Dynamic text field will not wrap text

Similar Questions

• A text will not wrap around the object. Some does. Anyone?

  I worked in InDesgin (currently the CS6 for Mac) for many years. I'm not an expert, but fairly well-versed and comfortable with the program. I think I know almost everything about the wrapping of text and its options and how it works. But it drives me crazy.

  I have an imported MSWord part of the text. I have an item I want to insert in the text. Normal procedure. Easy. But this text will NOT wrap around the object. What about other texts? Yes. Other text in the document wrap around that object even very well.

  I rebooted the computer and the program. Check the settings as much as I can think and even spruced up the document from scratch as a MS Word document. Yet, no film.

  This happened to someone? What is going on? Help.

  Check the options of text block for the text that will not wrap. Ignore text dresses it is checked?

• Date field will not update

  Apex using pre-packaged "Group calendar" app I work on page 10. I updated the form to include a custom date field and added all the code to the EBA_ca_api package

  My problem is that my custom date field will not retain the value on the edition of an event. I have other custom fields that are not date fields (field numbers and text) that update without any problem...

  How can I update my date fields?

  Update:

  I am sure that the issue is somewhere in the package, the values are not updated for some reason any.

  The pre-existing app code uses this statement

  If to_char()c1.event_date_time,' DD-MON-RRRR HH:MIam ') ! = TO_CHAR ()p_event_date_time ' DD-MON-RRRR HH:MIam '( ) then

  Update EBA_ca_events

  set event_date_time = p_event_date_time

            where event_id = p_event_id ;

        end if ;

  
  

  and it works for this field when updating. I tried to use this code on my custom date field and it didn't work, so now I'm looking for something like this

  if TO_CHAR (nvl(c1.event_due_date,'0')) ! = TO_CHAR (nvl(p_event_due_date,'0')) then

  Update EBA_ca_events

  set event_due_date = p_event_due_date

             where event_id = p_event_id ;

  end if ;  -Copy the following code causes an error when you try to apply changes (not a month valid)

  
  

  Because the following code works and updates to my date no fields

  
  

  If nvl(c1.event_not1,'0')! = nvl(p_event_not1,'0') then

  Update EBA_ca_events

  Set event_not1 = p_event_not1

  where event_id = p_event_id;

  end if;

  Does the code work if I'm on the right track? -At the end of the day what I'm trying to do, it is to be able to add a date field for the application of group calendar pre-packaged on the creation form and event on page 10, and then later change this event and updated it to the database.

  
  

  Richie V wrote:

  No I did not, but do you know how to fix the error happen and allow the new field custom_date to be edited and saved in the database?

  Thereafter. The missing pieces of the puzzle were the type of the values concerned was TIMESTAMP WITH LOCAL TIMEZONE, and that type conversion had already been made in the process of page APEX. Therefore, the required code in the package:

  -- custom date code
  
  if nvl(to_char(c1.custom_date,'DD-MON-RRRR HH:MIam') , 'X')!= nvl(to_char(p_custom_date,'DD-MON-RRRR HH:MIam'), 'X')
  then
      update EBA_ca_events
      set custom_date = p_custom_date
      where event_id = p_event_id;
  end if;
  

• Form fields will not save when employee saves the PDF file

  I'm on Acrobat pro (mac osx), my colleague is on Acrobat Reader 9 (XP pc). I did a few form fields in a PDF file and saved. Whenever she changes a part of the text in the fields and tries to save it will not save the things she entered. Whenever it opens, it contains my field data for moose.

  What steps should I take to make it to where she can enter their own text and save it without data loss.

  In Acrobat 9, select: Advanced > extend features in Adobe Reader

• First form field will not click

  Hi. I build my first form and for some reason the first form field does not allow the user to click in it to type. If you press the tab key, it will highlight the area and allow to type. But I would have if someone can click and type. Any thoughts on why this is happening? My address is: http://www.zooligans.net This is the first field, the full name. Here is my code. Thank you!

  < do action = "" / gdform.php "method ="post"enctype =" application/x-www-formulaires-urlencoded"name ="form"id ="form">"

  < p >

  < label for = "Name" > full name * < / label >

  < br / >

  < input name = "Name" type = "text" id = "Name" tabindex = "1" size = "65" / >

  < br / >

  < label for = "Email" > < br / >

  Email * < / label >

  < br / >

  < input name = "Email" type = "text" id = "Email" tabindex = "2" size = "65" / >

  < br / >

  < label for = "Address" > < br / >

  < / label >

  < label for 'Address' = > address < / label > *.

