dynamic test license fails in submitting the application

Similar Questions

• Lightroom 6 license perpetual error 0xc00007b - the application failed to start properly

  Hello

  I installed 6 Lightroom on my laptop (perpetual license, no cc, machine is a dell win 7 64 bit, Intel core I7, 32 MB memory processor). No problem to install.

  I can't run the program. The message "the application failed to start Oxc00007b - click ok to close.»

  I spent hours searching the Internet for a solution. No way at the moment. Of course, I uninstalled, reinstalled and so on.

  I copied the DLL as suggested in the post from adobe (error: "unable to start correctly (0Xc000007b)")

  I did a windows repair using the microsoft web site

  All other applications work without a problem, including lightroom 5.7 and photoshop CS5

  I have not uninstalled visual c ++ libraries, ignoring it to other uses of the application which version of C++

  I'm stuck with my problem. Could someone help?

  Hi Benoit,.

  In the end, I completely reinstalled Windows 10 and it works perfectly fine. So this is a windows problem

  Thank you for all

  Jean-Paul

• TestStand fails to use the application with custom user settings

  Hello

  For a project of teststand, I use a .net application that uses a custom settings provider. The problem is that whenever he tries to use one of the teststand user settings, the application returns an exception:

  "Unable to load the provider type.

  I tried to illustrate the small demo project that I have attached.

  The .net application I call of test bench is AppWithUserSetting, and is one of the steps in the q.seq file in sequence to get a value from a user setting. That's where it crashes for me.

  On the other hand, if I instantiate the same objects and read the same setting from another application .net (DoLikeTestStandApp), everything is fine.

  Note that in the AppWithUserSetting settings.designer.cs file, a custom line has been added ([total:ystem.]) Configuration.SettingsProvider (typeof (AppWithUserSettings.UserAppSettingsProvider))]) to force the program to use the custom SettingProvider. And that's where it fails when loading teststand.

  No idea why? Right now, I'd rather not remove the use of this settingProvider custom because it will keep the settings of the user even when the upgrade to a different version of AppWithUserSettings.

  Thank you and best regards,

  Loïc

  PS: I use studio VS 2008 SP1 and Teststand 4.1.1

  Loïc-

  Like Doug mentioned, you are running in an issue similar to that of the other forum thread, he did. I went ahead and implemented workaround for this problem in your example and attached it below.

  I hope this helps. Let me know if you have any questions.

• Failed to initialize the Application example in Hyperion Planning

  Hello
  
  I'm new on Essbase and Hyperion EPM system 11.1.1.1.0 and I'm trying to test the functionality of planning. I have installed and configured the EPM system, and when I run the Diagnostics of the EPM system, everything is successful unless connecting to Essbase Studio Server (which is a separate issue from another thread).
  
  I'm working with the example of planning application included with the installation. I followed the instructions given here from the blog of John Goodwin, but I encounter an error when I try to initialize the sample application. I also tried creating the application through the workspace, which is documented here. I get the same error during initialization of the sample application.
  
  I get the error message said: "failed to initialize the sample Application. See the log for more details. "Where this journal of planning? I'm running on Tomcat.
  
  When I try to create the database, following the blog of John, through the Administration > manage the database > Create, I also am getting an error on step 18 of 21: [console] verification of member formulas. The error reads as follows:
  
  com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
  Error [1200497] discovered in the formula of Member for "411100" members
  Error [1200497] discovered in the formula of Member for "412100" members
  Error [1200497] discovered in the formula of Member for members "412200."
  Error [1200497] discovered in the formula of Member for "451000" members
  Error [1200497] discovered in the formula of Member to Member "501111".
  Error [1200497] discovered in the formula of Member to Member "501112".
  Error [1200497] discovered in the formula of Member to Member '501130.
  Error [1200497] discovered in the formula of Member to Member "501240".
  Error [1200497] discovered in the formula of Member to Member "501250".
  Error [1200497] discovered in the formula of Member to Member '511200.
  Error [1200497] discovered in the formula of Member to Member '511300.
  Error [1200497] discovered in the formula of Member to Member '511400.
  Error [1200497] discovered in the formula of Member to Member "511500".
  Error [1200497] discovered in the formula of Member to Member "511600".
  Error [1200497] discovered in the formula of Member to Member '511700.
  Error [1200497] discovered in the formula of Member to Member '511800.
  
  What should I do to get this application example upwards and running so I can see what he does?
  How to initialize the sample application?
  Why can't create a database correctly (without the above error), so I can then load data into the database of the Consol via the Essbase Administration Services Console? Currently, the outline in environmental assessments do not check (it gives me the same list of members of the above error messages), and so I can't load the sampleapp_data into the database. If someone saw, please help. Thank you.
  
  -Scott

  Hello

  If you remove the application, back, restart schedule, create the sample application again and initialize you should be fine, then you can return the clock to its normal state.

  You always make the changes on the side planning and when you refresh these changes will be pushed to essbase (which you can see with EAS).

