Dynamic and rounded Table numbers
https://Acrobat.com/#d=Q4mPXOglMmVaowXHe8urxw
I'm creating a timesheet that will complete (I hope) (calculated from the time you enter) hours at a quarter of an hour. I have it in the first line of the work table, however, since it is a dynamic array, copy this number down to the rest of the lines when they are added. I have a script knowledge, I am looking for help on fixing my code so that each line round the correct number.
I don't know how to really put into words, so the link to my form is above. I'm looking for the code for Table1.Row1.hours.
Thanks in advance,
Rose.
Hi Rose,
Here's the back of the form to use: https://acrobat.com/#d=R1qsHYR1bY6-wGZNElVARg.
The issue was that you were using absolute references in the hours field: "form1.page1.Table.Table1.Row1.Hours" (or something like that).
When it comes with repetition of lines, if you referred to just the name of the field in your script, then each instance of this line will know that the script makes reference to the object on its own line: "hours".
Also in your script you do the same calculations several times. I recommend that you do the calc once and assign to a variable. Then, you use the variable.
Hope that helps,
Niall
Tags: Adobe LiveCycle
Similar Questions
-
Is automatic and Table numbering in the Document to multiple sections
I want to set up automatic figure and table numbering that includes a reference to the current section number. (Figure 2-1 = the first figure in article 2; Table 3-2 = the second table in Section 3). I understand how to do this with styles if I had to work with a collection of documents with defined chapters. How can I do this in a single document with a number of defined in section?
Is the only way to define the styles in the list for my items?
I'm afraid you're right. You can include the numbering of the chapters in style with the numbered list, but you cannot include section prefixes. I think that you will have to use the method you suggested.
-
to remove the numbers after the decimal point and round
Hi all
thanking in advanceselect (sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) <> upper('Top')) then (((((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD)*94)/2000) ) when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then ( ((nvl(H.CLASS_V_CEMENT,0)*94)/2000) ) when F.ITEM_UOM = 'Pound' then CEIL( ROUND((((((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100)))/2000 end)*(j.opn_value/2)) SUM_MAT_ACT_TON ,--------transport sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) <> upper('Top')) then ((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD) when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then nvl(H.CLASS_V_CEMENT,0) when F.ITEM_UOM = 'Pound' then ROUND(((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )/P.ATTRIBUTE5) end) SUM_sload , ----sload sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) <> upper('Top')) then ((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD) -- when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then -- nvl(H.CLASS_V_CEMENT,0) when F.ITEM_UOM = 'Pound' and F.BLEND <> 'PH'then ROUND(((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )/P.ATTRIBUTE5) end) BLENDING ,e.opn_job_desc FROM xxnp_opn_joblog_001 E, XXNP_OPN_JOBLOG_EST_002 F, XXNP_OPN_JOBLOG_STAGE_002 G, XXNP_OPN_JOBLOG_SLURRY_003 H, XXNP_OPN_JOBLOG_RES_005 J, MTL_SYSTEM_ITEMS_B P WHERE E.OPN_JOB_DESC = 'K/D/SP158/SA399/1338/D/0510/1' AND E.MANUAL='N' and J.opn_resource_desc='4X4 PICK-UP OR LIGHT VEHICLES' AND E.OPN_JOBLOG_001_ID = J.OPN_JOBLOG_001_ID and F.INVENTORY_ITEM_ID=P.INVENTORY_ITEM_ID AND p.ORGANIZATION_ID='103' AND E.OPN_JOBLOG_001_ID = G.OPN_JOBLOG_001_ID AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID GROUP BY E.OPN_JOB_DESC,j.opn_value o/p i am getting SUM_MAT_ACT_TON SUM_SLOAD BLENDING OPN_JOB_DESC 11587.7954154787 1957.62401925833 1454.62401925833 K/D/SP158/SA399/1338/D/0510/1 well can anyone guide me on obtaining the following output (to remove decimal places and round ) SUM_MAT_ACT_TON SUM_SLOAD BLENDING OPN_JOB_DESC 11588 1958 1455 K/D/SP158/SA399/1338/D/0510/1
