Mobile applications - target component using the component of reference - JSON is not defined in the scope

Similar Questions

• I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  Hello

  I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  When you try and create a new application of MAF it will prompt you to insert the path JDK8.

• How do I reinstall the old applications backed up using the backup recovery mgr software

  I fell off my machine after reloading some files of the .NET framework.  Because windows is more loaded, I used the HP recovery discs and made a backup complete both DVD and USB from my hard drive.  Then I went ahead and allow the recovery disk reformat and reload the factory system.  I went to use the recovery to re - install all applications and files, but it only copied all the stuff in a folder on my drive C:\.  IF ten to twelve apps (quicken, genealogy, adobe paintshop & pdf, MS SQL) are not loaded. It seems that my entire system sits in a file folder.  Great if I wanted to only data, but I really want to use applications without reloading everything from scratch.  I found no executable file to start such a reload. I was happy with my machine before the accident, and if I could do a simple recovery from before I installed these files, I would have done it instead of the reformat.  Alas, whatever the back backwards, I went, windows was pretty much DOA.

  I have a HP Pavilion with win7.

  Is it a lost cause?

  The HP Recovery software backup only a specific list of types of data files and the folder they reside in. No programs were backed up, and even if they were, they would not work properly. You will have to reinstall all the software that you previously installed.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Multiple instances of Application when you use the background thread

  Hi all

  I recently added a background thread in an application that is launched from an other point of entry. This background thread will constantly (every X seconds) carry out checks of RMS and compares the timestamps. When recalcitrant, he sends a notification to the user who launches the application when clicked. The problem is...

  When the user clicks on the notification, it will open the application normally (with the icon and everything), but it also opens a second instance that does not have an icon. I have concluded that the code that actually launches the request isn't the culprit (because if I take out, it nevertheless opens the second instance). This makes me think that it has something to do with the ApplicationDescriptor.

  My notification Manager has this line:

  ApplicationDescriptor appDescriptor = new ApplicationDescriptor (ApplicationDescriptor.currentApplicationDescriptor (), application name, new String [] {});

  If I change this to only return the currentApplicationDescriptor() or add the arguments in the array of strings, notifications do not work.

  Can anyone think of a reason why this is happening?

  I solved the problem I had.

  In the end, I ended up changing this code:

  final ApplicationDescriptor mainDescription = ApplicationDescriptor.currentApplicationDescriptor ();
  final ApplicationDescriptor appDescriptor = new ApplicationDescriptor (mainDescription, application_name, new String [] {});

  TO:

  moduleHandle int = CodeModuleManager.getModuleHandle (APPLICATION_NAME);
  ApplicationDescriptor mainDescriptor;

  If (moduleHandle! = 0)
  {
  ApplicationDescriptor apDes [] = CodeModuleManager.getApplicationDescriptors (moduleHandle);
  apDes = mainDescriptor [0];

  ApplicationMessageFolderRegistry folderReg = ApplicationMessageFolderRegistry.getInstance ();

  If (folderReg.getApplicationFolder (NotificationManager.INBOX_FOLDER_ID) == null) {}
  notificationManager.init (folderReg, mainDescriptor);
  }
  }

  Instead of using the currentApplicationDescriptor(), I was referencing the module of the application itself using the CoreModuleManager. My init method takes in the ApplicationDescriptor and use it for everything.

  Thanks to all who have any time to read my post!

• WARNING: Incompatible Arg. You can't use stack Variables If generating series is not defined

  What does this message mean?

  "WARNING: incompatible Arg. you can't use stack Variables If generating series is undefined."

  Where can I put generate series only?

  Thank you

  Derek

  Hi Derek,.

  Not all LabVIEW C Generator settings are compatible with each other. In this case, you must define generate series only (aka 'disable parallel execution') If you want to generate the code uses the variable stack.

• How to calculate the variable on the target, but use the value on the source?

  Hi ODI gurus!
  