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Failed to create the application (first) Workbench ("failed to create the application, check if the application name contains an invalid string).

  Connection to the local server to Livecycle (ss4 trial) works, set up normally - 1.0 repository service provider service provider is "RepositoryProviderService".

  Error message is ambiguous and the issue is certainly not with the name of the application. This is a new installation, so this may be a common pitfall with installation or configuration.

  Thanks Aditaya. I didn't know the DesignTimeService. There is no problem, and I had already checked the other parameters.

  Looking at the logs it turns out that the JVM memory failed. Increase the memory solved the problem.

• Error: Failed to create the application process: operation not permitted - deployment of ripple to Dev Alpha

  Hey people,

  I was puzzled on this the last bit of time and can't seem to find a solution. (The closest thing I could find is here: http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Webapp-not-starting-on-device-VM... but there does appear to be a response [UPDATE: Adam Stanley mentioned that it was due to a missing Debug token, and this isn't the case for me.])

  When I try to "Package & launch" of the ripple, the project is created correctly and even installs the application on the device (is the application icon on the home screen). However, when he tries to run the application, the console of the ripple spit:

  "Error: cannot create the application process: operation not permitted".

  Any later attempt to open the application from the icon on the screen will result in an immediate fall.

  As an attempt to circumvent, I use "Package & sign" and then run the blackberry-deploy with installApp - launchApp - tool options and... it generates the same error as described above.

  I'm working on OS X, and I successfully installed the Webworks SDK as well as the undulation on Chrome Plugin. I have a project together upward with a running python web server and can view the content properly on the ripple. I have my signature correctly registered keys and I generated the file debugtoken.bar. I downloaded the debugtoken on the alpha dev successfully device and placed a copy of the debugtoken.bar file in the root folder of the SDK Webworks. The unit is in developer mode.

  Someone at-troubleshooting suggestions?

  [Edited for format (original post deleted line breaks) and also to highlight a number of things]

  So after getting back to the question, I loaded build with the SDK 1675 Webworks (1.0.4.5) published today, and I was able to go beyond the permission error that plagued me previously.

  Thanks again for the help Adam.

• Failed to create the application of FDM

  Hi all

  I am a newbie in FDM Hyperion, I installed and configured HFM and FDM 11.1.2.3 2008R2 in VM window.

  Installation went well and the configuration went all very well for the Application Server, Load Balancing Manager, the Task Manager and web config Manager

  I am able to create a HFM application, but I am not able to create an Application <>FDM.

  I am creating the application using the Workbench. So I give all the details like name of the application, description, App Path & App group under general tab Oledb Provider, the service name, user and password in the database of the tab and click on 'OK '. After a while, I get a pop up message "unable to connect to the database. Please check the information of database and verify that the database is accessible."

  I did a search and found the following two links, but still no luck.

  http://Hyperion-Mady.blogspot.in/2013/11/unable-to-connect-to-database-please.html

  https://community.Oracle.com/thread/3538368

  Please help me!

  Hello

  have you given a static IP to your VM.

  If so, then open the hosts file and put an entry for that IP with FQDN.

  It seems also that you have installed new oracle client according to the PATH variable, you don't have it?

  Kind regards

  -DM

• Failed to create the application of planning through traditional Application 11.1.2

  The URL of planning I try to create a test application in my development environment. To finish I have error "treatment request check the log for details"
  
  Scoured the server and it is impossible to find the 'diary '. Anyone know what the name of the error log to create a classic application in Hyperion Planning?
  
  JTS

  John,

  This trick you show us in regedit to 9.3.1 is now automatic in 11.1.2. Someone at - it get vague planning errors log files below:

  drive letter: \Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs
  drive letter: \Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services

  JTS

• How to separate Testing and Production .fmx in the application server

  Our application server, we have only a single installation of forms. This means that we don't have a single directory for .fmx and these files are used by users to test and production. If a change has been made, it will have an impact on both environments and is not ideal.
  
  How can we separate executable forms without having to install another instance of forms or with minimal impact? Should what configuration files I copy or reconfigure? Pls advice on the steps to achieve this. Thank you.
  
  Published by: user12057612 on January 13, 2010 14:30

  If you set workingDirectory, forms will investigate your module first in workingDirectory, if she is not found it will check FORMS_PATH in file approx.
  Search for modules order is
  -WorkingDirectory (in formsweb.cfg)
  -FORMS_PATH (in the .env folder)
  -ORACLE_PATH (in the .env folder)

• Windows Search service does not have to create the search index created, 0x80040d66, failed to add the Application to collect internal error

  769 events

  The most recent Instance was on:

  Error of 2010-06-14 22:47:36 search service search 1006

  Log name: Application
  Source: Microsoft-Windows-search
  Publication date: 2010-06-14 22:47:36
  Event ID: 1006
  Task category: Search Service
  Level: error
  Keywords: Classic

  Trial has been on:

  2010-05-11 Error 1006 research service 01:46:40

  Previous info from event viewer.

