Dynamically change number of records displayed in the block to the runtime

Similar Questions

• number of records displayed

  Hi all

  I have a report, each page has a number of records, but there is a space at the bottom of the page,

  I want to fill this space with records? How to do?

  How maximiza the number of records displayed?

  I tried the property of "maximum entries displayed" the extensible framework, but in vain,

  When I try 15 works, it shows 15 records, but when I try 30, it displays over 15 discs but not 30?

  Why?

  Thanks in advance

  Thank you

  the problem is that the margin should be extended to the bottom of the page.

  and by replacing the portrait report

• Several records displayed on the form to a time-2 lines for each record

  Hello
  I have a Web in which I want to display to 8 records at the time, in the data block, I've specified 8 as value "number of records".
  However, the record includes too many fields to display on 1 vertical line, I wish so to divide the fields into two separate lines, there will always be 8 folders, but each in two lines.
  How do I do that?
  I use form 10g. The block is a block of database using QUERY CLAUSE, and the canvas is stacked.
  Thank you

  Sandy,
  You will need set the 'Distance between Records' property for each item in the block for multiple registration. This will increase the space between the lines, so you can stack them in two rows. Unfortunately, you cannot set this property to the block - so you must set for each display element.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Can I get the total number of records that meet the conditions of a query using the Table API?

  Hello

  A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

  
  

  Can I get the total number of records directly meets the conditions of the query?

  I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.

  Can I get the same results using the Table API?

  I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

  Hello

  Counting records in a database is a tricky thing.  Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained.  Such a count is a problem of performance in addition to competitive access problem.   The problem is even more difficult in a system widely distributed such a NoSQL database.

  The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation.  This is how you must do this within the API.  There is not a lot of code, but you have to write.  You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines.  Just one iteration and count.

  If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

  Kind regards

  George

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• Change is not correctly displayed in the develop Module

  When I make a change in the develop Module, changes are not correctly displayed in the main window and the browser window becomes gray. When I get back to the library Module, the changed image appears correctly. Then when I get back to the develop Module, the changes appear correctly. I followed the troubleshooting steps and a single point Adobe says that the permissions of the user is perhaps not good. I created a new user, and in the new user profile, LR works as it should. I use Windows 7. What should I change in the old "user permissions" to match the new "user permissions"? I prefer to delete the new user, rather than recreate my environment all over again.

  If you see gray windows to develop, it is almost generally a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you do not have a calibrator, try to go into the properties of your screen pane. Go to the color management tab and remove any profile associated with the parser.

• How to get the number of records printed for the report in the dashboard

  Hello
  
  I would like to get the number of records printed at the bottom of each report as dashboard:
  < 1-25 of 6300 > instead of < 1-25 >
  
  Any help is appreciated
  Concerning
  B

  Hello

  Check out the blog of Miky Schreiber;

  http://www.miky-Schreiber.com/blog/permalink, guid, e964552b-eb6e-449b-b2c6-42adea2376cd.aspx

  Good luck

  Daan Bakboord
  http://obibb.WordPress.com

• to find the number of records retrieved in the select statement in the cursor

  Hi all
  with the cursor, I'm selecting select statement together and writing in the .txt file.
  his worksheet, but it should not open the file, if the cursor returns nothing.
  How to find the number of records returned by the select statement in the cursor.
  pls help me.
  
  Thank you...

  Don't understand what you're trying to say, but maybe it's...

  DECLARE
     vCounter NUMBER;
     -- Other variables...
  BEGIN
     vCounter:=0;
     FOR .. IN cursor LOOP
      IF vCounter=0 THEN
        -- Here open file...
        -- Here write one time data...
      END IF;
      -- Here write cursor data...
      vCounter:=1;
     END LOOP;
  END;
  

  -Clément

• Unable to get the total number of records processed by the processor of trade rules

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

  
  To illustrate:
  Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
  10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).

  In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.

  This is why the expected output will be:
  Success of failure
  Rule 1:7 (10-3) 3
  Rule 2: 1 (10-1) 9
  Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.

  I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?

  In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?

  Staging table
  Success of failure
  1 9

  Exception table
  Single ID ID rule
  Rule 1 Record1
  Rule 1 Record2
  Rule 1 record Record3
  Rule 2 Record1

  Exception table with: staging Table data merge
  Rule ID ID Unique Pass Fail Total
  Rule 1 1 9 10 Record1
  Rule 1 1 9 10 Record2
  Recording rule 1 Record3 1 9 10
  Record1 rule 2 1 9 10
  
  Please notify.

  Hi Jason,

  The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

  -Mike

• Change date format is displayed in the email

  I use the following script to customize the layout of a form e-mail:

  var oDoc = event.target;

  oDoc.mailDoc ({}

  bUI: true,

  cTo : " [email protected] ", "

  bassujetti: "new form of CCR presented on ' + CurrentDate.rawValue + 'by' + teamLead.rawValue,.

