Dynamic with several Conditions when action

Similar Questions

• Index and MATCH with several conditions

  Hi all! I hope I can explain what I'm trying to do here clearly. This is my first shot:

  In the table below "Office entry Worksheet - area 1" I am trying to insert a formula in column B which will result in an answer ' true / false ' and be used for conditional highlighting

  

  The first condition that must be met is that the checkbox in the table "Labor and material Checklist" column A or check, if it is not checked, then move to the next line. If the box is checked, then the following condition would need to index and match with column C of table "Office entry Worksheet - area 1" in column B. If there is a match in column C, then move to the next line of column B in the table 'labor and material Checklist '. This continues until there is a 'match', then highlight column B in the table "entry Office sheet - surface 1" in red (or something like "MISSING task")

  It is an estimate and the idea is to ensure that the Phases that are checked in the table "Labor and material Checklist" will not miss when you use the table "entry office map - zone 1".

  Thank you very much for your help!

  Tim

  

  Is it possible that I can download this spreadsheet file?

• Error exporting in the level of query with several conditions

  When I run the following query to export with the result.
  
  
  
  C:\Documents and Settings\ITL > exp scott/tiger@orcl tables = (emp) QUERY = "" WHERE deptno > 10 and sal! 2850 = "' LOG = log011.log FILE = exp.dmp"
  
  Export: Release 10.2.0.1.0 - Production on Wed Jan 30 10:01:27 2013
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options
  Export performed WE8MSWIN1252 and AL16UTF16 NCHAR character set
  
  About to export specified tables by conventional means...
  . . export the rows in the table EMP 10 exported
  EXP-00091: exporting more than questionable statistics.
  EXP-00091: exporting more than questionable statistics.
  Export completed successfully with warnings.
  
  
  
  But when I run it with the following condition, then it displays the following error...
  
  
  
  
  C:\Documents and Settings\ITL > exp scott/tiger@orcl tables = (emp) QUERY ='"WHERE deptno > 10 and work!" = 'CLERK' ' ' LOG = log011.log FILE = Exp01.dmp.
  LRM-00111: no closing quote for value 'LOG = log01'
  
  EXP-00019: failure of the treatment of parameters, type 'HELP EXP = Y' help
  EXP-00000: export completed unsuccessfully
  
  
  C:\Documents and Settings\ITL > exp scott/tiger@orcl tables = (emp) QUERY = "WHERE deptno > 10 and work! = 'CLERK' ' LOG = log5.log FILE = exp01.dmp
  LRM-00112: multiple values not allowed for the parameter "query".
  
  EXP-00019: failure of the treatment of parameters, type 'HELP EXP = Y' help
  EXP-00000: export completed unsuccessfully
  
  
  Please suggest a solution for this.

  Hello

  Single quotes used for CLERKS are very probably the origin of the problem.
  C:\Documents and Settings\ITL > exp scott/tiger@orcl tables = (emp) QUERY ='"WHERE deptno 10 > and job!" = 'CLERK' ' ' LOG = log011.log FILE = Exp01.dmp.

  try to replace this
  C:\Documents and Settings\ITL > exp scott/tiger@orcl tables = (emp) QUERY ='"WHERE deptno 10 > and job!" = "REGISTRAR" "' LOG = log011.log FILE = Exp01.dmp.

  Two single quotes (no quotes) to place an apostrophe for CLERK.

  Thank you
  Padma...

• Find entries with several conditions, including the comparison

  Hello

  I take the edition of I v6.2.7 a ride, I'm looking at the use case is the following. I have a "table" with about 100 k records defined by this object:

  @Entity
  public class LTROW {
  
    @PrimaryKey
      private Integer id = null;
  
      @SecondaryKey(relate=Relationship.MANY_TO_ONE)
      private Integer tableId = null;
      
      @SecondaryKey(relate = Relationship.MANY_TO_ONE)
    private String col0 = null;
      @SecondaryKey(relate = Relationship.MANY_TO_ONE)
      private String col1 = null;
      @SecondaryKey(relate = Relationship.MANY_TO_ONE)
      private String col2 = null;
      @SecondaryKey(relate = Relationship.MANY_TO_ONE)
      private String col3 = null;
      @SecondaryKey(relate = Relationship.MANY_TO_ONE)
      private String col4 = null;
      @SecondaryKey(relate = Relationship.MANY_TO_ONE)
      private String col5 = null;
      @SecondaryKey(relate = Relationship.MANY_TO_ONE)
      private String col6 = null;
      @SecondaryKey(relate = Relationship.MANY_TO_ONE)
      private String col7 = null;
      
      private String result0 = null;
      private String result1 = null;
      private String result2 = null;
      private String result3 = null;
      private String result4 = null;
  // ...
  }
  

  Typical research I must apply is: give me all the entries contained in tableId X where the value of co0 is equal to 7, 1112 exceeds the value of col1 and col2 value is less than 8.

  I got in the definition of index for all columns defined in the class, but can't seem to understand how to combine these criteria. I looked at EntityJoin but it doesn't seem to be what I'm looking for.

  Thank you!

