Dynamic assignment of the NAC to the same vlan came on and off strip

Hello

Pls forgive my ignorance, I'm fresh in the biz of the NAC.

I have a requirement for a client, very large high rising with numerous hospital, they want to assign MDs to the same vlan, if he or she uses the Office at out clinic, which would be OOB Layer 3, and even he or she uses the Tablet PC/PDA wireless during the round room.

The question is whether this is something achievable. A little trick how to do it would be very useful.

Appreciate your expertise.

Thank you

Saami

By user role VLAN can be activated for OOB.

The VIRTUAL LAN is configured on the role and setting up OOB, there is a check box that you need to activate so that the user receives the vlan configured on the role (I don't remember the exact section now..).

With that, whenever a user who belongs to a specific role connects, he will receive the same VLAN according to what is set up on its role.

I hope this helps.

Tags: Cisco Security

Similar Questions

  • Static text is much better than the dynamic text with the same font settings

    Hello

    I have exactly the same parameters for static and dynamic text, but the static text seems much sharper. Someone knows why?

    Police: Trebuchet MS

    Size: 30 pt

    Anti-alias for readability

    There is a slight difference, but I would not say much better. Incorporate you the dynamic text characters.

  • 2 SSID on the same Vlan?

    Hi all -

    Newbie question. When I set up wireless, I'll be able to use 2 different SSID on the same vlan?

    Example:

    dot11 ssid example1

    VLAN 2

    authentication open eap eap_methods

    authentication network eap eap_methods

    dot11 ssid example2

    VLAN 2

    open authentication eap_methods

    authentication network eap eap_methods

    Hi James,

    I hope that the attached material will answer your question:

    Cisco Aironet 1100 series

    Using VLANs with Cisco Aironet Wireless Equipment

    Obsolete versions of software Cisco Aironet permit binding multiple SSID to a VLAN. The current versions are not.

    http://www.Cisco.com/en/us/Products/HW/Wireless/ps4570/products_configuration_example09186a00801d0815.shtml#.

    Configuration Guide for Cisco IOS software for Points of access Cisco Aironet, 12.2 (15) JA

    Multiple SSID configuration

    VLAN id - vlan

    (Optional) Assign the SSID to a VLAN in your network. Client devices that associate using the SSID are grouped in this VLAN. You can assign one SSID to a VLAN.

    http://www.Cisco.com/en/us/products/HW/wireless/ps4570/products_configuration_guide_chapter09186a00802085c4.html

    I hope this helps!

    Rob

    Remember messages useful rate...

  • Assignment of the task to its users and groups

    Hi Experts,

    We have a requirement for the assignment of the task to its users and groups. What are the different options we have to achieve this goal.

    (1) considers that I have 6 groups, 6 groups, I need to take a group and itinerary of the task to a dynamic group.

    Each group contains also 15 users when a task is routed to the Group A then all users in Group A should get the job. How can I achieve this. Can u send me please step by step procedure.

    We use Jdev 11.1.1.6

    (2) I have confusion about the roles of Parametic what exactly it is? And what is the difference between parametric and Management Chain.

    Thanks in advance.

    Pavan

    Dan, thank you so much for the post and the explanation...

    But today, I just mention its only 6 groups... but if the groups continues to increase as groups of 100 or more so how can we achieve...

    Kind regards

    Pavan

  • Look for the same combination of parent and child

    Hi all I am using oracle 10g. can you please help me in this issue.
    How can I know if the same combination of filiation in the table

    key to value and value are values given by the user.
    If the user tries to create a profile even with the same set of key_value and value while avoid
    So how do you achieve this.


    Profile example already in the table
    ----------------------------------------------------------------------
    -- PROFILE_ID,DETAIL_ID,PARENT_DETAIL_ID,KEY_VALUE, VALUE, LAST_IND
100,               1,               NULL,                      1,              CDE,     N
100,               2,              1,                            2,              XXX,     N
100,               3,              1,                            2,              YYY,    N
100,               4,              1,                            4,              NEW,    Y
    new user profile - it should raise an error saying that same profile already present
    -- PROFILE_ID,DETAIL_ID,PARENT_DETAIL_ID,KEY_VALUE,VALUE,LAST_IND
101,               5,               NULL,                      1,              CDE,    N
101,               6,              5,                            2,              XXX,    N
101,               7,              5,                            2,              YYY,    N
101,               8,              5,                            4,              NEW,    Y
    Published by: DeepakDevarapalli on December 9, 2009 09:48

    Published by: DeepakDevarapalli on December 9, 2009 09:59

    Hello

    Rather than separate subqueries to get target_ptxt and staging_ptxt, it is easier to combine the target and the staging in a UNION, then calculate the ptxt once, unified data. To mark the staging data, I assigned profile - 1, assuming it wasn't a number real profile.

