E2500 defined to use the Slingbox.

How to configure the router to use ae Slind Box Pro?

You may need to have a wireless bridge if you want the slingbox to connect to your wireless router. The most common way to get connected is through an Ethernet cable. You must connect one end on the router and the other end to the slingbox. I found this link on how to install the slingbox pro and received step-by-step instructions: http://www.ehow.com/how_6956831_set-up-slingbox-pro.html.

Tags: Linksys Routers

Similar Questions

How can I transfer levels pre-defined between (use the gray card) photos in Photoshop elements 14?

Hello!
I bought a grey card to be able to define the precise (low temperature) white balance in my Photoshop elements 14 treatment (MS Win 10).
The first part of the task - the definition of the white balance by a TEST of the gray card shot is very good. However, I can't understand how transfer and apply levels of white balance so determined for the shots on TARGET only container not card gray.
I guess I need to save/load levels preset in Photoshop elements 14. Coul you please someone teach me how do?
Kind regards
Anton

You have the right version of ACR.

Presets are not known elements, only Lightroom and Photoshop, you must use other ways.

Opening several files at the same time: you can select multiple files in the organizer or the Explorer and open them at the same time, they will appear as a film strip vertical on the left side of the ACR dialog box. You can apply a setting in a single file or several or all of the listed files. You can also select all files (Ctrl A) and add all the settings to all files at the same time.

To apply the "previous conversion", click on the small icon to the right of the title bar 'basic' to unfold a menu drop-down.

BEA-000362 < server failed. At least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If the database is selected, then DataSourc

