Dynamic UI shell

Similar Questions

• Version dynamic tab shell 12 c

  Hi all

  I use JDeveloper 12 c (12.1.2.0.0).

  I would like to know if there is a version of 12 c shell available dynamic tab and if so, from where I can download the source of it.

  Thanks in advance,

  Gijith.

  Hi Frank,.

  In the link you provided above ( Shell of the user interface - interface user ADF templates - dynamic tabs UI Shell model functional model UI ) now I can see that the zip source name has changed to dynamic-tab-shell-src - 121200.zip. Is it a changed which is fully compatible with 12 c?

  Gijith.

• AMPe ADF with Dynamic tab Shell not made in iPAD 1 +.

  Hello
  
  We used the Oracle Dynamic tab Shell templates to build our page of dashboard with several dynamic tabs.
  A year back when we have initially created the main dashboard with Dynamic tab Shell and used of the UIShell API to open new dynamic tab when clicking the command links in the browser side of left hand. We started with Jdev 11.1.1.3 and upgrade us until Jdev 11.1.1.5.
  
  Now this last requirement is, we need to test our applications in the Safari browser in iPAD (2.0). During the test, we observed under questions.
  
  (1) the page with Dynamic tab Shell JSPX is keep showing "Loading"... "We had updated the Safari browser twice to render the page.
  (2) any af:commandLink under the JSPX which has shell model dynamic tab, does not. We have lots of links on the left navigation and when clicking on each link will open a new tab dynamic (we use UIShell API). Nothing happens when clicking on these af:commandLinks.
  (3) we have 'Home' and 'Logout' links at the top right. Nothing happens on the links click too.
  
  All these as af:commandLinks and af:commandButtons not working as expected when we have them beside a JSPX page without shell dynamic tab.
  
  Tested and observed the same behavior both in version 1.0 and newer iPad iPAD 2.0.
  We desperately need help on thin. Pls let us know, if I need to provide more details. Are there specific configurations required to make it work in Jdev 11.1.1.5? At this stage we cannot improve our Env 11.1.1.6 or 11.1.2 as we already have these applications in Production and we should give users flexibility to be used in the iPAD.
  
  Help, please!
  
  Thank you!!
  Subba.

  Subba,

  I understand, however support for iPad added in PS5 is a set of new features, not a bug fix, so this cannot be claimed as a one off patch with the support of the Oracle. In this case that is expected to capture customers highlights new features of upgrade.

  Thank you

• Oracle Dynamic tabs Shell - open same workflow in multiple tabs

  Hello
  
  Summary of the problem:
  Is there a way to open a workflow (bounded task flows, with always create new scope txn) in multiple tabs using a page (jspx) based on the model of dynamic tabs Oracle shell. That is, the user must be able to work on the two tabs (loaded with the same workflow) independently.
  
  Problem scenario:
  I use model Oracle Dynamic tabs Shell in one of my .jspx page say default.jspx. This default.jspx is the entry point of my app via adfc - config.Xml.
  
  Tell my navigation menu a itemNode node1
  
  Node1-> corresponds to a stream of flow available1 (bounded task flows, with always create new scope txn)
  
  The navigation of the user I wanted to is as below:
  
  When the application is run default.jspx is loaded with above the navigation menu.
  (1) when the user clicks on node 1, it must open the stream in a dynamic tab available1 say tab1
  (2) when the user clicks on node 1 again, it must open the stream in another dynamic tab available1 say tab2
  The user must be able to work on the two tabs (loaded with the same workflow) independently.
  
  Question: When I tried the application above that I encounter the error below:
  Caused by: oracle.adf.controller.activity.ActivityLogicException: ADFC-00020: workflow ' / WEB-INF/flows/homeTF.xml#homeTF' requires a new transaction, but surgery is already open on the chassis.
  
  Thank you and best regards,
  Pramod Gujjeti

  Pramod salvation,

  Have you tried to set the attributes of your workflow Transaction? Open your workflow definition and then go to preview Tab. Change the appropriate attributes as defining the transaction as 'Always start new operation' or by unchecking the ' data controls share with calling workflow. Try to mix the settings and find the one that meet your needs.

