Dynamically create a single charger

Similar Questions

• When dynamically created variables are emptied in the sequential process template?

  I have a sequence TestStand 2014 in which I dynamically create and fill many FileGlobal variables in the installation section of my main sequence.  I have it using the TestStand API to read the data in an Excel file (the data consists mainly of thresholds, limits, etc.).  The methodology itself works flawlessy.

  However, there are differences in behavior when using entry points both execution of the sequential process model.  When you use the entry point of execution 'Single Pass', he has no problem in test a DUT after another.  However, when you use the entry point for execution "Test DUT", I encounter the following error after completing of DUT1 and DUT2 testing:

  An error occurred the call 'InsertSubProperty' in 'PropertyObject' of 'NI TestStand 2014 API.

  The name of the element "VariableName" is not valid because it is already in use.

  I interpret this error message means that the variable I am trying to dynamically create the DUT2 track is already present race of DUT1.  I have a few questions about this:

  1. at what point in the sequential process template are dynamically created variables flushed, such as run a further by using 'Single Pass' starts with a clean slate?

  2. is there a reminder that I can substitute such as variables to rinse after each HAD run, allowing me to dynamically create variables on each HAD, during execution using "Test UUT?

  3. better yet, is there a counter of TestStand I can query to determine if I already ran DUT1 when using "Test DUT", such as DUT2 uses the variables that were created dynamically on trail of DUT1?

  Or you can simply use the PropertyExists function as a precondition.

  PropertyExists ("Locals.Foo")

• Dynamically create headphones...

  Hello

  I have an external swf that I load into Flash and try to achieve communication between the swf file and the charger of the parent.

  In the external swf file, I have a series of events, they are preparing based on that frame the user is enabled, i.e.:

  dispatchEvent(new Event("1"));
  dispatchEvent(new Event("2"));
  dispatchEvent(new Event("3"));
  

  I am trying to create a generic listener function that will add several eventListeners to the scene based on an arbitrary number that will listen to turn for the events that they are preparing the external SWF, as follows:

   function ListenForNavFromExternalAsset(sectionLength:int):void
  {        
      for(var i:int = 0;i<sectionLength;i++)
      {
          var screenNum = '"' + i + '"';
          stage.addEventListener(screenNum, NavToScreenFromExternalAsset, false, 0, true);
          trace(screenNum);
      }
  }
  

  I can see followed by the screen, so I know that the service is running.

  However, clearly, the events are not added to the scene because I never see the traces below, even if the external swf is no doubt sending its events:

  function NavToScreenFromExternalAsset(e:Event):void
  {            
      trace("ADDED_TO_STAGE");
      if(e == Event("1"))
      {
          trace("NavToScreenFromExternalAsset: ONE");
      }
      else if(e == Event("2"))
      {
          trace("NavToScreenFromExternalAsset: TWO");
      }
  //etc..
  }
  

  There must be a better way to do what I'm not aware of, I had a lot of success in the past using dispatchEvent and capture the event, but I don't know how to dynamically create headphones and listen to a dynamic channel.

  If anyone can suggest a way forward, I would be much obliged.

  Thx for reading,

  ~ Chipleh

  Hi Ned,.

  Thank you very much for the reply and oooh, it looks nice, I'll put it in my Pocket Flash for future use.

  After a lot of writing and rewriting and realize (as usual) I was overloading the question, I came up with it, that solved my problem:

  In one of my functions running, I create the number in which I want to listen to

  Add it to the event listener

  for (var i: int = 0; i<>

  {

  var thisScreen:String = String (i + 1); ([/ /, false, false, 1]);

  addEventListener (thisScreen, NavToScreenFromExternalAsset, true);

  }

  Then in the event listener, I get the event type, apply it to my screenCount variable,

  my function call and I'm good to go

  function NavToScreenFromExternalAsset(e:Event):void

  {

  screenCount = int (e.type) - 1;

  DisplayLessonScreenContent();

  }

  However, that being said, the custom event class that you posted is much more elegant, where the solution is just a simple hack. Anyway, thanks for your message of Ned and a lot of satisfaction to you, my friend.