My Weblogic 12 c StartWeblogic.cmd failed after that I configured the migration of the cluster to the database with the name of the table as none. I can't even to the Server Admin page.
Before that, I remove the. log.lck, process.id, process.lck files in the nodemanager directory
Help, please! Thank you!
Joe
****************************************************************************
# < October 1, 2015 4:18:20 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734300986 > < BEA-090905 > < disable provider JCE CryptoJ self-int├⌐grit├⌐ for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734301049 > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG128 to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true. >
# < October 1, 2015 4:18:21 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Home > <><><>< 1443734301064 > < BEA-000395 > < the following extensions added at the end of the classpath directory content:
C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\log4j-1.2.15.jar; C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\wllog4j.jar. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-4 > <><><>< 1443734301361 > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 24.60 - b09 of Oracle Corporation. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < management > < NAP1D692 > <>< Thread-5 > <><><>< 1443734301610 > < BEA-141107 > < Version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 >
# < October 1, 2015 4:18:22 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-000365 > < Server State has changed at the START. >
# < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-002900 > < init > self-adjustable thread pool.
# < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734302733 > < BEA-002942 > < CMM level memory becomes 0. Sleep thread pool to 256. >
# < October 1, 2015 4:18:22 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302733 > < BEA-000214 > < WebLogic Server "AdminServer" version:
WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 't3' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "t3s" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the 'http' Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "https" Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "iiop" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'iiops' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < "ldap" Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "ldaps" is now set up. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "cluster" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'clusters' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "SNMP" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "admin" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002624 > < administration Protocol is "t3s" and is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000570 > < Network Configuration for channel "AdminServer.
Listening address: 7001
Address public n/a
True active http
Tunneling Enabled false
Outgoing Enabled false
Admin traffic enabled true fake license to ResolveDNSName >
# < October 1, 2015 4:18:23 PM CDT > < Debug > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000571 > < retail network for channel "AdminServer.
Weight of the channel 50
Accept the rear 300
Timeout 5000ms
Message Max Size 10000000
Timeout message 60 years
Timeout of 65
Tunneling Timeout 40 s
Tunneling Ping 45 s >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303279 > < BEA-002609 > < channel Service initialized. >
# < October 1, 2015 4:18:23 PM CDT > < opinion > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303357 > < BEA-170019 > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs\AdminServer.log server log file is opened. All events in the log server-side will be written to this file. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-170023 > < logging of the server is initialized with the Java application logging API. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < IIOP > < NAP1D692 > <>< [STANDBY] ExecuteThread: '2' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-002014 > < subsystem enabled IIOP. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303404 > < BEA-170025 > < initialized Logging area. Events in the field log will be written to C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs/joe12c_domain.log. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Diagnostics > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303451 > < BEA-320001 > < ServerDebug The service initialized successfully. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303513 > < BEA-280008 > < open the persistent store of file 'WLS_DIAGNOSTICS' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\diagnostics requestedWritePolicy = "Disabled" fileLockingEnabled = true driver = "wlfileio3." >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-280103 > < storage of persistent files "WLS_DIAGNOSTICS" puts in cache in weblogic.store.io.file.direct.FileMapping [granularity = 65536 io mapped =]. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-141278 > < Java configuration entropy is: property system "java.security.egd = null; File JRE java.security "securerandom.source = file:/dev/urandom" property Blocking of the Config = false; Version of the JDK = 1.7.0_60; Operating system = Windows 7. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141280 > < configuration detected NON-BLOCKING of entropy of java. This setting you will give the best performance on machines with limited sources of entropy, but is less secure than a blocking entropy configuration. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141187 > < Java System properties are defined as follows:
awt. Toolkit = sun.awt.windows.WToolkit
leader. Encoding = Cp1252
leader. Encoding.pkg = sun.io
leader. Separator =.
Java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
Java.awt.PrinterJob = sun.awt.windows.WPrinterJob
Java.class.Path = C:\JDK17~1.0_6\lib\tools.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net. SF.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.WLS.common.nodemanager_2.0.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\com. Oracle.Cie.config - WLS - online_8.1.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derbyclient.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derby.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\Progra~2\IBM\RATION~1\CLEARQ~1\cqjni.jar
Java.class.version = 51.0
Java.endorsed.dirs = C:\JDK17~1.0_6\jre\lib\endorsed; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed
Java.ext.dirs = C:\JDK17~1.0_6\jre\lib\ext; C:\Windows\Sun\Java\lib\ext
Java.Home = C:\JDK17~1.0_6\jre
Java.IO.TMPDIR =
Java.Library.Path = C:\JDK17~1.0_6\bin; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org. Apache.ant_1.9.2\bin; C:\JDK17~1.0_6\jre\bin; C:\JDK17~1.0_6\bin; C:\Progra~2\IBM\RATION~1\common; C:\Progra~3\Oracle\Java\javapath; C:\oracle\product\102~1.0\client_1\BIN; C:\Progra~2\BUSINE~1\Common\3.5\bin\NOTES\; C:\Windows\System32; C:\Windows; C:\Windows\System32\wbem; C:\Windows\System32\WINDOW~1\v1.0\; C:\Progra~2\HEAT\;\\nap-lvip-047\scmref\bin; C:\JDK17~1.0_5;\\nap-lvip-047\maven\M3R1SW~N.9\bin; C:\Progra~2\CODECO~1;\\nap-lvip-047\scmref\bin; C:\Windows\System32; C:\Progra~2\IBM\gsk8\lib; C:\Progra~2\IBM\gsk8\bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\Bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\REMOTE~1\cteapis; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64\oci920_8;.
Java.naming.Factory.initial = weblogic.jndi.WLInitialContextFactory
Java.naming.Factory.URL.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
Java.Runtime.Name = Java (TM) SE Runtime Environment
Java.Runtime.version = 1.7.0_60 - b19
Java.Security.Policy = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy
Java.Specification.Name = Java Platform API Specification
Java.Specification.Vendor = Oracle Corporation
Java.Specification.version = 1.7
Java.Vendor = Oracle Corporation
Java.vendor.URL = http://Java.Oracle.com/
Java.vendor.URL.bug = http://bugreport.Sun.com/bugreport/
Java.version = 1.7.0_60
Java.VM.info = mixed mode
Java.VM.Name = VM Server Java hotspot 64-Bit
Java.VM.Specification.Name = specification of Machine Java virtual
Java.VM.Specification.Vendor = Oracle Corporation
