DW CS3 trial on Vista Ultimate, no pass

Similar Questions

• How to uninstall vista Ultimate edition trial

  I installed a trial version of vista ultimate on my laptop, please tell me how to uninstall it. And the trial ended

  Hello

  See if you have a windows.old folder.

  If you do, follow these instructions:

  "How to restore a computer to a previous Windows installation after you install Windows Vista"

  http://support.Microsoft.com/kb/933168

  If your system does not meet requirements for the above actions, do a clean reinstall of the previous operating system.

  See you soon.

• New PC Vista Ultimate ID CS3 and CS4-"enter" does not work

  I have a new laptop running Vista Ultimate.  I installed my CS3 Design Premium full version and in InDesign, have had problems with both past on the keyboard extended to give me a page break. I copy and paste a paragraph break or select from the insertion of special characters instead of type entry (not to mention the line break and a column which are also easily accessible break).  I actually never use page breaks, so it's extremely annoying.  Yesterday, I downloaded the 30 day demo of InDesign CS4 to see if it works better (willing to be upgraded if it fixes the problem). However, it also has the same issue - the two keys "enter" give a page break.  Obviously this is a bug that is overflowing with ID, but I don't have the problem in another application. Of course, I would like some advice as to how to track down where this issue develops and if there is a way I can fix it.

  Is numlock on?

• How to pass Windows 2000 pro for vista ultimate 64-bit?

  I have Windows 2000 Professional installed on a new computer. I'm running a motherboard geForce XFX 8200 with a 64-bit AMD phenom chip. I bought the upgrade to Vista Ultimate 64 bit at my college and when I try to install it I get an error "IRQL not less or equal ' also, I have a disk sata hard to 500gig 2000 pro recognized as a 130 concert. can anyone help?

  There is no upgrade path supported from Windows 2000 to Windows Vista - a "clean install" of Vista is necessary.

  Please see the bulletin:

  Choice of installation for versions of 64-bit of Windows Vista consumer
  http://support.Microsoft.com/kb/932795/

  Carey Frisch

• Upgrade Vista Ultimate 64 for Win8

  I have a Touchsmart tx2-1025dx running Vista 64 Ultimate.  I'll be able to upgrade to Windows 8?

  I ran the Advisor tool last night by Microsoft and apparently my laptop Touchsmart passes the test of upgrade.  The only difference is that I might have to reinstall all my programs/applications after installation.  However, he claims that my personal files will be migrated.

  It was run on a portable Touchsmart TX2-1025DX native running Vista Ultimate 64

• Need help to install Vista Ultimate x 64 SP1 - error 0x800F081F - standard corrections do not work

  I have trouble getting Service Pack 1 installed on Windows Vista x 64 final.

  Current issue: SP1 does not appear as an update, and I have not yet installed.  Windows Update tells me that I'm completely up to date.

  History (memory, may be some errors):

  • Performed the new installation, including Vista Ultimate x 64 disk erasure (MSDN)
  • Updated to current with windows update
  • Installed Office 2007 Ultimate (MSDN) (don't know where update what happened)
  • Active Windows (could be a problem doing this after you install updates?)
  • Installed CPU usage, network, gadgets sidebar discs counter meter
  • Installed Live Family Safety
  • Installed Chrome
  • Installed Google Apps
  • Google Pack antivirus installed
  • Installed Google Earth
  • Attempted a manual installation of SP1 - fails with the error 0x800F081F
  At the present time, I can't get a manual of installation of SP1 to work, and Windows Update tells me that I am up to date.  -> System control panel tells me I'm running Windows Vista Ultimate, but does not list all service packs.  He also confirmed that the x 64 edition is installed.
  Steps for debugging:
  • Installed the drivers for the sound card motherboard
  • A ran complete chkdsk on drive to repair bad sectors
  • Ran the system file checker - find corrupted files, but can't fix
  • Journal CBS does contain no [SF] cannot repair the entries
  • Installed continues to update the system tool - tool does eventually make a update facility - who settle whenever I run

  System Information Link: http://www.filedropper.com/systeminfo

  [1] this is a new installation, so nothing has been pre-installed.

