DW creates files that include-1, -2, -3, in file name?

Similar Questions

• How to create a new power plan that includes key backlit stop?

  I can't find any setting in the advanced power properties dialog box. Toshiba has provided a power eco plan. It's OK for me except the pilot. So I tried to create a power plan as eco with night light 1 hour not 5 minutes.
  However, this plan does not backlight key off.

  How can I create a new power plan that includes key backlit stop?

  Have you tried to change the power management Windows including power advanced for certain power plan options?
  For example, you can use balanced plan or standby power, change it and that s it.

• Can I create a task that includes the 2 c series modules?

  I am trying to create a single task that includes 2 modules of the series C OR - 9425, but when I wire the constant "Mod3/port0, Mod4/port0" physical channel in the DAQmx create Virtual Channel.vi I get error-200086 which indicates the syntax range physical channel in the input string is not valid because several devices have been included in the chain.  It is my understanding of LabView help this multidevice tasks are allowed.  Also according to article KB http://digital.ni.com/public.nsf/allkb/CF85114C6025C84C862571C000722DDA devices multiple tasks are supported for devices of the series S, series C and DSA devices, and according to this article KB http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument I formatted my constant of physical channel correctly.

  Please can someone explain why I get this error when all indications are that this should be a simple thing to do?

  My C Series modules are in slots 3 and 4 in a chassis cDAQ-9188, I'm currently under LabView 8.5.1, with Windows XP

  Thank you

  Eric

  Hi Eric,.

  I am afraid that you cannot configure the hardware timing with the module 9425 in CompactDAQ. The NI 9425 data sheet explains: «the NI 9425 is a static digital module, so you can use it to perform only call by the software or static operations when installed in a chassis NI CompactDAQ.»

  For I, AO and countertops, daisy chaining multiple calls to DAQmx create channel equivalent to specifying a list of physical channels, but it's different for DIO. Only one virtual channel DIO can contain several physical channels (lines). It would be quite reasonable to assume that by specifying a list of lines 'with a single channel for all lines"would cause DAQmx put all the lines in a single virtual channel, but see how it is implemented under DAQmx, is not possible when the lines are on multiple devices. Also, it would be reasonable to assume that if DAQmx could not put all the lines in a single virtual channel, it would create a virtual ring road, but that is not how it is implemented-, it returns the error you received.

  Instead, here are two approaches to all 64 lines in a single task. Either we have to work.

  Approach: create a single task, containing two virtual channels (MyChan0 and MyChan1). MyChan0 contains cDAQ1Mod3/port0 / line0:31 and MyChan1 contains cDAQ1Mod4/port0 / line0:31. Digital 2D Bool NChan 1Samp read VI returns a 2 x 32 table of Boolean. To flatten it into an array of 64 elements D 1, you must use the table to reshape or some other method.

  

  The task of DAQmx > ownership of channels is here to show that there are two virtual channels named MyChan0 and MyChan1. Also, I used a loop for to show that you don't have to encode multiple calls to DAQmx Create Channel. The constant "a channel for all lines" is redundant because it is the default value.

  B approach: create a single task, containing 64 virtual channels (MyChan0 through MyChan63). This example uses the constant 'a channel for each line', which is not the default. MyChan0 contains port0/cDAQ1Mod3/$line0, MyChan1 contains cDAQ1Mod3/port0/line1, etc.. Digital 1 d 1Samp Bool NChan read VI returns an array of 64 D 1 of Boolean elements. If you have used the Digital 2D Bool NChan 1Samp VI instead, you would get a 64 x 1 matrix, there are 64 virtual channels with 1 line of each.

  

  Brad

• Cannot copy file names that include the slashes, commas, etc.

  Hello.

  I am trying to copy files from my old Mac G5 tower (about 10 years).  But my copy fails with an error message when trying to copy a file name that includes a special character.  Is there a way to get around this?

  To clarify: when it runs in a file with special characters, it gives me the error message that the file name is too long or contains special characters.  The problem is that when I click 'OK' to confirm the error (not), the copy is aborted.

  Any ideas?

  Thank you!

  E. -.

  Oh!  Well I guess you will have to wait for someone with a Mac experience for you then help.  I do not have one.  I'm sorry.

  BTW, you should post your question on Apple/Mac forum.  Many experienced people who can help you.   Good luck.  :-)

• Can I create an action that includes a shortcut for the patch tool?

  I am trying to create an action that includes a shortcut for the tool room.  I changed the patch (now R) tool shortcut to be different from the correct place (J), it works fine on the keyboard, but it will not record in action. Is there a way to include this point in the action?

  Something do not have in stock, and there is no menu item for the function you want to save.  The easiest way around your problem is to create a tool preset for the tool part then record by selecting this predefined in your action patch toll to pass to the tool room.