Edited by: makdutakdu may 25, 2010 12:48select round( (sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) upper('Top')) then (((((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD)*94)/2000) ) when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then ( ((nvl(H.CLASS_V_CEMENT,0)*94)/2000) ) when F.ITEM_UOM = 'Pound' then CEIL( ROUND((((((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100)))/2000 end)*(j.opn_value/2))) SUM_MAT_ACT_TON ,--------transport round(sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) upper('Top')) then ((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD) when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then nvl(H.CLASS_V_CEMENT,0) when F.ITEM_UOM = 'Pound' then ROUND(((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )/P.ATTRIBUTE5) end)) SUM_sload , ----sload round(sum(case when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) upper('Top')) then ((H.SLURRY_VOL_ACTUAL * 5.6146)/H.SLURRY_YIELD) -- when (F.ITEM_UOM = 'Cubic Feet' and upper(substr(H.SLURRY_TYPE,1,3)) = upper('Top')) then -- nvl(H.CLASS_V_CEMENT,0) when F.ITEM_UOM = 'Pound' and F.BLEND 'PH'then ROUND(((ROUND(((H.SLURRY_VOL_ACTUAL * 5.6146)/DECODE(H.SLURRY_YIELD,0,NULL,H.SLURRY_YIELD)))*94)*F.ITEM_PERCENT/100 )/P.ATTRIBUTE5) end)) BLENDING, e.opn_job_desc FROM xxnp_opn_joblog_001 E, XXNP_OPN_JOBLOG_EST_002 F, XXNP_OPN_JOBLOG_STAGE_002 G, XXNP_OPN_JOBLOG_SLURRY_003 H, XXNP_OPN_JOBLOG_RES_005 J, MTL_SYSTEM_ITEMS_B P WHERE E.OPN_JOB_DESC = E.OPN_JOB_DESC AND E.MANUAL='N' and J.opn_resource_desc='4X4 PICK-UP OR LIGHT VEHICLES' AND E.OPN_JOBLOG_001_ID = J.OPN_JOBLOG_001_ID and F.INVENTORY_ITEM_ID=P.INVENTORY_ITEM_ID AND p.ORGANIZATION_ID='103' AND E.OPN_JOBLOG_001_ID = G.OPN_JOBLOG_001_ID AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID AND G.OPN_JOBLOG_006_ID = H.OPN_JOBLOG_006_ID AND H.OPN_JOBLOG_007_ID = F.OPN_JOBLOG_007_ID GROUP BY E.OPN_JOB_DESC,j.opn_value
-
Write a string and an integer and a table all in the same file?
Hello
I am currently it several different types of values with LabView.
I have a shot, a few numbers and several paintings.
Thus, for example, I have a timestamp of the chain, several values of "integer" amplitude of the signal for example, RMS value, frequency and I have several paintings - table of signal, the FFT (PIC and location) values.
Basically, I'm trying to find a way to write all the values in a single file. I can write all the individual types to separate files (so I can write the RMS, amplitude and frequency to a single file, some of the tables in the other)
but is it possible to write a string and an integer and a table all in the same file?Pointers would be much appreciated,
Thank you
Paula
Your file will be all text... any format in a table of text, to build as a single table, "table chain worksheet", to write to the file.
(I'm sure this has been on the forums before... a search it would have thrown upward)
-
Dynamically read the table name in the query update
Hi all
I am trying to run the updated sql query where the name of the table should be read dynamically from another table below.
Please let me what wrong with my request.
setting a day (select CONCAT('T',schemaid) from outline, which the name = 'Analyzer') set c7 = 99;
"outline" is a table that contains two columns name and schemaid.
all the table created in our database with the prefix 't' T4345 for example.
I did as suggested by you
No, you didn't. I did not any package creation code in my example, in order to better that you you point the finger.
Your syntax is invalid for creating a package with the code like this, please read on creating packages and procedures within them if that's what you want to do.
In addition, your package creation statement is to create a package specification, but you put in the code which must be in a package body, not a notebook loads.
It should be something like (untested since I don't have your tables)...
create or replace package my_packg as
procedure dowhatever.
end;
/create or replace package body my_packg as
dowhatever procedure is
TBL varchar2 (30);
Start
Select 't' | SchemaId
in tbl
of outline
where name = 'Analyzer ';
run immediately 'Update'. "TBL |' set c7 = 99;
end;
end my_packg;
/and then call this procedure by calling my_packg.dowhatever ();
-
For Timo: Dynamically create pivot table binding
Hi Timo,
Long time ago you have this announcement on a thread:
"The solution for your use a 2013 DOAG case, I presented was to create binding table pivot out user defined attributes in the table."
