T61p wouldn't start and stuck to the blinking cursor

Similar Questions

• How does the index start and end in the reference Word text VI to a word document?

  How a correlation between the index values start and end to a position or coordinate in a Word document?

  Is it a type of lookup table that will refer to a value of say '35' (to start) to a line or a particular character of the position in a Word document? There is nothing in LV help which explains nothing other than the value '-1 '.

  Hey, JayB,.

  The start and end of the Text.vi in Format Word values are the positions of the characters in the document. The values start at 0 on the first (or ASCII character such as a space, tab, or carriage return) and for each character (or the ASCII character). So for example if I wanted to "BOLD" the word "carrots" in the list below, where the values start at 0 on the word 'grocery store '.

  Grocery store:

  Apples

  Black berries

  Carrots

  Detergent

  Then I would enter a start 33 and the end of the 40s, making sure to count the ramasseherbe returns and spaces.

  I hope this helps.

  Logan H

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Photoshop CC 2015 is a line connecting the start and end of the brush strokes

  Hi guys,.

  I had a strange problem with a certain brush (size 5px, difficult tour, no shape dynamics, no transfer) in Photoshop CC 2015.1.2.

  It only happens when the drawing very fast on my Cintiq 22HD.

  The problem is PS is a line connecting the start and end of the brush strokes. I don't hold in shift or whatever it is.

  

  Here's my brush settings:
  

  I use a PC with these specs:

  Intel Core i7 - 4790 K 4.00 GHz

  ASUS motherboard

  NVIDIA GeForce GTX 970 (10.18.13.5354 driver version)

  16 GB OF RAM

  Cintiq 22HD

  Win 10
  

  Is it a question of PS or Cintiq?

  Thanks for help.

  OK, here is therefore an update.

  The problem is not at all with Photoshop or Cintiq, with Windows 10 parameters of the stylus.

  Fortunately, there is a small piece of free software that you can download called "Fix my pen" (by Smith Reddy) which defines the features of Windows Tablet PC in the registry for you (essentially by disabling everything related to it):

  viziblr - News - difficulty my pen makes your Wacom tablet JUST WORK on Windows 7

  It works fine on Win10 too.

  Now, as my original problem with Photoshop to do a line connecting the start and end of the brush strokes left, however I have another question more small that came after running difficulty my pen. The lines that I draw now are not smoothed by a software more. You can see the difference below.

  

  Fix My Pen sets a lot of things in the registry, but you cannot individually control which setting is disabled. So I guess that one of them is the cause.

  

  I expect response from Smith about it, cause I have no idea who he is.

• I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  Hello

  This link might help: changing the language setting of your Cloud Creative applications

  Kind regards

  Sheena

• PowerCLI defining politics NTP to "Start and stop with the host" in ESXi 5

  Would appreciate any help in the definition of the strategy NTP on ESXi 5 hosts 'start and stop with the host. My script is currently using the following:

  Get-VMHost MyEsx | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-policy "automatic."

  This sets up the NTP service in "start automatically if all ports are open and stop when all ports are closed.

  "When I cange to 'MyEsx Get-VMHost | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-political ' market / stop with host"" the following is returned:

  «The possible enumeration values are "auto, On, Off«»»»

  Anyone know of a way (in PowerCLI) of the set up for the 'start and stop with host?

  OK, then you should choose politics "on".

  These are the policy values and what they match.

  

  Like this

  Get-VMHost MyEsx | Get-VMHostService | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy On
  

• Re: My Qosmio F60 - 11f is VERY SLOW and stuck all the time

  Hi everyone :)

  I have a qosmio f60 - 11f with 2.26 to 3.3 with turbo i7
  6 GB of Ram
  640 GB HHD
  1 GB Nvidia GT330M graphics

  the problem is that since I bought it and its slow I don't know why!
  Now the laptop over 14 months and I did a lot of recovery time because of problems and stuck, I him.
  last day I did the cover and I noticed that the laptop is becoming slower!
  It takes about 5 minutes to get started! not only that, after started and open any folder you will notice how slow it is. Even in the videos I can't open it because the laptop will be stuck and play the video very very slow!
  Please help me.

  Hello

  First of all I recommend to check the HARD disk for disk failure HARD errors that may affect the performance of the computer, you should check the HARD drive using freeware tools one of the tools that I use is the Drive Fitness Test he has been published several times here in the forum and its really great software.

  If the HARD drive would be ok and if no error would be detected, then, I recommend disabling some processes that are not important for you in many cases different tools would be charged during the OS start process and these tools run in the background that slow down the operating system.
  Run msconfig and check the Startup tab
  Here you will see all the programs that are loaded at the beginning, you can uncheck the tools is not necessary

  Note: If you are not sure what means the only process, use google and search in internet for more details otherwise don't disable this.

• BlackBerry Curve 9300 Smartphone does not start. Stucks at the splash screen

  Hello

  I have a brand new Curve 9300, and within a week he is a. I updated its OS to version 6, and it worked perfectly.

  When I tried to configure my email, he asked automatically updated with the installation of my e-mail service provider software. I chose just ok. I received three warning messages, which I don't know exactly but it was something may not work correctly (with respect to the difference in version). I just kept facility, and he asked to reset.

  When I restarted the laptop, it goot stuck to the start screen. Then nothing! The thin status bar below fills BlackBerry logo until either full, nothing happens. When I wait more long (a few minutes), I get a message on a white screen with a small font with "App Error 606", with an option to "RESET".

  I took out the battery and restored a few times, nothing different.

  Notes:

  • The LED does nothing, except for a single red wink when it restarts
  • The keboard seems to be sensitive. I get the Alt and shift indicators at the top right when I press on the
  • The power button does not appear to cause any response

  I appreciate your help.

