Dynamic action on upper and lower region button

Similar Questions

• Dynamic action to hide and show a button

  Hello
  
  How to set the dynamic Action on an item Page (P4_DATA)
  
  When the value is 0, then show the button (P4_BTN)
  When the value is 1, then hide the button (P4_BTN)
  
  I have a dynamic action that work very well, but only for the display option, does not work for a button
  
  
  Thank you

  You must add a handful to the button so that you can access in the Action(make sure that you have #BUTTON_ATTRIBUTES# substitution string referenced in your button template) dynamics.
  in the attributes of the button, specify

  ID = "MY_BUTTON".

  MY_BUTTON is just an example

  "Now, when you choose assigned to the dynamic Action of the elements, you can choose" * selector DOM * "and specify MY_BUTTON"

• upper and lower filters in the registry how ca I get it back

  in the registry, how can upper and lower filters I get them back. CD and dvd not being recognized

  Hello

  You are not absent from these filters, you do not want in most cases.

  This is for Windows 7 and Vista is very similar.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Lack of upper and lower filters

  My cd/dvd drive is missing.  I tried the resolution posted with disassembly of the upper and lower filters, but they are not there.  I can't find another solution anywhere!  Help! Student with upcoming finals and projects to complete.  Thanks in advance :)

  Hello

  Step 1: Please do all the below even if you did before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• my cd/dvd missing Mr fix not planned I also tried upper and lower in the regester not there to remove

  CD/dvd lack tried to delete the upper and lower part in the registry but were not there to remove. tried to delete the device manager that he should not delete and re-start

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Upper and lower filters with Windows 7 (32 bit).

  My Medion compute'rs DVD/CD player continues to try to start when not used. (flashing on it and noise coming from it, but is not).

  Medion support sent me a fix on how to a install and re install upper and lower filters.

  I typed in REGEDIT and followed their instructions until I went into the registry editor and click 4D36E965-E325-11CE-BFC1-08002BE10318 to select this key, but I don't see the upper and lower filters listed, to remove via the keyboard in the right pane.

  They are listed under a different name. ??

  Thanks a lot guys, I'm a beginner and never went in the hidden depths of Windows before.

  
  

  emember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I remove upper and lower filters in the registry

  1. I have a laptop HPG60_441, OS is Vista.  Whenever iTunes is updating their software, my CD player stopped working.  (TSST corp CDDVDW TS - L633M ATA device - "this device cannot start Code 10)  I think that I fixed it last time by removing the upper an lower filters in the registry, but I can't find the instructions that I used to do.  If I remember correctly, it was a very simple set of instructions and does not need to download anything.

  You asked if there is a guide on how to delete upper and lower filters which I've provided in the link above under the Let Me Fix it myself section.

  Windows 7 or Windows Vista

  1. Click Start , click all programs.
  2. Click Accessories, and then click run.
  3. Type regedit and then click OK.
     If you are prompted for an administrator password or a confirmation, type the password, or click allow.

• I got my redemption code. When he asks me to sign seeking a password with upper and lower case. When I enter a password generated, it recognizes my email and account and ask my original. When I get my original password he won"

  I got my redemption code. When it asks me to connect, it wants a password with upper and lower case. When I enter a password that I generated, it recognizes my email and account and asking my original password. When I get my original password it will not accept it. I'm going in circles?

  If you are unable to log in with your password, you can reset it. If you need help with it, please Contact Customer Care

• UPPER and LOWER functions

  I read on the UPPER and LOWER functions, and there is something that is not very clear in my mind.
  
  Is this affect function as compared to strings or one provided by the user?
  
  that is the GUITAR of table contains one row with the ACOUSTIC value.
  
  Select *.
  OF ' GUITAR
  where x UPPER SIMILAR (aCouSTic)
  
  Will be both the lines and the entry will be changed to UPPER case for comparison or only user input?

  Moreover, you don't need to use AS when there is no wildcard characters in your string.

  where x LIKE UPPER('aCouSTic');
  

  is the same as

  where x = UPPER('aCouSTic');
  

  Published by: hm on 20.10.2010 12:17

• How to cut the upper and lower parts in PrE8?

  Hey!

  What is the best way to 'cut' capital letters and tiny pieces of the video screen and finalization that like a movie? I try to get a large "cinematic" with this look, but I'm not sure how well do things. I found, and that by adding adjustable black 'streaks' to the upper and lower part of the screen, but y at - it a way to film the last hand count only the pixels that really show us the picture?

  If I use the effect, the film is always rendered at 1280 x 720 pixels, but I try to avoid making these 'blackened' top and bottom pixels on the screen.