  ~ Chipleh

• How to dynamically create variables of StationGlobals who are LabVIEWIOControl

  I'm looking for a way to dynamically create variables StationGlobals LabVIEWIOControl.  I know not how to create variables through "PropertyObject/SetValXXX", however I have some difficualty create variables that are custom data types.

  Thank you

  Bryon

  Bryon,

  You can use an expression as follows:

  StationGlobals.NewSubProperty("MyVariable",PropValType_NamedType,False,"LabVIEWIOControl",0)

  I hope this helps!

• dynamically create and destroy the custom menu item

  I have a standard TestStand platform that I use on multiple systems.  On some systems, I have a few sequences of calibration and I would like to have the Update menu to have the RunSequence of these sequences of calibration.  I know how to manually create these menu items, but they are no longer valid for some sequence files.  I would use the sequence SequenceFileLoad to dynamically create menu items and the SequenceFileUnload to destroy these menu items.

  I've played around with the API, but cannot determine the correct path to get to the create and destroy the custom menu items.  Does anyone know how this can be done?

  Thank you

  Matthew

  Yes, see the online help for the members of the following APIs:

  Engine.GetEditTimeToolMenuItems

  EditTimeMenuItems

  EditTimeMenuItem

  Basically, you get a collection of tool using Engine.GetEditTimeToolMenuItems () menu items and then call EditTimeMenuItems.Insert () or EditTimeMenuItems.Remove (). If you insert a you get returns an EditTimeMenuItem object on which you can change the settings.

  In addition, since it has an expression to hide items in menu tool, you need not necessarily to destroy, you can hide them instead.

  Hope this helps,

  -Doug

• How to create a single VI accepting several input type definitions?

  Dear users,

  How to simplify (or change) the following code for better overview and maintenance:

  

  The structure on the top is a code handle my cluster (uninteresting code is blocked). On the bottom, there are clusters of several type defs, which I use. So, I have created several subVIs to accept my pile of type defed (all together 4 pieces). I link all my subVIs in a single polymorphic VI and use as desired. In all of my subVIs, I change the elements of the cluster in the same order.

  But when you change the code of the subVIs, I need to change the code in the other subVIs, too. Is it possible to create a single VI who will accept multiple clusters of type defs?

  Thanks for listening!

  See you soon,.

  What I would do, is go back to your configuration polymorphic and transform any code which is common proximities different polymorphic cases in a Subvi.  Then just edit the subVIs.

• Time of design and of the dynamically created controls

  I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

  I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

  In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

  Hi JC,.

  I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

  I hope this helps, JC.  Have a great day!

• How to dynamically create action item?

  Hi, I want to dynamically create point.

  Before I want to create using qml, but does not seem possible

  http://supportforums.BlackBerry.com/T5/Cascades-development/how-to-create-action-item-of-page-dynami...

  So maybe better to use C++ to create dynamically,

  I'm already try but are still not

  So I have a custom control qml (a Navigation pane)

  name List.qml

  the structure is like this:

  NavigationPane {}

  {Page}

  objectName: myPage

  {Of container

  ....

  }

  }

  }

  How to add action item to this .qml?

  I'm already try that, but failed

  C++ :

  Engine QDeclarativeEngine;

  QDeclarativeComponent component(&engine,QUrl::fromLocalFile("List.qml"));)

  QObject * object = component.create ();

  Page * myPage = object->findChild ("Edit");  Maybe, on that note, I'm wrong implemented? -> not found?

  ActionItem * action1 = ActionItem::create () .title ("first action");

  my page-> addAction (action1, ActionBarPlacement:nBar);

  Remove the object;

  How to create this dynamic Action item?

  Help, please

  Thank you

  Hello

  QML, the object name must be included between "" marks.