  < br / >

  < input name = "Address" type = "text" id = "Address" tabindex = "3" size = "65" / >

  < br / >

  < br / >

  City of < label for 'City' = > * < / label >

  < input name = "City" type = "text" id = "City" tabindex = "4" size = "32" / >

  State of < label for 'ST' = > * < / label >

  < input name = "ST" type = "text" id = "ST" tabindex = "5" size = "5" / >

  < label for "ZIP" = > ZIP * < / label >

  < input name = "ZIP" type = "text" id = "ZIP" tabindex = "6" size = "10" / >

  < br / >

  < label for = 'phone' > < br / >

  < / label >

  < label for 'Phone' = > phone < / label >

  < input name = "Phone" type = "text" id = "Phone" tabindex = "7" size = "30" / >

  < label for "Im a" = > I'm a * < / label >

  "< select name =" Im a"id =" Im a "tabindex ="8">

  Choose one of the < option > </option >

  < option value = "retailer" > detailing < / option >

  < option value = "consumer" > customers < / option >

  < / select >

  < br / >

  < label for 'Comments' = > < br / >

  Comments < br / >

  < / label >

  < = 'comments' id = cols 'comments' textarea name = "64" lines = "5" > < / textarea >

  < br / >

  < br / >

  < input name = "send" type = "submit" id = "send" onclick = "MM_validateForm (' name ',", 'R', 'Email', ","RisEmail', 'Address', ", 'R', 'City'", 'R', "ST',", 'R', 'ZIP',", 'RisNum');" return document. MM_returnValue"value ="Submit"/ >

  < br / >

  " < input name ="recipient"type ="hidden"id = 'recipient' value = ' [email protected] "/ > "

  < input name = "redirect" type = "hidden" id = "redirect" value = "thankyou.html" / > "

  < /p >

  < / make >

  There is something not quite right about the code of your pages. I have'nt discovered what yet, but I can tell you that it seems to be your footer

  who is somehow blocking the form field

  Add style = "" clear: both; "as shown below and see what is happening:"

• Field will not take or send data

  I have a form that I'm trying to update in some internal web application.

  My problem is that the first field of the form seems not to exist.  I can view the field and its properties in the designer and the associated XML source seems valid, but when I export or send shape data nothing gets exported or submitted for the first field.  If I try to open the PDF file with the data via a xdp file, the first field only fill up, but do the rest.

  It seems to me to be successful in deleting field and adding a new, but it seems to greatly increase the size of the file (90ko at least 133 KB, sometimes 300 KB).

  Have I missed something obvious that will make this field export and import its data?

  If not, is there a way to reduce the size of my PDF after that I have delete and re-create the field?

  Thank you
  Kyle

  Hello

  It is your bound control field or not. Maybebecause of bibding you can get posted data on the ground.

  Sometimes after copy/paste some elements on the form, the source xml of the form becomes little wrong, he begins to have a lot of lines like this:

  , due to this size form could be more than 1 MB, the solution is to remove the unnecessary lines.

  BR,

  Paul Butenko

• Email text will not wrap inside the visible screen. Is this number 9 IOS?  Is there a solution?

  Is there a solution to my email texts that range from the visible area while typing on iPad 2?  Is this a problem with IOS 9?

  Yes, it's a matter of IOS 9 and I've not found a way to prevent it. Fortunately the enamel is properly formatted when it is received. For now you should be able to move the email back with a finger to see what is typed.

• Field will not be centered when the text adjusts

  I have a centered LabelField.  It works fine until the text is too long.  It envelops like I want it, but the center alignment is lost.  I also tried a RichTextField without success.  Any ideas?

  GridFieldManager gfmTop = new GridFieldManager(2,0);super.bodyManager.add(gfmTop);
  
  VerticalFieldManager vfmTopLeft = new VerticalFieldManager();vfmTopLeft.setPadding(0,15,0,0);long styleCenter = Field.FIELD_VCENTER | Field.FIELD_HCENTER;vfmTopLeft.add(new BitmapField(image, styleCenter));vfmTopLeft.add(new RichTextField("See Additional Images", styleCenter));vfmTopLeft.add(new LineBreakField(FONT_HEIGHT));vfmTopLeft.add(new LabelField("Availability:", styleCenter));vfmTopLeft.add(new LabelField("IN STOCK", styleCenter));vfmTopLeft.add(new LineBreakField(FONT_HEIGHT));vfmTopLeft.add(new LabelField("Shipping Included", styleCenter));gfmTop.add(vfmTopLeft);
  

  

  added DrawStyle.HCENTER and it's good.

  long styleCenter = Field.FIELD_VCENTER | Field.FIELD_HCENTER | DrawStyle.HCENTER;
  

• I created a form using Acrobat DC and has not seen how constrain text input. For example, I want only the alpha characters in my name field, will not accept dates after 1930, ect. Where is this feature in the drafting of forms to create?

