Dynadock - strange popup at startup!

Similar Questions

• How to remove annoying POPUPS ON STARTUP

  HI -.

  After that I have on intel.com attempted to update my graphics driver Mobile Intel (r) 965 Express Chipset Family my startup screen displays a popup with the text box:

  C:\Windows\System32\igfxtray.exe

  I wonder 'Run' or 'Cancel', but no matter what I choose exact same popup appears at startup again and I have to click 3 times Cancel to get the box disappear - it does not seem to affect my use of the laptop but it is a little annoying as his watch.

  On the help forum windows.com I followed suggestions without help unless the suggestion on Regedit open because many have said med does not tinker in Regedit

  I have no successfully posed this question on a forum within intel.com

  Someone at - it there a suggestion what to do?

  Thanks in advance

  DonOlesen

  Hello

  The igfxtray.exe seems belongs to the Intel driver and this file belongs to a software for fast access to the control panel via an icon in system tray of graphs based on Intel processors.
  Usually, you should see a small display Intel icon in the task bar in the lower right.
  The igfxtray.exe controls this.

  So you can also disable this in msconfig.
  Search type msconfig. Then, choose the StarUp tab and choose Remove the mark of the entry containing the igfxtray.exe
  Now save the changes and restart the device

  To disable this popup.

• Strange behavior of startup and cannot access the tools-> options menu

  Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI.  If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI.    Furthermore, I can't open the tools-> option menu from a façade of VI.

  I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!

  I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior

  Help - please!

  Hi AMHurrel,

  This seems quite strange.

  Have you changed anything on your installation?

  When you say you did a complete removal and reinstall, how?

  Here are the steps I follow:

  The following procedure removes the software Instrument National:

  1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
  This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.

  2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
  and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
  the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
  Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
  NOR-DAQ, then last LabVIEW.

  3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
  Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.

  4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
  The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
  and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.

  5. remove the following components of the registry in the Windows registry:

  HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
  keys with 1093 in them.
     
  Don't worry if one of these trees are not listed. Continue with the rest of the process.

  Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
  Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
  Publisher of the registry (regedit).

  6. close regedit.

  7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
  "C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
  different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
  then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.

  Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.

  8. save the attached file msiBlast.zip to your desktop.

  (a) extract the msiBlast.exe file from zip archive.
  (b) double click the downloaded msiBlast.exe file to run the executable.
  (c) choose the selection show only installers of NOR.

  (d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
  (e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.

  (f) Optional:
  The repair option will open the installer of National instruments and run the option fix in the installer.

  Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.

  9. restart your computer.

  10. you should be ready to install your software. For the cleanest possible installation, first install all of your
  software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
  Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
  Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
  Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
  must be installed before the pilot. Download the latest versions of the drivers that support your hardware
  She draws from our drivers and software updates (link below) and install them one by one, reset after each
  install.

  11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.

  NEITHER drivers link:- http://www.ni.com/softlib.nsf

  * Attached is msiBlast.

  You get an error message?

  Let me know what you think,

  Kind regards

• Form1 popup at startup

  Good so I found an interesting problem where whenever I start my computer, I get a pop up in the upper left corner of my screen named "Form1". Now I've already looked everywhere on how to solve this problem, but nothing really seems to help.

  Form1 contains a message 'click on Skip Ad to close this window' so that a Linkbucks advertisement which leads me to believe that it is advertising and other software, there is also a section under advertising which have a box saying "your download is ready" with a button download and dubious 100% Safe' message below.

  I've done a bit of Malware Bytes and put in quarantine of some issues that came, but my computer restarts the window form 1 proceeded to pop up again.

  I already open MSConfig and looked through my boot options, but it seems to be nothing in respect to the pop - up of Form1 at all in there, think of you guys could give me help? It would be much appreciated.

  In addition, there is an element of startup called "Sony", but he says that the manufacturer is "Unknown", I doubt that its related to the pop up of Form1 because of the name, but I've been wrong before. In fact, I'm pretty sure it's related to Sony Vegas.