  [2] the only antivirus that was installed is the one that is included in the google pack.  I took it...

  [3] SP1 does not appear as an update

  [4] I'm strongly considering just clean wiping and [do a clean install]

  A1. If Vista was preinstalled on the computer when you bought it and you use the OEM disks (or hidden restore partition) to reinstall Windows, any antivirus free trial which initially is preinstalled on the computer will be reinstalled, but not valid.

  A2. You have therefore no anti-virus application installed. I see.

  A3. There are several prerequisite updates that must be installed before SP1 will be offered. See...

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  A4. Since you do not have an antivirus application installed, it would be your best bet. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to fix 8024200d error code in vista ultimate sp1

  How to fix 8024200d error code in vista ultimate sp1

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates:
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista Ultimate SP1 to SP2 error: Code FF

  System: HP d5000t with 6 GB of memory; 408 GB of free space on the hard drive; w2408H 24 "monitor running Vista Ultimate SP1.

  I tried a dozen times more than 3 months of updating Vista Ultimate 64 bit SP1 to SP2, each time that the error below.  It's the only update I have been unable to do.

  I take the following steps:

  : Download the update

  : accept the license terms

  : a window "install Windows Vista Service Pack; "Save your work, close all open applications and then click on install ', what I do

  : a message, ' Self extraction Stub has stopped working: a problem caused blocking the program works correctly. "  Windows will close the program and notify you if a solution is available - close the program", which I do.

  Still, the following message appears:

  Some updates have not been installed.
  Failed: 1 update
  Error(*s) found:
  Code FF     Windows Update has encountered an unknown error.  Get help with this error
  1 result for "WindowsUpdate_000000FF" "WindowsUpdate_dt000"

  0x000000FF Error_EA_List_Inconsistent
  Extended attributes are not consistent, the installer has sufficient privileges to access this directory

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• No sound in Vista Ultimate SP2 WMC for DVD movies

  Hi all. Vista Ultimate SP2 x 32,

  I want to watch movies on my HP Pavilion zv6000 DVD. The WMC play the DVD very well, but there is no sound. The sound works well otherwise game and music DVD OK. It is only the film DVD with no sound. I installed the codec and decoder to try to see if they could help, but so far nothing.

  I also installed the VCL and programs Corel DVD Pro and they play very well, good sound, but it is a trial version which I do not want to buy, so I would like to be able to use the WMC that comes with Vista that I already paid for.

  are there utilities or what is known to solve this kind of problem with the WMC Vista? The films are the only types of DVDs that I have the problem of noise, and they are all good DVD, Disney, etc., purchased on amazon.com, so that they are good media.

  Suggestions or recommendations would be appreciated.

  Just one additional bit of information for others. Other people I have rad and conversed with who have had the same question said that they could play the DVD movie with sound after you install the original version of Vista and even the SP1 update. But, after installing the SP2 update the sound played more. So what people could do is to check this area of their sound before installing SP2 to see if these boxes are checked and if not, go there first and uncheck these boxes after installing SP2.  I didn't know before not the hand, I did look to see if they checked if I don't know whether or not they were not checked before.

  But, in any case, after I installed SP2, they may need to uncheck these boxes in order to have sound with DVD movie again.

• Taskeng error (Vista Ultimate). PC will not properly shutdown

  Hey Microsoft board gurus,

  (Running Vista Ultimate on a Dell Optiplex 330)

  SHUTDOWN PROBLEM, here is what happens:

  1. I use start menu & off the pc.
  2. PC seems to turn off (but a few small red lights twinkling near the power button / at the front of the Tower & the rest of button IT turned on.)
  3. After about 10 minutes, the PC then restarts by itself
  4. He can complain about "an unscheduled stop.
  5. Then
  6. I stopped again, and finally, it shuts

  Sometimes to get it off, I have to make a hold in the power button.  I know that regularly isn't good for the computer.