  Kind regards
  Pino

• How to put logoImagePath in oracle Dynamic tabs Shell

  Hello
  I use the model 'oracle Dynamic tabs Shell', and I want to replace the logo 'oracle' with my own logo image.
  Unfortunately, I do not know how to set the "logoImagePath".
  Can someone help me?
  
  
  Thanks in advance

  Hello
  If your logo image file is for example in the public_html/images folder, then you can set the logoImagePath as follows:

  Pino

• ADF-dynamic UI Shell Tabs

  Hi all

  I use Jdeveloper 11.1.2.4.

  USE CASE-

  I implement dynamic UI sell in my application. Where, by clicking on the left navigation, the new taskflow opens in a tab (using API).

  Ex, on clicking the search with navigation link, SearchTaskFlow opens in a new tab. It works great so far.

  SearchTaskflow has two Jsff leader (searchEmp & DetailsEmp), by selecting a line in the searchEmp page, the detailsEmp page shows the details of the employee. In my case, detailEmp is the part of the same TAB.

  To display the page of detailEMP (who used detail), in a new TAB.

  The interface shell dynamic user takes for my use case? Allows to create a new tab when running, which suits me.

  Suggest me how to achieve this.

  Concerning

  Problem solved.

  Cause - launcher file, TabContext.getCurrentInstance () was null for me and the NPES occurs.

  Solution-added/set the parameter for the tabContext. (Added the new parameter in the Taskflow bounded. ex, parameter = tabContext & Values = #{pageFlowScope.tabContext})

  See you soon!

  Concerning

• Dynamic tab Shell cut Images and text

  I use the Shell dynamic tab on a page and try to get a few images-links and output text display correctly in the global toolbar.  I want the links to the image on the left side of the toolbar and the output on the right side text.  The problem is the pictures are cut off and the text is envelope in a small space and is not entirely legible.  The images are 32 x 32 pixels.  Should I resize them to something smaller?  I tried to use small images previously, but it seems simply push down and still cut.

  The full text of output must be "logged in as: username", but it is force into a small space and cutting the username like this:

  Connected

  as:

  username (this line is not visible in the toolbar)

  Here is my code.  Any help is appreciated.

  ...

  "< af:pageTemplate viewId="/oracle/ui/pattern/dynamicShell/dynamicTabShell.jspx "value =" #{bindings.ptb1} ' "

  ID = "pt1" >

  ...

  < f: facet name = "globalToolbar" >

  < af:panelGroupLayout id = "pgl5" layout = "horizontal" valign = "top" >

  < af:toolbar flex = '1' stretchId = 'stretch1"id ="tb1">

  < af:group id = "grp1" >

  "" < af:commandImageLink text = "' actionListener =" #{tabmanagement.dashboardSelected} "id ="cil1"icon="/images/AsIconDashboard.png "partialSubmit ="true"/ >

  "" < af:commandImageLink text = "' actionListener =" #{tabmanagement.toggleSelected} "id ="cil2"icon="/images/AsIconToggle.png "partialSubmit ="true"/ >

  < / af:group >

  < af:spacer id = "stretch1" width = "10" height = "35" clientComponent = "true" / >

  < af:outputText id = value = "#{tabmanagement.loggedInAsText}" / "loggedInAsOT" >

  < / af:toolbar >

  < / af:panelGroupLayout >

  < / f: facet >

  ...

  Move text output of the globalToolbar facet in the facet globalSearch fixed problems and gave me the results:

  ...

  Icon="/images/AsIconDashboard.png" partialSubmit = "true" / >

  Icon="/images/AsIconToggle.png" partialSubmit = "true" / >

  ...

  ...

• Dynamic tabs Shell Docs/tutorial

  I have spent a lot of time looking for documentation on this point - please prove me a retard and provide a link. Thank you!

  Trouble finding documentation is a lot of relevant links in the forum and maybe also point to the wrong location because of a recent migration of OTN. Redirects are underway with the OTN admins. Used, of course, like a band-aid until we can update all the links - manually.