  CMSG: teamLead.rawValue + "has submitted a new form of application for review of a change." + "" \nPlease review and complete section of the assessment of the Impact and if it is approved, submit to the Manager more approval.\n\nREQID: "+ REQID.rawValue +" \nDue Date: "" + dueDate.rawValue + "\nPriority:"+ priority.rawValue,»

  });

  It works very well and formats the email as expected, the only problem I have, it's how the date is displayed in the email. The CurrentDate.rawValue in the subject line shows how I want that he, for example, 02/17/15, but the dueDate.rawValue displays in 2015-02-17, even if the parameter of model in the mm/dd/yy paper and appears correctly in the form itself. No idea why the date changes its display model during the generation of the e-mail and how to fix it?

  Hello

  I dunno if that could cause a problem, but the two fields have a display and change the model?

  Sometimes, an error is caused because there is no reason to alter date fields...

  Otherwise, you might also have the view model you want to view in the mail for the two fields and have the formattedValue instead of the rawValue

  Hope this helps

• Can I change Clips Audio waveform display in the timeline panel to resemble CS6 in CC?

  I just changed my CC of CS6, and I don't like how waveforms of audio clips in the timeline panel look in creative cloud. in CS6 is show the waveform centered in the clip, but CC, he seems to have cut in half.

  I have change a scripted show and have the Visual cues when a line starts and stops was incredibly useful. It was very clear in CS6 because I could see peaks and valleys very easily.

  Can I change how the waveforms of audio clips in the panel mounting back to the way it was at CS6? I want it to be centered in the clip and not cut in two.

  Thank you

  Click on the drop down the timeline and uncheck corrected Audio waveforms.

• BEEP and Siebel: limit the number of records displayed in a table

  Hi all
  I use BEEP with Siebel. For example, my XML has a set of 50 activities. These activities are of a different type and different date. Now, I want to show:
  
  5 activities the newer type A in a table.
  5 activities the most recent type B in another table.
  5 activities the most recent type C in another table.
  
  I tried using the position() method, but since I use the same set of activities 3 times it will not work. The reason is that after you sort the activities in descending order of creation date, I could end up having 5 recent activities of type A digit 4, 9, 17, 23 and 31. That's why I can't use <? If: position() < 6? >.
  
  The 'worst' solution would be to create a link of multiple values in Siebel for each type of activity and prior filtering of activity types in the object link, so I could use the solution above to limit the records per table. But it is really more practical in my opinion.
  
  All welcome ideas on how to do this inside the model.

  If you couldn't do something similar to this in your model:

  <=5]?>

  If you wish, send me the sample xml data and a RTF file to [email protected] and I can take a look.

  Thank you!

• Change number of four digits in the tables to a single number four?

  Using LabVIEW 2010, is it possible to change a whole four-digit (DBL, SGL, whatever) in an array of integers to a figure four, of the same type? Wasn't sure if there was a way to extract a number of thousands place, hundreds place, etc...

  -Ian

  Rest of quotient (math modulo) in a loop for using 10 as the denominator autoindex the rest out of the loop, loop 4 x.  There are many quick ways to do this.

• Body CC - change of automatic recording location once the project is put in place

  Been charged research, have not found an answer. I know how to specify a location for the automatic backup files when you create a new project. How can I change them once the project is turned on?

  To change the setting for automatic backup project:

  1. open the project.

  2. Choose file > project... settings > disks work > automatic backup of the project.

• page apex_admin not display for the runtime environment and application deployment using command-line

  Hello

  I installed APEX 4.2.6 EPG on Windows 7 Professional (32 bit) with Intel Core i3 processor.  Oracle XE 11.2 Win-32 DB.

  All the installation steps followed according to the Installation guide for the Apex.  It is a fresh and new installation.

  

  Install the log shows below -.

  Thank you for the installation of Oracle Application Express.

  Oracle Application Express is installed in the APEX_040200 schema.

  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;

  GETHTTPPORT

  -----------

         8082

  I did only the installation of runtime using apxrtins.

  ' Step ' grant of privileges of connection "according to the document was smooth without any problems.

  SQL > ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 20 scope = both;

  Modified system.

  SQL > ALTER SYSTEM SET SHARED_SERVERS = 5 SCOPE = BOTH;

  Modified system.

     

  I played "Creating a workspace manually" and met above question.  For installation of runtime, is this unnecessary step?  Or any other step I'm missing?  Help, please.

  Thank you and best regards,

  -Anand

  Hi Anand,

  anand_gp wrote:

  All the steps I did in my development environment and no problem following the steps.  And there is no question of the problem of the EPG or a bad image of loading because the other workspaces and applications out there are working well.  My question was, when I tried to copy an application via command line in an another 'new space and work with some new application ID', wheather my steps were correct?  If so, then why does not using the URL of the application.  And since it is in full flight development environment, where other workspace / applications work fine, how to connect to the new workspace I created using the command line?  If you look at my steps, I did provide any user name and password associated with this workspace all in creation.  When all this is going very well, so I will try in my new machine that has only run-time environment.

  Thank you

  -Anand

  I think you missed the validation part. You're going to make after the installation of the application as well as the addition of workspace

  commit;

  Hope that solves your problem.

  Kind regards

  Jitendra