Java.VM.Specification.version = 1.7
Java.VM.Vendor = Oracle Corporation
Java.VM.version = 24, 60 - b09
javax. Management.Builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
OS. Arch = amd64
OS. Name = Windows 7
OS.version = 6.1
Path.Separator =;
Sun.Arch.Data.Model = 64
Sun.Boot.class.Path = C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-XML-WS.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-API.jar; C:\JDK17~1.0_6\jre\lib\resources.jar; C:\JDK17~1.0_6\jre\lib\rt.jar; C:\JDK17~1.0_6\jre\lib\sunrsasign.jar; C:\JDK17~1.0_6\jre\lib\jsse.jar; C:\JDK17~1.0_6\jre\lib\jce.jar; C:\JDK17~1.0_6\jre\lib\charsets.jar; C:\JDK17~1.0_6\jre\lib\jfr.jar; C:\JDK17~1.0_6\jre\classes
Sun.Boot.Library.Path = C:\JDK17~1.0_6\jre\bin
Sun.CPU.endian = little
Sun.CPU.isalist = amd64
Sun.Desktop = windows
Sun.IO.Unicode.Encoding = UnicodeLittle
Sun.java.Command = weblogic. Server
Sun.java.Launcher = SUN_STANDARD
Sun.JNU.Encoding = Cp1252
Sun.Management.Compiler = HotSpot 64 bits compilers Tiered
Sun.OS.patch.Level = Service Pack 1
User.country = en
User.dir = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain
User.Home =
User.language = en
User.Name =
User.TimeZone =
VDE. Home = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\ldap
WebLogic. Name = AdminServer
WebLogic.Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server
WLS. Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server
. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-280009 > < storing files persistent "WLS_DIAGNOSTICS" (75765a60-c009-403f-a7ed-c6a75a86e1c8) has been opened: blockSize = 512 actualWritePolicy = "Disabled(single-handle-non-direct)" explicitIOEnforced = false files = 25. " >
# < October 1, 2015 4:18:23 PM CDT > < Info > < XML > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303592 > < BEA-130036 > < XMLRegistry initialization >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000436 > < allocate 4 player son. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000446 > < active native to IO. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303849 > < BEA-000000 > < OpenJPA starting 1.1.1 - SNAPSHOT >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304005 > < BEA-000000 > < StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_PyMqKeZifftJZ2SHXoWLnh4Ldn4 = >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304021 > < BEA-090516 > < authenticator provider has already given LDAP. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304114 > < BEA-090516 > < provider authorized person a pre-existing LDAP data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304301 > < BEA-090516 > < CredentialMapper a pre-existing LDAP provider data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304317 > < BEA-090516 > < RoleMapper a pre-existing LDAP provider data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090093 > < no pre - WLS 8.1 Keystore provider is configured for server security realm myrealm AdminServer. >
# < October 1, 2015 4:18:24 PM CDT > < opinion > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090082 > < security initialization using security realm myrealm. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190000 > < J2EE Connector Service initialization. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190001 > < Service connector J2EE initialized successfully. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304473 > < BEA-280008 > < opening persistent store file '_WLS_AdminServer' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\default requestedWritePolicy = fileLockingEnabled 'Direct entry' = true driver = "wlfileio3." >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304504 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304535 > < BEA-040305 > < JMS service is initialized and standby mode. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040090 > < 8 deployed by default connection factories. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory2' with 'weblogic.jms.XAConnectionFactory2' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'MessageDrivenBeanConnectionFactory' with 'weblogic.jms.MessageDrivenBeanConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultConnectionFactory' with 'weblogic.jms.ConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'TopicConnectionFactory' with his "javax.jms.TopicConnectionFactory" JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory' with 'weblogic.jms.XAConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory0' with 'weblogic.jms.XAConnectionFactory0' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < default connection factory is started 'Factory' with his "javax.jms.QueueConnectionFactory" JNDI name >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory1' with 'weblogic.jms.XAConnectionFactory1' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040306 > < JMS service is now active. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304629 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSETS]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304676 > < BEA-280009 > < file persistent store "_WLS_AdminServer" (c54c7ab9-2eab-4095-ba3c-5abb38f06231) has been opened: blockSize = 512 actualWritePolicy = "Direct-Write(read-buffered)" explicitIOEnforced = false documents = 21. " >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304691 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304769 > < BEA-001135 > < init > the JDBC service.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001137 > < full initialization >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001138 > < Recovery > JDBC service.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001140 > < complete resume >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < messaging.interception > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304816 > < BEA-400000 > < initialization message interception service. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Server > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-002622 > < Protocol "[https, t3, snmp, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s '. "[, iiops]" is now set up. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-101128 > < HTTP initialization services. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101135 > < AdminServer is the default Web server. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101052 > < [HttpServer (defaultWebserver) name: AdminServer] Initialized >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101129 > < init > the container of the Web application.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304972 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001144 > < Force suspending the JDBC service. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001146 > < Force suspend completed JDBC service >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001147 > < JDBC service stop. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001149 > < stopping the JDBC service performed. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < MessagingBridge > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-200001 > < messaging bridge has shut down successfully. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040308 > < service JMS suspends >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040107 > < 8 cancelled by default connection factories. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040015 > < stop JMS is done >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >
# < October 1, 2015 4:18:24 PM CDT > < critical > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734304988 > < BEA-000362 > <Server has failed. Reason: at least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If database is chosen, must be set so DataSourceForAutomaticMigration. >
# < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state changed to FAILED. >
# < October 1, 2015 4:18:25 PM CDT > < error > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000383 > < is not an essential service. The server shuts itself down. >
# < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. >
# < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000236 > < stop run > discussions.
# < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000238 > < judgment made. >

