DW CS3 file insertion/update: Registration Wizard error

Similar Questions

• How can I fix "diagcab" file Ext. my register 0 Error 80070002 x? I can't update Vista.

  How can I fix "diagcab" file Ext. my register 0 Error 80070002 x?  I can't update Vista.  It seems I have to redo a diagnostic firm or something.

  Thanks, Greg

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK runs the next time he started - press Y and restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the CBS.log file created on your desktop (you can not manipulate directly) can compress the copy and transfer it to your SkyDrive (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• Unable to insert/update any registration via Oracle Forms 6i

  
  Hello

  I have a database block no (forms 6i) where I insert and update the application. Query is fired successfully, but it is not a document inserted or updated.
  Grant the user to insert/update.
  Commit is applied after each DML.

  I'm very surprised, why no data is not inserted into the database. Can anyone any suspicion that I might be missing?

  Other forms work well. All DML operations are working well in other forms, I get the error in a single form.

  There were a few exceptions at the level of the form. Then, form VALIDATION level did not work to validate the transaction DB, when I handled the exception, the validation of form level also worked to validate the DB transaction. Thanks to all for the helpful message.

• I'm trying to burn a (iso file), but keep a "transcoding error".  I downloand and install the latest updates.  Can anyone help?

  I'm trying to burn a (iso file), but keep a "transcoding error".  I downloand and install the latest updates.  Can anyone help?

  Hi Slim,

  First of all thank you very much for your help.

  I now sort the problem using the AVCHD tab.  I can't that assume that because the original video is of high quality in the program would not burn an iso file to DVD to address normal.  I also had to change the setting from 'Type' to "ISO Image (8.5 GB)" because it would not 4.7 GB.

  Kind regards

  Dave

• Hello, impossible to update my applications, error U44M1I210, impossible to extract the files to download, what should I do?

  Hello, impossible to update my applications, error U44M1I210, impossible to extract the files to download, what should I do?

  Hello

  Please see error U44M1I210 | Install updates

  Hope that helps!

  Kind regards

  Sheena

• I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

  I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

  uninstall any version of acrobat is installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer.

  delete all to delete pdf files.

  If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

• Difficulty of insertion/update file Path

  I'm trying to insert a text file path that I can then turn into a hyperlink into a VARCHAR field. This takes place on an intranet site, and I need the path to full physical access within the network (not only on the server). I don't want to download the file to a folder on the server.
  
  IE: \\Mainserver\intranet\Referencefiles\Quote.xls
  or
  \\SomeoneelsesPC\temp\test.doc
  
  I put in a section of the input file
  < name of entry = "FILEREF" type = 'file' id = "FILEREF" size = "70" >
  
  and define the behavior of entry must include the value in text form.
  GetSQLValueString ($HTTP_POST_VARS ["'FILEREF"], "text"));
  
  When I go to update or insertion, apparently not enter any value. This is part of an insert/updated statement more up-to-date and all survival equipment seems to work very well but this part does not work.
  
  What I am doing wrong?

  RichardODreamweaver wrote:
  > What I hoped was a button 'Browse' (similar to a download format), but
  > that only stores the path in the field.
  >
  > Is it possible to do without the download feature?

  You can't do that with a browse button, but you can create a function to
  query the file system and display a drop-down list of available files. I have
  show how it's done in "Foundation PHP for Dreamweaver 8" and "PHP".
  Solutions '. If you want to restore your own, get file system functions
  in the manual online PHP.

  --
  Adobe Community Expert David Powers
  Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• Windows could not search for new updates. 8007007E error (unknown error)

  Friday, 3/4, I did a windows update and downloaded and applied Windows Live Essentials.  When it restarted, my computer crashed.  Somehow, I was able to come back to life, but Windows Live Messenger has stopped working (did not connect).  I uninstalled and reinstalled several times, clean cache contacts, use the Windows Installer Cleanup tool and everything I could find.