For the defined attributes, VO is created dynamically and the pivot link.
The pivot link is exchanged during execution as well as the activation of the adequate VO Dynamics to get only the
necessary data for the pivot table in particular.
......
I can't give you a working example because it is too complex. I can make available slides, but they are in German. "
We have the same problem.
Can you please send me this presentation on: email address removed by the moderator - there is no private through this public forum consultation >
I can't find this Presentation on the Internet.
Maybe, if you have some examples of simple work, too.
Kind regards
Diana
Diana, you can get the DOAG2013_DynamicPivotTable_virtual7 blades | JDev & ADF Goodies
The sample is too complex to be made available through my blog.
Timo
-
Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you
Oh dear. It turned into a terrible mess of a thread with opinions and advice. You do your layout with Word. In my experience, Word is a nightmare when it comes to positioning many areas of text and images.
You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file. But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen. Dows following?
How big are the pictures you used in Word? They probably didn't need to be very large, because each image is only an impression at a relatively small size.
First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF
It will keep the text in the form of scalable vector objects which allows printing at any size. However, I don't have the knowledge of how Word uses images. I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images. Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter. You need to do some research on it, because it might make you save a lot of time.
You have Publisher? Editor certainly reference the drive images, and friezer downsize to fit the page. I suspect that you can import a Word into Publisher document, which would put you best part of the way with it. I would like to test it, but I use it as a loyal user of Adobe InDesign. If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop. Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels. When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)
Good luck
-
Figure/table numbering in several files
Hey gang,
I have a book of multi-fichiers in FM 11 requires this page, the paragraph numbers, figure and table be sequential (3.1 - 1, 3.1 - 2, etc.) between the files. Issues page numbers and paragraph were fairly simple: Format > Document > numbering, continue the numbering from the previous chapter, to update the book and your Uncle Bob. Now, the numbering of the relevant paragraphs is the following:
H: < $chapnum >. < n + >. < = 0 > < = 0 > \t
The numbers in the figure and the table are more severe; using the following format
H:table (or digit) < $chapnum >. < n > <><>- < n + > \t
I can get the paragraph numbers to work, but the numbers individual figure/table restarts at 1 in each file. The problem is that there's nothing say FM to continue numbering the tables or figures in the previous file in the book, but I can't understand how do. Any ideas?
Kind regards
-terry-
These counters are considered paragraph numbering for purposes of prosecution for parts of the book.
The list of the usual suspects when it gets unexpectedly reset includes but is not limited to:
- Conflict between book and part of the dialing properties file
- Some rogue paragraph is using the same counter and reset.
-
What broadcast and Round Robin at the same time of the modes of distribution?
Hi all
as you know it some methods so that they were distributing data between consumer and producer of games. for ex: partition, hash, range...
If you use one order by statement at the same time a statement that you will probably see the range method because the sets of consumption creates a range of order the lines and every time an execution in parallel to producer (parallel) server wants to send a row, he look for parallel processes of consumer who has an appropriate range of selection.
but on the methods of dissemination and Round robin, I couldn't understand what they do and how to work Hey... I searched the documentation, but I couldn't find a document that explains their good. for ex if I write a select statement like this
then I can see alternating in the execution plan.select /*+ parallel(sales, 4) */ * from sh.sales union select * from sh.sales2
So what's "Broadcast" and what do do "Round robin".
Thanks a lot for the answers.
Edited by: elcaro on Sep 25, 2011 11:00in the method of Robin, a set of parallel processes to manage your data and process series send all data (she) up to the parallel treats each as a game of poker. in your example, manages the sales data in the table by the (process) parallel execution servers and sales2 table is managed by a process series (one).
disseminate the method, a line sends to all the processes of consumption.
-
The section and the TOC numbering
Asked me to convert a document into a pdf interactive (table of contents clickable, hyperlinks etc.).
They have formatted the document entirely by hand, no style or whatever it is. My problem is that they did not use page numbers but the numbering of the section. If their page numbers are:
1.1, 1.2, 1.3, 2.1, 2.2, 2.3, 2.4, 2.5, 3.1, etc..