    The following query calculates ptxt for each profile, including the profile =-1 (staging).
    It then compares the ptxt transit zone to all other ptxts and identifies each one that matches.
    If the query does not have all the lines, then staging did not match any profile existing in tagrget.

    WITH       union_data     AS
(
     SELECT     profile
     ,     key
     ,     value
     FROM     target
          --
     UNION ALL
             --
     SELECT     -1     AS profile
     ,     key
     ,     value
     FROM     staging
)
,     got_r    AS
(
     SELECT       profile
     ,       key || '/' || value               AS rtxt
     ,       ROW_NUMBER () OVER ( PARTITION BY  profile
                                  ORDER BY         key
                           ,              value
                         )                      AS rnum
     FROM       union_data
)
,     got_p     AS
(
     SELECT     profile
     ,     SYS_CONNECT_BY_PATH (rtxt, ',')     AS ptxt
     FROM     got_r
     WHERE       CONNECT_BY_ISLEAF     = 1
     START WITH     rnum          = 1
     CONNECT BY     rnum          = PRIOR rnum + 1
          AND     profile          = PRIOR profile
)
SELECT    'Profile Already Present'     AS warning
,       t.profile
FROM       got_p          s
JOIN       got_p          t     ON     s.ptxt     = t.ptxt
WHERE       s.profile     =  -1
AND       t.profile     != -1
;

  • How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

    Switch issues. Help, please.

    How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

    Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

    -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
    -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
    -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

    Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

    It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

    To save the manual copy and the new hits of the ipconfig/all command output-

    First connect through switch.
    Open a command prompt window (start > run > cmd > OK)
    Type the following lines in the black command prompt window and press ENTER after each line

    echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
    ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

    Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

    echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
    ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
    Notepad '% UserProfile%\Desktop\ipinfo.txt '.
    output

    Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

    You can delete ipinfo.txt on the desktop when you are finished.

  • Error 0x800CCC0F Outlook Express can duplicate the same messages from yesterday, and I can't delete them.

    Original title: outlook can duplicate the same messages from yesterday, and I can't delete them.

    I use outlook express for my e-mail yesterday same emails keep coming, I tried to remove them, but can't everytime I open outlook I get the same


    The other post:
    I opened outlook express the same messages from yesterday, continue to repeat every time error 0x800CCC0F had no new messages and I can't delete these messages

    Hi glendamcmillan,

    You did it all change hardware or software on your computer before this problem?

    You can follow this link & check if the problem persists:

    Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

    Hope the helps of information.

  • I get the same files repeat KB and how to stop it?

    I get the same files repeat KB and how to stop it?

    The KB record number are KB2478663 and KB2518870.

    Mike

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/how-to-stop-the-KB-file-from-keeping-repeating-to/21fb21b2-9a13-4261-9c1a-e7ef90a9e6a0

  • Cannot ping hosts on the same vlan on the 2 switches.

    Hey guys so I create my own network in Packet Tracer 6.3. While the hosts can ping others on the same switch 2960 and VLAN, they are unable to ping a host on another switch in the same VLAN. For example. Josh PC on S1 (192.168.10.10) cannot ping PC Doge on S2 (192.168.10.13). I'm sure that they are on the same subnet, so I thing it is a problem of junction...

