dynamic titles or chapter... markers?

Similar Questions

• Name of button associated with chapter markers

  I use dynamic links to integrate a PrPro CS5.5 Encore project for the creation of a DVD. I have inserted chapter markers in the PrPro project and to link the buttons of the 'Scènes' submenu to these markers. I use the pickwick tool to associate each button with the marker in the timeline and asking button title to take the name of the binding. The problem, however, is that the name would eventually be truncated to fit in the text box of the "Entertainment" model that I use. I tried to increase the size of the text box, but it only increases the size of the text. Is it possible to have the text box developing (manually or automatically) so that the size of point remains the same, but there is enough space to fit the whole title?

  Tool to use the text (or vertical). Click in the box until the bounding box appears, then drag the box.

  I use the tool pickwick

  I didn't know what was the pickwhip, and now I always laugh when I see pickwick!

• Generate the table of contents with chapter markers?

  It has been a while since I had to install and create a table of contents for a long document of single file, but I'm sure that I created TOCs in this way in the past. Then, why the text in the Section markers will appear in the table of contents? It is even possible to generate a table of contents that contains text of article marker?

  I use InDesign CS5 in Windows. I have a file single document I'm trying to generate a table of contents for. I designed a 16-page manual in an inDesign file that includes a cover page, table of contents page and seven "chapters."

  I created a separate section for each 'chapter' and used Chapter markers in the top of the page master for chapter names. It's something I did in the past of syntactically long documents containing several chapters.

  I put the first page of each 'chapter' as a new Section on the Pages panel. In numbering and Section Options for each page, I checked the Section getting started, Automatic Page numbering, the Style of Page numbering: 1,2,3,4... and in Section marker: I put the name of 'chapter' in the text box.

  

  I've set up paragraph and character Styles and has used throughout my document. When I put in place the table of contents I created everything correctly, including a heading style that I used for all the sub lines in my file and my style of Section marker for chapter names.

  

  When I insert the table of contents, generate headers sub with their page numbers, but the titles of the chapters which are chapter markers do not generate. Am I missing something or is it still possible to enter the text of chapter markers in a table of contents? I'm sure that he's worked in the past. Can anyone offer a solution for this?

  Thank you

  Kat

  Looks like the markers section present only in the table of contents if they are on a document page. Try manually to the substitution of the frame.

• At the battle of the still chapter markers

  Hello!

  I spent the last 4 hours trying to get the AE still chapter markers. Nothing seems to work. I tried the two markers of model and benchmark layer, with the text and numbers in almost all areas. I tried the AVi and Quicktime containers as my export format. But nothing that I do not seem to bring my markers yet as chapters.

  The only way it works is if I use Dynamic Link, but DL is far too slow for this project because my AE stuff has so much on in there. So I really need to export an intermediate EI file.

  Someone at - it successfully exported a video file from After effects to still with marks of layer AE transformed into chapter marks still? I certainly have no chance with this process ;/

  Who has never worked? I know for sure that it works with my HDV / DV captured view first (on PC), but I think remember me endless discussions about it being broken for the rest. So this may be a hopeless case, after all. What you could try as a detour is to use Soundbooth and generate a dummy audio file with markers, that AE so much still to recognize correctly, but you will have to bite the bullet and put markers of tha manually into the still of otehrwise...

  Mylenium

• CS4-exporting in Encore chapter markers?

  In my old version of Premiere Pro, export an AVI file which contained still-readable chapter markers was pretty simple.  There is a box on the screen of the export settings, and as long as you have checked it, still would be able to pick the chapter markers.

  It seems that life is not so simple in CS4.

  Export in CS4 dialog does not appear to have a checkbox to indicate I want chapter markers included in the metadata of the AVI files.

  I find and check the box for each individual marker indicate I want that he be treated as a marker yet.  But when I export the movie to an AVI file and then import the AVI file in yet, there is no chapter marker.