  Meanwhile the method more reliable and perhaps the long practice of obtaining information on this model is to install the documentation locally as an extension JDev. It is very easy to do. Just follow the steps here:

  http://forums.Oracle.com/forums/Ann.jspa?annID=1272

• Transaction management in the ADF Application using Dynamic Shell

  Hi all

  I use Jdev 12.1.2. We have an application built using design pattern of Shell of dynamic user interface where each workflow in the application will open in a separate tab. So my question here relates by using transaction management in the workflow.

  I read in many places where we are asked to avoid always using "start new Transaction" as it would open multiple connection. But I also vaguely remember reading that best practices to use in an application built using by using Dynamic user interface Shell, is to have isolated Datacontrol with always start new Transaction.

  So could indicate the recommended approach for impact Shell of the user interface and the performance of the approach?

  Note: We have just a data control in our application.

  Thanks in advance.

  Hello

  the transaction is not defined by the shell of the dynamic tab but the workflow. The shell of the dynamic tab displays only the workflow at a glance. If you plan to display a single feed task several times as tabs in a dynamic tab shell, each indicating a different set of data, then you use "isolate" scope of data control or "adaptive databinding (https://blogs.oracle.com/groundside/entry/towards_ultra_reusability_for_adf). If you are using remote data controls then - if you use ADF BC - each instance of the workflow (in shell dynamic tab tab) creates its own connection to the base and the transaction. Workflow transaction parameters are passed to it.

  So use case issues: If you only display a single instance of a workflow tasks at once in a tab of the shell of the dynamic tab so that you can use the scope of shared control (default) data without doing anything. I however you must show the same workflow multiple times then reach isolated from control data or link Adaptive is the implementation, you should go for. The first option - data control isolated - is expensive because it creates additional database connections. There if its use cases.

  Frank

• ADF Dynamic interface User Shell showing blank tab for the workflow

  Hello

  Jdev 11.1.2.0.0

  I tried application UI standard dynamic tab Shell in my application. Each tab in my application a taskflow.

  If I enable the ADF security, my tabs are displayed as empty. I did added Grant resource task flow.

  But if I disable the security of ADF, the tabs are correct content display.

  Checked under forums
  https://forums.Oracle.com/thread/2393963
  https://forums.Oracle.com/thread/1023619

  I also tried adding project sample Patterns (dynamic tabs) as the jar.
  And by assigning the role authenticated blank.xml. His does not work. Always to the Virgin poster.

  
  Grateful for the help on this issue.

  
  Thank you.
  Abhijit

  Issue slipped. After having authenticated the role to

  Blank.XML and dynamicTabShellDefinition

  Refer

  https://forums.Oracle.com/thread/2393963

• Shell of the supplied user interface? Incompatible with Beta Guide

  Hi all
  
  I found a BETA guide dealing with a UI shell - http://www.orastudy.com/oradoc/selfstu/fusion/ doc.1111 /e15524/ui_impl_uishell.htm.
  
  Can't see in the different versions of the Jdev I have 11.1.4 thru to version 1.2
  
  I tried the new updates etc, and I again as the model of dynamic shell.
  
  Indices or that has yet to be officially released?
  
  See you soon,.
  
  Simo

  Hello

  is the model of shell dynamic tab exactly. Note that the Shell user interface model began as a model and then added to the product under the name of model Dynamic tab Shell JDeveloper

  Frank

  PS. : Beta documentation rarely remains the source of the truth

  Published by: Frank Nimphius, October 30, 2011 05:15

• Closed: Interface User Shell: Rename title of label or launch new tab for the scenario?

  Hello
  
  I use the dynamic model shell user interface. I run tab area containing TF for research of Navigation area. Based on the record we can do different actions including CRUD (assumed that this requirement would be very common).
  1. now based on how action can we change the title to label without refreshing the area inside.
  2 OR how to launch the new tab from within the region and then get back/back to the previous tab, we could do without contextual event or even not at all.
  