  At some point after the pc auto-entrée back, he sent this taskeng error, so maybe this is a hint on the cause of the problem.

  • I tried to do a restore from the registry to May 7 (a date the pc was ok), tried ending taskeng before stopping, and I let a Windows system/repair/recovery Volume and still have the problem.
  • Thinking maybe the computer was in the middle of the installation of Windows updates when I turn me off my PC at night, I have reviewed the updates of Windows 'Important' that were pending / CCEd would be / available, and they are useless for me (Office 2007 and IE) and should not have been install.
  • I tried a few other things, and the problem happens even about half time or more when I turned off the PC for the night.
  • I spoke to Microsoft; they don't help me without paying because my license code Vista is OEM, meaning that Dell is responsible for helping me.  Dell will not help me without paying because they say that it is a software problem and those who are not included in no charge technical support and was told to talk to Microsoft.

  Any advice to get my computer to close normally again?  It is very annoying because it takes TWO stops in about 10 min. OR a hold-in button stop making my PC actually turn off.  The text of the error below.  Thank you.

  Signature of the problem:
  Problem event name: BlueScreen ((registry of means files are corrupt MATERIAL ts rep sales; AFTER this error if I post in the community))
  OS version: 6.0.6002.2.2.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 9f
  BCP1: 00000003
  BCP2: 86DDA430
  BCP3: 86DE1348
  BCP4: 8460BE28
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini050910-02.dmp
  C:\Users\Kurt Kirton\AppData\Local\Temp\WER-40029-0.sysdata.xml
  C:\Users\Kurt Kirton\AppData\Local\Temp\WERCAAD.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  You said Details of the bugcheck 0x9f - DRIVER_POWER_STATE_FAILURE. "This bug check indicates that the driver is in an inconsistent or invalid power state." The problem is that "a device object has been blocking an IRP for too long."

  You can download the contents of the c:\windows\minidump on SkyDrive and provide a link?

  Consider the following general guidelines for dealing with bluescreens.

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

• Need to re - load Vista Ultimate

  My laptop computer was upgraded to Windows 7 trial and now I need to re - load Vista Ultimate. Is there a way without having to buy a disc?

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Hard install Vista Ultimate 6000, without priming, Acer note able 3100, cams with Media Center edition, 512, dvdrw, drivers, duplicates, blue screen, good config to privileges, I press down over details

  I was reading in this forum, an error is 0x800705b4 in Windows Defender disabled by operating with Security Essentials, it's that I use, is there any Virgin resource to stay with the (OEM) version, I bought this box without knowing, but defender in another installation works well, like SpyBot, they are functionally, easy and do not stop everytimes.
  for Vista, run, I agreeded plus 512, accompanied the classification 3.0 and running the Advisor, all ok, only updated drivers, which I did, visiting Acer Support for improves for Vista, good stay, now with ATI and ENE downloads, did not appear questions in Adm tools, I probed some wrong messages until today, 'HD has STOPPED "No. BOOT HAVE" DO NOT HAVE PERMITIONS' and other bad/uggly which replace answers to think if my OEM version is not good or not have all rights to fight in Net with spam, virus, threats, some pigs.
  I ran a few backups with DVD - RW 4, 7Gigas, but now stay accident, do not stop format in all cases, computer way or Windows BackUp, will be a bad sector in the dvd media, perhaps, I will probe the purchase of one more, it's RW, but in the apps that I have downstairs, one pass me "support dvd are not rewritable, possible! These days are for sale due to lack of economic market, clouds see consumer! Friend, it's time luch here, brasil, thanks much Bacharel em Ciencias Contabeis

  Hola Carlos!

  It seems that you have some problems. We may be able to get you run back soon.