    S1:

    S1 #show ip int br

    Interface IP-Address OK? Method State Protocol

    FastEthernet0/1 unassigned YES manual up up

    FastEthernet0/2 unassigned YES manual up up

    FastEthernet0/3 unassigned YES manual up up

    FastEthernet0/4 unassigned YES manual up up

    FastEthernet0/5 unassigned YES manual administratively down down

    FastEthernet0/6 unassigned YES manual administratively down down

    FastEthernet0/7 unassigned YES manual administratively down down

    FastEthernet0/8 unassigned YES manual administratively down down

    FastEthernet0/9 unassigned YES manual administratively down down

    FastEthernet0/10 unassigned YES manual administratively down down

    FastEthernet0/11 unassigned YES manual administratively down down

    FastEthernet0/12 unassigned YES manual administratively down down

    FastEthernet0/13 unassigned YES manual administratively down down

    FastEthernet0/14 unassigned YES manual administratively down down

    FastEthernet0/15 unassigned YES manual administratively down down

    FastEthernet0/16 unassigned YES manual administratively down down

    FastEthernet0/17 unassigned YES manual administratively down down

    FastEthernet0/18 unassigned YES manual administratively down down

    FastEthernet0/19 unassigned YES manual administratively down down

    FastEthernet0/20 unassigned YES manual administratively down down

    FastEthernet0/21 unassigned YES manual administratively down down

    FastEthernet0/22 unassigned YES manual administratively down down

    FastEthernet0/23 unassigned YES manual administratively down down

    FastEthernet0/24 unassigned YES manual administratively down down

    GigabitEthernet0/1 unassigned YES manual down down

    GigabitEthernet0/2 unassigned YES manual down down

    Vlan1 unassigned YES manual administratively down down

    Vlan2 unassigned YES manual downwards upwards

    Vlan10 unassigned YES manual up up

    S1 #show interface f0/1 switchport

    Name: Fa0/1

    Switchport: enabled

    Administrative mode: trunk

    Operational mode: trunk

    Encapsulation of administrative circuits: dot1q

    Operational Trunking encapsulation: dot1q

    Trunking negotiation: Off

    The VIRTUAL LAN access mode: (default) 1

    Native mode VLAN Trunking: 2 (native)

    The voice of VLAN: no

    Private-vlan host association Directors: no

    Mapping of private - vlan management: no

    Private-vlan trunk administration VLAN native: no

    Private - vlan administration trunk encapsulation: dot1q

    Private-vlan trunk administration VLAN normal: no

    Private-vlan trunk administration private VLAN: no

    Private-vlan operational: no

    VLAN Trunking enabled: ALL

    Pruning VLANS enabled: 2-1001

    Capture Mode disabled

    Capture VLAN allowed: ALL

    Protected: false

    The unit trust: no

    S1 #show vlan br

    Ports of status for the name of VLAN

    ---- -------------------------------- --------- -------------------------------

    1 by default active Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    FA0/13, Fa0/14, Fa0/15, Fa0/16

    FA0/17, Fa0/18, Fa0/19, Fa0/20

    FA0/21, Fa0/22, Fa0/23 and Fa0/24

    Gig0/1, Gig0/2

    2 active native

    5 active

    10 active VLAN0010 Fa0/2, Fa0/3, Fa0/4

    active by default fddi 1002

    assets of token-ring-default 1003

    1004 fddinet - default active

    1005 trnet - default active

    Trunk interface #show S1

    VLAN Mode Encapsulation native port State

    FA0/1 on 802. 1 trunking q 2

    Port VLAN allowed on trunk

    5,10,20 FA0/1

    Port VLAN authorized and active in the field of management

    FA0/1 5,10

    VLAN port extending on transmission State and no tree pruned

    FA0/1 5,10

    S1 #show mac-address-table

    Mac address table

    -------------------------------------------

    VLAN Mac Address Type Ports

    ---- ----------- -------- -----

    5 00d0.d37a.ed01 DYNAMICS Fa0/1

    S2:

