Figure/table numbering in several files

Similar Questions

• Remove numbering from several files in a Briefcase Bates?

  I work as an intern for the Office of a lawyer and was loaded with aid Bates of Adobe Acrobat functionality of numbering to organize documents for a case, a lawyer is working on that. Unfortunately, I made a mistake and included an incorrect PostScript after the Bates numbers and need to remove Bates numbering over 1,000 documents. Flipping through the Acrobat manual, it seems that I should just be able to use the tools > Pages > Bates numbering > remove and then a dialog box should appear allowing me to delete several files both the numbering, however, Bates instead, Bates numbering is simply deleted from the document I opened, forcing me to having to open each document individually and remove Bates numbering. How to remedy this, whether this project is on a strict timetable?

  If you have Acrobat Pro create a new Action (via Tools - Action Assistant) with the command delete numbering Bates and a Save command and then run on your files.

• Book of 10 with several files frame crashing when I change the numbering at the level of the book.

  I built a picture book (image 10) with several files from a variety of books. The files have inlays of text and references to breast and between chapters. When I go to set the numbering at the level of the book - as soon as I click on the Numbering dialog box Set - Framework breaks down and I get an internal error 10024, 6382424, 6369627, 6383085. I have attached a screenshot.

  I take the files on the book and added back in. These files worked fine in the original books, that I copied them from. I can't get the book to number correctly. Help, please.

  Hi, Estelle,.

  Don't know if this is relevant to what you are feeling, but...

  I've encountered similar problems of numbering with several of my books.

  What fixed it finally for me, is that I discovered that some files were overrides of paragraph style (not necessarily related to positions or section heads.

  Once I removed all replacements of these files, numbering issues have been resolved.

  While I use the plugin Tools section , you can scan your files for the substitutions with built-in FM find/replace.

  Kind regards

  Amitai Sela

  Philips Healthcare

• Automation of table and the Figure of numbering

  I have a large document with many figures and tables that get deleted/added or just change anywhere in the document under review.  It is also necessary to have a sentence in the text referring to the table/figure.  My question: is it possible to make the automated table/numbers so I mustn't keep renumbering them and this corresponds, as they move?

  I have checked forums and books of reference, but have not been able to find something about it.  Has anyone experience this problem?  If yes how did you work it?

  Thanks for the help!

  Melanie

  You must define separate lists for tables and figures. Detailed instructions are here:

  http://blogs.Adobe.com/indesigndocs/2009/04/numbered_lists_part_iii_figure.html

• Saving information from several tables in a txt file

  To all,

  I work in a defined test bed in which I test different devices via series. For each one, I have a table of newspaper. Is there a way I could connect all these tables in a text file of monkey?

  Thank you

  Cosmica

  Of course it is a. have you looked through the functions in the range of the file IO? For example, writing to the spreadsheet file or as file write, according to the format of your data.

• I use numbers to make files, but other people could not open, why?

  I use numbers to make files, but other people could not open, why?

  Hi Annie,.

  Only numbers can open a document in numbers. Excel cannot.

  In addition, there are several versions of numbers that work on a Mac. Older versions will be not open newer versions.

  What version of numbers do you run?

  What applications are the other people running?

  If other people are running Excel, you can export your document numbers to Excel (Menu > file > export to... > Excel). The export will not be perfect, but they will be able to open it and read it.

  More information, will lead to a solution.

  Kind regards

  Ian.

• write 1 d digital table in a binary file and start a new line or insert a separator for each loop writing file

  Hello:

  I'm fighting with digital table of 1 d writeing in a binary file and start a new line or insert a separator for each loop writing file. So for each loop, it runs, LABVIEW code will collect a table 1 d with 253 pieces of a spectrometer. When I write these tables in the binay file and the following stack just after the previous table (I used MATLAB read binary file). However whenever if there is missing data point, the entire table is shifted. So I would save that table 1-d to N - D array and N is how many times the loop executes.

  I'm not very familiar with how write binary IO files works? Can anyone help figure this? I tried to use the file position, but this feature is only for writing string to Bodet. But I really want to write 1 d digital table in N - D array. How can I do that.

  Thanks in advance

  lawsberry_pi wrote:

  So, how can I not do the addition of a length at the beginning of each entry? Is it possible to do?

  On top of the binary file write is a Boolean entry called ' Prepend/chain on size table (T) '.  It is default to TRUE.  Set it to false.

  Also, be aware that Matlab like Little Endian in LabVIEW by default Big Endian.  If you probably set your "endianness" on writing binary file as well.

• Help to extract data Clob to a column in a table that has several lines in a table

  Help to extract data Clob to a column in a table that has several lines in a table

  It works for only the first line

  CREATE or REPLACE DIRECTORY XMLDIR AS ' / orabackups';

  Grant read, write on DIRECTORY XMLDIR to the public;

  () dbms_xslprocessor.clob2file

  beef in CLOB,

  XMLDIR IN VARCHAR2,

  "testfile2.txt" IN VARCHAR2);

  DECLARE

  buf CLOB.

