Dynabook CX2133CMSW wouldn't start!

Similar Questions

• Satellite C855 - 1QF PSCBYE wouldn't start upward

  I have Toshiba Satellite C855 - 1QF PSCBYE. Everything was fine, but today my laptop wouldn't start up. Screen stay black and NUMLOCK is turned on. Turn off after 36 ". What happened? What's wrong? I tried cold reset.

  Posted by kostis
  

  I have Toshiba Satellite C855 - 1QF PSCBYE. Everything was fine, but today my laptop wouldn't start up. Screen stay black and NUMLOCK is turned on. Turn off after 36 ". What happened? What's wrong? I tried cold reset.

  I have the same problem :-(

• When I installed Vista SP 1, Windows wouldn't start. Windows can function very well without any SP upgrades?

  Windows wouldn't start after a Vista SP 1 upgrade. I have successfully restored the pc to a point before SP1 was installed, and now Windows works fine. Vista may work ok without MS updates. If not, should I try to reinstall the MS any advice would be greatly appreciated. C

  You can view your web site of PC makers of the available driver updates.

  It would be unwise to run a PC connected to the internet has not been updated with the latest MS updates and

• My watch wouldn't start

  I stop my watch today. After a while, I tried to start it (the side button pressed), and nothing happened. I tried several times and still it would not start. Eventually, I pressed the digital Crown and side button at the same time and it started. What could have happened? It's never happened before.

  Hello

  Other users have also experienced this problem, without obvious reason.

  I suggest to let Apple know that you did also experience:

  https://www.Apple.com/feedback/watch.html

• Tecra A7 wouldn't start

  I'm just trying to start my computer.
  But when he is about to enter windows it stop and tries to start again. He keep doing this over and over again.

  There is a big problem: I can't lose the files on my computer.

  I hope someone can help me with this problem.

  A serious problem, it looks like you tried to start in safe mode? If this doesn´t can help then it would better to give your machine a local ASP.

  Welcome them

• Satellite A30 614 wouldn't start upward

  I have the following problem: when I start my laptop I get the following message:

  Problem reading disk c or:

  Intel UNDI, PXE - 2 intel corporation, 0 (build 082) copyright (c) 1997-2000

  For Realtex RTL 8139 (x) /8130/ 810xPCI controller Fast ethernet V2.13 (020326)

  PXE - E61: media test failure, check cable of

  PXE - M0F: existing PXE ROM

  By the first message, the laptop is still, and the second message repeated again and again.

  help please.

  Caesar

  First of all, you should check if the HARD drive has been recognized in the BIOS.
  To access the BIOS, you will need to click on the "F2" because this laptop seems to use Phoenix BIOS.
  Check the HARD drive was chosen first in the boot order.

  To test a HARD drive, you could also remove it and he could connect as an external USB for a second PC.

  But I see you n t have much experience with these procedures, and therefore, it would be advisable to ask a technician for assistance.

• Dynabook G9: Changed Toshiba start screen after trying to update BIOS

  Good day, everyone!

  It is not a problem, but I would like to know how it could happen so I a "Dynabook G9" laptop that was purchased from the Japan. It's like satellite 5200 series... When I turned it on, the logo "DYNABOOK" displayed and computer kept loading... a few days ago, I have tried to update the BIOS but downloaded the Russian from Toshiba Web site for 5200 series update... cause there is no BIOS update on the Japanese site...

  When I run the downloaded file, it says I have BIOS v 1.40 and it can not be updated v 1.50 because it isn't for my laptop... so my idea to use the update for European laptops did not work... but the question is that now I have "in touch with tomorrow Toshiba" logo instead of "DYNABOOK" and how it could happen? And how can I get it back?

  Computer still works fine... but... I do not know... I like just the "DYNABOOK" logo more :-)

  P.S. maybe it changed not after trying to update the BIOS (I'm not really sure) but it has certainly changed.

  I already wrote something in the other topic and because of that I just want to say hi again ;)

  Dear Andrey problem is that Toshiba does not portable as produced big world and there are several global areas: U.S. market area EMEA (Europe-Middle East-Africa) and also in Asia. I am not sure if the Japan is separately but I think it is.

  Also books produced in all areas are suitable for each other. Because of this, you cannot mix BIOS and Toshiba has designed tools and utilities. I think that in most cases, it can work, but it is not for sure. Support page for notebook EMEA, it is recommended to use the BIOS and other stuff explicitly of Toshiba Europe. For US books there are all the drivers, tools and utilities on the Toshiba U.S. support page.

  Now, you have Japanese laptop and use non - Japanese BIOS or software. For me, it makes sense that some changes will happen. I don't think anyone has good experiences with it, but you should be happy that your laptop works well.

