E2000: Can I get 300 Mbps 2.4 GHz?

Hi all. Is it possible to get 300 Mbps with the 2.5 GHz band? If not why? If so, how? I only got 300 Mbps using the 5 GHz band, but I need to stick with the 2.4 one because some of my devices do not support the band 5 GHz. thanks

Thanks for your comment, I just realized thanks to you that my wireless adapter has been configured to use only 20 MHz wide. Maybe that's why. I'll try again tonight when I get home.

Tags: Linksys Routers

Similar Questions

  • How can I get 300 DPI on my final drawing?

    International poster competition requires 300 dpi image, scaled to the portrait of 27 "x 40". How to do this using Pages?

    Who's going to be a huge file.

    Simple math that makes a 8 100 x 12 000 pixel bitmap in any format they will accept.

    Are you sure you want to a bitmap of the entire poster or a pdf file that has all the images to a minimum of 300 dpi?

    Peter

  • WRT ac1900 connection is wired not reach 300 Mbps

    I have a router AC1900 WRT to gigabit, it should be fast.

    What should I do to get this router to work at the maximum speed available for me?

    If I connect directly to the modem, I get 300 Mbps.

    If I go through the router I get 42 Mbps, the router seems to be limiting it.

    I can't find any option to release this place, ideas?

    Deactivation of MP brought me to 308, I'm okay with that...

    Thanks for the info on the Auto setting of stuff, we would think that they would have standards, don't think not!

    Also, I do not use the Parental control...

    Thanks again, I am fine with 308 Mbps...

  • HP Envy 15 TS (C8P47AV): can't get Realtek GBE onboard Ethernet RTL8168 go above 100 Mbps

    I've only used my HP Envy TS 15 (C8P47AV) wireless and recently got a wired connection using CAT7 at my desk on the 2nd floor. I can't exceed 100 Mbps and it is extremely frustrating! I've read tons of things on the web and can not find something that helps! My WiFi gets a faster than the Ethernet cable speedtest. I see this change once! That's when I changed the cable that I have my router on and noticed he went to 300mbps and things flying. However him unplugging and plugging it into which he disappeared port. It's almost like the old bargaining hung. In any case change this to force it to work? I tried gigabit forced, you name it, any setting changes you fixed! I even tried to plug directly into the router port and that it did not. I have other devices that work fine with this same CAT7. I'm SOL with this version of HP laptop?

    I found the problem! After reading each thread only forum I could find on Google. Someone suggested to see if there was a brooch twisted in the connector and of course the middle one was bent! I don't know how it happened as I've only used wifi. It's a little tricky but I folded it back turned and I was ready to go! The chalk of it as not a cable problem or driver!

  • I just put an old iphone 4S and it says its disabled for 1 300 minutes. Can I get around this without a computer?

    I just put a very old iphone 4S and it says "iphone disabled" 1 300 minutes! Can I get around this or reset without using a computer? Help!

    If iCloud is enabled (and always connected to wifi or cellular) Yes, otherwise no https://support.apple.com/en-us/HT204306

    -AJ

  • Do not get the speed of a band of N on WiFi... No. 300 Mbps!

    I have the Intel Centrino Wireless-N 2230 and I get only 144.0 Mbps when I should get around 300 Mbps. What should I do? My router is a band capible N 300 Mbps. Is this a hardware problem? Everyone there understands why it does this? I've updated the drivers!

    Looks like your wireless network is working very well.

    It's a two-way traffic, so the effective speed is usually half of the rated speed. Basically, half of the pipeline is used for each direction (computer to the router and vice versa), and that's if there is a single device on the network.

    300 Mbps is shared between all devices on your network, so if you have several computers and tablets, etc. do stuff on the network at the same time, everyone gets a part of 300.

    144 seems actually straight if you have just a computer that is running at the moment.

  • PX2 - 300 d - where can I get the MIB for a LeNovoEMC PX2 - 300 d?

    Hello

    I would get the MIB for this product.

    Where can I get?

    Thank you.

    Bird,

    Just found this:

    If a client requests a mib file for SNMP implementation, this is the link to click:

    http:///manage/mibs/lenovoemcmib.txt

  • How can I get my tab open all when update my firefox?

    now I'm still using very old Firefox 3.6.12 and I want to upgrede. I always using "save and exit" to my tab all open when quitting and not using bookmarks. total approximately 300 + tab open.
    I already try to upgrade my tab and once all is lost. and because of that I do system restore and reintall with old new.

