Popup at startup

Similar Questions

• How to remove annoying POPUPS ON STARTUP

  HI -.

  After that I have on intel.com attempted to update my graphics driver Mobile Intel (r) 965 Express Chipset Family my startup screen displays a popup with the text box:

  C:\Windows\System32\igfxtray.exe

  I wonder 'Run' or 'Cancel', but no matter what I choose exact same popup appears at startup again and I have to click 3 times Cancel to get the box disappear - it does not seem to affect my use of the laptop but it is a little annoying as his watch.

  On the help forum windows.com I followed suggestions without help unless the suggestion on Regedit open because many have said med does not tinker in Regedit

  I have no successfully posed this question on a forum within intel.com

  Someone at - it there a suggestion what to do?

  Thanks in advance

  DonOlesen

  Hello

  The igfxtray.exe seems belongs to the Intel driver and this file belongs to a software for fast access to the control panel via an icon in system tray of graphs based on Intel processors.
  Usually, you should see a small display Intel icon in the task bar in the lower right.
  The igfxtray.exe controls this.

  So you can also disable this in msconfig.
  Search type msconfig. Then, choose the StarUp tab and choose Remove the mark of the entry containing the igfxtray.exe
  Now save the changes and restart the device

  To disable this popup.

• Form1 popup at startup

  Good so I found an interesting problem where whenever I start my computer, I get a pop up in the upper left corner of my screen named "Form1". Now I've already looked everywhere on how to solve this problem, but nothing really seems to help.

  Form1 contains a message 'click on Skip Ad to close this window' so that a Linkbucks advertisement which leads me to believe that it is advertising and other software, there is also a section under advertising which have a box saying "your download is ready" with a button download and dubious 100% Safe' message below.

  I've done a bit of Malware Bytes and put in quarantine of some issues that came, but my computer restarts the window form 1 proceeded to pop up again.

  I already open MSConfig and looked through my boot options, but it seems to be nothing in respect to the pop - up of Form1 at all in there, think of you guys could give me help? It would be much appreciated.

  In addition, there is an element of startup called "Sony", but he says that the manufacturer is "Unknown", I doubt that its related to the pop up of Form1 because of the name, but I've been wrong before. In fact, I'm pretty sure it's related to Sony Vegas.

  I would also like to add that this popup can be closed using the window manager of tasks under 'Applications', but there will be poster at every start

  Use Autoruns and verify the path.

  Also try the clean boot.

  http://support.Microsoft.com/kb/929135/en-us

• How can I disable automatic popup at startup ads?

  How can I disable popups when I open Mozilla?

  Hello, please try to reset firefox and see if that can solve the problem...

• Dynadock - strange popup at startup!

  Hello

  I just bought & installed a Dynadock to my Satellite A100. Since the installation, I get a pretty large window pop up whenever I start.

  The window is called "CmEyeDialog, it has two buttons top right each with"? "on them, and in the body, he said ' TODO:?

  I installed the update 2.03 compared to the original, all uninstalled then installed just the 2.03 - whenever this window, except to reboot after everything uninstalling, if no process Dynadock were aboard.
  Everyone recognizes this glitch?

  See you soon
  Richard

  I don't know if this pop-up has something to do with the software Dynadock Mr. but who knows
  However, I recommend installing CCLeaner tool. It is a freeware program (google simply) that cleans up the registry and fix the operating system.
  It s useful and I use it also.

  Then, start the msconfig and check the last tab called startup if no strange service and is not known is initially loaded.

  Best regards

• SolutionCenter.msi popup at startup of the HP Solution Center

  This just started today:

  When I start the computer installation popup appears, then a msg saying something to the effect that it cannot find the path to solutioncenter.msi and asking for me to navigate to find.  Sometimes when I start HP Solution Center.

  Any ideas?

  I have very good news.

  Released the patch that corrects this problem for some of our products.