  I use LKM MS SQL for Oracle (bcp-> sqlldr).
  I have a variable which is calculated from tables on the target DB (oracle).
  I would use this calculated value in the filter on the source, but I get error ODI is refreshing to variable on the source database.
  
  It is possible to update value of variable on the target technology and using calculated value on the source technology?
  
  Thanks in advance!

  Step 1. In the variable - > refreshing tab - > select the schema and the application required for the Oracle database, so you when you refresh the variable, you get the desired result (for example, the ex - value 25 or whatever you are looking for)
  step 2. Call this variable in the Source filter, where the table_source. COLUMN = #VARIABLE_NAME
  Step 3. Call the Variable in refreshing mode, call the interface.
  So that when the variable is updated to the value that is passed and the source table to get the value of its filter.

  If you do pretty much the same things, can you please paste the error, query and your filter condition. So that we can guide you accordingly.

• How are mobile and tablets layouts using the new sensitive update?

  I'm trying to decide if I want to apply the new update of reagent Muse and risk dealing with software problems and a learning curve, or if I should just continue with the older version. I can't find enough information tutorial to tell me exactly how this will work.  I hope that this question will make sense and thanks for any help:

  I'm working on a site that I had designed to "hack" a significant effect using lever of QooQee of page layout, so I've already compressed and versions mobile site that appear as versions of the homepage - Minies, but adapted to a more narrow screen.   As a reactive office site, it works 'just ok', but could certainly be improved.   Mobile and tablet of sites, because they are static, fine work and are made up of the way I want them to be.   But I don't know how the new program will result in these versions. I always 'shall' separate layouts for Tablet and mobile, or will/can they now be included in a site of unique, primary, sensitive desktop using different views breakpoint?

  If, then, a much more important question is how various devices with screen/resolutions sizes hen will use these alternate provisions: to decide WHAT specific breakpoint display is used for mobile and tablet devices, respectively and in general?  Or the CAMERA decides what breakpoint view is used, based on the screen resolution or size of the screen or something else?

  With the old Muse, I am currently able to dictate exactly how an overall composition to appear on ANY tablet or mobile - even if the page layout design width does not match the device width or to the browser - because WHAT THE DESIRE COMPOSITION SCALES TO FILL the SCREEN, no MATTER HOW WIDE MY setting PAGE IS.  Can I still expect this behavior, or I will now compose layouts even more in order to ensure that the composition looks good on any possible device? 

  Even with a good design "fluid", it is inevitable that there will be intermediate points during which a page layout is less ideally composed from an artistic point of view.   I don't care if a user "cross" these points while scaling a browser, but, ultimately, I WANT to BE CAPABLE OF DICTER EXACTLY HOW YEAR COMPOSITION WILL APPEAR ON ANY SCREEN TOTAL.

  Again, hope this is logic, and thank you for any idea.

  You can create a 'hybrid' site of fluid layouts fixed device and stop points. Muse paid tribute to previous how to design the page layout. Technically, you just set your breakpoints to the more narrow view that you expect to have a desktop computer, the default 960, for example.

  David

  Creative muse

• How to run a web application in JDeveloper11g using the jdk 1.4.2_04

  Hello
  
  I'm trying to run a jsp/servlet web application in JDeveloper 11 g which was developed in JDeveloper 10.1.3. I migrated the application for JDeveloper 11 g and when I tried to build the project, it is throwing an exception as * "' error: project is not configured to use at least JDK 6. * after changing the version of jdk 1.4.2_04 for under project properties/libraries & Classpath/Java SE Version." There are other parameters to change? Can someone guide me on this.

  Hello

  JDeveloper 11 g is a JEE 5 environment (so according to JSE 5), including medicines generic and other features. It so there's no way that you will always be able to run using any environment 1.4.x.

  Kind regards

  ~ Simon

• I can't ' save target under "using the right click! Any suggestions please.

  I need to record images or mp3s from a web page but cannot see 'save target as' right click function. Help, please.

  "Save target as" for IE, the equivalent in Firefox is "save the link under.