It may sound crazy that I am answering my own post. As he complains about MigrationBasis. I tried to go to the config.xml file and changed

Cluster-0

unicast

database

TO

Cluster-0

unicast

consensus

And at least I was able to restart Server Admin and go to the Server Admin page. The Cluster-> Configuration-> Migration is always on view from database as the basis for Migration.

Joe

How to use the Precendence_rules.csv file to define the rules of priority in integration ATG-short

Hello
I'm integrating ATG 10.1.2 Catalogue of products with short. I am successfully able to publish data from ATG to store short CASE file and run the update of the base.
I used the model of integration of catalog:
http://docs.Oracle.com/CD/E35827_01/ToolsAndFrameworks.310/PDF/ProductCatalogDTGuide.PDF
The problem I am facing is, I have a dimension created from the structure of the ATG catalogue. I also have dimensions that I created in developer studio.
I want to apply priority rules on the dimension, which I created in dev studio. using the Sun. by coming to the dimval CASE record store. Because I'm not able to view the dimensions to the CASE record store I can't define the rules of priority in dev studio.
Page no. 12 of the guide above, they suggested that I use this precedence_rules.csv file in < app >/config/api - entry directory. I tried all the possible permutations and combinations to add priority rules by using this file, but they still do not work (I checked in JSP REF). All other prules I created in the studio of dev (between dims created in dev.studio) are being created.
Another doubt, I must settle prules on a Sun. Val a dimension named product.category (coming from the record store Sun). Is this format I used below correct (I used the Windows format of folklore as suggested in the guide)?
Precedence.source_dimension_name, Precedence.source_dimval_spec, Precedence.target_dimension_name, Precedence.type
response of Product.Category/Accessories, 102016, Accessories 1, sheet
Ideas/pointers would be greatly appreciated.
I have no way of knowing that my FCM/ConfigurationGeneratorForge is actuall read this file because it didn't we no log being generated.
Thank you
Arjun

I think I understood the problem I had. FCM correctly reads the precedence_rules.csv file, but it supports the priority rules for the dimensions of the root level. I could create a prule for "product.category" (it is NOT a dimension of autogen) which is a dimension created by the components of indexing of the ATG.

It supports mapping prules for dims created in dev.studio and those created from on the side of the ATG and vice versa.

When I tried to add the "product.category/accessories" as the size of the CBC in the priority rule, it does not work. "Accessories" are a dimval under "product.category" and it doesn't have an entry in the record of the CASE of the application schema store. I guess that's the problem that prevents me to add prules to the dimval.

If someone managed to create the rule of priority for a dimval, let me know.

Any help would be greatly appreciated.

Kind regards

Arjun

Mobile applications - target component using the component of reference - JSON is not defined in the scope

Application based Mobile Apps to integrate angular with AEM and transfer data to angular range of AEM using angular.json.jsp and controller.js.jsp. When I am using this standalone as a component and drag to the page that is based on the angular model. The JSON created in angular.json.jsp is readable in controller.js.jsp with "frameworkType = angular.
When this component is written in another page, in another page trying to use within the reference element, the angular.json.jsp, controller.js.jsp does not come to the image at all.
I had a use case to create the JSON structure (to go to angular range) in one place, then all pages using the reference component. Pointers would be useful