  In addition to this, when I go to Windows Update now it states: not Windows is able to check for new updates.  8007007E error (unknown error)

  Also, I noticed that I have a few updates installed in the history of the update, but when I click on "installed updates" to try to remove them, they are not in this list.  They are:
  -Office Live add in
  -Windows Live Essentials
  -Windows Powershell 1.0

  Hi bennyeos

  Thanks for posting your questions to answers.microsoft.com

  Keeping in line with what said Sohail Patel, the functions for the 831429 KB are for XP and older versions, but which must take place for your question are measures which would be beneficial for this update.

  Here is a link to SFC/scannow Vista procedure, please follow and understand any corrupt file errors found and paste this information into the post on the forum.

  http://support.Microsoft.com/kb/929833

  If this corrects any file corruption, try again the updates.  If it's not here is a link to a forum that describes the registration of the dll.

  Please follow the instructions to register the dll in a batch file and then try the updates.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f02efc4b-7D6A-48df-8d85-5f6a36de6161/

  Let us know if you have any questions or if you need further assistance for the purpose this.

  Best regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Windows updates fails, get "Error 1327 Invalid Drive/M" error when trying to install updates by using the stand-alone packages.

  Original title: I deleted the files from automatic update and windows update keeps trying to install

  I've done an update for a long time on an old computer unused spare XP and Windows Update said that he had to update a large number of files, so I have left to download and install.  Once the 45 updates completed, I rebooted as instructed and proceeded to clean a lot of old data.  Apparently I deleted (7) files for Office M/S that must be installed, because the Winows Update icon in the status bar telling me I had 7 sto update to install.

  Now Win Update always tells me that the files should be updated and starts the process, telling me that they are already downloaded, but it fails every time because they are not where they should be, as I deleted them without meaning to.  How can I do the update for these startup files, or where can I get the appropriate files to allow the update work properly?

  Yes, I know it was stupid, but this is the frist time that I asked for help from Windows 3.1, so I don't feel too bad.

  I have download the individual Ko * .exe files support, but get an error 1327 Invalid drive / M error whenever I try to install one of them.

  Thank you

  Paul

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  Have you ever used registry cleaners?

  Notes in my old an assignment by Peter Foldes (long ago)-

  '0 x 80070643 error '.

  Use the following fix below. Please post back with results

  subkeys to rename 1 Office

  Note: Remove the following registry keys may reset customized user
  settings for your Microsoft Office programs.

  1. close all applications.
  2. click on start-> run, type regedit, and click OK.
  3. Locate and select the following registry subkeys:

  HKEY_CURRENT_USER\Software\Microsoft\Office\11.0
  HKEY_LOCAL_MACHINE\Software\Microsoft\Office\11.0

  4. right click on 11.0 and rename them in Old11.
  5. close the registry editor.

  2. detect and repair Office 2003

  1. on the Windows taskbar, click Start, point and click Control Panel.
  2. double-click on Add/Remove programs.
  3. click on change/remove programs in the left pane.
  4. Select Microsoft Office Professional Edition 2003 in the right pane, and then click on edit.
  5. Insert the correct CD version when she needs.
  6. Select "Reinstall and repair" and click Next.
  7. Select "detect and repair errors in my Office installation".
  8. click on install and wait for the process to end.

  3. install the updates
  --
  Peter '.

• Windows 8 Windows Update fails with error 80244FFF

  I have just upgraded to windows 8 and windows update now refuses to check updates, declaring that he "could not search for new updates" with an error code of 80244FFF.

  I tried:
  (a) perform the upgrade by following the steps in the wizard upgrade - no change of place.
  (b) to perform a clean installation from a USB - no change (this should work because this is a new installation on a clean drive with nothing else to interfere).
  (c) runs the troubleshooting tool (which simply stops / starts two services and pretended to have something fixed).
  (d) reatarting (Finally, that you never know)
  I'm a developer who has installed all the preview releases and can say that so far, the final version was the most unstable and frustrating - a new operating system should work out of the box, with the exception of some esoteric drivers.  All information online simply States that you must run the Troubleshooter or performing a clean restart - which does not solve anything.  I can update Windows defender through its own GUI so it may not be a connection to the update servers.
  Any help greatly received.