I've sorted the automatic page numbering by making each article a proper section and restart the numbering at 1 in each section. On a master page, I have a text box that contains < Section marker > in the lower right corner. < current Page number >.
I called the sections 1, 2, 3, etc. without prefix.
It gives me 1.1, 1.2 etc. throughout the document. Problem is when I come to generate the table of contents, I get the correct page within the section number, but no article number before the page number.
How to:
Resins 1.1
1.2 of the applied
Email 1.3
Fonts 2.1
2.2 color
In the table of contents and not:
Resins 1
2 applied
Email 3
Fonts 1
2 color
I do this in CS3, because that's what society use. Any help would be most appreciated.
Thanks in advance.
Have you tried to go to your numbering and Section options, put in a Section prefix (for example, 1.), of checking then include prefix when numbering Pages.
Seems to work for OCD and automatic page numbering...
-
Gasoline and pivot table uses in OBIEE
Hello people,
Please help understand what PIVOTTABLE DYNAMIC and CALIBER in OBIEE answers
in what cases or scenario will be used for these things.
and what is the CASE in OBIEE, where it is used and what is its purpose.
Thanks in advance
JMsThe pivot table view is an interactive view which allows you to rotate the lines, columns and headers to get different perspectives of the data section. PivotTables is navigable and percables and is particularly useful for trend reports.
Gauges are useful to show the performance against objectives. Gauge types supported include dial and bar style light bulb gauges.
CASE statement is used for conditions, its use is the case when x = y end doubts... Its similar IF statement in programming.
-Madan
-
Dynamically create a table of contents
I'm having a problem dynamically create a table of contents (table of contents). I set up the table of contents in my template, but apparently not otherwise than he does until I run the report during execution. I feel that the TOC can be built dynamically, but I do not see how this works. Any thoughts?
Group of LINE by TABLE_NAME
TABLE-NAME
"The data in the table.
page breakend LINE of TABLE_NAME
Here are the results before and after execution:
Table of contents
TABLE_NAME...........................................................................................................................Hi Patrick,
Take a look at the email I sent.
Simply enter the domain name like and do not use the form for this field.
-
How to have a dynamic number of tables where new rows can be added
Hello
I'm new to ADF and have a task where I on a single page should I show that a dynamic number of tables and each table below should show some fields and create a button to create new lines in the table. To be more precise each table show an education for the individual and the rows of the table shows the meanders of specific education.
I thought to use a treetable but don't think it's the right way to go because of the new line add feature - I'm not sure of the combination of having a dynamic number of tables and the ability to create new lines of each table.
If you know where I can find a model similar to the one above or just give me your opinion on how to solve it, it would be much appreciated.
I get the data from a Web service.This is a small sample.
It could be improved for more information.
work for you?Class Education
public class {education
private string ID;
description of the private channel;
private list class ArrayList= new ();
Public Education() {}
}{} public void setId (String id)
This.ID = id;
}public String getId() {}
return the id;
}{} public void setDescription (description of the chain)
This.Description = description;
}public String getDescription() {}
return description;
}public void setCourses (list of courses of
) {}
This.courses = run;
}public
getCourses() {list
return of the course;
}
}classroom
public class {course
private string ID;
description of the private channel;
teaching of teaching private;
public Course() {}
}{} public void setId (String id)
This.ID = id;
}public String getId() {}
return the id;
}{} public void setDescription (description of the chain)
This.Description = description;
}public String getDescription() {}
return description;
}{} public void setEducation (education)
This.Education = education;
}Public Education getEducation() {}
return of education;
}
}
Managed Beanpublic class {Manage
private list of educations of;
selectedEducation of teaching private;
selectedCourse of course private;public Manage() {}
educations = new ArrayList ();
for (int x = 1; x)<= 10="" ;="" x++="" )="">=>
E education = new Education();
e.setId(""+x);
e.setDescription ("education" + x);
for (int i = 1; i)< 3;="">
Class c = new Course();
c.setId (e.getId () +'.) » + i) ;
c.setDescription (e.getDescription () +": courses"+ i);
e.getCourses () .add (c);
}
This.Educations.Add (e);
}}
public String actionAdd() {}
Add the code in the event here...