Hi Sandeep,

The best recommendation I can offer at this point is to create an extension of the component/libs/foundation/components/reference that includes the node of cq: model by specifying frameworkType: angular and supports transmission by proxy of applications angular.json and controller.js to the resource "referenced". I've hacked together an example of component to prove:

Mobile reference component example · GitHub

Hope this helps,

Bruce

Data resources not defined when you perform commissioning programmatically using the API of the IOM

Hello
I use code below for the provision by programming a resource to a user, but the resource data is filled. The only fields get populated are those who have prepopulate fixed adapters.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Data com.thortech.xl.vo.ResourceData = userIntf.provisionResource (Long.parseLong (userId), objectKey);
long userObjectInstanceKey = Long.parseLong (data.getOiuKey ());
long objectInstanceKey = Long.parseLong (data.getObiKey ());
Hashtable InputHash = new Hashtable();
Fill out the entry below with data from object
for (int b = 3; b < row.length; b ++)
{
System.out.println (getTimeStamp () 'value of parameter', header [b] + "=" + row [b]).
inputHash.put (header [b], [b] row);
}
Sets the data object
formIntf.setProcessFormData (objectInstanceKey, inputHash);
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--
UZ

UZ, you use the wrong key here, it is the key to the OBI, pretty ORC touches to set the data form. Get the key of the user to help process instance

tcResultSet resultGetObjects = (usr_key) userOperationsIntf.getObjects;

int countResultGetObjects = resultGetObjects.getRowCount ();

for (int j = countResultGetObjects; j--> = 0 ;) {

resultGetObjects.goToRow (j);

If (resultGetObjects.getStringValue("Objects.Name").equalsIgnoreCase ("object name"))

{

System.out.println ("instance key:"+ resultGetObjects.getStringValue ("process Instance.Key") ");

}

Mark it is OK if your question is answered *.

Defining the new path for the data files for restoring using the VALUE of NEWNAME FOR DATABASE

Version: 11.2.0.3 Linux

Today, I had to do a restore RMAN to a new server and I came across the post following RTO on the VALUE of NEWNAME FOR DATABASE

ALTER database open resetlogs upgraded; error to throw

So, I thought to use it to indicate the new location of the data files to restore.

That's what I did
===================

Restore the control file and catalog items to backup using the command of CATALOGUE START WITH. Then I started the restoration

$ rman target / cmdfile=restore.txt

Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:40:41 2012

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: SPIKEY (DBID=2576163333, not open)

RMAN> run
2>  {
3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey';
4>  restore database  ;
5>  }
6>
7>
8>
executing command: SET NEWNAME
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of set command at 07/26/2012 04:40:43
RMAN-06970: NEWNAME '/fnup/hwrc/oradata/spikey' for database must include %f or %U format

Recovery Manager complete.

Don't know how it worked for Levi without %f or %U. So, I added %f

 $ vi restore.txt
 $ cat restore.txt
run
 {
 SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
 restore database  ;
 }


 $ rman target / cmdfile=restore.txt

Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:45:45 2012

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: SPIKEY (DBID=2576163333, not open)

RMAN> run
2>  {
3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
4>  restore database  ;
5>  }
6>
7>
8>
executing command: SET NEWNAME

Starting restore at 26-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK

channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /fnup/hwrc/oradata/spikey/1
channel ORA_DISK_1: restoring datafile 00002 to /fnup/hwrc/oradata/spikey/2
channel ORA_DISK_1: restoring datafile 00003 to /fnup/hwrc/oradata/spikey/3
channel ORA_DISK_1: restoring datafile 00004 to /fnup/hwrc/oradata/spikey/4
channel ORA_DISK_1: restoring datafile 00005 to /fnup/hwrc/oradata/spikey/5
channel ORA_DISK_1: restoring datafile 00006 to /fnup/hwrc/oradata/spikey/6
channel ORA_DISK_1: restoring datafile 00007 to /fnup/hwrc/oradata/spikey/7
channel ORA_DISK_1: restoring datafile 00008 to /fnup/hwrc/oradata/spikey/8
channel ORA_DISK_1: restoring datafile 00009 to /fnup/hwrc/oradata/spikey/9
channel ORA_DISK_1: reading from backup piece /u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
channel ORA_DISK_1: errors found reading piece handle=/u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
channel ORA_DISK_1: failover to piece handle=/u07/dump/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk tag=SPIKEY_FULL
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:56
Finished restore at 26-JUL-12

Recovery Manager complete.