  Oddly enough, my problem has proved to be a bad hard drive. I ran Diagnostics on my entire system, nothing has been noted as a problem. I read a lot of posts on the web who spoke about problems of disk write, or the Windows Update database may be damaged.

  I decided to take a chance and replace my system disk and VOILA. Problem disappeared. I have to say that I lived also crashes and slowdowns with my system that also disappeared with the replacement of the drive.

  So even if the drive past all controls itself, something has definitely wrong with it. I was able to prove that by inserting it into a drive bay eSATA external and I immediately had problems doing anything with the drive. Disk Manager in particular. It would hang just reading. It was a 'Twilight Zone' problem I had not experienced before.

  I'm not saying that's the cue for everyone, but it was the solution for me.

  Kind regards
  Rob

• 10.1.15 update gives the error message 1301. But I do not have the original diskettes

  I have Acrobat Pro v. 10.1.14 for Mac. It will not install the last update, I get error 1301, who claims that the contents have been changed since the original installation. (I think it's wrong!). The help page tells me to reinstall Adobe with the original disks. Problem is that I don't have the original diskettes more. Bought this thing in 2012. Registered as a user. Is there a solution for this problem?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Database insert/update by PLSQL having problems

  I have a piece of code that applies metadata for a set of file IDs. There are several metadata elements and multiple files (in general). So, basically, it's a loop to apply all the metadata is entered in a single file and then a loop to do the same to all the other files.
  
  The changes stem from a table of application that will contain information that is entered before you send the page by the user.
  
  The ID of the file comes from a colon delimited string, using a distribution function. If the string has been implemented 2456:8476:4939 str (2) would be 8476 and str (3) would be 4939. Function PLSQL itself has no significant errors, such as when compiling it works out, but when running it (in this case I as a process of page in the APEX) nothing happens, and when run outside of the application, he says one line was inserted each time, and nothing is inserted/updated in the database.
  
  I looked online and saw people have had similar problems, so I think it might be something simple that I'm just not.
  
  Here is the code:
  

  declare
      updatecheck VARCHAR2(2000);  --This will be used to check if an update or an insert is needed
      str string_fnc.t_array;                 --Array for the file IDs
      v_apex VARCHAR(2000);            
      countloop NUMBER;
  
  begin
  str := string_fnc.split(:P53_FILE_ID_LIST,':');                         --Splits the file ID string into an array.
  SELECT COUNT(METADATA_ID) INTO countloop FROM DD_METADATA_MASTER; --Determines how many pieces of metadata are currently possible to have
  for i in 1 .. str.count loop --For each file in the array, loop.
  for j in 1..countloop loop --For each piece of metadata that can be altered, loop.
  begin
  --If the current metadata item did not have new data entered, do not do anything for it.
  v_apex := APEX_APPLICATION.G_F01(j);
  exception
  when NO_DATA_FOUND then
  v_apex := null;
  
  end;
  --If it did have something entered, figure out if update is needed or not.
  if v_apex IS NOT NULL then
  begin
  --APEX_APPLICATION.G_F02(j) contains the ID of the metadata item. It is used to determine the type of metadata that is being used.
  --METADATA_VALUE_ID is simply a unique key whereas the master ID identifies which type of metadata the row is.
  
  select METADATA_VALUE_ID into updatecheck from DD_METADATA_VALUES where FILE_ID = str(i) and METADATA_MASTER_ID = APEX_APPLICATION.G_F02(j);
  exception
  when NO_DATA_FOUND then
  updatecheck := null;
  end;
  --If there is currently nothing in the values table for the current metadata item for the current file, new data should be inserted.
  if updatecheck IS NULL then 
        INSERT INTO DD_METADATA_VALUES (METADATA_MASTER_ID,METADATA_VALUE_ID,VALUE,FILE_ID) VALUES (APEX_APPLICATION.G_F02(j),DD_METADATA_VALUES_SEQ.NEXTVAL,v_apex,str(i));
  --If there already is metadata for the current item in the current file, update that data.
  else
  EXECUTE IMMEDIATE 'UPDATE DD_METADATA_VALUES SET VALUE = :1 WHERE FILE_ID = :2 and METADATA_MASTER_ID = :3' using v_apex,str(i),APEX_APPLICATION.G_F02(j);
  end if;
  end if;
  
  end loop;
  end loop;
  
  end;

