Dynamic action, not shooting after having sailed on the next page of report

Similar Questions

• Skype not opening after having moved to the Applications folder

  Back a few months ago, I downloaded Skype on my computer. I was still pretty unfamiliar with the Mac at the time, so I was not very well what to do with the dmg that I got. Simply do not know better, I ended up launching Skype from the dmg. That's how I used Skype until very recently. A few months after this happened, I learned that you were supposed to copy the application in the Applications folder on the dmg. However I did not worth to fix this error until now (in order to remove this disk image of Skype sitting there). I deleted the Skype of the dmg icon on my dock and copied in the Applications folder. I then tried to run, but it crashed before it could do something. The main window of Skype did not appear.

  If it's worth anything, there is a very old version of Skype on this computer, the surplus of when a member of the family used a few years ago. However Skype on the dmg would be fine, so I doubt that this could be the culprit.

  I am running OS X Yosemite 10.10.3 on an iMac 27-inch Mid-2010.

  We always recommend to install the latest version of Skype... That said, try this: download the latest version by clicking on the link at the top of this forum page downloads. Then, open the Skype.dmg file you will find in your downloads folder. Drag and drop the Skype icon to the icon of the folder Applications in THIS WINDOW. This will install Skype. Subsequently, you will find Skype (the application) in the Applications folder on your hard drive, where you can start. Once it launches, click right (or click/hold) Skype in the Dock icon and select Options. Choose to keep Skype in the Dock, and it will fortunately still live there then.

  --
  Entia non sunt multiplicanda praeter necessitatem.

• Satellite L870-165 does not work after having been repaired by their service

  Warranty Toshiba Laptop does not work after having been repaired by their service twice.
  Model: Satellite L870-165

  Computer does not start, rest with black screen showing: No bootable device - please restart your system

  After restarting the same thing happening again.
  I called incident phone Toshiba and after trying several options, I said take it for repair service.
  Told me first of all it was the hard drive, then called me to indicate this resettlement and ultimately it was the motherboard, what would have changed. The next day, being chosen computer repair returned to give exactly the same mistake, due to a malfunction only one night.

  After another call to 902 Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I arrived home the computer does not start only once, again gives the same error.

  I think this team comes with a default factory that his solution is not easy, because even the technical service told me I didn't know what to do with it.

  Sorry to hear all this. Unfortunately, we can not help you much so try please clarify this service. They help you with your laptop even if all must be exchanged.
  > Warranty Toshiba does not work after having been repaired by their service
  To be honest I don t understand this sentence. How old is your laptop? warranty is already expired?

• I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails. Also Microsoft Office Outlook often does not open without having to restart the pc. ___

  I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails.  Also Microsoft Office Outlook often does not open without having to restart the pc.

  Hi hound3101,

  Welcome to the Microsoft Answers community.

  a. you are able to install some other updates?
  b. do you receive error messages when you start Microsoft Office Outlook?

  If you have a problem only in the Office Update installation, then I suggest you to report your problem in the Office Discussion groups. If not, try download office update from the link below and install it in clean boot mode.

  Link to the Group Discussion Board: http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx

  To enter the mode of clean boot of your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after starting the computer, install the update.

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• APEX 4: Dynamic Action to manipulate a search string in the interactive report

  Hello
  
  I have the following problem. I have an interactive report that shows a few columns and one of them has a barcode that has been saved as a numeric value for display in the column is something like ("123456789"). All works fine so far. If anyone 123456789 they will get the right line and all is well. Unfortunately if I scan in the barcode with a barcode scanner, he enters '01234567890'. I don't have nor the ability to reprogram the scanner BC and I can't change how the data gets displayed.
  
  So I thought I would create a dynamic action that is triggered when the contents of the textfield object change. So, I've created a dynamic action, selected jQuery and entered .apexir_SEARCH and the Change event.
  I then chose to run JavaScript and entered as cod:
  
  var newsearch = document.getElementById ('apexir_SEARCH').value.replace (/ ^ [0] + / g, ");
  var inputObj = document.getElementById ("apexir_SEARCH");
  If (inputObj)
  {
  Update of the value
  inputObj.value = newsearch;
  }
  
  So far so good. When I load the page and enter a value from a '0', it works like a charm and it removes the zero. But if I delete again on the page and the search filter, dynamic action will do nothing. I'm really confused, as if I just made a mistake in the JavaScript code or what is the reason, that the action runs only the first time. I have to reload the page and then it will still be to manipulate the string once, but the second time, it won't.
  
  I'm very happy for any help you can provide!
  
  Thank you
  Dennis

  Hi Dennis,

  The thing that comes to mind is to check that the scope of the event of dynamic action is 'live '. If it's on (default) bind, then when a partial page refresh occurs, action will not fire the first time. Direct fires each time.

  Hope this helps

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted

  Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted.

  I have also changed the CLASSID HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {BDEADE7F-C265-11D0-BCED-00A0C90AB50F} / instance DontRefresh value to 0

  Hello

  (1) have you made changes before the start of this issue?

  (2) what happens when you try to start in safe mode?

  To start your computer in safe mode, you can see the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  I suggest you to place the computer in a clean boot state and check if the problem is resolved:

  1. sign the computer by using an account with administrator rights.

  2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start The System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  3. on the general tab, click Selective startup, and then click on to clear the load startup items check box. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

  5. click OKand then click restart.