TODO invoke the web service proxy to add courses
Class c = new Course();
c.setId (this.selectedEducation.getId () +'.) (' + (this.selectedEducation.getCourses () .size () + 1));
c.setDescription (this.selectedEducation.getDescription () +": courses"(this.selectedEducation.getCourses () .size () + 1));
this.selectedEducation.getCourses () .add (c);
Returns a null value.
}public String actionQuit() {}
Add the code in the event here...
TODO invoke the proxy web service to stop the course of education
int index = this.selectedEducation.getCourses () .indexOf (this.selectedCourse);
this.selectedEducation.getCourses () .remove (index);
Returns a null value.
}
public void setEducations (list of educations) {}
This.Educations = educations;
}public
getEducations() {list
TODO invoke the web service proxy to get educations
return of the educations;
}{} public void setSelectedEducation (selectedEducation education)
this.selectedEducation = selectedEducation;
}Public Education getSelectedEducation() {}
Return selectedEducation;
}{} public void setSelectedCourse (course selectedCourse)
this.selectedCourse = selectedCourse;
}public class getSelectedCourse() {}
Return selectedCourse;
}
}JSPX
xmlns:h = "http://java.sun.com/jsf/html".
xmlns:f = "http://java.sun.com/jsf/core".
xmlns:afh = "http://xmlns.oracle.com/adf/faces/html".
xmlns:af = "http://xmlns.oracle.com/adf/faces" >
DOCTYPE system = "http://www.w3.org/TR/html4/loose.dtd".
doctype-public = ""-/ / W3C / / DTD HTML 4.01 Transitional / / IN "/ >"
Content = text/html"; charset = windows-1252 "/ >"
var value = "#{Education.courses}" = "course" rows = "5" "
strips = "row" bandingInterval = "1" >
to = "#{Manage.selectedEducation}" / >
to = "#{Manage.selectedEducation}" / >
to = "#{Manage.selectedCourse}" / >
faces config xml
"- //Sun Microsystems, Inc.//DTD JavaServer Faces 1.1 Config / / IN".
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd" >
manage
com.test.Manage
session
Oracle.ADF.Core
-
Transaction declined and last four numbers on the sheet, not the same as the card is in my wallet.
Hello
The latest figures, rare are the last four digits of your account number of device, not the last four digits of your credit card.
To see these numbers on your iPhone, go to: portfolio > tap to select this card > press the 'i' icon (bottom-right) > under the heading card, information the last few digits of your card number and your account number of the device.
The account number of the device is related to the unique combination of your credit card, pay more the device on which it has been added to Apple (IE an iPhone, iPad, or Apple Watch).
-
my account blocked and why phone numbers
my account blocked and why phone numbers
Please contact Skype customer service
TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest version of Skype: Windows & Mac
If my advice helped to solve your problem, please mark it as a solution to help others.
Please note that I usually do not respond to unsolicited private Messages. Thank you.
Maybe you are looking for
-
I can't open new tabs on the position of botton?
Hello. After the upgrade to v.7 v.5 Firefox can't open new tabs when on the bottom. In a page Web, in an area about an inch under the 'tabs' line does not work. Example: on the 'Help' of Firefox page I can't sign-in/register if I want to "contribute"
-
Virgin Media Hub 2ac and Netgear EX2700
Hi people, I'm pretty new to all this, I'm looking for some guideance all about my Netgear EX2700 to connect to my new Virgin 2ac Hub (just moved house) The EX2700 has been a joy to work with in recent years, until he was introduced to the Virgin Now
-
My router is not working. I have reset it. I tried reconfiguring, my computer could not get internet connection when I connect it to the router. I followed the instructions to turn off all power and then turn the cable connected to the router to the
-
XP Pro SP3 - C:\FOUND.001 file-"Access denied" trying to open the file
XP Pro SP3 instance reported corruption in the settings & Doc. Ran CHDKSK/f, then logon has not read the profile & given by default. C:\found.001 was visible during logging ADMIN & No. Removed the HD and mounted as external USB media to another PC
-
Proceed to the Vista recovery and repair USB
I'm doing a Vista recovery and repair request and place it on a USB key web solutions appear very complicated compared to windows 10 recovery and repair request. Thanking you in anticipation