  Here is the link

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=MP-77737-1

  Thank you

  Message edited by JonW 24/09/2009 09:24

• "Device Failed to Connect" sound notification with no popup at startup once the desktop appears

  When the desktop appears, I sound "dududu" with no popup. I had to look it up in the audio file and the explanation next to it said noise "device failed to connect.

  I currently have no device attached except speakers and keyboard and mouse. I bought a HP Phopsmart printer and installed but it does not work well, so I uninstalled it. I left the USB cable connected to the computer after disconnecting the printer after reboot several times, and then disconnected. At this time the sound notification has begun.

  I don't know if the printer had nothing to do with it. What should I do to fix this? Help, please. Thank you.

  Hello

  Have you tried to remove your printer as described in the article?

  If no, then try and see if the problem still occurs.

  Also check if the answer given by SpewHole (published on Thursday, April 1, 2010 04:51) helps you in the thread/link below.

  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/c5737e52-b7a7-4c68-B27B-89adb8343716

  Check back for red or yellow bangs in Device Manager and post status.

  Steps to open Device Manager:

  1. click the Start button, type devmgmt.msc and press ENTER.

  You can also check if the problem persists in safe mode and post back with the State, so that we can help you better.

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Kind regards

  Umesh P - Microsoft Support

• IncrediMail popup at startup

  Original title: ' pop up '

  Can you help me to get rid of a show that continues to appear each time I turn on my computer? I can't remove it from my toolbar

  or the other.  It's boring

  http://help.IncrediMail.com/English/help/IM/uninstall_incredimail.html

  Q: How to uninstall IncrediMail?

  R: to uninstall IncrediMail, simply do the following:

  1. Click the Windows 'Start' menu, highlight ' programs, select'IncrediMail "and click on"uninstall IncrediMail.

     Note: When you uninstall IncrediMail, you will lose all unsaved data. It is recommended to backup your IncrediMail data before uninstall, in case you want to use it later.

  2. Select the option "Uninstall IncrediMail" (marked in red) and click 'Next' (marked in blue). When asked to verify the uninstallation process, click 'yes '.

     

  3. Once the uninstall is complete, reboot your computer.
  4. Navigate to: C:\Program Files\IncrediMail.
  5. Remove the 'bin' folder to completely remove IncrediMail from your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.oeupdates.com/uninstall-remove-IncrediMail.html

  http://www.pchell.com/support/IncrediMail.shtml

  http://www.fixemailclients.com/uninstall-IncrediMail.php

  http://www.ehow.com/how_5048085_remove-IncrediMail-computer.html

  See you soon.

  Mick Murphy - Microsoft partner

• Photoshop CS4 Extended popup at startup

  Hey guys,.

  Recently, I received help to get the latest patch for the PS and the drivers for my graphics card so I could work with 3D modeling, etc. Once that everything has been updated however, I kept getting this dialog box will appear whenever I started Photoshop. It's slightly annoying and I usually click on 'No' every time, but I'm tired of it. I can't understand what more he wants from me, since I have the latest drivers and patch. The message is:

  Adobe Photoshop CS4 now includes: acceleration in the graphics card. We recommend that you visit the web site of the manufacturer of your video card to download and install the latest drivers. For more information, see http://www.adobe.com/go/kb404898. Go now?

  This page is just an opinion about the features and limitations of the GPU and OpenGL in the PS, which is fine, but why he keep suggesting that I update my drivers? I guess that PS is reading I can't speed up my graphics card, because he thinks that I don't have the most recent drivers. I have access to activate OpenGL etc, but no idea if this message is really all that matters. Should I just check the box "don't show" and go about my business? What do you think guys? Here is a screenshot of the box.

  

  Thank you

  Matt

  This is a standard message box, it is not read what you have installed drivers or anything. He's here to let you know what to do if you have display problems in Photoshop (update your video card drivers). I wonder how many people actually read this message

• RapidBoot fails on unsigned driver

  Obtaining a popup at startup on a driver is not signed and get the following in Event Viewer:

  The PHCORE service failed to start due to the following error:

  Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source.

  PHCORE belongs to RapidBoot.

  Any ideas?