    How can I get my tab open all when update my firefox?
    Sorry my English is a mess...

    already installed, but all the connection site became logout.
    and when right-clicking, page list too...
    and when I choose open in new tab or windown and something else happened...
    loading longer become page (already stop the other tabs)
    and when I block a text/link and drag it to the input tab or the navigation text or input search nothing happenend too...

    and when I close it, no other choice to save and exit...

    Edit:

    Resolved:

    1. Save and quit already solved with the help of addons.

    2. right click and drag the problem is already solved, I close firefox and restart.

    unsolved:

    1. all the connection still in State of disconnection site (can't stay as before connection).

    Edit:

    unsolved:

    2. on option, the images block list is missing.

  • Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

    + Sorry for my English is not my mother tongue. +

    Hello

    I expose my problem:

    I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

    Configuration of the laptop:

    * Windows 7 Ultimate 64-bit (with all updates installed).
    * All the updated drivers correctly.
    * With the latest version of the BIOS.

    Router:

    * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

    The router configuration:
    * WPA2-PSK AES.
    * 802.11n
    * Maximum output power.
    * Channel: 11 (not automatic, that this channel is relatively free).
    * Width of channel: 40 Mhz.
    * Maximum tx frequency: 300 Mbps.

    Other information:

    The wireless card drivers are correctly then updated (ver. 5.60.48.35).
    * The router has updated the firmware.
    * I tried all the settings of the wireless card.
    * Bluetooth off (without interference).
    * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

    Thanks in advance,
    Greetings.

    Post edited by: Xibalba

    Have you tested using different channels?
    Have you tested speed WIFI connected to another router?

  • I lost my files in my outlook express Inbox. How can I get back them?

    I lost my files in my outlook express Inbox. How can I get back them?

    The email you see in sent items. Is - this mail you thought you deleted a long time ago? If so, it almost sounds like you had an old identity.

    File | Identities | Manage identities. Is there more than one list? If Yes, go to the other identity. If not, read on...

    Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

    Why OE insists on compacting folders when I close it? :
    http://www.insideoe.com/FAQs/why.htm#compact

    Why mail disappears:
    http://www.insideoe.com/problems/bugs.htm#mailgone

    About file Corruption:
    http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspx

    Recovery tools:

    If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

    To restore a folder bak on the message store folder, first find the location of the message store.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

    Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

    Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

    First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

    If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

    If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
     
    If you have not then bak copies of your dbx files in the Recycle Bin:

    DBXpress run in extract disc Mode is the best chance to recover messages:
    http://www.oehelp.com/DBXpress/default.aspx

    And see:
    http://www.oehelp.com/OETips.aspx#4

    A general warning to help avoid this in the future:

    Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

    Bruce Hagen ~ MS - MVP [Mail]

  • Help - can't get the firmware to install WRT54GL ver 1.1

    Hi everyone, I spent and openwrt 2.4 and now you want to put the linksys back on. I followed all the instructions and just can't get it to happen - what am I doing wrong

    1. the unit is in safe mode - by pressing reset after power cycling the unit wait for the DMZ light press the reset button, the DMZ light is now flashing 3 times a sec

    2. I can ping 192.168.1.1 I can telnet 192.168.1.1

    3. I asked a technician online Tftp.exe as no download links I could find worked

    4. that unity is a worm WRT54GL 1.1 I downloaded FW_WRT54GL_4.30.12.3_US_EN_code, 0.zip - which I confirmed with the tech online as being the firmware available only

    5. I unzipped the firmware to 4 above

    6. as reported by online technology took the network port on my laptop that is running Windows XP to 10 Mbps half duplex

    7. have you opened Tftp.exe and putting 192.168.1.1 as a server, the password is the root password I put in openwrt and I selected the .bin for sync unziped file

    8. the program says can not find server

    Here, I'm to and are now totally stumped as to why it did not work.

