E.M.P. Provisioning when using an external user directory

Similar Questions

• Performance of poor graphics on VMWare Fusion when using an external monitor

  Hello

  When you use an external monitor (connected to VGA via adapter Thunderbolt), I noticed severe lag while doing operations with open windows (for example, drag, maximize, minimize). In general, it is safe to say that all operations that appeal to no effect whatsoever (for example open a start menu), are significantly lag. When running in a one-stop single mode or unplug the external monitor, none of these discrepancies. So I strongly guess that arises the question of having a connected external monitor.

  -Would be my Macbook is not powerful enough to run 4 screens simultaneously (two for Mac OS in native mode as well as more virtual both inside Windows)? Are there settings I can try and change that could affect this underperformance? Or is it a problem with VMWare? Please note that the CPU is not even by far the most when running the virtual machine and 'stress test' moving around the windows.

  My settings for the virtual machine are attached to this post.

  I use a Macbook to mid-2014 Pro retina 13 "with 16 GB of RAM and a processor Intel i7 @ 3 GHz, as well as the latest Version of VMWare Fusion (7.1.0). The OS I am running using VMWare is a Windows 8.1. (implemented from scratch on this machine) with all updates installed (as well as VMWare tools). I am running Windows in a resolution of 2560 x 1600 with icons on the scale, but I tried to run VMWare low with 1440 x 900 resolution, which made no difference.

  Hi ltzi1,

  Are there when you select "Unit" only for "Scaled high resolution" in the display settings?

  Please can you give us the external monitor resolution setting and attached support beam (it can be collected by 'Help-> support Collect information') which could help understand the problem?

  Or a registration form would be useful. : D

  Thank you.

  -Shan

• Disk error non system at boot when using the external USB disk

  Hello

  I use Windows 7 Pro.  I have a Seagate external USB disk causing a "Non-system disk error" at startup.
  I had the same problem with a Clickfree drive.
  The problem occurs on my other PC with different versions of Windows.
  How can I get my computer to start and not give me this error message for my backup drive?
  At startup (when the drive disconnected), I get a screen of BACK indicating "Client Mac Addr."... GUID..., DHCP. "I think it's looking for a disk boot from.
  I just need to boot from the internal hard drive.
  Thank you
  AS

  USB external references aren't desingned to be connected on startup, you must also use the safely remove the procedure and disconnect the USB key before closing.

  If you get such a screen "Client Mac Addr... etc" at the start (with usb unplugged), looks like you are using a very old motherboard. If the system starts only with connected usb, then your initial installation of victory is defective or damaged

• No sound on Laptop Inspiron 15 when using an external monitor

  I plugged a VGA screen for my Inspiron 15 via the HDMI port (using a HDMI VGA adapter). It's great, except that I get no audio.

  I have remove the connection to the HDMI port and audio feedback.

  Is it possible that I can connect an external display and have audio?

  kevinmci

  Is it possible that I can connect an external display and have audio?

  Hello. After you connect the external monitor, go to the sound properties (Control Panel > Sound). On the Read tab, right click on "Speakers" and make sure that the default device. And then the audio will be released through the speakers of the laptop again.

  If "Digital output" or "HDMI Audio" is the default device, then you will hear no audio.

  

• Laptop crashes when you use an external monitor

  Hi, my laptop still crashes when using an external monitor. So far ive tried s-video and vga, but still no joy. This can happen after a few minutes or sometimes after a good few hours, and it seems to crash more frequently during playback of movies, games etc... There are a few signatures of different problem most to come including this one:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode:                                              116

  BCP1:                                                   8688F510

  BCP2:                                                   8E01FB5A

  BCP3:                                                   00000000

  BCP4:                                                   0000000D

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                              768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini012710-01.dmp

  C:\Users\Jack\AppData\Local\Temp\WER-62384-0.SysData.XML

  C:\Users\Jack\AppData\Local\Temp\WERF852.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Maybe a problem with my graphics card drivers? This is my first post and I'm not sure if this is really anything that someone would be able to help me with that I don't really know anything about the wiretap, but tips are very much appreciated.

  Vista 32 bit

  ATI Mobility Radeon HD 2600 graphics card

  Thank you

  Hello j.d.1882,

  1. you have the latest drivers installed for your graphics card?

  I suggest that you update the drivers for the graphics card and check if the computer continues to crash.

  In addition, I suggest that you download the dump files to check exactly what may cause the problem.