  6. check if you still have the problem.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual after you have finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start , type msconfig.exe in the Start Search box and press ENTER.

  1. If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click restart.

  If this does not work, try to run a SFC scan. To do a SFC scan follow the steps below:

  Use the System File Checker tool, which is also called scan SFC.

  File system (CFS) auditor verifies that all Vista system files are where they should be as they are by default and not corrupted, changed or damaged.

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select Run as Administrator.

  2. click on continue or provide administrator credentials if prompted.

  3. in the command prompt window , type the following, and then press ENTER:

  sfc/scannow

  4. you should see messages on the screen the following:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  5. once scanning is complete, check to see if the problem you are experiencing is resolved or not.

  Hope the helps of information.

• Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image

  Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program

  Hello... Adobe, you have a phone number I can call to talk about this?

  Why don't answer you my survey?

• How to run the code (invisible) after connecting and before the first page of the user.

  Our site has a standard login page that I can't change. But I want to run code 1) after logging in the application (not APEX!) and 2) before the first page of the user of the application. How could I (can I?) put it on a page that runs invisible and then transfers it to the first page of the user application? Also, it would be great for testing I could reiniitalize easily between test scenarios without having to log in again.
  
  Thanks - Howard

  You could put it on page 0 and condition the process so that it works only on the login page.

• I can't drag to the next page after placing my dps edge animation

  I've created an animation on board and it was exported in a file .oam. I placed it in dps (size full page) and even if he plays well I can't slip between the pages.

  Initially I thought rather than to use the animation to the size of the whole page I could use it smaller so I'd be able to drag the area outside of the animated object. My problem is that the background of the page is a color gradient and that I failed to export my movie with a background transparent I need to configure the background on the edge also. This leaves me with the problem of how navigate to the next page?

  IM new on Board (as you can probably) so any help is greatly appreciated.

  Thank you

  Hey Ross,

  Currently there is a bug when using DPS where it will not erase the image of the poster of the composition and the rest in the background when playing DPS. Your animation play automatically? If so, I have a solution for you.

  If you set your image of the poster to transparent and transparent Stadium, the animation will play on a transparent background. Create a 1 x 1 transparent png and import it into your composition of EA. In the publishing settings, set this PNG file to your image of the poster.

  

  Also make sure your color from the scene the alpha value of 0%.

  

  Publish and you should be good to go.

  Regarding the impossibility to swipe, animated compositions import in the form of "Overlays of Web" which means the overlay in the most literal sense; they are placed on top of your publication, so no interactivity you may interfere with the actions of your publication created in code. You can opt to disable interactivity in the Panel of the web to ID card overlay, even if this may defeat the purpose of your publication set. It seems that in your case if you are able to get transparency floor works that could address some of the problems you had.

  HTH,

  Sarah

• use javascript advanced action to advance to the next page of parent window?

  Hello

  I'm looking using Captivate quiz in some provided training based on html. I have this type of structure:

  Page html with a conceptual content.

  Html b. with a conceptual content page

  Page c. html which displays a Captivate quiz question

  Html d. with a conceptual content page

  When the user finishes the test successfully at point C, I want to automatically advance to the next page of the html (D).  I'm assuming I could use a tip action in the Quiz properties. In other words, 'the success = Execute advanced Actions', then to run our javascript gotoNextPage() function.  But it does not work. Is there a trick to do something like that?

  Thank you!

  If you test this output on your computer, try to upload to a web server and test from there.

  I find a lot of actions executed in Captivate JavaScript works only when the content is served from a Web server.

• Script code of action to link to the next page

  I'm new to Flash and Action Script and looking for help. I have a Flash file that I created for the opening of a Web site page. I want the movie to play once (the SWF file is inserted into my Dreamweaver site index.html page), then continue to the next page (the "Home" page) of the Web site. I guess I should insert this code at the end of the timeline in my Flash file, but I'm not sure what should be the code. Can anyone help? Thank you.

  Hello

  I want the flash code of the file

• Jump to the next page after you download a pdf file

  Hello

  I have three links on a page that loading the files pdf however by clicking on the fisrt link is OK, but if you click on the 2nd it jumps to the next page in the course.  I want him to stay until someone clicks on the next button only.

  Thank you

  Ken

  Hello

  You must change the click box or the button that opens the PDF file. There is an arrow down to the right of the field. You click it to choose New to coax the PDF to open it in a new window. Looks like you have already done. You must click again and uncheck the option "continue to play the project.

  Once you do this slide should stay put.

  Note that this action will have to occur on each of the boxes of buttons or click that open external documents.

  See you soon... Rick

  Click here for Adobe Certified Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Icons wiggle and move in the home screen but will not go to the next page

  Icons wiggle and move in the home screen but will not go to the next page

  You need to move to the edge and hold the button for a few seconds so he can move to another screen.

• I have placer place text, and then change the font size, but it does not flow to the next page

  Hello! Tell when I have text that fits into a page, because it is absorbed in indesign with a great font size small. Then when I want to increase the font size it does not continue on the next page. How can I get there?

  Thank you very much!!

  Click the port at the bottom right of the text block to recharge the cursor, go to the next page and click to place it.

  If this is new to see you:

  Text of wire among images in Adobe InDesign

  InDesign 03 - Mini tutorials - threads of text - Threads view - overflow of text warnings areas - YouTube