    I downloaded another program http://www.brothersoft.com/tftp-client-122473.html tftp

    Try this software, I've learned an opcode not valid (2), which seems to indicate that she at least contact, but something is not right. Just for a test, I unplugged the modem and re - run the second program tftp and it cam back saying "no response from the server", confirmed by the first thought at least he did make contact. This second program has not anywhere where you can set a password. This program also installs a two command line option that I could not get to work

    So I have the following questions

    1. the use of telnet for the WRT I can confirm that tftp server is running

    2. can I get like a tail-f on a log file in WRT so I can try and see where it is a failure

    Other than that, can anyone add 2 c as to why it will now work for me

    Hi everyone, I found a way to get the update to work. As long as you still have SSH access which is

    1. with WRT mode normal ssh in to your openwrt

    2. rename the .bin into something more small it IE firmware.bin and upload it to somewhere on the net it's easy access

    3. in the ssh window cd /tmp/

    4 wget http://domainname.com/firmware.bin

    5. to make a writing /tmp/FW.bin linux mtd & restart I got this error

    Trx bad header
    If it is a firmware as well, as some of the
    the original firmware files, use the following command to convert trx:
    dd if = of = firmware.trx firmware.bin * beep * = 32 skip = 1
    6. so I did what he told dd if = of = firmware.trx firmware.bin * beep * = 32 skip = 1

    7. then go bat writing linux /tmp/firmware.trx & reboot

    And it's not all good - what a relief

  • HP Pavilion 15 N: Wireless Card (300 Mbps Capable with Bluetooth 4.0) for HP laptop (product number: E6G00PA-#ACJ)

    I want to upgrade the current mini pci wireless card to a more capable wifi card. I searched and found that the BIOS can be on a white list and some cards will not work. Please suggest a card that is able to do 300 Mbps speed connection and with bluetooth 4.0.

    He is also a processor AMD PC. What's an intel based work WiFi card mini pci?

    Thanks in advance.

    Replaced the RALINK card with an atheros AR5B22 card and it works fine. BIOS is NOT in the whitelist.

  • Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

    I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

    At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
    I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
    , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
    (a # 169 instead of a # 192)
    In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
    'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
    Results: connection Test
    Test details:

    I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

    X "Ping 0.0.0.0 Gateway: failure.
    !  "No DNS server is available for this connection.
    ! "No WINS server is available for this computer.
    X "Ping 0.0.0.0 network: failure.
    ------------------- -------------------------------------------------------------------------------------------------------------
    In this same window of diagnostics under the "LinksTab".
    Link current test status: (what is determine the current connection speed of the adapter and link partner)
    Results:
    ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

    The best link options-results of the speed test:
    ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
    (Note that these link tests are online and I can't online)

    Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
    Depending on the tab is the Hardware tab
    Hardware diagnostics check for I/O conflicts...
    Results: all the tests:
    EEPROM test
    FIFO test
    Test register
    Interruption of the tests
    Loopback test

    I also went in the prompt type in IPCONFIG... c which shows:
    Ethernet connection to the Local network card:
    ConnectionSpecific DNS suffix: (it's completely empty here)
    Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
    Autoconfiguration IPv4 address: 169.254.160.220
    Subnet mask: 255.255.0.0
    Default Gateway: 0.0.0.0

    I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

    I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

    I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
    Thank you!

    Hello
     
    We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.

    Open the destination folder where the files are extracted and run the Setup file to complete the installation.
     
    To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
     
     
    I hope this helps.
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • Can I get a new version without a subscription?

    Can I get a new version of After Effects?

    What I have to pay to use it for more than a year?

    I can't make payments. I need to buy the software once and use it until I can upgrade at a later date, when I can afford it.

    It seems that the idea of subscription only allows use of your software if you pay each month or year. So I pay $300 a year to use my software?

    Can I continue to use the my pre CC software if I have to cancel?

    Subscriptions run on a basis talk.  You can purchase a one year subscription and make monthly payments or pay all at once, but the use of the product ends at the end of the year.  If you renew at the end of the year, and pay again then it continues for another year.

    CS6 products are the only authorized versions still available.  There will not be any version of CS7 it follow-up.

    Buy CS6:
    ----------------------

    http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  • How can I get the maximum salary of the first ascending

    Hello

    How can I get the maximum salary of the first in ascending order.
    I need the sql query.

    want my output:

    Emp_name salary
    A 5000
    SS 100
    300 AA
    DD 700
    WW 2000



    Thank you
    Walid.

    Here is an example:

    SQL> with mytable as
  2  ( select 'aa' as col1,  300 col2 from dual union all
  3    select 'ss' as col1,  100 col2 from dual union all
  4    select 'a'  as col1, 5000 col2 from dual union all
  5    select 'dd' as col1,  700 col2 from dual union all
  6    select 'ww' as col1, 2000 col2 from dual )
  7  select col1, col2
  8  from   mytable
  9  order by decode(row_number() over (order by col2 desc),1,0,1),col2;

CO       COL2
-- ----------
a        5000
ss        100
aa        300
dd        700
ww       2000

SQL>

    Nicolas.

Maybe you are looking for