  BEGIN

  SELECT H15_DOC

  IN buf

  OF H15TEST. H15_STAGE

  where rownum = 1;

  dbms_xslprocessor.clob2file (buf, 'XMLDIR', 'testfile2.txt');

  END;

  /

  -This error code

  CREATE or REPLACE DIRECTORY XMLDIR AS ' / orabackups';

  Grant read, write on DIRECTORY XMLDIR to the public;

  () dbms_xslprocessor.clob2file

  XData in CLOB,

  XMLDIR IN VARCHAR2,

  "testfile2.txt" IN VARCHAR2,

  CSID in NUMBER: = 0);

  DECLARE

  CURSOR xmlmycur IS SELECT H15_DOC

  OF H15TEST. H15_STAGE

  where rownum = 102140;

  l_clob CLOB.

  XData CLOB.

  BEGIN

  DBMS_LOB.CREATETEMPORARY (l_clob, true);

  DBMS_LOB.CREATETEMPORARY (xdata, true);

  OPEN xmlmycur.

  LOOP

  SEEK xmlmycur INTO xdata;

  dbms_xslprocessor.clob2file (xdata, 'XMLDIR', 'testfile2.txt');

  EXIT WHEN xmlmycur % notfound;

  END LOOP;

  CLOSE Xmlmycur;

  END;

  /

  ORA-21560: 3 argument is null, invalid or out of range

  ORA-06512: at "SYS." DBMS_LOB", line 991

  ORA-06512: at "XDB". DBMS_XSLPROCESSOR', line 324

  ORA-06512: at line 15 level

  FYI, it seems that the file being created will exceed 5 gig

  Yes, it is a known issue with DBMS_XSLPROCESSOR.clob2file with big files.

  Here is a slightly modified version of the code that I posted earlier, fixing WRITE_ERROR except:

  DECLARE

  v_file utl_file.file_type;

  -write a unique to clob

  procedure write_clob (p_content in clob) is

  v_buffer varchar2 (32767).

  V_POSITION pls_integer: = 1;

  v_amount pls_integer: = 32767;

  Start

  loop

  Start

  DBMS_LOB. Read (p_content, v_amount, v_position, v_buffer);

  exception

  When no_data_found then exit;

  end;

  UTL_FILE.put_raw (v_file, utl_raw.cast_to_raw (v_buffer), true);

  V_POSITION: = v_position + v_amount;

  end loop;

  end;

  BEGIN

  -Open the file

  v_file: = utl_file.fopen ('TEST_DIR', 'testfile2.txt', 'wb', 32767);

  -loops through the lines

  for r in)

  Select h15_doc

  of h15test.h15_stage

  )

  loop

  write_clob (r.h15_doc);

  end loop;

  UTL_FILE.fclose (v_file);

  END;

  /

• FM crashing when it formats import / closes several files in a book

  FM hangs EVERY time it closes several files. I first noticed this problem when I tried to import the formats through all the files in a book. It would work for less than 10 seconds, and then it will disappear. My theory is that the accident occurred at each closing several files FMis and it makes sense (to me) because it seems that FM opens and closes each document in a book when the formats are imported in all of the files in a book.

  I first noticed this crash once I had changed several settings in an existing address to change the way the pages are numbered in all of the work (management wanted to change to a 'constant' numbering system from the first to the last page of the book to a relative numbering system where numbering begins with each chapter). I do not remember the specific changes I made when I got this crash, but this accident has been constant since this point.

  It is played like this...

  1. I select all the files in a book and select file/import/Formats.

  2. I click on apply, then I can get a few 'cannot Ωtre annulΘe' alerts regarding the undo history.

  3. then the accident occurred and I get the following alert from Windows...

  

  4. my solution was to open all the files in the book and then import formats. This does not create an accident; HOWEVER, the same accident will happen if I try to close all open at the same time by selecting files, right-click and choosing Close.

  5. it's really impact my workflow because the only other workaround to avoid a crash is to close each file separately, and it's extremely frustrating, especially when I'm dealing with a book that contains 60 files.

  I am a relatively new user, and I'm certainly not the more technical user in this forum. I use Windows 7 and FM 11.01.382. I searched on the internet several times and I have not found this topic, and I'm sorry if this is covered elsewhere.

  Thanks for any help!

  Instead of selecting all the files in the book, have you used them open all the files, options, save all files and close all files at the level of the book? In the book file, just hold down the SHIFT key before clicking on the option of the file menu and you should see the options "All".

• Is automatic and Table numbering in the Document to multiple sections

  I want to set up automatic figure and table numbering that includes a reference to the current section number. (Figure 2-1 = the first figure in article 2; Table 3-2 = the second table in Section 3). I understand how to do this with styles if I had to work with a collection of documents with defined chapters. How can I do this in a single document with a number of defined in section?

  Is the only way to define the styles in the list for my items?