  Published by: MichaelPaul on April 10, 2012 05:57

  MichaelPaul wrote:
  I tried a POSTING earlier, but let me test it in several places, rather than the only point that I had earlier to make sure that is not the issue.

  I tried with both, directly after insertion, and directly after the "EXECUTE IMMEDIATE"...

  Had similar problems, and that worked for me...

  HtH
  Johan

• Component ODI OWB 11 GR 2 How to connect lines inserted/updated to update / delete

  Hi experts,
  I developed an ICT KM which will insert into a target table data line-by-line, I used the ICT_SQL_INCR_UPD_ROW_BY_ROW KM of base provided by oracle, what I noticed, is that this newspaper does not work lines that are inserted as other KMs, after that a little research on the internet discovered that ODI has a function for this , oidRef.setNbInsert, but this doesn't work in OWB KM, it gives this error:
  --------------
  Traceback (innermost last):
  "< String >" file, line 305, inside?
  AttributeError: setNbInsert
  [12: 02:05] Szabo Adorian: org.python.core.Py.AttributeError (Py.java)
  org.python.core.PyInstance.invoke (PyInstance.java)
  org. $0 Python.pycode._pyx64.f (< string >: 305)
  org. Python.pycode._pyx64.call_function (< string >)
  org.python.core.PyTableCode.call (PyTableCode.java)
  org.python.core.PyCode.call (PyCode.java)
  org.python.core.Py.runCode (Py.java)
  org.python.core.Py.exec (Py.java)
  --------------
  
  Dose - anyone have an ideea how can I connect the inserted, updated, deleted in interface OWB lines (we have a customer who would like tho have this feature)?
  
  Enjoy a quick response,
  CIPI

  Hi CIPI

  Unfortunately, it is not included, the only possible audit for lines is via JDBC and properties explanations in KM.

  So not every API of ODI is supported, a large common subset is available, you can see the doc for more details (these audit would be useful);
  http://download.Oracle.com/docs/CD/E11882_01/OWB.112/e10935/code_tempates.htm#CIHIIJDI

  See you soon
  David

• SQL query generated by insertion/update of data vi?

  Hello!

  I'm new to LabView, now rated as my company's management plans to buy licenses for several developers. I'm now playing with the database connectivity toolkit and try to insert/updated updated data sets. Everything is good with simple tables, but when I try to execute relatively complex queries are often mistakes LabView diagnosed everything as "syntax error in Update statement" or something like that with no specific details.

  Is it possible to read the actual SQL queries generated by these vi or is there a (preferably free) tool to monitor all SQL queries called by my LabView program?

  Here is the link I promised last night. It includes a review of the issues with the CSD and why it is not necessary. There is also a link with some drivers that allow you to do what you need to do and are free - and a brief tutorial on the access to databases.

  Mike...

• I use Win XP SP3. I'm unsuccsesfully installation of automatic updates. Have error message 0 X 80070645? __

  This problem had going me in circles. It lasts for more than a year.

  First run the difficulty in this article & see if the update will install after doing:

  How to fix MSI software update registration corruption issues
  http://support.Microsoft.com/kb/971187

  If no joy, see...

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  Then proceed with the following text:

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://msdn.Microsoft.com/en-us/KB/kb00318785.aspx

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After running the cleaning of .NET Framework (not the Windows Installer Cleanup utility) tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  =========================

  What to do if other .NET Framework configuration troubleshooting procedures do not help:
  http://blogs.msdn.com/astebner/archive/2008/03/07/8108332.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft