E280 continually close
Hello
I looked here and found a few steps to try, but they were not successful so I write.
I have an e280 8 gig. I bought it last spring.
I listen to the thing constantly, but last week, it began to close, and it's hard to start back. If I press the power button to an account of 20 and then again for a number of 2 will come back on.
I tried syncing with my computer and see what it needs updates, I deleted some stuff that I have still a gig and a half of memory left. I tried to replace the battery. It is still made.
What I listen to when he does it is audible audiobooks. And it was only started last week. I'm at my wits end as its really difficult to enjoy a book when he plays anywhere from a minute to 10 before stopping.
I tried locking and pressing the round button arrow. It did not work. reinstalling the battery has failed. What else can I try?
Thanks in advance for your help
Ellionne
I ended up reformatting my camera. This seems so far have fixed all the problems I had. Thank you all for your help (and Spockisms!)
Tags: SanDisk Sansa
Similar Questions
-
Cloud of continually closes, and closes all the fonts I have loaded? I have to log in several times a day, someone knows why?
Please follow:
-
Its continuous close the program
Have a desktop Dell Dimension 4550, XP SP3. Only use this machine for my email through IE8. A 'narrow' ongoing program get her often. Usually just turn her off. Any ideas on what is the cause? Computer and IE8 seem to be working otherwise.
Hi MikeTinVA,
· This happens when you work with the internet?
· If so, do you see what happens when you work on a particular Web site?
This could be the cause if pop-ups are blocked.
However, try the following steps:
a. right click on the volume icon in the taskbar
b. Select sound
c. window properties of sound and audio device open
d. click the sound
e. under program events
f. Select and sound under its drop-down the menu voice against zero
You can also check out the link below:http://www.microsoft.com/windowsxp/using/accessibility/assignasound.mspx
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I tried to install the 3.6.6 update, but he asked me to close Firefox. I did it, but he continues to show the same message "close Firefox pour continue (close Firefox to continue).
This has happened
Each time Firefox opened
== I tried to update Firefox
Make sure that there is no Firefox to left of process in the Manager of tasks (Shift + Ctrl + ESC, tab process)
See also http://kb.mozillazine.org/Software_Update (Software Update doesn't work does not correctly)
-
BlackBerry smartphones continues to receive notification "certificate expired".
for the last two days, I get a notification that says "you are trying to open a secure connection, but the server certificate has expired"... this notification comes up about 30 times a day and no matter what I click on when it rises (continue, close the connection, or view the certificate) continues to be.
I already have the latest OS for my camera, the date and time is correct and ive tried with the two time network and time of blackberry (told me that sometimes he from time to time having blackberry causes this problem) and nothing works.
the phone works fine, it's just that the notifications are getting really boring. What should I do?
I had the same problem began Friday for me... I think that I reduced to enforcement "IUD".
executant.282 on the "BOLD" and he just got mad when I was trying to do something, so I did a clean install and made 1 app at a time until I thought about it well... I liked loopt, but this isn't interesting headache right now.
-
Firefox does not start - claims that it is already open
Firefox does not start. He claims to be already running, but that doesn't seem to be the case.
I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »
There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."
Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."
I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.
I also turned off my computer and uninstalled and reinstalled Firefox several times.
I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.
My PC runs Windows 10, incidentally.
Try to delete the parent.lock file in the Firefox profile folder.
- C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
- http://KB.mozillazine.org/Profile_folder_-_Firefox
See:
- http://KB.mozillazine.org/Profile_in_use
- https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding
What security software do you have?
Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).
If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".
- (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
- (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.
-
It happened one month almost on a daily basis.continues close unexpectedly.please help
Anonymous UUID:
Sat Apr 16 05:11:26 2016
Panic report *.
panic (cpu 0 0xffffff80003ce40a appellant): Kernel trap at 0xffffff7f827954f0, type 14 = page fault, registers:
CR0: 0 X 0000000080010033, CR2: 0 X 0000000000000134, CR3: 0X00000002C423309B CR4: 0X00000000001627E0
RAX: 0 X 0000000000000134, RBX: 0XFFFFFF803CD04DD8 RCX: 0 X 0000000000000000, RDX: 0X000000000000004D
RER: 0XFFFFFF91ECD33560, RBP: 0XFFFFFF91ECD33740, IHR: 0 X 0000000000000002 RDI: 0 X 0000000000000000
R8: 0X000000000000FFFF, R9: 0 X 0000000000000001, R10: 0 X 0000000000000002, R11: 0XFFFFFF9250DD0000
R12: 0X00000000183B1101, R13: 0X00000000183F1101, R14: 0 X 0000000018431001, R15: 0X00000000182B1101
RFL: 0 X 0000000000010286, RIP: 0XFFFFFF7F827954F0, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010
Lack of CR2: 0 x 0000000000000134, error code: 0 x 0000000000000002, CPU error: 0x0, PL: 0
Backtrace (CPU 0), frame: return address
0xffffff91ecd331f0: 0xffffff80002dab12
0xffffff91ecd33270: 0xffffff80003ce40a
0xffffff91ecd33450: 0xffffff80003ec273
0xffffff91ecd33470: 0xffffff7f827954f0
0xffffff91ecd33740: 0xffffff7f8279bd2d
0xffffff91ecd337b0: 0xffffff7f82742939
0xffffff91ecd337e0: 0xffffff7f8279bab9
0xffffff91ecd33820: 0xffffff7f8274299a
0xffffff91ecd33850: 0xffffff7f8279ba2a
0xffffff91ecd33890: 0xffffff7f82742daa
0xffffff91ecd33b10: 0xffffff7f8274242b
0xffffff91ecd33b50: 0xffffff7f827422de
0xffffff91ecd33b80: 0xffffff7f827419b4
0xffffff91ecd33bc0: 0xffffff7f8279befd
0xffffff91ecd33be0: 0xffffff80008df277
0xffffff91ecd33d20: 0xffffff8000397cc0
0xffffff91ecd33e30: 0xffffff80002df283
0xffffff91ecd33e60: 0xffffff80002c28b8
0xffffff91ecd33ea0: 0xffffff80002d2665
0xffffff91ecd33f10: 0xffffff80003b8bda
0xffffff91ecd33fb0: 0xffffff80003eca96
Extensions of core in backtrace:
com.apple.iokit.IOAcceleratorFamily2 (205.3) [1B6944F0-F0F4-26-892C-46EB6C5C743 3D 3]@0xffffff7f82719000-> 0xffffff7f82792fff]
dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f80b2c000 0xffffff
dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f81629000
com.apple.driver.AppleIntelHD5000Graphics (10.1.4) [D35C5903-CC83-3824-8F8B - 810-8 A8A3430]@0xffffff7f82793000-> 0xffffff7f82800fff]
dependency: com.apple.iokit.IOSurface (108.2.1) [7B01F01F-CC13-328B-BA71-E574C5FA3E25] @ ff7f81498000 0xffff
dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f80b2c000 0xffffff
dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f81629000
dependency: com.apple.iokit.IOAcceleratorFamily2 (205.3) [3]@0xffffff7f82719000 1B6944F0-F0F4-26-892C-46EB6C5C743 3D
The process corresponding to the current thread BSD name: com.apple.WebKit
Mac OS version:
15E65
Kernel version:
15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64
Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839
Text __HIB base: 0xffffff8000100000
Name of system model: MacBookPro11, 4 (Mac-06F11FD93F0323C5)
Availability of the system in nanoseconds: 109407725656992
last load kext to 4551417542: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f8231c000 size 32768)
Finally unloaded kext to 109463299999: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f82c19000 size 8192)
kexts responsible:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 110.21.18
com.apple.driver.ApplePlatformEnabler 2.6.0d0
com.apple.driver.X86PlatformShim 1.0.0
com Apple.filesystems.autofs 3.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleGraphicsDevicePolicy 3.7.7
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleHDA 274.7
com Apple.Driver.pmtelemetry 1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothSerialManager 4.4.4f4
com.apple.driver.AppleIntelHD5000Graphics 10.1.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHV 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4
com.apple.driver.AppleBacklight 170.8.9
com.apple.driver.AppleLPC 3.1
com.apple.driver.AppleSMCLMU 208
com.apple.driver.AppleCameraInterface 5.46.0
com.apple.driver.AppleIntelFramebufferAzul 10.1.4