  I read the help message, who recommended the file > Adobe Dynamic Link > Send in yet, but when I tried this option I find that it is a real pain in the neck.  He wanted to create a new project, and I couldn't find a way to tell ilt to use my existing project.  Also, I want to use the same sequence in several projects yet, so I don't really want to tie it to an individual project - I want to just export it into an AVI file that contains the metadata to be used in a variety of projects that I can use it in.

  Is there a way to do what my old version of Premiere Pro enabled me to do — export an AVI file that contains necessary for recall chapter markers?

  En chapter markers can be exported since CS4 if:

  1. You send the sequence to en via Dynamic Link.  The markers must not have a name in this case.
  2. You name chapter markers and export of Pr as a DVD MPEG2.  In this case, chapter markers must have a name, and you must check "Include XMP Source metadata" in the menu of the export settings dialog box.  (The information in chapter markers are included in the XMP sidecar file)

  Gone is the possibility of exporting AVI files with chapter markers.

  Even if you can not specify which project en you want to leave Pr when sending a sequence to en via Dynamic Link, you can open any project of en and import one or more sequences of Pr via file again. Command of Adobe Dynamic Link.

  -Jeff

• Compressor can import markers .wav or .txt cue lists and convert them to chapter markers?

  A simple...

  Compressor can import markers .wav or .txt cue lists and convert them to chapter markers?

  Best

  T

  See this support document and go where it says "Add markers using a list of chapter markers":

  Compressor 4: Add markers

  https://support.Apple.com/kb/PH21224

• You can add chapter markers... I know they went from iMovie 10.1

  Very frustrated with the iMovie 'upgrade', but I have already imported and edited the video so new that it is not possible to go back to the old backups. My frustration is the lack of chapter markers. If I want to burn to a DVD or look in other software, I would that the ability to jump quickly between specific scenes in a video of 1 h. For example, I have a video of dozens of swimming events. My girls love to watch their races to watch their technique, and they often want to attend a race several times given. I just want to be able to hit 'new chapter' and be at the start of a particular race. Since iMovie 10.1 can no longer do this, I'm looking for other solutions... without having to invest hundreds. I tried to import into GarageBand (an older version) and I think this might work (my version of exports still GB to iDVD), but the timeline for Go is kind of awkward to find exactly where I want to place markers. So, although I might end up here, I hope to other solutions.

  I found Subler.  I have tested it on a file exported .mp4 but it seems to work well (even after importing to iDVD).

• For use in VLC chapter markers

  I have a video I play in VLC and want to use the next / previous buttons, but chapter markers are not displayed in VLC, is anyway to do this?

  Markers used in the first are still not for other devices.

  Might need to read the manual of vlc or go on their forum.

• How to import Final Cut Pro video in still and still get the chapter markers?

  I want to burn a DVD of a Final Cut Pro video.  How can I import in again and still get the chapter markers?

  I imported as a timeline, but the chapter markers do not show

  You also try and put a candle Chevy in a Ford engine?

  As far as I know, there is no interoperability between still (and program from Adobe) and FCP (Apple program)

• in the film in the Ipad chapter markers

  Is it possible to add to a video chapter markers installed in Folio tat overlays so when read on an Ipad we can use these markers as a marker for links to other pages of information or other videos to increase the info on this particular chapter.

  I tried to add markers to the Prime Minister but could not bring him to be seen when the video has been held back in InDesign and Folio overlays?

  This is not supported by DPS.

  Neil

• Seeing no chapter markers in Encore CS6.

  I created Chapter (not the generic markers) in first Pro CC markers, and given each of them the names (no comment), that I confirmed arise as hover text in the timeline of the PrP.  Now, when I tried to export a simple sequence with this chapter, as MPEG-2/DVD markers, make chapter markers appear when I "import calendar" in Encore CS6.  However, when I export my whole project, which nested sequences (not sure if it matters), the base clips which have chapter markers... I have him not see my chapter markers in Encore.  What is a limit?  I mean, in the PrP chapter markers must be set to the shallower (less nested) level of the timeline to export?