  Athttp://skydrive.live.com using your Live ID and I will check:

  a. Click Start, select run, type '% SystemRoot%\Minidump' (without the quotes) in the search box and press ENTER.

  b go to your desktop, right-click on it and create a new folder named "Dump".

  c. copy all the files in memory dump (it looks like Mini092003 - 01.DMP) in Minidump in this folder.

  d. right click on the folder of the image, click on "send to" and click on "compressed file (zipped).

  e. Please download the ZIP file.

  You can check the link for more information below:

  http://support.Microsoft.com/kb/307973

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Measurement error of the County of edge by using the external sample clock

  Hello

  I'm trying to measure the number of edges (rising) on a square wave at 5 kHz with a generator function on a device of the NI PCIe-6363. I configured a channel of County of front edge of counter at the entrance of the PFI8 device. I use an external sample clock that is provided by the output of the meter of a NI USB-6211 housing channel. If I acquire for 10secs then ideally I would expect to see a total of 50000 edges measured on the meter inlet channel. However, my reading is anywhere between 49900 and 50000.

  When I use the internal clock of time base to measure the edges, the measure is accurate and almost always exactly 50000. I understand that when you use the external sample clock, the precision of the measurements is subject to noise level of the clock signal. However, I checked the clock signal is stable and not very noisy. Any reason why there is an error of measurement and how tolerance should I expect when using an external sample clock compared to when you use the internal time base clock?

  Also, what is best clock Frequency (with respect to the frequency of the input signal) when using an external clock?

  Thank you

  Noblet

  Hi all

  Thanks for all your sugggestions. I was using an input signal with a function generator which had a range of 8V. It turns out that the reduction of the amplitude to 5V solves the problem. I was able to get accurate numbers with the 6211 external clock.

  Thank you

  Noblet

• External user followed in Captivate first

  If I understand correctly, there are some limitations to the use of external user accounts (self-registration of service too), when it comes to monitoring the progress and performance of users in the LMS.

  As we work with elderly test subjects that might not be very technologically inclined, we would prefer to sign upward and as easy as possible, and if the Adobe ID is simply not ideal.

  Is there an alternative?

  Hi Thomas,

  With external user Adobe ID is not necessary. Simply send the registration of external users link to the user where it will ask you to register itself. User can use any email ID (his personal e-mail ID) to register for this external group and you will see increased County on your side of seat.

  After registering, the user will be directed to the home page of the learner. Later user needs to use the external link and the registered e-mail ID and password to connect.

  Kind regards

  MILIN

• Pop/clicks in audio when you use an external DAC of lightning with iPhone 7

  Has anyone tried using an external DAC lightning with the iPhone 7?  I have a TEAC HA - P50 and a Bayerdynamic A200p and both have the sounds by clicking / jumping when the music plays.  Permutation of the cable does not resolve the issue.  These questions were not using a 6 s iPhone or iPad iOS running Pro 10.  Lightning provided the 3.5 mm adapter does not have the same problem that makes me wonder if it's just a problem of compatibility with the new iPhone.  The problem is present on an iPhone 7 runs both iOS 10.0.1 and 10.0.2.  Thanks in advance for any help you can provide.

  I have exactly the same problem running Dragonfly black DAC, random appears, click on the bangs. Audio format makes no difference, nor does the file be listened to downloaded. The CAD even works great with a MacBook Pro running macOS Sierra.

• Portege M780-10U frezees when using external LCD

  Hello

  I have a Toshiba Portege M780-10U running Windows 7 (x 32) SP1.
  I've updated all the drivers for the display, BIOS, etc.

  When I connect my Acer G235H laptop screen freezes after about 3 hours of operation.
  Nothing is recorded anywhere, just a complete freeze that requires a hard reset. The fan for the CPU to full power, and then runs once the freeze occurs.

  I'm not under any special graphics applications when it blocks just standard Office 2007 and IE8.
  I've isolated the gel down for display using a HP L1906 monitor and had no gel for 2 days.

  I tried the screen ACER G235H using VGA and HDMI, and I always get some freezes.

  Does anyone have ideas how I can fix this problem?

  Thank you

  > I've isolated the gel down for display using a HP L1906 monitor and had no gel for 2 days.
  For me it's really hard to believe that an external monitor may affect the functionality of the laptop, but it seems that your laptop freezes using only this special monitor (G235H).
  Use of the HP L1906 monitor everything is ok. Is this good?