  Okay, I'm not sure if I make my self clear with this crappy description but I hope you understand. ;-)

  Thank you

  -Mike

  Are you trying to turn a 4:3 video to 16:9?

  There is a way to fake - although it is upscaling, if your video is not clear.

  To do this:

  (1) export your video filled with your current project to share/Personal Computer / AVI.

  (2) open a new project. Go in your project settings and change them to widescreen.

  (3) get media/PC files and folders to add the AVI file your created in step 1 to your project, and then add the item to your timeline.

  (4) make a right click on your clip on the timeline, and then select view properties to open the properties panel.

  (5) open the query property in the properties panel and set the scale to 133%.

  Voila!

• Show and hide regions / buttons by changing the item values

  Hello

  is it possible to change a value of an element (LOV) that in the dependence of the selected a region of value / button see the STI or hide?

  I try this with the conditions of the region / button, but it does not work...

  Workspace: TEST_OA5
  Username: [email protected]

  password: Hund123

  Page: 2

  
  

  THX for the help,

  
  

  concerning

  René
  

  Hello

  I've added a new dynamic action called ANIMAL SELECT and changed the terms on your reports using P2_TIER_AUSWAHL

  Gus

• In table form, a dynamic action to disable and set of columns of text

  Hello!!

  With the help of APEX 4.2.6 with Oracle 11 g R2, someone I work with has a tabular presentation of the need to do the following:

  Tables has the following provision:

  

  When the user selects the UOM LOV Dollars, the rate must have related associated text box the amount set to 1.  We currently have JavaScript disable and set the background color, but fo rth elife of me that I can seem to help set the value...

  The code we have in dynamic action:

  < tt >

  ROW_ID = $(this.triggeringElement).attr('id').substr (4);

  If (. val() $(this.triggeringElement) == 2)

  {

  $(«#f04_» + row_id) prop ('readOnly', 'readonly');

  $(«#f04_» + row_id) prop ("class", "textinputdisabled");

  .Val (1) $("#f04_" + row_id);  < = Here's where we had the question...

  }

  on the other

  {

  $(«#f04_» + row_id) prop ("readOnly", false);

  $(«#f04_» + row_id) prop ("class", false);

  < /tt >

  Thank you

  Tony Miller
  Los Alamos, NM

  Hi Tony

  What exactly is the problem here? I have no problem setting the value using the method described above. There is even a '1' in the screenshot above, no doubt, which indicates that the value has been successfully changed.

  For ease of improved management, I'd use traversal Dynamics for the form element affected, rather than hard-code the ID (or go with a DA conditional with distinct actions of true/false), but the jQuery code to set the value is the same:

  var uom, rate;
  
  uom = $(this.triggeringElement);
  rate = uom.closest('tr').find('td[headers="RATE"] input');
  
  if (uom.val() === "USD") {
    rate
      .prop("readOnly", true)
      .addClass("textinputdisabled")
      .val("1");
  }
  else {
    rate
      .prop("readOnly", false)
      .removeClass("textinputdisabled");
  }
  

  (I used a static LOV in the column of the unit of MEASURE, so the value of '$' is 'USD' rather than '2').

• How I difficulty upper and lower filters so my cd / dvd drives work?

  I have cd and dvd readers built in and an external cd/dvd burner / reader and none are able to read or write properly. I have a Dell Dimension 4300. under xp. Long time there is a similar problem happened and upper / tiny filters necessary twisted, but I do not remember how. Help, please.

  In the Run dialog box, type regedit, and click OK:

  Navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  With the right button of the upper filters button, if necessary, and then click 'remove '. Click on the Yes"" button.

  Click the lower filters key, if present and click 'delete '. Click on the Yes"" button.

• Firefox toolbar upper and lower are suddenly "floating", disappearing and appearing, and it is not convenient for me. What can I do?

  Top Firefox toolbars and below are suddenly "floating", disappearing and appearing, and it is not convenient for me. What can I do? I need them to be there all the time.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
  
  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  
  You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press F11.

• SL500 - upper and lower key

  Hi guys

  This may sound really stupid, but I need to use more and less than >.< (i="" found="" them="" in="">

  I press Shift + and I get;

  I press SHIFT +. and I get:

  is it possible to get these symbols I need for linux and a web programming

  Which is the combination to get these?

  Thank you very much

  What type of keyboard you are? US, UK, or another mode. To get your desired key combination, you must change your keyboard in US mode mode, you can do this in the Panel control, under regional and language icon.