  I'm afraid you're right. You can include the numbering of the chapters in style with the numbered list, but you cannot include section prefixes. I think that you will have to use the method you suggested.

• Reading several files / locate the data source during execution

  Hi all
  
  I have a requirement of the company in which I need to read files to different folders. This system is not hosting the ODI agent. There are two folders, the folder A and folder b. Two records may have any number of files. My intention is to read the files in a folder and write the data to a table in a database that resides in another system. This forms a flow for me. For the B folder, I have a similar flow. All files (in the folder A and folder B) have the same structure. The requirement is to read A book during the week and the B folder on the weekend. The system that has the database also runs the ODI agent.
  
  Here are my questions:
  
  1. How can I read several files one by one in a folder? Because the read files must be archived, they need to be written in a different folder, file C (for example). How do you archive part? Please note that this machine does not run ODI agent (network share could be an option, but we try to avoid it.
  
  2. can I have only an interface to read files in folder A and folder B? Everything else remains the same (the processing logic/transformations etc.). Indeed, is there a way to dynamically switch between two files (using a variable, perhaps).
  
  I've not worked with files and so any help is greatly appreciated.
  
  Edited by: Sankash 7 May 2009 08:24

  Hi Sankash,

  Hopefully I can help you achieve this task.

  Please go through this link

  Re: import files in a table

  1. you can update the status of the process of the files in a journal/temp table.
  Based on the State of the (transformed) file in the table, you can check the files that has completed its process correctly.

  machine does not run ODI agent:-J' have it is implemented the same type of scenario, in which I am downlading all the files in a common location and treat it from there.

  2. one of the solutions is that: -.

  create two interface with the same structure, but the source table must point to the folder A and B
  Create a variable (week/check) and based on the value, you can call the interfaces.

  second option: -.

  If you're downlaoding the files in a common location, you can reach the spot through a single interface (down load files from folder A or B according to in week/weelend)

  3. If all the files have the same structure, you need only a data store and it should be a variable data store.

  If something is not not clear please me ping / mail to my id (good that now I don't get enough time to go through the forum discussions)

  Also if you need I can send you a diagram wokflow for this loop (read multiple files one by one in a folder)

  Kind regards
  Pascale of M

• Y at - it a safe application for concatenating several files into one .rtf?

  Y at - it a safe application for concatenating several files into one .rtf?

  Why do you do this?

  Is it arril (3D image files) or .rtf (Rich Text Format) files?

• Highlight one several files at the same time

  I would like to highlight several files to delete at the same time. Through Windows highlight you or click on the first file with the mouse and click on the last file and everything in-between becomes highlighted for deletion. Is there a way to do the same thing with my Mac without clicking on each file individually?

  OS X does not have an iota of code Microsoft Windows. Do not expect that it works in the same way.

  1. You have the choice on OS X. You can click and drag the file icons that you want to remove, then right-click on one of them and select move to trash.
  2. You can select the first icon in the file and then pressing the SHIFT key or order, select the following icons. Then click on any place in the trash.
  3. Step 2, but using the arrow keys for the selection of additional directional file icon.
  4. Combine [1, 2, 3] to add or subtract icons from file.

• Rec'd dropbox to the message with a photo of the friend doc. Such notice, thought has been expanding doc, immediately went to the zip file downloads. Open the folder several files, open 1, did not open the funny code file. I'm ok, anyone who sent hacked.

  Received email claimed friend which contained dropbox. In dropbox was the photo of the small document and note to friend. (I wasn't familiar with dropbox). The document had seen listed by it. I clicked on see thinking I was enlarging document to read what it was. A folder of zip file immediately went to the download. I opened the case and he had several files listed, suspicious code. One who does not I opened. The person called and they said that their e-mail had been hacked. Someone had mentioned to them that it would be Zeus. Although I have downloaded zip file and open a folder which looked ok, and I did not open the file with the code of suspicion. I agree with you?

  I agree with you?

  Yes. Just delete the files and the message.

• Insert quickly slides of several files

  I have been using PowerPoint for many years, but now I want to change my speech.  On PowerPoint, there is a feature where I can "insert slides from file".  I have often used this function to insert the files (database of song lyrics) quickly to form a unique presentation with special songs, I need on a given day.

  I would like to know if there is a similar feature on Keynote, or if there is another way I can insert quickly from the files of a database to compile a unique presentation.

  It would be much too tedious open individual database files, select all of the slides, drag them into the new format, and then close each file database.

  Any help would be greatly appreciated.  Thank you!

  If there is another way I can insert quickly from the files of a database to compile a unique presentation.

  Only databases Keynote can access media import files are iTunes and PHOTOS.

  Insert quickly slides of several files

  Keynote can directly move the media to a folder if they are graphic compatible QuickTime video and audio.  Drag and drop pictures on the Panel of the browser, it is located on the left side of the slide canvas.

  We can quote:

  video; MPEG4 H264

  audio; AIFF mp3

  graphics card; TIFF JPEG PNG PCT