDM, POSN and suff
  
  Select NBRJOBS. NBRJOBS.*,
  NBRBJOB. NBRBJOB.*
  of POSNCTL. Inner join of NBRBJOB NBRBJOB POSNCTL. NBRJOBS NBRJOBS on (NBRBJOB. NBRBJOB_PIDM = NBRJOBS. NBRJOBS_PIDM) and (NBRBJOB. NBRBJOB_POSN = NBRJOBS. NBRJOBS_POSN) and (NBRBJOB. NBRBJOB_SUFF = NBRJOBS. NBRJOBS_SUFF)
  where NBRJOBS. NBRJOBS_SUFF <>'LS '.
  and NBRBJOB. NBRBJOB_CONTRACT_TYPE = 'P '.
  and NBRJOBS. NBRJOBS_EFFECTIVE_DATE =
  (select Max (NBRJOBS1. NBRJOBS_EFFECTIVE_DATE) as 'EffectDate '.
  of POSNCTL. NBRJOBS NBRJOBS1
  where NBRJOBS1. NBRJOBS_PIDM = NBRJOBS. NBRJOBS_PIDM
  and NBRJOBS1. NBRJOBS_POSN = NBRJOBS. NBRJOBS_POSN
  and NBRJOBS1. NBRJOBS_SUFF = NBRJOBS. NBRJOBS_SUFF
  and NBRJOBS1. NBRJOBS_SUFF <>'LS '.
  and NBRJOBS1. NBRJOBS_EFFECTIVE_DATE < = to_date('2011/11/15','yy/mm/dd'))
  order of NBRJOBS. NBRJOBS_PIDM

  Welcome to the forum!

  We don't know what you are trying to do.
  You want all of the columns in the rows where NBRJOBS_EFFECTIVE_DATE is the date limit before a given date (November 15, 2011 in this example) for all rows in the result set with this NBRJOBS_PIDM? If so, here is one way:

  with         GOT_R_NUM     as
  (
       select       NBRJOBS.NBRJOBS.*,
              NBRBJOB.NBRBJOB.*     -- You may have to give aliases, so that every column has a unique name
       ,       rank () over ( partition by  NBRJOBS.NBRJOBS_PIDM
                                 order by      NBRJOBS.NBRJOBS_EFFECTIVE_DATE     desc
                        )             as R_NUM
       from          POSNCTL.NBRBJOB NBRBJOB
       inner join      POSNCTL.NBRJOBS NBRJOBS       on    (NBRBJOB.NBRBJOB_PIDM = NBRJOBS.NBRJOBS_PIDM)
                                          and      (NBRBJOB.NBRBJOB_POSN = NBRJOBS.NBRJOBS_POSN)
                                    and      (NBRBJOB.NBRBJOB_SUFF = NBRJOBS.NBRJOBS_SUFF)
       where       NBRJOBS.NBRJOBS_SUFF             != 'LS'       -- Is this what you meant?
       and        NBRBJOB.NBRBJOB_CONTRACT_TYPE   ='P'
       and       NBRJOBS.NBRJOBS_EFFECTIVE_DATE  <= to_date ('2011/11/15', 'yyyy/mm/dd')
  )
  select       *     -- Or list all columns except R_NUM
  from       GOT_R_NUM
  where       R_NUM          = 1
  order by  NBRJOBS_PIDM
  ;
  

  Normally this site does not display the <>inequality operator; He thinks it's some kind of beacon.
  Whenever you post on this site, use the other inequality operator (equivalent), *! = *.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) for all the tables involved and the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.
  You will get better results faster if you always include this information whenever you have a problem.

• Unique problem with selction on the table (Query Page)

  Unique problem with selction on the table (Query Page)
  
  I have a VO data Bulletin Board, with a transitional attribute for selction unique column.
  My requirement is that I need to identify the line that was selected in the table.
  
  I associated with fireAction singleSelection column, such that whenever the user selects the line
  I'm looking for that VO using some rowIterator.
  But when running the loop of the transient VO that is mapped to the singleSelection variable is the show as "n" / NUll
  for all the lines...
  
  So how do you identify the selected line in singleSelection to a table.
  
  -Sasi

  In the property inspector of the element for which you've put firePartialAction, you can find a property named "parameters". That mention primary key as your setting.

  You can get the arameter using pageContext.getparameter ();

  -Anand