  Thank you

  Hi amseth,

  You can try this one: http://soadev.blogspot.com/2010/07/adf-ui-shell-updating-title-of-current.html

  Kind regards
  Pino

• Error UIShell/UIShellMainArea - oracle.jbo.JboException: identity store is null

  I get a ""oracle.jbo.JboException: identity store is null ' error in my web application from merger which is based on the UIShell and UIShellMainArea models. " I disassembled the application at a very basic level. The error is thrown when the data control is added and the showDetailHeader is toggled between releases/no disclosed (and other actions as well).

  The same or similar application without models UIShell/UIShellMainArea construction works very well. I tried it with Dynamic tabs Shell and other models with success.

  I'm on the R8, JDev version is 11.1.1.7.2 and I added the libraries required for the model/viewcontroller. Since this is a small application, I here enclose with a script to create the table/data used by the application.

  I couldn't find much of anything related to this Support of Oracle or other research online. Any help will be greatly appreciated.

  

  Yes, I can confirm that, you will get this error when your LDAP connection is not correct.

  To prove that I changed my LDAP server to a bad server so that the connection fails.

  JDev newspaper, I saw this error

  The rendered page, and when I fell ShowDetailHeader (Infact any PostBack) caused the exact error even to appear.

  And the stacktrace of the Exception in JDev journal is

  Caused by: oracle.jbo.JboException: storage of identity is null.

  at oracle.apps.fnd.applcore.pref.model.util.PreferencesUtil.getImpersonateeList(PreferencesUtil.java:832)

  at oracle.apps.fnd.applcore.patterns.uishell.ui.bean.GlobalAreaBackingBean.isImpersonateeListAvailable(GlobalAreaBackingBean.java:1650)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at javax.el.BeanELResolver.getValue(BeanELResolver.java:261)

  ... more than 68

  Hope this helps you.

• Returns the taskflow as fragment area.

  Hi all
  
  I would like to ask a question about the region, the workflow and its return value.
  
  I have a workflow task that I want to use it everywhere in my application. It shows a list according to its parameters, make users to check some of the values and return the values saved in a list. It has 4 input parameters and a return value (i.e. the elements of this appellant want). There is no problem when I use it inside taskflow operational-stream-call activity. But when trying to use it inside the fragment (popup) as a region (or dynamic area) I can't get the return value of my workflow. It's because I can't find a 'return value option' in a region.
  
  How can I get the return value of this workflow when I use it inside the fragment (or popup)?
  
  I searched this forum, google it and found nothing.
  
  JDev Version: 11.1.1.4
  
  Kind regards
  Youssef Mohamed Jawhar.

  Hello

  There are several solutions to this but, what you would expect does not work. You can define a bean managed in the workflow calling (put in sight) and pass it as input to the flow of the task parameter. In the workflow you change the bean managed before leaving the workflow. Then in the calling workflow, you access the bean managed to read the return value of it. This is the Dynamic tab Shell model how it with the context of the tab. This should work for you as well

  Frank

• uiShell in popup problem

  Hello
  I'm working on uishell and I encouting a problem that needs your help!
  
  Scenario:
  I have create a JSF page named "main.jspx" using Oracle Dynamic tabs Shell, a workflow ADF named 'first.xml' and a jsf page fragment called 'first.jsff '.
  On the 'first.jsff', I create a popup 'p1' and use 'AdfPage.PAGE.findComponent ('p1')' to call 'p1 '. It does not work. I searched articles on this subject, and I know I should be written as ' AdfPage.PAGE.findComponent (' xxxx: xxx: p1'). XXX State absoluteId. How can I write the absoluteId beacause "first.jsff" is not an id in "main.jspx". Can someone give me some advice? Thank you!!
  
  
  additional:
  
  If the popup "p1" is created
  on main.jspx, it works. But this isn't what I want.

  Hello

  You can try to identify your component customer id by viewing the source code of your page is displayed in the browser when running.
  You can also check out this blog for a lot of control: [http://soadev.blogspot.com/2010/02/adf-faces-rc-simple-but-robust.html]

  Kind regards

  Pino