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.AppleThunderboltIP 3.0.8
com.apple.driver.AppleMCCSControl 1.2.13
com.apple.driver.AppleUSBCardReader 3.7.1
com.apple.driver.AppleTopCaseHIDEventDriver 86
com.apple.driver.AppleUSBTopCaseDriver 86
2.8.5 com.apple.iokit.IOAHCIBlockStorage
com.apple.iokit.AppleBCM5701Ethernet 10.2.0
com.apple.driver.AirPort.Brcm4360 1040.1.1a6
com.apple.driver.AppleAHCIPort 3.1.8
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 38
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 4.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 4.0
com.apple.driver.AppleAPIC 1.7
com Apple.NKE.applicationfirewall 163
com Apple.Security.Quarantine 3
com.apple.security.TMSafetyNet 8
com Apple.kext.Triggers 1.0
com.apple.driver.DspFuncLib 274.7
com.apple.kext.OSvKernDSPLib 525
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOSurface 108.2.1
com.apple.driver.CoreCaptureResponder 1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4
com.apple.iokit.IOBluetoothFamily 4.4.4f4
com.apple.driver.AppleHDAController 274.7
com.apple.iokit.IOHDAFamily 274.7
com.apple.iokit.IOAudioFamily 204.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleGraphicsControl 3.12.6
com.apple.AppleGraphicsDeviceControl 3.12.6
com.apple.iokit.IOAcceleratorFamily2 205.3
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 6.0.0d7
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleSMBusController 1.0.14d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7
com.apple.iokit.IOUSBMassStorageDriver 1.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7
com.apple.driver.AppleThunderboltDPInAdapter 4.1.3
com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3
com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.usb.AppleUSBHub 1.0.1
com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1
com.apple.driver.AppleHIDKeyboard 181
com.apple.driver.AppleMultitouchDriver 304.10.2
com.apple.driver.AppleHIDTransport 5
com Apple.Driver.USB.cdc 5.0.0
com.Apple.Driver.USB.Networking 5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1
com.apple.driver.CoreStorage 517.20.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.AppleThunderboltNHI 4.0.4
com.apple.iokit.IOThunderboltFamily 6.0.2
com.apple.iokit.IO80211Family 1110.26
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com Apple.Driver.corecapture 1.0.4
com.apple.iokit.IOAHCIFamily 2.8.1
com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1
com.apple.driver.usb.AppleUSBXHCI 1.0.1
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 900.4.1
com.apple.iokit.IOUSBHostFamily 1.0.1
com.apple.driver.AppleUSBHostMergeProperties 1.0.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com Apple.Security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 417.2
com.apple.iokit.IOStorageFamily 2.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 4.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com Apple.KEC.pthread 1
com Apple.KEC.corecrypto 1.0
Model: MacBookPro11, 4, MBP114.0172.B09 of BootROM, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, MSC 2.29f24
Graphics card: Intel integrated Iris Pro, Intel Iris Pro,
Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533642465238412D50422020
Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533642465238412D50422020
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 152), Broadcom BCM43xx 1.0 (7.21.95.175.1a6)
Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports
Service network: Ethernet, Ethernet, en4 Thunderbolt
Network service: Wi - Fi, AirPort, en0
PCI card: Apple 57762-A0, controller, Ethernet, Thunderbolt@195,0,0
Serial ATA Device: APPLE SM0256G, 251 GB SSD
USB device: USB 3.0 Bus
USB device: Apple keyboard / Trackpad
USB Device: USB Bluetooth host controller
USB device: USB RECEIVER
USB device: USB 2.0 Hub
USB device: Series OfficeJet 4650
USB device: USB 2.0 Hub
USB device: USB printer
Bus crush: MacBook Pro, Apple Inc., 27.1
Device of lightning: lightning to Gigabit Ethernet adapter, Apple Inc., 1, 5.5
The problem may be caused by a bug in OS X, triggered by "Flash Player."
Please open Safari preferences window and select the Security tab uncheck the box marked
Enable Plug-ins
See if there is an improvement.
You can watch videos on YouTube and other sites without using Flash by installing the extension "ClickToFlash" or "ClickToPlugin' Safari. This isn't an endorsement. You should always do your own research to determine the safety and effectiveness of any third-party software before using it.
-
My cousin gave me his blackberry that he bought in the United States, T-Mobile has been the supplier of services. I use the phone with excellent service in Austria, the claimant is Orange. I was going great but now its stopped make or receive calls. When I try to make calls it displays "call failed" and used to take incoming calls or the other. I have internet with an excellent signal.
Thank you very much for your help!
jcjc2012 wrote:
This is the message that appears: "you try to open a secure connection, but the server certificate is not approved: continue, close the connection, see certificate.
I could not find the app you recommend to remove.
Yes... it's probably different than what I guessed. Normally, however, who comes from the web browser... not while performing a call... the steps that led to the receipt of this message would be so important to understand if it has nothing to do with your problem.
jcjc2012 wrote:
What do you think about Smart Dialing or call except?
Smart dialing in the + 1 country code, but Austria, where I live is + 43, I found, that's right, what I have to change?
Smart Dialing could be causal... having developed a country code other than the one you are in would be wrong. See this:
- KB20595 How to disable the smart Dial feature
Turn it off or set it to your current location.
jcjc2012 wrote:
What do you think about Smart Dialing or call except?
About the call to ban, to do something asked of me the password, but I forgot my password, possibility of reactivating the phone system?
I'm not sure call him except password... my service doesn't have this feature. But it seems (to review some user manuals) that there is a required specific password and this password is provided to you by your mobile service provider.
Good luck!
-
Certificates of blackBerry Smartphones
Hello world
I'm trying to login on my wildblue account to check my bandwidth. I did this property several times a few weeks ago. The certifcate now displays a?. When I go to the site in my browser, I get a window that says:
"You try to open a secure connection, but the server certificate is not approved."
Can I get the options to continue, close the connection, discovers certifcate and certifcate trust. No matter that one I click it loop to the same window.
If I go to tools, certificates and tries to remove it, he then wants a password stored key. I have used 2/10 with my normal passwords. I never did a password I know. Is there a default one?
How can I fix it and could someone explain what a certificate is and how they work on the phone?
I have a Curve 8330 and on V.4.3.0.124 (I know it's outdated, but I'm chicken to update.)
Thank you grace
That's what I did. I read the sticky on the password manager. I then created a password for password keeper, did a battery pull and then used the password for keeper of password for the keystore password in the certifcates. He has accepted. I then DELETED the certificate. Then I went to the browser and tried to get on the site, I tried to access to and clicked on trust. He left me, but when I return to certificates REPLACED the certificate, but it still has the? before the certificate. It seems to work, but I don't know why there is a? before the certifcate but at least now I have a password.
This same password before, I tried and it did not work and I've been on the #3 attempt.
Thanks for your help. Grace
-
Problem syncing USB of blackBerry Smartphones
Hi all... I have Pearl 8130 that I was using and sync with my MacBook Pro for some time. This week I started having a problem where the phone will be continually close and restart as soon as I connect it to the USB cable for the synchronization. I'm not aware of changes to the configuration that this would have caused, and naturally it syncs at all.
I uninstalled my PocketMac software and re-installed several times. I also looked and could not find, the "driver update" suggested in a previous post dated 07/20/2008. The people at Verizon did a hard reset on the BB and it worked for one or two synchronization process and now it stops on me even once. Of course I had just finished reorganizing all of the wipeout the Verizon person done with the hard reset. Any suggestions or any direction would be greatly appreciated.
The erase command did remove two of the three game apps I had downloaded and left. Not sure why it has not removed all three. Maybe because they were free downloads or tests.
On another note, I understand my problem with synchronization, for this time anyway. I answered 'NO' to "Auto enable mass storage Mode" option in the Media Card Options. Things seem to be working fine now.
-
You can install the first 10 items in a mac computer
Whenever I have try and install gets to a point where it is said: to continue, close applications for acrobat: update and update acrobat. I find nothing in my applications that says apps. Now what. Help, please. Thank you
Close your browser and, if you still have a problem, check your activity monitor.
-
I can't disable a constraint in SQL Developer
Here's my question:I created a table named pratique1 already.Developer SQL PL/SQL using try to run a loop as follows:DECLARE
COUNTER1 NUMBER (2);
BEGIN
COUNTER1: = 30;
ALTER TABLE pratique1
DISABLE THE CONSTRAINT PRK1;LOOP
COUNTER1: = 30;
INSERT INTO PRATIQUE1
VALUES (COUNTER1, 'test7', 8, 9);
WHEN the OUTPUT COUNTER1 > 26;
END LOOP;
END;In other words, I insert the value of the variable COUNTER1 as primary key in the field1 column tables.I run the script successfully without the ALTER TABLE CONTSRAINT... DISABLE command.Whenever I run that I had to increase the starting value of the Variable COUNTER1, so he will not attempt to insert a value pre existed twice in the primary key.So I decided to insert the command ALTER TABLE DISABLE CONSTRAINT to do not have to worry about changing the starting value.I am able to disable the constraint by using the same command in a vacuum. If I run it through the script as shown above, I get the following error:Error report:
ORA-06550: line 5, column 1:
PLS-00103: encountered the symbol "ALTER" when expecting one of the following conditions:(begin case declare exit end exception for goto if loop mod)
pragma raise return null select update while with
< an ID > < a between double quote delimited identifiers of >
< a variable binding > < < continue close check out lock remove current
Insert restore open savepoint sql execute commit forall
purge pipes of fusion
06550 00000 - "line %s, column % s:\n%s".
* Cause: Usually a PL/SQL compilation error.
* Action:I would like suggestions.Thank you.Your question has NOTHING to do with the sql developer.
Mark this question ANSWER and repost it in SQL and PL/SQL forum.
https://forums.Oracle.com/community/Developer/English/oracle_database/sql_and_pl_sql
The problem is that you cannot run the DDL directly in PL/SQL. You must use dynamic SQL statements to execute DDL in PL/SQL.
RUN IMMEDIATELY ' ALTER TABLE... » ;
If you need help using the correct, as forum indicated above.
-
Create an external table to import csv to dynamic action
Hello
I'm trying to import data from a csv file into a table. The csv is located on the server and I try to do an external table to copy its contents to the master data table.
I can't even save the code, without this error:
It works very well in the SQL Developer.PLS-00103: Encountered the symbol "CREATE" when expecting one of the following: ( begin case declare exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << continue close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe purge
CREATE TABLE "DATA_CSV" ( "C1" VARCHAR2(255), "C2" VARCHAR2(255), "C3" VARCHAR2(255), "C4" VARCHAR2(255), "C5" VARCHAR2(255), "C6" VARCHAR2(255), "C7" VARCHAR2(255), "C8" VARCHAR2(255), "C9" VARCHAR2(255), "C10" VARCHAR2(255), "C11" VARCHAR2(255), "C12" VARCHAR2(255), "C13" VARCHAR2(255), "C14" VARCHAR2(255), "C15" VARCHAR2(255), "C16" VARCHAR2(255), "C17" VARCHAR2(255), "C18" VARCHAR2(255), "C19" VARCHAR2(255), "C20" VARCHAR2(255) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY FTP_FOLDER ACCESS PARAMETERS ( records delimited BY newline fields terminated BY ';' optionally enclosed BY '"' lrtrim missing field VALUES are NULL ) LOCATION ('foo.csv') ); {code} The server I work on, runs on Apex 4.2.2. Thanks in advance, for your help Skirnir
-
Same code running in SQL * more edit the sql buffer vs = different results file
Hello
For the last few minutes I was scratching my head trying to understand why my little piece of code was not working.
