ADF Dynamic interface User Shell showing blank tab for the workflow

Similar Questions

• Dynamic tab Interface User Shell - close the tab action & number of open tabs control

  Hello
  I browsed the forum, but could not get their hands on a concrete solution to the issue on how to capture the event action to close the tab and perform an action on this?
  The thread below about my question, but doesn't seem to have a good solution
  Re: Dynamic tab Interface User Shell: control icon close
  
  And another question, currently in the TabContext the number of open tabs is at the limit of 15. How can I replace only such that I do not allow more than 7 tabs open at the same time?
  
  Please help me with the two queries above. Thank you!
  
  Kind regards
  SS

  Sorry for the delay so much. Finally got some time to play with the model and by downloading the source code for dynamicTabTemplate and substituting the closeIcon worked like a charm.
  Let me summarize what I did to help someone who is looking for it :)
  (1) download the source code for dynamicTabTemplate
  (2) added and additional attribute to the model closeTab
  ++
  +closeTab+.
  +java.lang.String+.
  ++
  true
  ++
  ++
  (2) the dynamicTabShell.jspx edition, closeIcon commanlink actionListener to be linked to the "#{viewScope.tabContext.closeIcon}".
  (3) implemented the method of closeIcon in TabContext
  +@Override+
  + ' public void closeIcon (ActionEvent actionEvent) {+
  CloseIconInterface bean = getBean().
  bean.closeIcon (actionEvent);
  +}+
  (4) generated the jar.
  (5) delete the oracle supplied jar dynamicTabTemplate by default and instead added my custom pot generated on demand
  (6) implementing the new model
  (7) set all attributes with attribute closeTab. It would take the name of BackingBean... example:
  (8) xxxBean done to implement CloseTabInterface
  (9) implementation of the method closeIcon with custom code to confirm the page close prior to removal of the tab.

  However as you say, I will keep tab on the future updates of the default model tab updates fail bug fixes or improvements.

  Thanks to all those who have looked into this for me and I hope this helps someone else :)... Good luck!

• A challenge: combining dirty tab Interface User Shell + self-closing-BTF

  I find it difficult to use the facilities of the shell of the interface user ADF of the conduct of the stubborn self-closing-standalone task.
  
  What the Shell of the user ADF interface does well: in the Shell of the user interface, you can open a standalone BTF as an activity, and if the BTF closes itself (that is to say... given the user selects ok or cancel/close button, the BTF stand-alone navigates to a special return flow option), the BTF closes and the ADF UI Shell correctly closes the tab around the activity.
  
  My challenge is that I want to add installation tab 'dirty' shell ADF of the user interface for the task force, such as if the user inside the BTF selects a custom cancel/close button (not the Shell UI button close tabs) that accesses the task-flow-back option in the Working Group, they had the chance to confirm or cancel the closing via the ADF UI Shell dirty tab popup. (Note that task-flow-return options are crucial to BTF to self-latch because they not only allow the BTF of commit / rollback, as well as make them re-entering or playing with the functions of backup point).
  
  If the ADF UI Shell shellLauncher Bon we call method makeCurrentTabDirty on the opening of the BTF, activity of the BTF tab is italicized properly. Even if the user selects the BTF Cancel button, the BTF farm (she disappears in fact from the Shell of the user of ADF interface) but the Shell of the user activity tab interface is still visible, then watch the dialogue dirty tab, which is too late, the Working Group has already closed.
  
  So my solution is when the button close down BTF, before he navigates to the BTF task-flow-back option, I can get the ActionListener to the button close BTF to trigger an event that is contextual to the shell of the user ADF to capture interface "shut up" occurrence. The Shell of the user interface then has a chance to show the dirty tab dialog box by capturing the contextual event.
  
  Then, my sticking point is the class TabContext provided in the Shell of the user interface has no way to call the dirty tab dialog box without calling the removeTab method. It is not desirable for the Shell UI close the BTF as task-flow-return of the BTF activities must always be called... remember that they have an additional feature that is required for the BTF.
  
  Even if the TabContext method is a solution to display the dialog box dirty tab without closing the tab (TabContext is pretty easy to extend yourself if you have the source code), the problem to which I can't think a solution is, how to get the tab dialog box dirty to communicate with the BTF stand-alone version (yes/no) result such that it can take a decision on the abandonment of action close and let the user on the current page fragment, or accessing the task-flow-return node?
  
  We could suggest that I could expose the dirty to the BTF stand-alone tab dialog such that she could show the dialog box confirm himself. However the point being is the BTF is autonomous and should have no knowledge where it is used, in the Shell of the user interface or some other supershell application. Publish plans to close the BTF via a contextual event seems fine, but alternatively of loading in the components of the interface layer user seems to break the independent principle I-don't-know-or-care-about-what-my-parent-caller-is-doing BTF appears on the border of evil.
  
  Anyone pointers, suggestions or comments like you're-an-idiot-Chris,-do-it-this-way? Your help is appreciated.
  
  Kind regards
  
  CM.
  