  

• How will I know when a PDF doc was created originally that there is nothing under file/properties

  How will I know when a PDF doc was created originally that there is nothing under file/properties

  Hi David,

  Generally, it appears in the document properties window in Acrobat (as illustrated in the following snapshot).

  However, if the sender/author has deleted the pdf metadata then there are chances that original file creation date is not displayed.

  

  Kind regards
  Rahul

• How I save action to save as that does not include a file name?

  HI -.

  I have an Action that will be cropping and scaling a PDF file then save it as a JPG in a destination folder.  The problem is that when I recorded the Action I did with a file named ABC. PDF and saved as ABC. JPG - and now all files saved with this

  Action is called ABC. JPG

  It is therefore impossible to use with a bunch of different files.  A file gets overwritten several times with the same name.  The ABC's of file name. JPG is 'burned' in Action.

  -How to record an action to save money without including a file name?

  Your help on this crazy problem TIA-

  Josh

  CS5 on Windows7

  Have you looked at file > Scripts > Image Processor?

  This could be all you need to batch convert a folder of files to JPEG.

  Nancy O.

• Windows 7 can search for files containing a specific string that includes punctuation

  I have a documentation for a programming language which is in the form of html on my machine and search for files that contain the string "${1}".

  However if I type that in the search box windows instead seeks any file containing the string '1' in its content or its file name or a folder (which gives me 10240 results!)

  Research I try it is possible with a different syntax (escape the $ and brackets to indicate that they are part of the search maybe string)?

  Thank you

  MOG

  Hi Mog,

  Because the question you posted is related to search for files containing a specific string, it would be better suited in the MSDN forum. Please post your question in the following MSDN forum:

  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/threads

• How can I generate a data merge that includes a barcode in excel spreadsheet for InDesign?

  Can you please indicate whether the following process is possible in InDesign CS 5.5? (Mac OS 10.8.2).

  We need to create a data merge that includes a barcode. The fusion of data concerns several thousand records.

  We have a customer supplied Excel spreadsheet that contains seven fields, which is a number which ultimately must print a barcode when we do the data to merge in InDesign.

  As you expected, the classic six data fields merge perfectly - but we can't find a way to make the code barcode printed properly within the data merge.

  We looked at several possible solutions without success.

  Some of the solutions suggest a plug-in for Excel convert the number to a code bar while still in the spreadsheet - but this does not come across properly when import us the CSV file in the InDesign data merge.

  We studied some third party software applications, but neither gives the complete solution that we need. Some, for example, seem to create the bar code in the Excel worksheet but do not produce the barcode correctly when us data merge in InDesign; and some we will create a unique bar code in InDesign, but have no automated way to recover thousands of numbers in Excel and turn them into bar codes.

  We have you met also possible solutions "police" but have had no success with these either.

  Previous employment, only to produce us entrusted to a specialist mailing company, who assured us that they have produced all the work (very quickly) in InDesign. They, understandably, don't tell us how they did it. But, given the speed with which they have produced work for us, we imagine - with the correct software - the whole process is easy to do.

  Can you please specify?

  See second adhow to generate a data merge in InDesign from an excel worksheet that contains a bar code

• Is there a way to drop an image in indesign and then have captioned under that file name?

  Hello! I'm looking to help a colleague in a rationalization process. We display the full page of images in an Indesign Document, and every time we drop and image on a page, then we change the caption under the file name. I was wondering if there is a way to automate this process? All the scripts available?

  When you place an image you can activate the capture feature. There are the normal and live versions. The normal label creates a text is text, the live version creates a variable that would change if the image or the text of the meta-information changes, but it behaves as a single character which causes problems how the text will run in the text block.

  What is drawn on the Meta must be set up before in the legend, in place option.

  When you drag and drop an image from the finder or bridge you can not enable this option.

  BTW I use another way that seems faster. I assign a shortcut to the command of labelling and when I imported the image, I click on this shortcut, and secondly, I apply an object style that formats the text block including the paragraph style which can be different on a dark or light picture or a graphic.

  Normally, I edit all meta-information in Adobe Bridge, which is the fastest way to cope.

• Flash site that includes a flash drive

  We received a flash site in a record that includes a drive on the inside as well as a .exe. (included in a picture in this post - these are called 'start' and 'start.exe').

  We wonder how we can do the same with a website flash, we have designed so that the customer can receive a DVD or CD-Rom (or the directory itself) and open it from there because it includes the drive inside.

  
  Our question is - how is this done?

  Thank you

  P.S. by the way - what's the .exe for? (we use Mac only - it will be used instead of "start" when you use a PC)?

  

  I don't know much about Macs except that I believe a .exe is the equivalent of PC to a .app of Mac as you thought.

  I don't know what you call a player, but I don't see one with the exception of a javascript file named checkPlayer.js (would most likely be used for the html page).

  What I imagine is that the start file is the main file you are using, and he calls in various .swf files that appear to be a site with various sections.