  You cannot use multiple indexes for this kind of query. Instead, create and use a single index for one of the conditions and filter on other conditions. I hear, by 'filter' select the records you want using an 'if' statement Try to choose the index that returns the smallest number of records.

  See:

  http://www.Oracle.com/technetwork/database/database-technologies/BerkeleyDB/performing.PDF

  -mark

• Conditional display with several conditions of PL/SQL

  Hi guys,.
  
  I want my chart to conditionally display 2 points, 1. a selection list is not null (TO_CHAR(:P7_DB_LIST)! = TO_CHAR (666)) and 2. the maximum value in a query is above a certain amount such as 2000. The idea is that I currently have a graphical display in MB. 40 000 MB is not something big to see so after a certain point, I want to display a graph in GB instead. So I want 2 graph both depends on the LOV is not null, but who need the value of the query less than 2000 and the upper.
  
  I don't know if its possible to have two parolees working together in one conditional display of the APEX (PL/SQL Expression)?
  
  Mike
  
  Damaged by: ATD on August 11, 2009 06:20

  Mike,

  Laughing out loud! Welcome to PL/SQL ;)

  Packages are not very difficult to get, but perhaps we should start over with a stored function a package... Here's the gist:

  CREATE OR REPLACE
  FUNCTION size_is_valid (
     p_svc_app      IN VARCHAR2,
     p_svc_app_name IN VARCHAR2
  ) 
  
     RETURN BOOLEAN 
  
  AS
  
     CURSOR max_size_cur
     IS
        SELECT max(size_mb) AS size_mb
        FROM [email protected]
        WHERE svc_app_name = size_is_valid.p_svc_app_name
           AND svc_name = size_is_valid.p_svc_app;
  
     l_max_size_rec MAX_SIZE_CUR%ROWTYPE;
     l_retval       BOOLEAN;
  
  BEGIN 
  
     OPEN max_size_cur;
     FETCH max_size_cur INTO l_max_size_rec;
     CLOSE max_size_cur;  
  
     l_retval := l_max_size_rec.size_mb > 500;
  
     RETURN l_retval;
  
  END size_is_valid;
  

  Then your new validation of test should be:

  BEGIN
  
     RETURN size_is_valid(:P7_DB_LIST, :P7_PROJ_LIST);
  
  END;
  

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen

  You can reward this answer by marking as being useful or correct ;-)

• If/Then with several Conditions

  I'd appreciate any help in getting this simple working code.

  I have two variables.  One with 7 options and one with 3 options. Depending on the selected combination another pre-determined value.

  The following code is an example of one of the combinations that I am using, however it doesn't seem to work at all, and I'm puzzled!

  If (this.getField("TICKET1").value == ' GENERAL (2011-2012 season ticket) "& & this.getField("TYPE1").value == 'ADULT') {event.value = 814.00 ;}

  The quotes around the 'TYPE1' and 'ADULTS' strings are not the right type. They must be like those used with the 'TICKET' and 'GENERAL... ". »

• "if" with several conditions statement?

  Here's what I'm trying to do:
  
  If ((condition1 == true) and (condition2 == true)) {}
  run this code
  }
  
  He compiled / worked fine in AS2, but it doesn't look like AS3 like them. I get the following errors:
  "Syntax error: expected rightparen before and.
  "Syntax error: rightparen is unexpected.
  "Syntax error: expected semicolon before leftbrace.
  
  What gives? Is this fixed before the final release?

  I do not know how it is managed in AS3, but I know 'and' is deprecated since Flash 5 in favor of &. see livedocs

• If statement several Conditions

  With the help of LiveCycle, FormCalc or JavaScript.

  I am trying to create an if statement with several conditions.

  a Sum field calculates a set of numeric entry fields. I want the result in the amount field to determine the expression in a final field.

  If the sum is < 30MM then '50000' also if the sum is > 30MM but < 60MM then '125000' also if the sum is > 60MM but < 100MM then "250000" also if the sum is > 100MM but < 300MM then '375000' also if the sum is > 300MM then "500000".

  I've been able to understand one so so for the first condition, but not able to include all the conditions and multiple results.

  Help would be much appreciated!

  
  Thank you in advance.

  Send your form to [email protected] and I'll take a look and see what is wrong.

  Paul

• Dynamic region with several task page fragment flow isn't refreshing VO

  JDeveloper version is 12.1.3 and Weblogic Server is 12.1.3.

  We have a dynamic region with several task page fragment flow.  We have created a menu that will open on the workflow task in the dynamic region. Before defining the workflow id in the bean, we execute query on the original Version after setting the bind variable. When we click on the menu is open the flow of relevant tasks in the region and showing the Original data table.

  But when we open the same request again to a different browser session, it shows all the data in the original Version when the user clicks on the relevant menu item...

  I have attached the code used to navigate to the different workflow tasks written in the bean from the back of the home page.

  We have no idea why anyone what happens, if it's a server problem or a code issue. Because unless and until we open the target application in a new browser it works fine.

  We tried and deployed on a remote server as well, but it gives the same question...

  Would be really grateful for the help...