  PS. JDev v11.1.1.2.0 with interface User Shell v1.02

  How to get the dirty tab dialog box to connect the result (yes/no) with the BTF stand-alone version, as it can take a decision on the abandonment of action close and leaving the user on the current page fragment or accessing the task-flow-return node?

  I hope that everyone interested in this challenge is useful the application at this link: http://soadev.blogspot.com/2010/08/loosely-coupled-bounded-task-flows.html

  Kind regards

  Rommel Pino
  http://soadev.blogspot.com

• Can not see the Spot Healing Brush Touch tab. Shows only the tab for the corrector.

  Can not see the Spot Healing Brush Touch tab. Shows only the tab for the corrector.

  Try right-clicking on the Healing Brush tool in the bar of the tool or SHIFT + J to switch tools...

  

• Want Firefox to save your tabs for the next time it starts?

  FF 27.0.1 on Linux Mint XFCE 16, up to date.

  I have my preferences set to "show my home page".

  Whenever I close FF with the X in the upper left corner, he gets up and asks me "do you want Firefox to save your tabs for the next time it starts? I check the box to ask next time and have tried both save and exit and just left. When I open the browser again, it seems to randomly decide to open all the tabs I had last time, or sometimes (rarely) just my home page tabs.

  I don't want to open all the tabs I had open, and I don't want the question whenever I have leave FF. I used FF for years with XP, but I am new to Mint.

  Done setting the prefs 'warnon' on the topic: config false page has an effect any?

  • browser.tabs.warnOnClose
  • browser.tabs.warnOnCloseOtherTabs
  • browser.warnOnQuit

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

• When firefox load it also load another tab for the search engine. How can I remove this where it will load only my start page?

  When firefox load it also load another tab for the search engine. How can I remove this where it will load only my start page?

  You can check the setting of the home page and make sure that it doesn't have a leak ' |'.

  Firefox supports several home pages separated by ' |' symbol.

  • Tools > Options > general > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

• How can I save my tabs for the next time I open the browser?

  In the previous edition (3.6.12) if I want to close my pc, I had the ability to save my tabs for the next time... I can't find this option in this version.

  Firefox 4.0 automatically saves your session when you close Firefox. Next time you open Firefox, click on the link of the Previous Session restoration on the default on: Home home page or in the menu of the Session previous restore point in the history of menu drop-down.

• I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I shouldn't

  I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I wouldn't reinstall anything, right?

  Hi Greg,.

  You won't lose any application on the computer.

  You can remove a user from the license and assign it to another user according to the help below document:

  Using creative cloud | Manage your creative cloud to the membership of the teams

  Kind regards

  Sheena

• dBV error on ASM DBV-00008: USER name must be specified for the OSM files

  Hello everyone,
  
  I'm trying to run the dbv command, but it displays error. In fact, I have the ASM diskgroup.
  
  [*[Oracle@portalnode01 ~] $ dbv file=+DGRP/orcl/datafile/example.258.806694223*
  
  DBVERIFY: Release 10.2.0.1.0 - Production on sea Mar 20 10:47:05 2013
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  DBV-00008: USER name must be specified for the OSM files
  
  Is where I'm wrong?
  
  Published by: 993776 on March 19, 2013 22:33

  993776 wrote:
  Hello everyone,

  I'm trying to run the dbv command, but it displays error. In fact, I have the ASM diskgroup.

  [*[Oracle@portalnode01 ~] $ dbv file=+DGRP/orcl/datafile/example.258.806694223*

  DBVERIFY: Release 10.2.0.1.0 - Production on sea Mar 20 10:47:05 2013

  Copyright (c) 1982, 2005, Oracle. All rights reserved.

  DBV-00008: USER name must be specified for the OSM files

  Is where I'm wrong?

  try to add the attribute userid to the statement.

  $dbv username = name of user/pwd file=+DGRP/orcl/datafile/example.258.806694223*

• Invalid value ', < user >, < cased-id >, and < module > ' for the caseId to the req parameter

  Hi all
  We sometimes get below error.
  Invalid value ', < user >, < cased-id >, and < module > ' for the in demand caseId parameter.
  
  What could be the cause of this error... ? I have my case id, the user and the modules case is valid.
  
  The application records gives following:
  
  ERROR com.oracle.determinations.web.platform.servlet.WebDeterminationsServletUtility - com.oracle.determinations.web.platform.exceptions.error.InvalidRequestError: invalid value ', USER1, 1-2LG5T, MODULES ' for the parameter "caseID".
  com.oracle.determinations.web.platform.exceptions.error.InvalidRequestError: invalid value ', USER1, 1-2LG5T, MODULES ' for the parameter "caseID".
  at com.oracle.determinations.web.platform.controller.SessionContext.validateRequest(SessionContext.java:575)
  at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.doPost(WebDeterminationsServlet.java:99)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
  at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1655)
  at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1595)
  at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
  at com.oracle.determinations.web.platform.util.CharsetFilter.doFilter(CharsetFilter.java:46)
  at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
  at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
  at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
  at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
  at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:932)
  at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:500)
  at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:178)
  at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
  at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
  at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1583)
  at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:455)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:384)
  at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:288)
  at com.ibm.ws.ssl.channel.impl.SSLConnectionLink.determineNextChannel(SSLConnectionLink.java:1016)
  to com.ibm.ws.ssl.channel.impl.SSLConnectionLink$ MyReadCompletedCallback.complete (SSLConnectionLink.java:639)
  to com.ibm.ws.ssl.channel.impl.SSLReadServiceContext$ SSLReadCompletedCallback.complete (SSLReadServiceContext.java:1772)
  at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
  at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
  at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
  at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
  at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
  at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
  to com.ibm.io.async.ResultHandler$ 2.run(ResultHandler.java:905)
  to com.ibm.ws.util.ThreadPool$ Worker.run (ThreadPool.java:1550)
  