• Applications cannot run using the latest device software and SDK

  I have an application of stunts that I try to run on the alpha of dev, but I get this error: (which occurs after the splash screen, then first screen appears)

  "Launch BB10BabyNames" has encountered a problem:

  Error in the final launch sequence

  When I click on "details > ', I get:

  Error in the final launch sequence
  Failed to execute the command of MI:
  -break-insert t main f
  The debugger back-end error message:
  Cannot access memory at address 0 x 2310
  Cannot access memory at address 0 x 2310

  ...

  The way I've updated by SDK had to go on the native menu 'Help' and "Update SDK", as described on the web.

  In the top drop down menu, I selected:

  "BlackBerry 10 native SDK 10.0.9.2318"

  And my OS version is:

  10.9.9.339

  I noticed that my:

  Project-> Build Configurations-> value activates

  ... has been configured for the device debugging

  But when I went to Run-> Debug Configurations, I selected "device-Release.

  I put this in the "device-Debug' and now I can start the application.

• Change of file system after the addition of new technologies using the scope of technology

  Hello
  
  I checked - in my project Jdeveloper in ADE. I guard, check-in, all of my new project files in ADE. Now, I've added two more/component technology (ADF Web Application Support Library, ADF business components) using my project (Project Properties-> scope of technology). What file I need to change/add in my project in ADE?
  
  Thank you
  Vishal

  I checked - in my project Jdeveloper in ADE. I guard, check-in, all of my new project files in ADE.

  The question would be true for any source control system.
  What to checkin/merger of views is jpr file in your project.
  All entries in your 'field of application of technology' are maintained...

  In JDeveloper, you can just right-click on the name of your project-> releases-> consignment/validation

  Published by: Jang Vijay Singh on October 29, 2009 14:47

• Why none of the mobile applications are compatible with my Samsung Galaxy Note 10.1 Tablet? I can only use some of the mobile applications with my Samsung Galaxy Note 4

  Each Adobe Mobile App I want to install from the game store Android Google indicates that it is not compatible with my Samsung Galaxy Note 10.1 tablet, but some are compatible with my phone Samsung Galaxy Note 4. I prefer to use mobile apps on my tablet on not on my phone. Can someone explain why I can't use mobile apps on my tablet. I thought that mobile applications are compatible with the tablets and phones?

  Please refer to why none of the mobile applications are compatible with my Samsung Galaxy Note 10.1 Tablet? I can only use some of the mobile applications with my Samsung Galaxy Note 4

  (Double Post)

• How we communicate between 2 Mobile Applications developed in the MAF

  We have a scenario in which we want to launch another mobile app with some input parameters. Please let me know a way to do it. Can be done by using the scope Managed beans?

  Hello

  Yo taste which is documented here?

  4 definition of a Mobile Application (version 2.0.0.0.0)

  Frank

• No 'Mobile Applications' option under the menu 'Site '.

  I am builing a mobile application within DreamWeaver using jquerymobile. I have the open site but when I go into the Site within DreamWeaver menu I have no option for Mobile Applications.

  What you should be able to do is to choose:

  Site-> Applications-> configure the Application infrastructure

  But I have no option for Mobile Applications. It is not just grayed out, it is completely absent.

  I guess you follow a tutorial or something. Mobile applications is no longer a stand-alone option under 'Site' in CS6 go. If you're on CS6, you won't find it.

  Instead, define a site regularly and use the Service of Phonegap Build to build your application.

• How to use the Shell of the user interface with multiple applications (ear)

  I use 11.1.1.6 JDeveloper.

  I want to modularize the functionality in applications (ears) and use the Shell of the user interface as a navigation mechanism between applications and single entry.

  Is this good?

  What is the use of Shell of the user interface best practices.

  What about security (2 AA)? Security of the ADF?

  Thank you

  Hi user,

  You can use the shared library ADF function if you would like more information

  http://andrejusb.blogspot.AE/2010/07/deploying-ADF-applications-as-shared.html

  use the adf security