  I would also like to add that this popup can be closed using the window manager of tasks under 'Applications', but there will be poster at every start

  Use Autoruns and verify the path.

  Also try the clean boot.

  http://support.Microsoft.com/kb/929135/en-us

• Window in OS 10.11.5 strange popup

  Hello

  I wonder if anyone could shed some light on this one?

  I get this strange pop-up appearing randomly all the days or weeks - see below. It happened a few times now and I'm wondering if my laptop is compromised in any way. I have the two Firevault and Firewall enabled in system preferences. The window appear kin Finder and disappears after any button is hit and nothing else seems to happen after that. It seems to be the same text each time.

  

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• How can I disable automatic popup at startup ads?

  How can I disable popups when I open Mozilla?

  Hello, please try to reset firefox and see if that can solve the problem...

• Strange delay at startup Satellite 1800

  I used my S1800-100 several times at startup without problem. I didn't have problems if I install the new (2nd) memory to the system not to boot.

  But now, even if the system is to default settings (default factory memorry and there on the slot A), my system at too long startup delay. I was supposed to it does not start and I connect me on, but before that, he initialized successfully.

  Why has it happened? Why my computer is delaying too long to start (I guess because of memories, but why)?
  Thank you.

  Hello

  I think it happens because the second module of memory support a lower speed.
  Did you use the same kind of module that first and it is recommended by Toshiba?

  To my knowledge if the unit uses two modules, so it's a bit slower both modules will work with the slower speed and performance.
  Therefore, it is very important that both modules are similar.

• Re: Satellite L655 - very strange problem at startup

  Hello

  A problem with my Toshiba Satellite L655 of weirdo. Basically I even don't know how to explain it exactly.
  I write what actually happens...
  Almost any time when I turn on my computer by pressing the turning button as the computer begins to run and download, but all of a sudden after 7-8 seconds it crashes.
  I mean the computer is down and off. In addition, once he arrives there is little "BOOM" strange noise coming from the inside of the laptop.
  I don't know if the power supply (power cable) is related because it comes up with the cable connected and without.

  My laptop running Windows 7.
  I'm afraid that it didn't get injured because too many times, it crashes. I can't work with him:.
  I need this computer to be very good for my studies.
  I want to mention that I have keep the computer very well and performs updates.

  Please if you have any suggestions what can I do...

  Hello

  You know that on this virtual path, it is not easy to say why this is happening. Please test as follows:
  -start the laptop computer and enter the BIOS settings, leave it for a while and watch carefully what will happen
  -If nothing happens by default the BIOS settings and restart the notebook
  -after reboot, press F8 and try to start Notepad in safe mode.

  Thanks for posting comments

• Equium A100 - strange screen on startup

  Recently have been unable to get the use of my Equoum A100 - 549 PSAA4E due to no discerable to display on the screen during startup. It tends to be different vertical & horizontal lines. On the occasion of movement can be caused by the use of the touch pad and once seemed to get connected as had the windows start tune but sscreen still tartan in color.

  Is this a problem with the graphics card of th and it can replace? I've seen some other posts re welded/non-soude types - someone knows 100% what is in this model?

  Concerning
  Craigidi

  Hello

  I would not rely on statements like welding/resolder/etc. Since Don t you know really what could be the problem.

  I suggest you to send your machine to a local partner approved since your description sounds really serious.
  Maybe this link helps you find the next servicepartner in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  It s something like an «ASP "carrier who will guide you to the next available ASP.»

  Welcome them

• SolutionCenter.msi popup at startup of the HP Solution Center

  This just started today:

  When I start the computer installation popup appears, then a msg saying something to the effect that it cannot find the path to solutioncenter.msi and asking for me to navigate to find.  Sometimes when I start HP Solution Center.

  Any ideas?

  I have very good news.

  Released the patch that corrects this problem for some of our products.

  Here is the link

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=MP-77737-1

  Thank you

  Message edited by JonW 24/09/2009 09:24

• Popup at startup

  How to stop the pop-up IBM of appearing whenever I start. I tried to save it as noted several times without success. It's a piece boring pop up.