  All that s what I can say about it.

  In any case, good luck and have fun with your toys!

• Re: Satellite A300-1MO wouldn't start

  Bought a new A300-1 MB a few months ago and did not have the restore DVD.

  I installed updates for vista. The laptop was not plugged and it came down to halfway.
  Then, I try to use the option 'repair your computer' to try recovery hard drive and nothing does... white screen...

  What should I do now?
  Is there a way I can recover my laptop without having to buy a recovery CD/DVD?

  The only way of recovering your laptop without the DVD is to start the HDD recovery procedure.
  As a first step, we need to know if you can start your laptop properly.

  Connect it to the power supply and run it.
  You can enter the BIOS settings?
  See Toshiba welcome screen?

• service pack for xp when I have downloaded my xp wouldn't start

  Windows won't start after service pack

  We should assume that this is Service Pack 3 you talk like you failed to mention what Service Pack and Service Pack 3 is the last of them.

  Have you read: steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  TaurArian [MVP] 2005-2010 - Update Services

• T61p wouldn't start and stuck to the blinking cursor

  A few days ago I was working. Suddenly, I got a blue screen. Unfortunately I did not read fully what it was that restarting always worked. When I first started, he was stuck just after logo Thinkadvantage. All I see is a slider blinkiing. So, I went put BIOS in place and ran HARD drive Diagnostics. He did not report an error. I reinstalled the hard drive. I still have the same problem. I don't have the recovery with me cd.

  What is a hard drive problem?

  It was a very good link. I tried everything I could. I don't have a restore CD. To get the recovery CD, I have to call. Lenovo support mentioned that I might be charged for the call. One more, I'll be charged for the restore CD. It would cost me about 50 buck. I threw in another $ 80 and buy windows 7 family pack updated my Dell XPS Gen 4 and T61p.

  Both went well. It's really worth. No worries so far I've had all the time in my desktop XPS Gen 4

• Pavilion Dv6 - startup with beep continuous and wouldn't start without the CD inside windows

  Hi, so I was using my laptop one day, perfectly fine and I got sick, so I had it turned off for about 2 or 3 days. When I turned it back on it started constantly beep (1 beep long, but 1 beep followed by another instantly.

  Now I tried to reinstall Windows 7 and did, but she continued with the same problem. So I did a format on my drive, and did install a clean windows 7, it completed the installation currently and reset to move to the next step (now it does not start back to the desktop to completely finish doesn't stop beeping and freezing)

  I did a hard reboot and that did not work and I cleaned my air, nothing has worked to resolve this issue, and I did nothing in 2 or 3 days, he was off (before that day, I played last, it was working fine, and the day I turned it off everything I've done has been playing World of Warcraft don't not download/install something again)

  I opened the back and checked my memory was sitting on the right, and my HARD drive was inplace correctly (at the beginning when it was happening, it would not be in the office without the Windows 7 CD inside, now after I did a clean install, he's not going to the office without worrying)

  I read another post with similar problems and plan to go out 1 of my RAM sticks and just try to run with 1 in, and switching them and try to see if that helps, but I'll do that tomorrow as I worked on this thing for hours tonight, I've been on the Windows 7 forum get advice from someone here, but he gave a link to read and agreed I should post here also.

  My suspisions that if none of this works, it's my Proccessor, my Ram or my entire CPU, which in this case, I know not what to do to do or if it is worth fixing (Ram is easy, but the other two seems difficult and costly) for any help or advice as I can get from you guys would be greatly appreciated it's a HP Pavilion dv6 notebook.

  Edit: I managed to enter the office and my clean install of windows 7 in full, and I made a default reset in the BIOS, will return tomorrow with updates I have.

  Yes mate, I waiting since I posted a reply with HP staff.

  They are * beep * ing pathetic and I would never buy a HP anything ever, I will also say to all my friends and tell all my friends to tell their friends and so on and so forth, do not to do. I will also let any forum I post on the same and any game online that I play on the same thing.

  I gave up and will just buy a new DESKTOP PC, they work better and you can actually solve the material problems if it's graphics/CPU things, unlike a laptop.

  If I were to ever get a laptop once again, it will not be a HP, I'd rather have nothing then use a pathetic HP product ever, I would rather die then have to use it. Their technical support is pathetic, and I had nothing else problems with the HP laptop I've had since the beginning.

  Because of their pathetic excuse for a computer/laptop, I am behind in my studies and have perhaps missed a few projects that I'm not able to repeat. Thank you HP, you are now under the dirt for me.

• Qosmio G40 wouldn't start when it's on battery

  Dear all,

  I've seen a few threads here with the same question. The solution has been proposed on this forum (actually a working one) back in a batteryout, and the G40 would boot normally...