As you can see, RMAN restore data files to the desired location. But the data file names ended up as

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -----------| Holy Cow |-----------------------------

So I had to rename each file as below

$ mv 1 /fnup/hwrc/oradata/spikey/system01.dbf
$ mv 2 /fnup/hwrc/oradata/spikey/sysaux01.dbf
$ mv 3 /fnup/hwrc/oradata/spikey/undotbs01.dbf

I would have been better in execution of the order for each data below file

SET NEWNAME FOR DATAFILE

Now, I think, there is no advantage in using NEWNAME SET of DATABASE to. Only the disadvantages. I did anything wrong above?

Martin;

On the issue of the VALUE of NEWNAME FOR DATABASE, you must specify at least one of the first three of the following substitution variables to avoid collisions of names: %b f % U. see semantic entry for TO 'filename' for a description of the possible substitution variables.

You use %f

%b

Specifies the filename without the fully qualified directory path. For example, the datafile name /oradata/prod/financial.dbf is transformed to financial.dbf. This variable enables you to preserve the names of the datafiles while you move them to different directory. During backup, it can be used for the creation of image copies. The variable cannot be used for OMF datafiles or backup sets.

%f

Specifies the absolute file number of the datafile for which the new name is generated. For example, if datafile 2 is duplicated, then %f generates the value 2.

%U

Specifies a system-generated unique filename. The name is in the following format: data-D-%d_id-%I_TS-%N_FNO-%f. The %d variable specifies the database name. For example, a possible name might be data-D-prod_id-22398754_TS-users_FNO-7.

Source - E10643-01

Backup and recovery reference

http://docs.Oracle.com/CD/E14072_01/backup.112/e10643/rcmsynta2014.htm

I see CKPT and I agree on that!

Best regards

mseberg

What pre sequence defines to use if the import of Apple Pro Res files

Hello
I just shot a clip with the BMCC using the apple ProRes format and want to import them into Adobe first Pro CS 5.5.
I don't know which sequence pre sets to choose when I'm in box new sequence at the beginning.
Anyone know what pre sets to choose?
Thank you.

Hi domingolamarre,

Welcome to the forum!

Here's what I'd do:
- Click 'Cancel' and do not choose a sequence preset immediately.
- Premiere Pro opens.
- Import clips.
- Drag one of the clips on the button new item at the bottom of the project Panel.
- A new sequence corresponding to parameters of the element is created.
- Continue editing in this sequence.
Hope that helps.

Thank you

Kevin

Define the process shape and available resources using the IOM APIs
Hello

I'm provision the resource in the IOM with the APIs of the IOM. I know that the API to use is provisionObject (long plUserKey, long plObjectKey). The problem is that I have some data to be set manually on the form of courses, so I have to send it via the API.

Please guide me how can I set the shape of process data and then provide a resource of IOM with the APIs.

Thank you.

Rahul
You can do it in both directions.
1. you can use adapter pre-population.
2. you can use the API.
http://docs.Oracle.com/CD/E21764_01/apirefs.1111/e17334/Thor/API/operations/tcFormInstanceOperationsIntf.html#setProcessFormData_long__java_util_Map _

extract the information from the object put into service

http://docs.Oracle.com/CD/E21764_01/apirefs.1111/e17334/Thor/API/operations/tcUserOperationsIntf.html#getObjects_long _

That
prntPrvsndPrsInsKey - retrieves the Instance.Key process for provisioned resource object
hashPrntData - a card that conatins keys as process form column name / value in the form of data.

tcforminstanceoperationsintf.setProcessFormData (prntPrvsndPrsInsKey, hashPrntData);

Thank you.
Kuldeep

How to update when the defined condition is to find using the join
Hello everyone
I want to update a column of the table, and the value can be found using another table
then, how should I update using the join in the set condition
Suppose there are 2 tables and 5 column are frequent at home
Now, I want to update a column by using join conditions

Suppose that
```
select a.column5
from table_1 a, table b
Where a.col1=b.col1
and a.col2=b.col2
    .
    .
    .
and a.col8=1000000002
```
It's the Party join now I want to use guess a.column5 in the fixed part of the update
```
update b
set b.col5= a.col5
```
You must use your pk in the query.
```
update table b
set b.col5= (select a.column5
                          from table_1 a
                      Where b. = a.whatever
```
This problem is with your query logic... read it again.