  
  

• Uninstall office 2000 premium with the disc

  When I turn on my computer a pop says I need to insert MS office 2000 premium to use the program.  I don't want to use it and I am not able to uninstall without the disc!

  You can remove the popup and forget to uninstall Office or use Revo Uninstaller. To stop the popup, delete startup entries that refer to MS Office.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Windows VISTA no real Build 6002 message after Windows updates

  To start the message was superimposed in the lower right corner "this copy of Windows is not genuine".  I think there's a quick activation was wearing popup at startup I caught a glimpse of.  I did a scan with Avast boot time, which is a malware/gen inside old Western Digital MyBook utility zip installation file, I got avast delete (I did use the device, since it stopped working 2 years ago).

  I started in safe mode, done rstrui.exe, selected a restore point on 30 December 2011, which was PRIOR to an installation of Windows Update, but after the download.  After restoration, virus definitions updates, boot time scan with Avast... the zip file of WD to the old address will not flagged as infected (but I deleted later anyway). Even now, Windows is genuine.

  Updates automatically installed after the reboot:

  Windows Defender Update - KB915597 definition 1.117.1973.0 definition... Note that this appears as installed December 30, 2011 also.

  I have disabled the automatic updates of Windows installation.  Here are the updates waiting to be installed...

  Security Update for Microsoft .NET Framework 1.1 SP1 KB2656353

  [same] 2.0 SP2 KB 2656362

  [same] 3.5 SP1 KB 2657424

  [even] 4 KB 2656351

  If the problem "not genuine" do not resurface, I will apply these updates, reboot and see if the problem can be reproduced.  Finally, unless a problem with updates is identified.  I kind of doubt the updates were the issue, but just eliminate the variables.

  "Virus found by avast was almost certainly a false positive - the file two years ago, then he must have been scanned hundreds of times since and probably spent every time.

  A Non-genuine message may appear as a result of a "race condition" where a number of processes is competing for resources or files - and the Service for the Protection of software is one of them. This causes a notification to appear, which often diappears on its own later or at the next startup.

  Unless the notification remains standing thanks to a couple of boots, I worry too much on this subject.

  My preference for the .NET updates is to install them separately, one at a time, to reduce the risk of conflict. You must also leave the machine for about 10 minutes after the restart of an update of .NET, because it often takes some time to "optimize" the installation later.

  HTH

• How can I fix C:\windows\system32\newdev.dll - an application not valid win 32?

  The laptop seems to slow down for analysis from the window of newdev.dll skipped upward.

  Hello

  1 do you get the popup at startup (when the computer is started)?

  2 did you change on your computer before this problem?

  Method 1: clean boot the computer and see if that helps.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

   

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

   

   

  Method 2: SFC scanner.

  Reference:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

   

   

  You can also check:

  Optimize Windows 7 for better performance:

  http://Windows.Microsoft.com/en-AU/Windows7/optimize-Windows-7-for-better-performance

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Pop-up message hidden in the opening 6 Lightroom on a Mac?

  When I open Lightroom 6 there seems to be two screens/message window that appear for a very brief moment. I can't find these pop-up windows once the program opens. Y at - it something to see what these are? They can initially be a problem starting on occasion so I wonder if there are questions to answer. Thank you.

  Hi dawnw,

  If you don't see this error before she disappear, then there is no way to find the message.

  You can disable the GPU in the Lightroom preferences and check if you still get some popups on startup.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Best regards, Mohit

• popup message each startup (boot) - error while unpacking program, code 2.

  I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.

  VISTA Ultimate 64-BIT

  1 MESSAGE POPUP
  "Error while unpacking program, code 2" Please report to author. »

  2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
  "An error occurred when loading library commonforms.dll::RegisterWindow

  It may have been removed. Please reinstall the Application. If the problem persists contact technical support. »

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Microsoft Safety Scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: If no threat found check if the file is necessary or not, then delete it.

  Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.

  Learn how to install Windows Vista Service Pack 2 (SP2):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the information is useful.