  The user, the code you posted has some serious problems. Never, I repeat never store a reference to an application module in a static variable in a bean. That is why you see only data once. After that, the second session reuses the application module from the first to the configuration data, but to display data it uses a module different application.

  The way you try to configuration data is too bad. You must pass the parameters to the workflow and init data in the default action of the workflow instead of doing before installing the new workflow id. A workflow is a unit of work that is kind of a black box. You may not assume that the stuff you do outside of this black box can be seen inside the box. This is only true if the workflow share the same control of data as it's parent (share of data control).

  I suggest you read some documents on the workflow and how they work. A good start is to look at this video https://www.youtube.com/watch?v=A3CmDhWHaG0

  or work through this tutorial 12 c (12.1.3) Oracle JDeveloper tutorials - working with bounded task flows, regions and routers

  Timo

• I have a new laptop with windows 7 when I get on facebook games action lages and do not move smoothly there at - it something I need to download or modify to operate smoothly, it does only with games

  I have a new laptop with windows 7 when I get on facebook games action lages and do not move smoothly is something I need to download or change the settings to make it work smoothly, it does only with games

  burningbush,
  It can also be a problem with the game running through Facebook server.  I noticed a difference in great step lately with Farmville on Facebook compared to when I started playing.  You should check to see if it seems to be the same on the other PC.  I noticed the problem on several machines in different places, so I know that it was not limited to a PC.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Several conditional Actions required to Slide "on entry.

  I have a Captivate 7 file with a main Menu that contains 5 buttons that take users through 5 submenus. There are buttons that launch other project files on each submenu.

  On the submenus when a user performs a project file, the file closes and a variable puts a check mark on the top of the key to display this project is completed. Once a user makes all projects on a submenu, the button in the main Menu which directs user to the submenu then will have a tick on the top of the key to show the submenu is complete.

  This works well with many variables; standard actions on the buttons and a conditional action advanced on the "on entrance" for the slide.

  Question I have is that on each slide to make a Visual indicator that indicates the total percentage of full user (6 built images showing 0,20,40,60,80 & amp; 100). I created a conditional action that shows a relevant picture but my question is how to integrate only next to entry. Have you thought to use on output to show the image correctly on each slide, so that when the user visits a slide good picture - unfortunately it does not work.  Someone at - it ideas? Is it possible to drag on entry perform two separate conditional actions?

  Any great fully received help!

  You can put decisions as much as you want in a conditional to the progress of the actions. How much time do you have for now? All the statements in any fast action are always evaluated, which is not always the case in conditions in a programming language. Sequence is of course very important, both in the statements and decisions.

  Lilybiri

• Is there a way to open a new window with a site when the House on Firefox setting has several Web sites?

  When you work in Firefox, is there a way to open a new window with a site when the House on Firefox setting has several Web sites?

  Firefox always opens a new window with the home page (s), you must use shift + left click on a link (bookmark) to open a page in a new window or just rip an existing tab by dragging the tab slightly downwards to open the tab in a new window.

• I've used photoshop for several months when I login, I lost all my fonts and actions... it says that I have zero days left on my trial...

  I've used photoshop for several months when I login, I lost all my fonts and actions... it says that I have zero days left on my trial...

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• Help with a conditional action in C8

  Well, I'm trying to customize my Quiz results screen because I don't like the default navigation for the buttons to continue and resume the Quiz. So, I created two buttons using Smart shapes: one to resume the Quiz and one to continue. I moved the default button to continue out of the scene, since you can't delete it from the slide.

  When, when the learner can see the results, I want one of two things. If they did not pass the test (100%), I want only the recovery button to appear and to continue button, OCD and PlayBar is hidden. If they did the test, I want only that they see the continue button and recovery buttons to be hidden.

  (Some background on why I'm doing this: I have two places quiz questions in my project.) The first set of questions is intended only for the commitment and I so if the learner doesn't lack them no matter the value 0 points. The other set of questions is actually a series of boxes to click where the learner must complete certain tasks based on what they have learned. If I leave the default Retake Quiz results slide button, Captivate will take the learner all the way back to the first set of questions since you can only have 1 quiz per project.)

  So, I created a conditional, tip action to be executed on Enter to the Quiz results slide. It's the first time I tried this, and I must be missing something because when I publish the action proposed is not run properly. It is only to show the button continue, no matter what the score. I can't know if I use the wrong variable if I implemented wrong decisions, or if I should use the "Else" section (I have no idea of what Else is used to). "

  Screenshots below.

  

  

  

  Sorry, I did not in another thread on this subject? Do not disable the button continue, it is essential for the features of the slide to score, and that's what you're dragging it off the stage. Ditto for the button back. Why not hide one behind the other, at least to solve part of the problem.

  I may be wrong, maybe it was someone else. But I proposed to make the button continue invisible to the user and put a picture of model on top to make it look like a button. And make sure that the visible image.

  Then, you use the variable system badly IMO. cpQuizInfoQuizPassPercent is a static value that you specify as a criterion in the Quiz settings. You don't need to use cpInfoPercentage?

  System variables in Captivate 6 - Captivate blog

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.