  Edit: Desktop software indicates that the device is not connected, even if it is attached to the USB cable.

  Edit: The combination Alt + Shift + Delete causes the system to go to a blank white screen with this "app" error mentioned above

  You use BBSAK or JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

• Speed setting is grayed out and stuck on the slow mo

  I use the iPhone 6s and I shot some footage in slow mo.

  I then added clips from high refresh rate both the line however, they are all stuck on the slowest setting and the speed is grayed out.

  I restarted the phone and created new projects without result.

  Hi Ryan,

  You do not have something wrong. This is the expected behavior. Now Clip you cannot change the speed of slow-mo clips.

  If there is a feature you want to see added, feel free to start a new thread on the forum.

  Best,

  Peter Garaway

• Firefox does not account settings to open the home page to start and open rather the previous tabs

  Opening of Firefox, the browser displays my previous session, despite my selection 'display the homepage' or 'show white screen' on the opening.

  You can check if you have a user.js file in the Firefox profile folder (a detailed list of the system shows that you have) which defines the pref browser.sessionstore.resume_session_once to true.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  (I noticed that the mozillaZine knowledge base is down at the time of this posting)

  The user.js file will be present if you or a other software created this file and normally will not present.
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • https://support.Mozilla.org/KB/profiles

  Windows hides certain default file extensions.
  Among them .html and .ini and .js and .txt, and you can see only a file name without file extension.
  You can check the file extension (type) in the file properties in Windows Explorer via the context menu.

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• Tecra S1 does not start and hangs at the splash screen (boot)

  Tecra S1 model PT831E-107EQ-GR

  Problems started a month ago. Randomly, he didn't not started. After some power or off attempts it finally started and worked properly. I bought a new hard drive (Toshiba 40 GB) because it happened more often. I got Acronis True Image and planned to clone a disk to the new disk. The problem is that a cell phone now won't start any more so I can't boot from a CD or hard drive. It stops at the logo 'In Touch... "with text" Press [F12] for boot device selection menu ' and does not react any key. I tried to boot with no CD, no disk hard - the same thing. I also connected internal HD using ATA to USB adapter - even. This means that it is not a disk problem but motherboard, or other components? Is it possible to get into the BIOS before boot selection screen?

  Kind regards
  Jacek

  Hello Jacek

  Try to enter the BIOS to ESC settings initially upwards.
  The question is strange and I do not think that anyone here can offer the exact diagnosis. The fact is, you can use multiple bootable devices but if there is something wrong with the motherboard HARD drive CD/DVD doesn't work. CD/DVD or HARD disk controller is maybe defective.

• my laptop does not start and gives me the error, load the required DLLs for kernal

  When I went to start my computer would not start and just says load needed DLLs for kernal and communicate with my support. I don't know what the problem is or how to fix it. It was working fine when I finally stopped him. any help is greatly appreciated

  Hello

  Method 1: Please follow the steps mentioned in the article mentioned below:
  Error Messages When you start your computer if Program Files of Windows are missing or damaged:
  http://support.Microsoft.com/kb/812450

  Method 2: How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788
  Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

• OS does not start and screen with the error (root) system32\hal.dll windows is damaged or missing black

  I was trying to stop some HP programs to start when I start my desktop computer. I did the following: start > run > msconfig.  Click on startup and unchecked HP four applications. Restarted my desktop computer and immediately had a black screen with the following message:

  The window could not start because the following file is missing or damaged:

  system32\hal.dll

  Please reinstall a copy of the above file

  I can't do anything in Safe Mode or one of the other options. Cannot re - install Windows XP Home Edition because Windows or Internet Explorer 8 will not run. Only the black screen and the message mentioned above.

  I use a desktop Dell Dimension 8400 computer.

  [1] Just finished everything on your step 10. I went with the Microsoft Security Essentials.

  [2] I still need to download site driver Dell trying to correct this "floppy seek failure pilot 1,2 and 3 not found: ATX, SATA 1, 2 and 3' problem"

  [3] I just got e-mail from Microscoft response that the thread that I created has been deleted, so I answer to you of a past replica.

  Wanted [4] Thank you for your time and patience to help me. Is there something else to do for me, you can recommend?

  A1. Wise move IMHO. The computer seems "snappier" now?

  A2. I can't imagine that another owner of a Dimension 8400 (or 4800?) has not encountered this problem before. Discover (i.e., search) the Dell office equipment forum: http://en.community.dell.com/support-forums/desktop/f/3514.aspx. If necessary, start your own new thread (registration required).

  A3. If you start another thread on the computer, I have posted a reply to this & you asked to publish a follow-up replies to your original thread. [?]

  A4. Welcome & thank you for your comments.

  In fact, there is something else you may need to do: it turns out that KB2607712 is replaced by the KB2616676 in Vista & Win7; Windows XP needs to have both installed [despite the mention you referred in your post on September 14, above] !!!

  => So if Update for Windows XP (KB2607712) is NOT listed in Add/Remove Programs, you will need to manually download/install a revised version [long story, involved - you don't want to know]:

  ~~~~~~~~~~~~~~~
  ACTIONS:

  1. open Internet Explorer to http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27244 & click on the button CONTINUE.

  2. after VALIDATION, download the installer for KB2607712 & save it to your desktop - NOT run again!

  3. close all open applications (that is, anything with an icon on the taskbar).

  4. double-click on the file that you saved in #2 above to install the update. Follow all the instructions (reboot required).

  5. check that the Update for Windows XP (KB2607712) is now listed in Add/Remove programs.

  ===============

  PS: If you have NO Office or Silverlight or any installed Windows Live Essentials application, I can tell you how to start your Windows XP computer & full load more quickly.