  Contact the manufacturer of your computer (what you should do!) to the Council about this, or you can try the program below:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Strange screen on startup

  Hi This is Myriam, I have a TOSHIBA Satellite A200 (PSAF0A-02L01C) which I am recovering and resetting of my father-in-law, but when I turn it on it shows the TOSHIBA logo, then it goes to the screen.

  

  It starts with white on the sides and dark green in the middle which will gradually to white. I need to delete Windows 7 and put Windows 10 out there but I don't know what this strange behavior. Please answer because I'm confused of what's going on.

  Thank you! Jadon

  I had to replace a few screens with the image that you have demonstrated.

  You can try to connect an external monitor to see if you get any video. He may require the use of the function button to select display, unfortunately model specific cannot therefore say that we

• "Device Failed to Connect" sound notification with no popup at startup once the desktop appears

  When the desktop appears, I sound "dududu" with no popup. I had to look it up in the audio file and the explanation next to it said noise "device failed to connect.

  I currently have no device attached except speakers and keyboard and mouse. I bought a HP Phopsmart printer and installed but it does not work well, so I uninstalled it. I left the USB cable connected to the computer after disconnecting the printer after reboot several times, and then disconnected. At this time the sound notification has begun.

  I don't know if the printer had nothing to do with it. What should I do to fix this? Help, please. Thank you.

  Hello

  Have you tried to remove your printer as described in the article?

  If no, then try and see if the problem still occurs.

  Also check if the answer given by SpewHole (published on Thursday, April 1, 2010 04:51) helps you in the thread/link below.

  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/c5737e52-b7a7-4c68-B27B-89adb8343716

  Check back for red or yellow bangs in Device Manager and post status.

  Steps to open Device Manager:

  1. click the Start button, type devmgmt.msc and press ENTER.

  You can also check if the problem persists in safe mode and post back with the State, so that we can help you better.

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Kind regards

  Umesh P - Microsoft Support

• Satellite L505-13n makes a strange noise at startup

  Hello

  I have a problem with my satellite L505-13n.

  Listen to what is the problem:
  It makes a very annoying noise when it starts.
  This sound comes from the speakers. I can't describe the sound, but I can't stand it!

  I noticed that when I move the power wire, the noise changed at the rate lower or higher.

  Could someone suggest me something?
  Sorry for my English, if something is frustrating, let me know

  Hello

  I don't know if this will be useful, but I found this Toshiba document which provides a solution if you hear a hissing sound coming out of speakers of m.

  http://APS2.toshiba-tro.de/KB0/TSB0402UB0001R01.htm

  Disable the microphone volume in the speakers properties.
  This could help.

• IncrediMail popup at startup

  Original title: ' pop up '

  Can you help me to get rid of a show that continues to appear each time I turn on my computer? I can't remove it from my toolbar

  or the other.  It's boring

  http://help.IncrediMail.com/English/help/IM/uninstall_incredimail.html

  Q: How to uninstall IncrediMail?

  R: to uninstall IncrediMail, simply do the following:

  1. Click the Windows 'Start' menu, highlight ' programs, select'IncrediMail "and click on"uninstall IncrediMail.

     Note: When you uninstall IncrediMail, you will lose all unsaved data. It is recommended to backup your IncrediMail data before uninstall, in case you want to use it later.

  2. Select the option "Uninstall IncrediMail" (marked in red) and click 'Next' (marked in blue). When asked to verify the uninstallation process, click 'yes '.

     

  3. Once the uninstall is complete, reboot your computer.
  4. Navigate to: C:\Program Files\IncrediMail.
  5. Remove the 'bin' folder to completely remove IncrediMail from your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.oeupdates.com/uninstall-remove-IncrediMail.html

  http://www.pchell.com/support/IncrediMail.shtml

  http://www.fixemailclients.com/uninstall-IncrediMail.php

  http://www.ehow.com/how_5048085_remove-IncrediMail-computer.html

  See you soon.

  Mick Murphy - Microsoft partner