  Hmm connect you the L1906 monitor to the same port as G235H?
  There may be differences between the external resolutions?

  Sorry mate, but it s really hard to tell what could bring it this maybe s a high temperature problem and perhaps its pure coincidence that freezes it cell phone using the external monitor.

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• VCAC 6.0 when and why to use an external server for Orchestration

  When and why use an external server orchistrator and not that which is incorporated into the VCAC

  Hello

  generally, we recommend to use a server external vCO, for the following reasons:

  (if apply current vCAC 6.0.1 version only, I hope not for future versions) the built-in vCO has a build number slightly less than version 5.5.1 vCO GA so a few new plugins only install & works correctly.

  An instance separate vCO is more weakly coupled to the vCAC device, so you can for example develop, operate and maintain the systems independently of each other.

  You can more easily multiple instances of vCO in cluster mode.

  If you use vCO not only in the context of vCAC, but for tasks of automation / operational General, you are not "bound" in the vCAC environment.

  Overall: more flexibility for the modest sum of just having an additional device.

  See you soon,.

  Joerg

• Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you

  Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.

  Thank you

  LR is not a file Explorer. He knows only the disks that you imported photos of.

  If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.

  If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.

• Insert a div for a single document case back only when using external CSS stylesheet.

  I'm trying to set a background image in one of my div boxes, but because I am using an external stylesheet it changes it in all my documents. How can you do with just this one page? Preferably in design mode.

  What I was doing to slove this problem was:

  • Open my external CSS stylesheet
  • Copy the contents of this
  • Remove the CSS link in a page, that I wanted to be different.
  • Paste the content in thein the rest of the page CSS rules.

  Then I could put a background in this box without affecting other pages...

  I tried the other suggestions, but could not get to work. Don't say that they are wrong, but maybe I was wrong implementation does not.

• iMac screen plunges into the black when using Safari

  When you use Safari on my end 2014 27 "iMac, the screen will often randomly, fade to black.  Pressing the space bar will revive it, but it will sometimes immediately repeat the same thing.  When he exhibit this behavior, the Console message is:

  8:50:52.295 AM WindowServer [185]: device_generate_lock_screen_screenshot: authw 0x0 (0) [inf, inf, 0, 0] shield 0x7f9be085d600 (2001), dev [2048,1152]

  It's the second machine that to happen, the first was a late 2009 27 "iMac.  He can't get on my laptop. The system is:

  iMac (retina 5K, 27 inches, end of 2014)

  3.5 GHz Intel Core i5

  32 GB 1600 MHz DDR3

  AMD Radeon R9 M290X 2048 MB

  Any help you can offer with this deeply frustrating problem is appreciated gratefully.

  Hello captainlarrydart,

  Thank you for using communities of Apple Support.

  If I understand your message that your Mac is apparently going to sleep on his own, sometimes immediately after waking up.  To help solve this problem, please follow the steps below.

  If your Mac goes to sleep in an unexpected way

  Make sure that this energy saver is set up as you wish: choose the Apple menu > System Preferences, and then click energy saver. Adjust one or more of the following affect when controls your Mac goes to sleep. Some of these controls are not available on your Mac model.

  • Cursor 'turn off display after.
  • Cursor "display sleep".
  • Slider 'the computer sleep.
    If a slider is set to 'Never', sleep is disabled for this feature.
  • Schedule button

  Make sure you that you do not put your Mac to sleep accidentally:

  • Pressing on the button / stop can put your Mac to sleep.
  • Move your mouse pointer into a hot corner can put your Mac to sleep, depending on your settings from Mission control. Choose the Apple menu > System Preferences, and then click Mission control. Click on the button active corners, then see if any of the corners are set to "Display Put sleep."
  • Using magnets near your Mac laptop can put your Mac to sleep.

  If the previous steps do not work

  These additional steps can help identify or resolve the problem:

  • Reset the SMC.
  • Reset the NVRAM.
  • Disconnect external devices other than your Apple keyboard, mouse, and screen. If that solves the problem, gradually reconnect your devices, testing each time until you find the device that interferes with sleep. And then check the documentation that came with the device or contact the manufacturer of the device.
  • Start in Safe Mode to see if the problem is related to startup items not Apple, login items or kernel extensions.
  • Try to isolate the problem by using a different user account.

  If your Mac does not sleep or wake up when expected

  Have a good.

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF