Create the single '. " ALX "file of multiples. ALX file?

Similar Questions

• Create a single pdf document from multiple scans of a doc to double-sided printing. What is the simpler, faster way to rearrange the pages in their correct order?

  I am currently trying to create a single pdf file of several analyses of groups of pages in a document of front and back of the page. The manual is about 80 pages and I didn't scan each page regardless. Is there a way to move pages once they are all together in a single pdf? All odd pages are in order. However, two other analyses allowing same abd pages, they are at the end after the odd pages.

  Open the Pages panel on the left and you will be able to drag and drop the

  thumbnails of page around.

• How to use aggregator to create a single swf file from multiple files

  Hello world

  I'm working on the customer requirement where I have to create a 2004 SCROM video base. Its basically a PPT inside the captivate file. And it has about 175 slides in the file. Some of the slides have animations, voice-over. I am facing a problem in the EDITING of the file in the single SWF file format. Whenever I publish the slides as SWF, it creates several SWFs, the skin of the player and other manifest, Scorm 2004 Swf files.

  I only want one single SWF file in which all slides must be indicated on it. Do not know, why it's happening? I tried aggregator for this also, but it didn't work... The Skin.swf added easily and do not add any other files. It shows me an error: "Name.swf is not a Captivate AS3 file...". »

  I'm new on this. Please help me because I have a very short time to do this.

  Thanks and greetings

  It was a little hitch - now resolved. Get an output in a single SWF file. Just removed the check mark the option publish settings "Enable SWF for the conversion of i-phone application.

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Error message: cannot copy... Failed to create the directory or file.

  I get the Error Message ' cannot copy (a file USB Store n Go): failed to create the directory or file.»  All of a sudden I started getting error message is when I tried to copy to the USB mass storage: "F:" copy on the removable key worked for a proor very long in this message. And there are a lot of empty space.  The diagnosis says that everything works correctly.

  Dear Clarence

  Try first to unplug the mass storage device, then reconnect and format it by Righ click on Format.

  Then try to paste these files on this USB key again.

  If it fails this time then format your USB using HP USB stick formatting to http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I23839 tool

  Click Download on the page above. Install it and run it. This will guide you through the steps of formatting your USB drive in a few seconds...

  It is also useful for the repair of the almost dead usb keys.

  Concerning

  Zeeshan Ahmad

• Problem steps Recorder error - you have not permissions to system files needed to create the specified output file.

  I am trying to use the PSR as a domain user, but get the following error message when you try to save my record:

  "You don't have permissions of system files needed to create the specified output file.
  If I run the present when logged in as a domain administrator, I can record without problem.  But when logged in as a domain user, I get the error.  I tried "Run as Administrator" as well as "Run as different user", enter the domain administrator credentials, but still get the error.
  Everyone knows about this problem?

  Hello Giblits,

  Because the computer is connected to a domain, it would be better on the TechNet forum. I suggest you post your question on the following link to get the exact resolution.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Generate image (for iOS app) in assets could Photoshop create the contents.json file at the same time?

  Generate image (for iOS app) in assets could Photoshop create the contents.json file at the same time?

  Hi iolnation,

  I'm sorry, but currently there is no such feature available in Photoshop.

  However you can surely place the feature request here: Photoshop community customer family

  Concerning

  Jitendra

• Unable to create the new domain file

  Hi experts

  I am trying to create the new domain file, but there is no success.

  Tools-> domain Administration > file-> Select

  When I choose, the dialog box open typed the new name for file field, you click Open.

  the error message is "mydomains.xml is not a domain file.

  Please tell me how to create the new domain file where you will store the areas associated with my project.

  Thank you

  Hello

  With the dialogue of the Administration of the areas, you modify xml with the areas. You cannot create a file or assign the file with the fields in given the design from there.

  Documentation:

  SQL Developer Data Modeler does not include the default domains file.

  To create new field definitions, select Tools > areas of Administration and click Add to create and add your own domains. These areas are added to the default value of the file, defaultdomains.xml, and can be used for all your projects.

  The file is located in /datamodeler/types/defaultdomains.xml

  Basically, you should

  1. create /datamodeler/types/defaultdomains.xml if it does not already exist

  See Tutorial: modeling of data for a small database

  2. create some (open) design and import file fields to file-> import-> areas

  3. after that study is registered again Directory /domains with design level domains file inside the tree of creation will be created.

• How to create the listener.ora file

  Hi all
  
  My emca start dbconsole... successful because I do not have in network/admin listener.ora. My interlocutor only runs on the default config
  
  I can't run gui netca bacause I connect only remotely using PuTTY.
  
  I want to run in silent mode netca to create the listener.ora file... can you give me response.file of the sample for netca?
  
  
  Thank you
  
  Published by: yxes2013 on 3.5.2013 04:14

  I meet emca error before and it is just resolved when I created lisnter.ora, so I want to try it.

  I doubt that listener.ora was the cause.

  Although experience is a better teacher.

  No, trying to find the cause of a problem is a better teacher, just try things at random - it's a good way to teach you things like "emctl start dbconsole does not work without a listener.ora", which is clearly false.

  Once start emca

  The command is not 'emca,' maybe that's your problem.

  We don't know, because you have not copied/pasted something here, including the error message

• Cannot start db > ORA-09925: cannot create the audit trail file

  version 10.1.0.5.0
  AIX 3 5 00C9CEA04C00 dcxnim01
  
  When I'm trying to start db, getting this message any idea?
  
  SQL > connect virtue sysdba;
  ERROR:
  ORA-09925: cannot create the audit trail file
  IBM AIX RISC System/6000 error: 89: invalid file system control data detected
  Additional information: 9925
  ORA-09925: cannot create the audit trail file
  IBM AIX RISC System/6000 error: 89: invalid file system control data detected
  Additional information: 9925
  
  
  Here's the tail of the log of alerts
  
  3 Private_strands to the log command
  Thread 1 Advanced for you connect to sequence 3923
  Currently journal # 1, seq # 3923 mem # 0: /db01/oradata/ldapdcx1/ldapdcx1/redo01.log
  Fri 6 Aug 16:48:34 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_j001_991348.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  Fri 6 Aug 16:48:35 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_mmnl_508106.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  Fri 6 Aug 16:48:38 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_ckpt_839714.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  ORA-27072: IO file error
  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information: 9
  Additional information: 3
  Fri 6 Aug 16:48:38 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_lgwr_905470.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  ORA-27063: number of bytes read or written is incorrect
  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information:-1
  Additional information: 1024
  Fri 6 Aug 16:49:07 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_pmon_848078.trc file:
  ORA-00470: LGWR process ended with the error

  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information:-1

  Problem of the OS.
  What is the problem at the level of the BONE with the disc?

  unpacking of tail - 100

• is there a way to create a single video file of two separate video and have their output to two separate projectors?

  I started using the first less than two months ago and my tech video background is rather limited . I'm doing an art project where I am projecting two different projections on a large wall that are designed to be in harmony and interact with each other.   I intend to use two laptops, one for each projector.  This is a possible problem.  The docents Gallery in this gallery of the University will have to turn everything on every morning, having to click on both computers at the same time to synchronize the images play together perfectly.  That simple I'd like to think, I know year 19 former students who are the docents sometimes fail to grasp what is obvious.  Is there a way to take two project files and create a single file that could play for two projectors from a laptop outside?  As a split screen monitors?  That way they click on a button. I don't know if it's possible, it can't be.  I just thought to deal with this problem as possible before that happens.   

  Has ny advice would be greatly appreciated.

  You can create a sequence on the front which is double width. For example, 1280 x 720 (720 p) becomes 2560 x 720, which is TWO 720 p side by side videos in a clip. For reading, you may be able to implement the graphics card settings to do it for you, or - get a Matrox DualHead2Go box. You must set the graphics card in your computer to the display size double width, such as 2560 x 720, and the single output of the computer goes in the DH2G unit, which separates the entry into two outputs independent of 1280 x 720.

  There are many models available, depending on whether you are working analog or digital graphics card. There is a ton of information available, including tools for configuration and testers to run on your system. It is important to seek and choose carefully, to make sure that the connections are compatible and that map display of your computer (and Matrox unit) will support both the specific resolution you are looking for.

  Matrox DualHead2Go Digital SE | Multiple monitors for laptop computers

  Thank you

  Jeff Pulera

  Safe Harbor computers

  www.sharbor.com

• LV 2016: LabVIEW could not create the required channel file permission error endpoint; NOR-488: Error of hardware detected DMA

  I just installed the new 2016 LabVIEW with the two patches and wanted to check the new feature.

  When you create a channel writer, there was a pop up select the Channel end point, but whatever the option chosen, there is a window saying "LabVIEW could not create the required channel endpoint", error ccode: 8 file authorization error

  NOR-488: Error detected DMA hardware.

  I have error permition from file to file, file that is?

  By chance, do you have re-defined the default data directory in LabVIEW?  LabVIEW uses to host files for the warp threads, and if you moved from its default position in your profile (C:\Users\\Documents\LabVIEW data), especially if you moved it to the root of C:, it could become unalterable.  This must remain in your profile!

  Bob Schor

• Error 0 x 80070052 as it is impossible to create the directory or file

  I am copy photos in the photo gallery of a folder/tag for a scan of the disc.  I have a file of some 140 photos which does not copy.  Others have copies with no problems.   I created a folder with all the photos I want to copy.  When they begin the process, all go but those of this group in particular.  I get the above error message.  Please tell me what I would do, I succumbed to the last 1.5 hours to resolve myself.  Happy new year!!

  Kelly

  My next try to discover what was going on would be to check the location of the files. A folder root drive can contain as many files, (depending on the file system used, such as Fat32 or NTFS). I wouldn't count the number of files successfully in the root and see if you're on that, based on the constraints of the file system. When you click right a drive and properties, it shows the file in use for this drive system.

  Errors creating files or folders in the root directory:

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Create the new control file

  I use oracle8i on windows XP. All the command deleted file and I couldnot create because of following erros:
  
  I wrote after a SQL command * more the worksheet:
  
  create controlfile
  student of the database
  noresetlogs
  
  I get the following erros when I run these commands:
  
  
  create controlfile
  *
  ERROR on line 1:
  ORA-01503: CREATE CONTROLFILE failed
  ORA-01565: error in file identification
  ' % ORACLE_HOME%\DATABASE\DBS1%ORACLE_SID%. ORA'
  ORA-27041: could not open the file
  04002 - OSD: could not open the file
  S/O-error: (OS 2) the system cannot find the file specified.
  
  
  It would be great if someone help me.
  Thank you.

  Hello

  You can paste the contents of the controlfile you are trying to create, and how is the db in nomount mode?

  Anand

• create the export dump file schema script.

  Dear all,
  
  
  I am facing probolem, I gave the 100 GB dump file to import into the database 10g. Import process begins and importer tables but some of the tables inbetween not achieve because my database which having not not exact tablespace name. And I can't ask them what their name of the tablespace.
  
  Now I need to create a tablescript of the dump file, I'll create the first diagram I will import data to ignore = y.
  Please if you guide me, how can I create a schema (table) of discharge script.
  
  
  Thank you
  Shir khan

  Dear friend,

  Use SHOW = parameter Y for script and see what tablespace is missing.
  Create the same with the space required and perform the import.
  Use IGNORE = setting Y to ignore the objects already created.

  Thank you