    S2 #show ip int br

    Interface IP-Address OK? Method State Protocol

    FastEthernet0/1 unassigned YES manual up up

    FastEthernet0/2 unassigned YES manual up up

    FastEthernet0/3 unassigned YES manual up up

    FastEthernet0/4 unassigned YES manual up up

    FastEthernet0/5 unassigned YES manual administratively down down

    FastEthernet0/6 unassigned YES manual administratively down down

    FastEthernet0/7 unassigned YES manual administratively down down

    FastEthernet0/8 unassigned YES manual administratively down down

    FastEthernet0/9 unassigned YES manual administratively down down

    FastEthernet0/10 unassigned YES manual administratively down down

    FastEthernet0/11 unassigned YES manual administratively down down

    FastEthernet0/12 unassigned YES manual administratively down down

    FastEthernet0/13 unassigned YES manual administratively down down

    FastEthernet0/14 unassigned YES manual administratively down down

    FastEthernet0/15 unassigned YES manual administratively down down

    FastEthernet0/16 unassigned YES manual administratively down down

    FastEthernet0/17 unassigned YES manual administratively down down

    FastEthernet0/18 unassigned YES manual administratively down down

    FastEthernet0/19 unassigned YES manual administratively down down

    FastEthernet0/20 unassigned YES manual administratively down down

    FastEthernet0/21 unassigned YES manual administratively down down

    FastEthernet0/22 unassigned YES manual administratively down down

    FastEthernet0/23 unassigned YES manual administratively down down

    FastEthernet0/24 unassigned YES manual administratively down down

    GigabitEthernet0/1 unassigned YES manual down down

    GigabitEthernet0/2 unassigned YES manual down down

    Vlan1 unassigned YES manual administratively down down

    Vlan2 unassigned YES manual downwards upwards

    Vlan5 unassigned YES manual up up

    Vlan10 unassigned YES manual up up

    Vlan20 unassigned YES manual up up

    Vlan99 unassigned YES manual administratively down down

    S2 #show interface f0/1 switchport

    Name: Fa0/1

    Switchport: enabled

    Administrative mode: trunk

    Operational mode: trunk

    Encapsulation of administrative circuits: dot1q

    Operational Trunking encapsulation: dot1q

    Trunking negotiation: on

    The VIRTUAL LAN access mode: (default) 1

    Native mode VLAN Trunking: 2 (native)

    The voice of VLAN: no

    Private-vlan host association Directors: no

    Mapping of private - vlan management: no

    Private-vlan trunk administration VLAN native: no

    Private - vlan administration trunk encapsulation: dot1q

    Private-vlan trunk administration VLAN normal: no

    Private-vlan trunk administration private VLAN: no

    Private-vlan operational: no

    VLAN Trunking enabled: ALL

    Pruning VLANS enabled: 2-1001

    Capture Mode disabled

    Capture VLAN allowed: ALL

    Protected: false

    The unit trust: no

    S2 #show vlan br

    Ports of status for the name of VLAN

    ---- -------------------------------- --------- -------------------------------

    1 by default active Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    FA0/13, Fa0/14, Fa0/15, Fa0/16

    FA0/17, Fa0/18, Fa0/19, Fa0/20

    FA0/21, Fa0/22, Fa0/23 and Fa0/24

    Gig0/1, Gig0/2

    2 active native

    5 active

    10 VLAN0010 active Fa0/4

    20 VLAN0020 active Fa0/2, Fa0/3

    active by default fddi 1002

    assets of token-ring-default 1003

    1004 fddinet - default active

    1005 trnet - default active

    S2 #show mac-address-table

    Mac address table

    -------------------------------------------

    VLAN Mac Address Type Ports

    ---- ----------- -------- -----

    2 0030.f2c1.94e5 STATIC Fa0/1

    2 0060.5c83.3401 STATIC Fa0/1

    10 0002.4ae9.6964 STATIC Fa0/4

    10 0060.5c83.3401 STATIC Fa0/1

    20 0009.7c9a.a134 STATIC Fa0/2

    ----------------------------------------------------------------------------------

    Let me know what I missed here. All connections are made with a straight through cable.

    See you soon

    Josh

    Try to remove the S2 switchport port-security:

    interface FastEthernet0/1
 no switchport port-security

  • Tagged management VLAN and the virtual machines on the same VLAN

    I'm faced with a problem related to our Brocade switches newly acquired and get the private VLAN to work on trunk connections to our ESX servers.  Every time I try something different, he creates a new problem.

    In our configuration, our management of VLAN is not tag and we have a VLAN for this management network that is placed on our switches VLAN no marked native.  We also have virtual machines hosted on those same ESX servers that are on the same VLAN and everything works fine.  However, when I change the ESX management to carry a label on this VLAN and change the switchports accordingly (IE no untagged VLAN native), management work, but hosted on the ESX Server machines that are on the same VLAN can get no network connectivity.