  How to create a text field to create a form to fill out from MS Word, who is obliged by using Acrobat DC form design? For example allow alphabetic characters only in this area. Or allow only the dates after 1920?

  Hi michaelg31489520,

  You can set properties for form field in Acrobat DC also PDF, Adobe Acrobat form field properties.

  If you want to implement all the constraints you can also use JavaScript.

  Kind regards
  Nicos

• Calculation of field - sum fields will not check

  Hello

  I have trouble getting Adobe Acrobat X Pro (10.1.16) to calculate a field.

  The fields I want to summarize are all formatted in numbers (in dollars), but when I created the 'total' field automatically calculates all the others, I can't click on the check box next to the fields that I want to do the sum. "Select all" selects all "deselect all" deselects all but when I click on the individual check boxes next to the titles of field, nothing happens. Double click does not work. Saving, closing, reopening does not work.

  I'm doing something wrong or is this a bug?

  This is a bug. Use the space bar or click a little out of the center of the boxes for them.

• Form field will not calculate

  I want to check/savings for a total value of the account. Audit field always comes up with 0, in spite of a different value. In other words, verification of field doesn't seem to work.

  What you need to do is change each field to enter a number format. They are currently set to None, and some fields have spaces and other non-numeric characters in them, so the result is not a number. You must reset the form before you do.

• Field name not appearing is not in the Info signatory field

  I have created a new model, but when you add fields, the name of the signer Info field will not appear on the document sent for signature.  I could re - open the model and he was always there, only, it was not signed.  The recipient was not able to complete anything for this field.  I finally gave up and changed to a plain text field and it appeared as expected.  All other fields worked as expected.  It is a very simple, only sent document to 1 recipient and didn't require any additional signature.

  Hi kerrye92505188,

  Please be informed "signer Info name field ' will automatically capture the names of the signatories of the document, a sign not called not to fill in the information in this area."

  Please check your document, name of the signatory would have automatically captured in this area.

  Kind regards

  Nicos

• Dynamic text field not updated to actionscript in the 2nd Frame

  I have a clip with two frames. In the 2nd frame there is a clip that has a text field.

  My goal is to some events that I will be proposing to the frame that has the clip with the text field.

  I'm trying to update the text field with a code something like: -.

  public void updateTxtFld(e:Event)

  {

  My goal is to certain events show the clip with the text field

  questBG.gotoAndStop ("glow");

  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field

  }

  After some time I again back to the framework that has no movie clip masking so the clip

  public void masquer()

  {

  questBG.gotoAndStop ("idle");

  }

  The text field not updated since the actionscript code even if trace (arrowText.text) shows the updated value.

  Now, if I remove the clip of frames & change the updateTxtFld() as

  public void updateTxtFld(e:Event)

  {

  (questBG.getChildByName ('arrowBG') as Sprite) .visible = true;

  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field

  }

  Then it works very well with the updated text in the text field. It seems that there seems to be a problem in dynamic text field update in frames.

  I also checked that the incorporation of text is fine in both cases

  I created the FLAS using CS Professional 5.5 & I am trying to change the text field using actionscript running in Flex Builder 4.7.   Let me know if I need to send the fla (working and non-working version).

  you are the assignment of text to arrowText before the timeline then moves to "shine".

  Use the render event to assign the text:

  public void updateTxtFld(e:Event)

  {

  My goal is to certain events show the clip with the text field

  questBG.gotoAndStop ("glow");

  internship. Invalidate();

  this.addEventListener (Event.RENDER, assignTextF);

  }

  function assignTextF(e:Event):void {}
  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field
  }

• It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?

  It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?

  It would be the default path to wrap the text with the image when you work in Design view.

  This document explains more:

  https://helpx.Adobe.com/Muse/using/wrapping-text-image.html

  Thank you

  Sanjit

• Text wrapping will not work?

  For some reason, a text wrapping will not work. I placed the object above the text. but whenever I try to create I just get this outline look odd around the text (see image below). Thanks much for any help!

  

  Your objects are grouped. This should not be the case with the text. You must also remove the wrapping of the text itself (the lines around the text is the scarf).

  Apply it only to the circle.