  I called service and they suggested to leave a unit with them for X days. There is absolutely no promises about how X could be... «We cannot promiss anything either before the autopsy is done...» "

  * Someone found a solution better than taking the battery all the time? If anyone has been to a service with this question? This problem has been identified by people in service? *

  Post edited by: Franky-D

  Hi Sergey

  There is a solution;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28045

  and it seems very easy ;)

  The BIOS to set the option * WAKE-UP ON BATTERY = _ENABLED_ *.
  And save the changes to the BIOS.

  She!

• 2011 15 "Macbook pro more low ram slot machine does not work. 3 beeps every time I start up my Mac.

  Hey guys,.

  Then Ive met this weird problem with my mac. While I was using the Mac at work for like 4 hours without interruption and then when it was time to go home, I just put the screen down and put the Mac to sleep. When I opened the Mac at home, he started with 3 beeps and it wouldn't start.

  After having panic for like half an hour, so I decided to take google on this issue. I found many queries, but nothing like mine. So I opened the back panel of the Macbook, deleted the two Rams and re-sitting (like one of the posts on google said to do) twice but it still did not work. I took off the piston down and tried to turn on a single cylinder high and it worked.

  A bit of history, Apple had this quality control program where all 2011 Macbook pros affected by a defective video card can have their logic boards changed for free by taking it to apple. My macbook was one of them and apple genius guys changed the logic board. Long and behold, after six months the lower slot of Bank ram has stopped working. My question is, can I use the Apple since its only six months, and if I order a new Board of the logic on their part, what are the chances that this will not happen?

  Any past experiences you guys could share to help me would be greatly appreciated.

  Aqeel.J

  My question is, do I use with apple since its only been six months

  This is a user to user forum.  We are not employees of Apple.  Some users like you.  You will need to ask your question directly from the horses mouth.

  Call Apple Customer Relations - 1-800-275-2273.  Ask politely and firmly that you want to transfer to customer relationships.  Tell them exactly what you said in your post.  See what they can do for you!

  Good luck!

  If I order a new Board of the logic on their part, What are the chances that this will not happen?

  A good fortuneteller adventure can answer this one!  FWIW, I had mine replaced guarantee also that extended repair program had expired for FREE3 or 4 years ago.  My MBP 2008 is till going strong.

  

• I started the download of el capitan and did not have enough space for the upgrade - I released space, but now the upgrade is blocked for download

  I'm on 10.10.5 and try to upgrade to el capitan via the App Store.  I don't have enough space at the beginning and upgrade wouldn't start - I got error message says not enough disk space.  Once I released space, download hangs and will not end.  I have restarted the download several times and have rebooted as well.

  Hello

  Take a look in your Applications folder to install Mac OS X El Capitan.app. If you find move him to the trash, then empty/remove it. Another thing you could try is to go to Launchpad and look an article with the 'X' Mac OS X logo on it,

  Click and hold on it until it wiggles, and then click the little 'x' and then delete.

  Restart the Mac, relaunch the App Store and see if you can download now El Capitan.

  Another thing you can do, when the download is complete and what is important before you begin the installation process, do a copy to install Mac OS X El Capitan.app and keep them safe, to an external drive or USB key, the original in the Application folder item is deleted once the installation is complete. It is snack and practice have this spare copy so that you can install on other Macs if you want you will need to re - install the system should anything go wrong in the future.

  And always, always make a backup before making major changes to your system.

• MacBook Pro (retina, mid-2012) will not start

  I have the mac above and I have a weird problem. The mac wouldn't start, I could hear the fan running and if I pressed the power button I can hear her stop.  There is no visible display or no light. the shift lock lights.  Charger lights work normally, if I reset the SMC, the light on the charger goes from green to orange and green. I contacted Apple and they could not help, we have also reset the PRAM.

  I left it on and then when the battery was completely dead, I plugged in the charger and tried to turn it on, I was rewarded with the icon of the dead battery, progress! After a few minutes that he started ok, I had the Apple logo and progress bar and then start.  Alls well well except when he went to sleep, she would not start again until I have go through the flattening of routine battery.  I now have reboot, stopped, started from cold, sleep and he waken up - everything looks ok.

  My question is there will be any newspaper to show what was causing the machine does not go to sleep?  I lost confidence and am very reluctant to go to the genius bar as I don't think they understand the problem.

  Thanks for reading

  All saved entries are found using Console in your Utilities folder. Is simply a software problem, then you can erase the drive and install a new copy of Mac OS X. If it's a hardware problem you need an appointment with Apple Genius Bar for the service. If you need a Apple Store - find a store - Apple.