  Exe/app files could be considered in the drive of files as each is a file autonomous, able to play on a computer without the need of Flash player.  So if you have created a site you may have the boot file of the vehicle to see to whom you have sent all of the files.

  So for OTN do you the same thing, you take any fla file you used the main file of your site and in the publication settings configured to publish a projector to win and a Mac projector of this file.

• Training video that includes slides PPT and demonstration: what works?

  Hi all.

  I am using Presenter 7 (version 7.0.0) and try to make a series of training sessions for a software product. Each session will be a stand-alone flash or video file.  Each session includes the two slides with comments and reported of the manifestations of the screen.

  I tried to create these sessions by integrating videos created by Adobe Captivate Flash (they show the manifestations of the screen) in a presenter file which is then itself released as Flash, but I am running problems along the way. I can usually get the Presenter file to run from Powerpoint, but I often lose the sound in the video (except, curiously, for mouse click sounds - they survive). If I publish the Presenter as a Flash file, the embedded Flash video (the demonstration of the software) is completely eliminated.

  The trainer that will record the sessions wants to be manipulated in presenter as much as possible, because of the script window that allows to present (it displays the Notes area of the PowerPoint presentation, which is where the text of the narrative has been typed). But I'm willing to adopt other tools if the presenter will not work.

  So my questions are the following:

  Presenter will work for this project. and if so, what is the best procedure to follow?

  A newer version of the presenter would help?

  If you've done the training videos or Flash files that include Powerpoint slides and demonstrations of software screen, what tools have worked for you?

  I am grateful for what direction you can provide.

  -George

  I am writing to report the resolution to my problem.

  I first had an upgrade of the presenter (to 7.0.7) and a Captivate update (to 5.5) but never make them work together well without problems in the audio narration.

  I decided to try the "Captivate" approach only, and works well.

  My procedure is now to record the demo sessions in Captivate (without narration), import the slides required (without narration) and only then record narration and insert subtitles encoded in Captivate. If you're having audio problems when you use the presenter, with a narrative, as a container for Captivate video, I suggest you try my procedure instead.

  --G

• DW error? Links created in CS4 to put a slash before the name of file in html.

  To create a link I select the text and then choose make link to a html file that is at the same level. When I go to the code, the link has been established, but the new link has a slash in front of him.

  For example: < a href = "/ test.html" > link < /a > test

  I have received no support from the company on this issue.  I repeated the process a variety of ways and always DW puts a slash in front of the file name.  So, I have to go and delete the forward slash.

  Shouldn't they be fixing this problem? Or does anyone know of a fix?

  
  

  From what I understand of your screenshots, Dreamweaver inserts your links properly.

  A slash at the front of a link means the site root.

  searches for a file named test.html in the level of the root of the site. If this file does not exist at the root level, then the link is broken.

  If the test.html file is one folder down then, if the / is included at the front of a link, the link will not work unless the name of the folder is included in the link

  If, as you say, the file that you want to link is in the same folder, then you need a parent to the Document link.

  Thus, in the dialog box select the file specified in SelectFileatSameLevel.jpg, change Relative to the Root of the Site to read Relative to the Document.

  Your link will be inserted in the

  Your link does now work locally and remotely?

  Otherwise, files related, who are at the same level, in the same directory or in different directories?

• Create the Project File Name Prefix makes space after prefix

  I am creating a project template.  I noticed that when I put in the file name prefix it prefixes all my screws with this value MORE space.  I like the prefix but do not want the space.  Does anyone know how to make sure that when it renames all the screws it does not insert space after the preifix?

  See attachment.

  Thanks for any direction on it.

  Add the following in your LabVIEW INI file token:

  NewProjectNoAddedSpaceOnPrefix = TRUE

  This will prevent the dialog box create a project to add the namespace for the prefix.

• Is it not possible to get (or use) a search string that includes a reference object?

  Hello world

  I try to get the full search string property for the property "xl" seen below at the bottom of the image.

  I can go as far as the other results [0] (which is a reference), but after that, it seems not possible to access the "xl".

  "TS. SequenceCall.ResultList [0]. TS. SequenceCall.ResultList [0]. TS. SequenceCall.ResultList [0]. "AdditionalResults [0].

  If I get the interface for the object of 'xl' and then ask 'place' in what concerns the "MainSequenceResults", I get an empty string.

  Get the property for container objects and properties in the object "xl" also give the same result when I call «GetLocation (...)» with the MasterSequenceResults the TopObject property.

  Is it not possible to have a search string that includes a reference object?

  Thank you

  Ronnie

  

  Hi Ronnie,.

  It is possible, but to get this value, you can use the TestStand API. I have attached a sequence file that shows how to get the values of reference of object using AsPropertyObject, and then the associated GetVal method. It is much easier to understand with an example. Let me know if you have any questions about the sample file of sequence.