    Is it possible to have a management network labeled and also the host of virtual machines on the same VLAN or is it totally impossible?  I'm not very familiar with networking behind ESX, so I apologize if this is a dumb question with an obvious answer.

    Thank you

    Mark J.

    Is it possible to have a management network labeled and also the host of virtual machines on the same VLAN or is it totally impossible?

    Yes, it is possible... why it doesn't work for you I don't know, but try the following:

    1. set up the Group of ports of VMS to use VLAN;

    2 configure the interface of management VMkernel port group use VLAN;

    3 configure the physical switch port to allow to this VLAN and put the default VLAN natively for these interfaces.

  • Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

    Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

    Hello

    Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

    Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

    Thank you

  • network stream between 2 virtual machines in the same vlan and host using DVS

    Hi experts, so 2 virtual machines on the same vlan / subnet and on the same esxi host using VDS need to talk to each other, that they get switched by the VDS internally or they headed north for network switches and come back?

    Welcome to the community - it will stay internal to the ESXi host.

  • Creative cloud says that he's broken and says that I have to download and (re) install to fix it. I'm doing this, and he said that must be creative to be downloaded cloud and (re) installed. I do it it says the same thing. On and on. What's wrong?

    Creative cloud says that he's broken and says that I have to download and (re) install to fix it. I'm doing this, and he said that must be creative to be downloaded cloud and (re) installed. I do it it says the same thing. On and on. What's wrong? Any difficulty?

    See the link below:

    https://forums.Adobe.com/thread/1858669

  • How to export data to excel that has 2 tables with the same number of columns and the column names?

    Hi everyone, yet once landed upward with a problem.

    After trying many things to myself, finally decided to post here...

    I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

    It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

    Because the tables have the same number of columns and the columns names.

    Here are the 2 tables with column names:

    Table-1 (MONTHLY_PART_1) Table-2 (MONTHLY_PART_2)
    SL_NOSL_NO
    MODELMODEL
    END_DATEEND_DATE
    U-1U-1
    U-2U-2
    U-4U-4
    ..................
    ..................
    U-20U-20
    U-25U-25

    Given that the tables have the same column names, I get the following error :

    402 error at line 103, column 4

    required aliases in the SELECT list of the slider to avoid duplicate column names.

    So how to export data to excel that has 2 tables with the same number of columns and the column names?

    Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

    Help me with this please.

    Thank you.

    Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

    see you soon

  • Install ESXi on the same VLAN as VM traffic

    I know it is advisable to separate your network management, but in this case we do not have a VLAN additional to devote to this.

    What to look out for when you use the same VLAN to install ESXi (network management) like some of my virtual machines?

    Also, I downloaded ESXi installable 4.1; I still need the local disks on my correct server install?

    The reason of VLAN in your example would be more for safety. Using a separate physical NIC for different traffic (management, vmotion, etc.) is more about performance, although a separate network offers security. If all goes well in your network design, you create a secure network that isolates the management and storage of regular network traffic traffic.

    ESXi can be installed directly on a USB flash drive. It's a support install destination from the installation CD.

Maybe you are looking for

  • Can't download apps over 3 G

    Interesting question since the update. I noticed apps to only update or download in 3 G. Someone else? Any tips? Thank you

  • Saving raw data with PCI-6259

    I think registration of raw data because the resolution max of 16-bit card and DAQmx Read gives me a 64-bit (converted to 32-bit) value. It's the waste of hard drive space. However, I couldn't find any information on the format of the raw data of thi

  • Question about DHCP on WRT54G

    Hi all: Could I use DHCP for wireless connection and assign IP private for PC for connection wiring? It will come into conflict with each other? Best regards Chen min

  • HP Photosmart Premium C310 series will not power

    Printer hp photosmart premium C310 went offline and will not print. Usiing Window 7 64-bit OS. Had no problems until I tried to print the other day and a message came saying printer has been disconnected. I tried printer, computer and router wireless

  • How to install a Dell Vista computer creative webcam

    I am trying to install a creative to my Dell webcam, can anyone help? I am tryin to install a webcam to my Dell com. creative, but I'm missing and disks that can go with it. Is there another way to access the info, I might need out of internet?