  
  Thank you
  Fox
  
  Published by: PR on May 2, 2012 05:52

  Rajan,

  When preconfigure you a case, you must indicate the folder Siebel that you are planting prior information of. When you save a case, it is saved in the political table Automation Session, and the caseID reflects the recording of the session saved.

• no user key can be used for the instance of the component integration "Contact."

  I try to use the InsertOrUpdate method on the contacts. All I'm trying to add is a first contact name, first name, telephone number and the owner. Using InsertOrUpdate I get, no user key can be used for the instance of the component integration "Contact."
  
  I can use the Insert method with no problems. What Miss me? Why the InsertOrUpdate method will not insert it?
  
  Thank you.

  Hey... I also had the same problem into account.

  so I tried to give the ExternalSystemId. and it worked... It should work once you set the external id.

  Concerning
  Balaji Tr.

• Clear HOWTO #{securityContext.authenticated} when the user opens a new tab in the browser

  Hello world

  I use a template for my ADF Application, so I make the application menu depending on whether the user is authenticated or not, if the menu is not displayed in the login page and use a common template for all my pages:

  rendered = "#{SecurityContext.Authenticated} '"

  My problem is that the value remains, so I would like to know what is best practice to turn it off when the user opens a new tab, or maybe my approach is quite wrong?

  Thanks experts!

  Jose.

  Hello

  I changed the method, so I give the menu according to a 'login' property in a managed bean:

  With the corresponding accessor:

  public boolean isLoginPage() {}

  Var currentPage = FacesContext.getCurrentInstance () .getViewRoot () .getViewId ();

  If (currentPage.contains ("login")) {}

  return (true);

  } else {}

  Return (false) End Function

  }

  }

  Thanks for your help!

  Jose.

• View Connection Server Manager - column 'User' not showing not connected in the accounts to the inventory of a Fund of the pool

  Hello

  I am trying to identify the point of failure in communication between a pool of related clones and the view connection server - which prevents the management console to see if-and-who is connected to a particular linked clone VM.

  He showed the status of 'User' correctly in the past, but after several re-compositions and to implement a McAfee Firewall required on the connection server, composer and each Linked-Clone - it stopped. Windows Firewall is disabled machines.

  I spent some time already tuning firewall McAfee to enable all required traffic and services and everything works - it seems fair that he is unable to take inventory on the linked clones with regard to if someone is logged in one.

  I suppose that the Agent view handles make this info on the login server, but I can't seem to identify the communication which is apparently filtered, when everything else seems to work in the infrastructure of the view.

  I'm testing with the firewall turned off to see if I can get it working again.

  I have attached a perforated Cap where is the problem.

  Thanks in advance,

  Corey

  It may be a stretch but check the Userinit registry key located at HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogin.   You want to ensure that C:\Program VMware View\Agent\bin\wssm.exe is specified in this key as will facilitate the session/user information to the broker for the connections once connected.

• Date query shows no results for the date of the day

  Hello everyone. I use Jdeveloper 11.1.1.3.0 with ADF and I have a view named query with a single field, Date. The operator that he uses is equal to a value written in the field. The problem is that when I insert a line in the table (the date is automatically set to the current date on the insertion) and I'm looking for today it returns nothing. However if I leave the field blank it will find me the line. I tried to do this with the timestamp option, but it is not very user-friendly, the user will need to type in the time line was inserted to find, or use between it operator for two fields which is something I want to avoid if possible
  
  The requirement is a query field that allows the user to choose a date on the calendar and shows all lines that are inserted at this date (even if the date is today, and the line was inserted a few minutes before).
  
  Published by: Dino2dy on April 6, 2011 02:50

  Dino2dy,

  The best way to proceed would be just to add an additional attribute to your VO - use "TRUNC (your_date_column_name)" as the value for the attribute - then just compare this attribute in the named view criteria.

  John

• Why my browser won't allow me to open several tabs for the same website?

  I used to edit photos online and always opened five tabs of the site at a time, in order to expedite my editing. He opens the first tab very well and then when I open a second tab, it appears back on the first tab. I cleared my cache but that does not appear to have contributed. Any ideas?

  Try to disable "open tabs" setting:

  Tools > Options > privacy > address bar: when you use the location bar, suggest:

  History
  Bookmarks
  Open tabs