Using the Dollar sign ($) in an implementation of the user-defined function
Hi all

Just a quick question: how would you use a dollar sign ($) in the (Oracle) implementation of a user function? I ask because the table name that I use in the application happens to contain a dollar sign (I$ _FACT_SALES) and post the results I get now, ODI bed the $ as a reference to a variable, the sign $ so my name removed from the table during execution (I_FACT_SALES). Is there something like a backslash or some other character that could be inserted before the $ for him be part of the name of the table?

Any response would be greatly appreciated.

Thank you very much
Marco
You have 3 options:

1.) try using the tablename parameter in the following quotations: ' MY$ TABLE "or maybe MY$ $TABLE using double symbol $
or
2) 2) I found this snippet: odiRef.getInfo (\\u0022DEST_WORK_SCHEMA\\u0022) + \\u0022.\\u0022,\\u0022\\u0022)?. "So on these lines, so that you can use \\u0022 as a symbol.
You can see the similar problem/solution/explanation
Re: Expression regular wierdness - problem with the character $

or
3.) change the prefix work Tables in the topology manager > physical schema > Your_Schema
E$ _, $ CAN, I have$ _ something like ERR_, SRC_, TD4100

Published by: Ace2 on December 2, 2009 09:57

I can't have javascript must be activated using the normal procedure on Firefox 40.0.2. How can I do this?

I loaded firefox 40.0.2 and I can not activate Javascript. I went into the menu screen java and javascript is enabled, but all my apps are running javascript isn't see it as enabled. JavaScript works on IE, but I prefer to continue to use Firefox.

You can check the pref Network.protocol - handler.external.javascript on the topic: the configuration page for you ensure that it is the default value (false).

You can use the search bar on the topic: page config to filter javascript.
If other prefs javascript show user defined (in bold), then you can reset them as well.

You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.
- http://KB.mozillazine.org/about:config

How to change the search engine when you use the functionality of Firefox Home button Search?

In Firefox itself, I have configured duckduckgo as my default search provider.

But when I use the host Firefox search button it is always defined on google and I don't see any possibility to change that?

I love the Firefox Home button Search (or whatever we call it) otherwise, but it's annoying that it does not use the default Firefox.

I use the Google Launcher now.

Hi mrt181, it is planned to use the same search engine as in firefox - however, there is a bug at the moment, so it does not apply in all situations.
usually, it will be enough to change the default engine in firefox back once to work around the problem in the search widget and get the same as set in the browser search provider.

Use the message filter to export the message?

I would like to automatically export some messages as text files in a folder on my hard drive. I thought that I would be able to define a message filter to do this, but to "perform these actions", there is no apparent way to run or use a plugin from the Tools menu. Is there a solution? I currently use the ImportExportTools plug in manually copy files, but it works well for me because it takes a long time and don't update.

My main wish is to keep all messages from certain clients available on a server to any computer, readable regardless of whether or what e-mail program is installed, organized with other documents from the same customer. If there is another way to achieve this other than the export of text messages, please let me know.

Thank you.

The add-on to FiltaQuilla offers an option to "Save as Message file" as a filter action. I have not used this particular feature myself.

http://mesquilla.com/extensions/FiltaQuilla/

Am unable to use the master password, when I try to add the 'OK' button will not highlight or save it.

I recently uninstalled then reinstalled Firefox but now can't use the master password. The 'OK' button will not activate, won't save password.

Thank you
Marilyn Brann

It is possible that there is a problem with key3db and signons.sqlite files that store the encrypted names and passwords in Firefox.

In the Firefox profile folder, rename the files key3db and signons.sqlite.

You can add .old files (key3.db.old and signons.sqlite.old) names or move them to another folder to make it possible to cancel the action.

You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.

If that worked, then you can delete the renamed files that are no longer needed.

See:
- "Troubleshooting" in http://kb.mozillazine.org/Password_Manager
- http://KB.mozillazine.org/Profile_folder_-_Firefox

E2500 defined to use the Slingbox.

Similar Questions

Maybe you are looking for