  Name of the object of your Page will be:

  objectName: "myPage"
  

  You can reach any CPP QML object like this:

  This excerpt comes from YourProjectName.cpp

  // create scene document from main.qml asset
  // set parent to created document to ensure it exists for the whole
  // application lifetime
  
  QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  
  //and here comes the findChild method
  Page* qmlPage = root->findChild("myPage");
  

  After this, you can create any object on the side of C++ QML, as your own code:

  ActionItem* action1 = ActionItem::create().title("First action");
  myPage->addAction(action1, ActionBarPlacement:nBar);
  

  Don't have no need to create a QObejct, or declarative stuff.

• Dynamically create QmlComponentDefinition objects in the code

  With QML sample:

  // --- main.qml ---Container {    objectName: "fooContainer"    attachedObjects: [        ComponentDefinition {            id: barComponent            source: "Bar.qml"        }    ]}
  
  // --- Bar.qml ---Container {    objectName: "bar"    Label {        text: "FooBar"    }}
  

  I am trying to dynamically create barComponent objects and add them to fooContainer in C++ code.

  So I reference the using fooContainer:

  fooContainer = createdRootObject->findChild("fooContainer");
  

  But how to reference the definition of QML barComponent to use his method createObject()?

  The definition of the element is used to create the object of QML

  To create the C++ object, you need to do:

  qml = QmlDocument::create("asset:///Bar.qml");
  Control *root =  qml->createRootObject();
  fooContainer->add(root)
  

• How much data may be a handful of single charge

  Hi where to find information or tests on the average of the data that can be sent and received in a BB with a single charge...

  I need to know if the BB are good for an application that will probably be used for 10 hours straight without recharging...

  This looks like some sort of encryption and authentication mechanism.

  The content of the data seems small.  I also thought that the Blackberry battery would last 1000 communications too.  So I think that you have a good chance to get it in a day of 10 hours without a refill.

• Create the single '. " ALX "file of multiples. ALX file?

  Hi guys,.

  Is it possible to create the single '. " ALX "file of multiples. ALX file?

  If possible, please let me know.

  Thanks in advance,

  Yes, it's easy to do.

  Just add several files to the

  Element.

• Handling dynamically created components qml in C++

  Hey,.

  I dynamically create a qml page by using the following code:

                  onClicked: {
                      var favPage = favPageDef.createObject();
                      nav.push(favPage);
                  }
                  attachedObjects: ComponentDefinition {
                      id: favPageDef
                      source: "FavPage.qml"
                  }
  

  I would now like to manipulate the components in this new page qml in c ++. How to access these components?

  I was able to access the qml components fairly easily if they were created during the initialization of the application, but of course, this isn't the case.

  I discovered what the problem was. I had to do my public AbsractPane in my header file. Then when I created the qml component and calls a function in c ++ it turns out to be a child. Thanks for everyone help well.

• dynamically create files (.txt/.doc/.css etc.) and save the table as BLOB without file system reference

  Hi guys,.

  IAM trying to find a plsql/pkg process that creates a file for example myiphones.txt (with content) and save this file as BLOB directly in a table in the DB (not on file system moreove there is no access to the file system) - Ive studied this but nothing about other than as_pdf3 that iam still working on.

  Here are the summarized steps:

  -------------------------------------------

  1. run plsql to create a single file like myiphone.txt,

  2. in this (myiphone.txt) inserts a record content from another table EMP as,

  MYiPhone.txt

  ============

  Greg Taylor,

  Mike Owen

  3 then finally record this (myiphone.txt) in another table MYFILES as BLOB - Note Please that I don't want to not refer to file system manager and I have not access to it for the time being,

  I hope it is clear

  no idea about the way to handle this is appreciated?

  Thank you.

  You can try this:

  Data are from a clob table.