  Services:

  Windows Search

  Start the service

  Error message:

  Windows could not start the Windows search on the Local computer. For
  more information, check the system event log. If it's a
  non-Microsoft service, contact the service vendor and refer to
  service special-2147218141 error code.

  Windows Journal system (in the event viewer) for the Date and this has occurred first:

  Error on 2010-05-11 01:46:40 Service Control Manager Eventlog Provider 7024 no

  The Windows Search service stopped with the special service 2147749155 (0x80040D23) error.

  Log name: System
  Source: Service Control Manager
  Date: 2010-05-11 01:46:40
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic

  We are all ONE!

  I tried some of the solutions that offered you, but I think what was my problem was caused by the presence of the index on an external hard drive and when the computer has been restarted the drive letter of the USB drive was not the same.  If I remember well, it was a problem that I wasn't yet able to rebuild the index.

  I now have the index on my hard C at the level of the root drive.  I was about to point to the other half of a 16 GB flash drive which is also USB, but Windows Vista Home Premium does not only because it appears that are considered removable flash drives, but external USB drives are not presented in this category.

  Currently I have about 74 000 items indexed.

  We are all ONE!

• wwv_flow_utilities. REDIRECT_URL doesn't work is not in trial on submitting the application

  Hello
  
  I had this job for hours. In the process of changing the redirect url somehow, I changed something and what follows does not work anymore. Thanks for your help.
  
  BEGIN
  IF & APP_PAGE_ID.! = 101 THEN
  IF: P0_JAVASCRIPT_CHECK! = "JAVASCRIPT_ENABLED" THEN
  update cross-set test_data = 'I've been here 1!'; -I have confirmed that the code gets here. Since this is a test without having to commit explicitly as Apex will do
  wwv_flow_utilities. REDIRECT_URL ('f? p = & APP_ID.:1: & APP_SESSION.'); -It does not work!
  update cross-set test_data = 'I've been here 2!'; -I have confirmed that the code gets here. Since this is a test without having to commit explicitly as Apex will do
  END IF;
  END IF;
  END;
  
  
  
  
  
  Thank you
  Paresh

  Paresh:

  You say by setting apex_application.g_unrecoverable_error APEX to give up to deal with the rest of the page.

  CITY

• I tried to update and it says get the application manager.  When I do, it will fail to load the application manager.  What should I do?

  I n 't know what to do then.  I uninstalled and tried again.  Nothing works.

  I ended up update. I uninstalled and restarted my Mac then used the

  cleaning and restarted again and then installed creative cloud again and it

  time, he was beautiful.

  Penny

  Friday, February 27, 2015, Jeff A Wright [email protected]>

• Failed to create the application after the last update...

  

  Since the last update a few days ago, I was able to launch the DPS App generator... Can anyone help?

  Thank you.

  Michael

  Have you tried to uninstall the App Builder download new version update of the Adobe.com site?

  http://www.Adobe.com/support/downloads/product.jsp?product=182&platform=Macintosh

• Logging within the Application in Release Mode

  Hello world!

  I'm trying to implement logging for one of my applications. So what I did is to follow the directions of this blog

  Logging within your Application. The blackBerry developer blog

  "

  QString file = QString("path/to/mylogfile.txt");

  FILE * file = fopen (theFile.toStdString () .c_str (), 'w');
  slog2_dump_logs_to_file (file, SLOG2_DUMP_LOGS_ALL);
  fclose (file);

  "

  What I need is to save logs to a file and send it by e-mail to the support team.

  The feature described in the blackberry blog post works ONLY in debug / test mode. When running the application in release mode, it seems, the logfile created, contains only platform related messages and all my messages created via the functions of qDebug() of C++ and javascript "console.log ()" are absent...

  Any thoughts anyone?

  Thank you in advance.

  Another problem with the help of slogger, is there a very small buffer. According to what you sign, you can't get all the information you need.

  our solution is probably improved, but so far I have found nothing better.

  We use qInstallMsgHandler to get our own class to handle debugging messages:

  qInstallMsgHandler(LoggerService::logMessage);
  
  void LoggerService::logMessage(QtMsgType type, const char *msg)
  

  in this static method, we check the content of the message and use QtConcurrent::run to write the message to a database sqlite modality.

  To view the log, we use a listview with a db query.

  To share the newspaper read us the db entries in a file, and then share via invocation framework.

• Validation in the application manager

  Guys,
  
  I have a requirement to validate data in a field for a particular format when submitting the application. I am using validation Manager to achieve this. So when the format is not aligned, can demand showed an error on the user interface? Please let me know.
  
  Thank you

  Yes, you can use a RequestDataValidator (implemented as a plugin and configured in the Dataset query) to perform validation on request. If in this code, you throw an InvalidRequestDataException denies the request with an error is displayed. See article metalink [1317087.1 ID].