  I looked around forums some, and what little I found spans a few versions of again, with some changes to the UI complications.  One, in Encore CS4, advised the "make sure you have 'Include Source XMP data' selected,'... but I can't find such an option (in my most recent software).  The closest thing is the button of "metadata" at the bottom of the Adobe Media Encoder, which opens a panel with a drop down (top-left) to "export options", including "Create file" or "embed in the output file. Unfortunately, the latter is gray.  I understand that certain types of format do not xmp data to be shipped, but I thought that MPEG-2/DVD enabled him.  Nevertheless, the online tutorials I found say that Encore CS6 is smart enough to pick the file with data xmp (chapter markers).  With this in mind, I was careful to not rename or move the file .xmp of which created Adobe Media Encoder.

  Any thoughts?

  Thank you.

  It seems that the problem is nested sequences.

  Fix. Markers are only exported to the exported sequence.

  is there any fix that doesn't involve respotting and retype it all markers from ~ 40 to the timeline root manually?

  Not that I know of.

• Export of in CC2015 chapter markers

  I spent all day preparing sequences of the Organization for creating files of DVD in CS6 again by creating chapter markers in the sequences of the body. It is a practice that I used time and again in previous versions of the body, but I can't get the chapter markers for import into even this go round. With zero information in chapter import files. Is this a bug with the new software, or am I missing something? I specifically selected the "Chapter marker" option when creating markers. I would not lose a day of work, any input would be greatly appreciated.

  Thank you!

  As well as MPEG2-DVD preset, I thought by selecting "Metadata" (which are at the bottom of the export settings) next to the export queue cancel

  without selecting metadata stays black after selecting it metadata a 'blue line' under

  If metadata is selected, a window of export of metadata. I just said OK, once I see the check mark next to "Export Master speech Track and markers"

  This is the desired sequence markers. Yes, chapter markers. Fill out their names in first and were still also use chapter names.

• How can I update my DVD .xmp without chapter markers - export all!

  I use first Pro CC to create a DVD mpeg-2. I already exported the DVD, but I forgot to create my chapter markers. I have now taken up in first and added my markers, so is it possible to export the metadata on its own and attach it to the DVD mpeg2 files. I only need to edit the metadata, I don't want to re - export the entire project! (who has had 30 hours :/) Thank you!

  If you still use to make the dvd, you can add markers there or you might be able to export only the audio first and may have markers. If this does not work, first duplicate your sequence and replace it all with the same length of black video, export to mpeg-2 dvd, chose the faster settings, something like 7. CBR is a new timeline with markers in the still of this export, then just replace the black with the correct video.

• Sequences can inherit the nested sequences chapter markers?

  I am in my project of edition about 2 hours of video. For that things remain manageable and being able to do fast makes it partial, I have divided the project into several parts. Each part is edited in a clean sequence. Finally I combine parts by adding them in the form of sequences embedded in my master sequence. The problem with this approach is that I can't get the creation to inherit the nested sequences chapter markers. For example, in my 03 sequence, I put a chapter marker.

  

  When I put this sequence in my master sequence, chapter markers will not appear and it is also not be counted when I export the main movie to a DVD:

  

  I could of course place the markers on the main sequence, but I would rather their place in the sequence of the child for two reasons:

  • Markers and edited scenes would be in one place.
  • If I choose to re - edit some parts of the sequence, I won't forget to update the position of the mark.

  I'd love to hear your ideas on how I could do this. If my work flow is poor/ineffective, I'd love to hear about that, too

  You can do all your editing in different sequences and bring them a master.

  But I leave the markers to the end of the Master.

  You want to export a DVD or BD?

• Chapter number on the same line as the title of chapter in the Table of contents

  How can I get the chapter number on the same line as the title of chapter in the automatic table of contents (page layout: Table of contents)? I want to have the number followed by a period, like this: "1. the chapter title" with the page number on the right (no problem with the page number). See the picture of what has gone wrong. I wonder if I put chapter numbers in a separate text box in the document without a paragraph break after the number. I know I can change at the end, but do not want to lose the settings with the updates.

  

  Make the announcements of chapter TOC using a Style that includes a numbered list of type...