  I think our best option is to do a system restore to a point in time before you start to get in trouble. I hope that you have a few options here.

  Click on START and type > system restore
  Click on next to the first screen. You should see a list of the dates of "restore". Choose one before you start to get into trouble and click Next. Follow the prompts to complete.

  As you acknowledged, you need more memory/RAM. 512 MB is not enough for Vista Ultimate to work well. You need at least 1024 MB... more if possible. You might consider getting RAM before anything else because it will considerably speed up your computer.

  Please let us know what happens.

  Mark <> Microsoft Partner

• Vista Ultimate?

  Hello

  I was wondering if anyone can point me in the direction to buy a new product key for Vista Ultimate?

  
  

  Hi Rob,

  Well the copy you have is not really 'new', it has been used before and installed on another computer, so you get the message 'key product already in use.'

  Your only option is to call the line Activation of Microsoft, start the activation procedure - is told in passing that this procedure is automated. If activation fails again "don ' t ' hung up, rather stay online and you will be transferred to a"real"person You can then explain that you purcahsed your copy of E - Bay and that the copy will activate not because the product key is already in use. The person you speak to should be able to offer advice or actually activate the software for you.

  See this link from my Web site for more details: http://www.winuser.co.uk/windows_vista_faq/87_product_key_already_in_use.html

  Before moving on to the software to another person you must clear the copy from your own computer to comply with the license agreement. It assumes that the person who sold you the re-allocated operation has already done in this case, I can't see a problem with the active product. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk; Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org;

• Upgrade to Windows Vista Ultimate Edition of Windows 7 Professional?

  Original title: Windows 7 Ultimate Upgrade

  I have a HP laptop that originally shipped with Windows Vista Edition Home Premium I did a clean install of Vista Ultimate with. I wonder if I've been upgrading to Windows 7 I can go with Windows 7 Professional? What is Ultimate? I am not wanting to use Windows 7 Home Premium, but I guess if I have no choice, then it is what it is.

  Thank you in advance for your help!

  I look after 150 Windows 7 client computers.  I can inspires you much insight that there is virtually no reason for a user of typical computer use anything more expensive than the publishing house.  Virtually all the differences are useful for system administrators and advanced users.

  That being said, you may have a lot of trouble FINDING any edition of Windows 7 other than professional, due to rules of Microsoft.  However, my advice to my clients is to buy the House if you can find and save your money.

  You first need to know if your Vista machine can support 64-bit.  It is possible, if you want to install.  Then add memory at least 4 gigabytes.

  Also, before everything that you can do that, strongly recommend that you evaluate the status of your hard drive.  Portable hard drives are usually the first thing to fail in a laptop.  You must determine if you need to replace the hard drive first.  In fact, it's what I would do.  You can test the EQUIPMENT of your drive by running a software tester training from the manufacturer of your hard drive.  If you pass along the model number of your player (Device Manager shows it), I'll answer with a link to this software.

  Other tips: do not use the UPGRADE option.  All operating system installations must be clean, or so-called Custom in the installation process.

• where can I download a free trial of windows7 Ultimate or professional?

  Hello
  I am a user of windows Vista. I want to upgrade to Windows7 Ultimate now. Before that, I want to try it once. Please help me with the link to download a free trial version Windows7 Ultimate.

  Thanks in advance...

  Hello
  I am a user of windows Vista. I want to upgrade to Windows7 Ultimate now. Before that, I want to try it once. Please help me with the link to download a free trial version Windows7 Ultimate.

  Thanks in advance...

  Hello

  The trial version only of Windows 7 currently available is the Windows 7 Enterprise 90-day trial.

  To learn more about the evaluation, please visit http://windowsteamblog.com/blogs/springboard/archive/2009/09/01/windows-7-enterprise-90-day-evaluation-now-available.aspx

  I hope this helps.

  Thank you for using Windows 7 Ronnie Vernon MVP