  DECLARE
    L_BLOB BLOB;
    L_CLOB CLOB;
    L_DEST_OFFSET INTEGER := 1;
    L_SRC_OFFSET INTEGER := 1;
    L_LANG_CONTEXT INTEGER := DBMS_LOB.DEFAULT_LANG_CTX;
    L_WARNING INTEGER;
    L_LENGTH INTEGER;
  BEGIN
  
    -- create new temporary BLOB
    DBMS_LOB.CREATETEMPORARY(L_BLOB, FALSE);
  
    --Select CLOB
    SELECT CLOB_VAL INTO L_CLOB FROM MY_TABLE;
  
    -- tranform the input CLOB into a BLOB of the desired charset
    DBMS_LOB.CONVERTTOBLOB( DEST_LOB => L_BLOB,
    SRC_CLOB => L_CLOB,
    AMOUNT => DBMS_LOB.LOBMAXSIZE,
    DEST_OFFSET => L_DEST_OFFSET,
    SRC_OFFSET => L_SRC_OFFSET,
    BLOB_CSID => NLS_CHARSET_ID('WE8MSWIN1252'),
    LANG_CONTEXT => L_LANG_CONTEXT,
    WARNING => L_WARNING
    );
  
    -- determine length for header
    L_LENGTH := DBMS_LOB.GETLENGTH(L_BLOB);  
  
    -- Your custom INSERT INTO statement
    INSERT
      INTO MY_TABLE
       (NAME,
        BLOB_FILE,
        BLOB_LENGTH
       )
       VALUES
       ('lala.txt',
        L_BLOB,
        L_LENGTH
       );
  
    EXCEPTION
    WHEN OTHERS THEN
    DBMS_LOB.FREETEMPORARY(L_BLOB);
    RAISE;
  END;
  

  Concerning

  Tobias

• Creating a single multi-page PDF file turns out to be... hard...

  Hello world!  We are a small company and we try to do our monthly billing.  We have four distinct (empty) State Agency bills that we contract, and we got them all filled out and ready to save as PDF.

  We want to create a single PDF file that includes all four completed pages.  When combine us them into a single PDF in Acrobat, it processes the information from the first page and any information on the other three pages, replacing all the original information.  We have not even a warning us saying that this will happen, so that we know what happens deliberately.  Why?

  As a solution to this problem very strange and unstoppable, we tried to create a '' portfolio '' with all four sides.  But there is apparently no way to then save these four pages in PDF regular and unique.  We can save it as a PDF Portfolio and that they are beautiful, but we do not know if the Agency has the ability to view the PDF Portfolio.  We have tried to look at one of these PDF portfolio with the standard Acrobat Reader and that the software won't load even.  Google Chrome also not opens it, recommending that get us Acrobat Reader CC.

  It has also been suggested that we try an online program called Pdfmerge.  Pdfmerge merge all of our documents into a single PDF file, which is excellent!  But when you try to display it on any other program, you'll find that all fields on all pages except the first page... empty...

  We want to just ordinary, standard, simple PDFs here, with several pages.  My research on that led me to the conclusion that I'm not the only one frustrated by the lack of simplicity to do something so... simple.

  Why the program would tell us, ' well, since all the fields on all of these pages are the same, we have decided to take all the info from the first page, delete all your other pages and then basically to create copies of the page one. " While never, EVER would be a necessary thing or practice?  «I need to create a PDF file with 50 pages, all the same exact page.»

  
  Help out me here!

  It happens because your bills contain form fields and fields with the same name in a single file will always be the same value.

  The solution is to flatten the files before their merger, converting the fields in the form of static content.

  If you have Acrobat Pro, then you can do it by using a simple gesture. Otherwise, you will need to do each file separately.

• Creating a single page square in Muse?

  I Muse is trying for the first time and am love him until now, but I would like to know if it is possible to create a single square page which doesn't scroll and can scale up to the size of the browser as a page with no scroll bar, exactly as the way in which a WebGL would scale, example: clouds

  Keep the shape the size of browser window without creating a scroll bar. I don't mean to actually put a WebGL element in my page as I would like to make a standard HTML5 page with that wide style, is there a way to do this in the Muse?

  Thank you!

  Method 1) be used for the background fill of browser image. To position the rest of the content is necessary to write a custom css

  Method 2) superhero Widget for Adobe Muse by MuseThemes