As a result, a sample:
When run interactively, I get the following results:create or replace type booktitles_nt is TABLE OF VARCHAR2(100); / declare booklist booktitles_nt := booktitles_nt('Great Expectations','Ulysses','1984'); begin for i in booklist.FIRST .. booklist.LAST LOOP dbms_output.put_line('Book number ' || i || ':' || booklist(i)); end loop; end; /
So I try without the slash and get nowhere:1 create or replace type booktitles_nt is TABLE OF VARCHAR2(100); 2 / 3 declare 4 booklist booktitles_nt := booktitles_nt('Great Expectations','Ulysses','1984'); 5 begin 6 for i in booklist.FIRST .. booklist.LAST LOOP 7 dbms_output.put_line('Book number ' || i || ':' || booklist(i)); 8 end loop; 9* end; SCOTT@ORCL> / Warning: Type created with compilation errors. SCOTT@ORCL> show errors Errors for TYPE BOOKTITLES_NT: LINE/COL ERROR -------- ----------------------------------------------------------------- 2/1 PLS-00103: Encountered the symbol "/"
So I think, maybe I'll try it in a .sql file. So I put the first fragment of code in a file, test4.sql:1 create or replace type booktitles_nt is TABLE OF VARCHAR2(100); 2 declare 3 booklist booktitles_nt := booktitles_nt('Great Expectations','Ulysses','1984'); 4 begin 5 for i in booklist.FIRST .. booklist.LAST LOOP 6 dbms_output.put_line('Book number ' || i || ':' || booklist(i)); 7 end loop; 8* end; 9 / Warning: Type created with compilation errors. SCOTT@ORCL> show errors Errors for TYPE BOOKTITLES_NT: LINE/COL ERROR -------- ----------------------------------------------------------------- 2/1 PLS-00103: Encountered the symbol "DECLARE" 8/4 PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following: ( begin case declare end exception exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << continue close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe purge
and run it, and it works:SCOTT@ORCL> get C:\Users\J\Documents\SQL\test4.sql 1 create or replace type booktitles_nt is TABLE OF VARCHAR2(100); 2 / 3 declare 4 booklist booktitles_nt := booktitles_nt('Great Expectations','Ulysses','1984'); 5 begin 6 for i in booklist.FIRST .. booklist.LAST LOOP 7 dbms_output.put_line('Book number ' || i || ':' || booklist(i)); 8 end loop; 9* end; SCOTT@ORCL>
Can someone tell me why the behavior is different when it is run from a file when it is run, well, interactive? There seems to be some limits on what you can interactively run vs. what you can run from a script.SCOTT@ORCL> @C:\Users\J\Documents\SQL\test4.sql Type created. Book number 1:Great Expectations Book number 2:Ulysses Book number 3:1984 PL/SQL procedure successfully completed.
Thank you very much
JasonSQL * more buffer cannot contain more than one return, even if you have two - create type and anonymous PL/SQL block. Thus it-error:
Wrote file afiedt.buf 1 create or replace type booktitles_nt is TABLE OF VARCHAR2(100); 2 / 3 declare 4 booklist booktitles_nt := booktitles_nt('Great Expectations','Ulysses','1984'); 5 begin 6 for i in booklist.FIRST .. booklist.LAST LOOP 7 dbms_output.put_line('Book number ' || i || ':' || booklist(i)); 8 end loop; 9* end; SQL> / Warning: Type created with compilation errors. SQL> create or replace type booktitles_nt is TABLE OF VARCHAR2(100); 2 / Type created. SQL> declare 2 booklist booktitles_nt := booktitles_nt('Great Expectations','Ulysses','1984'); 3 begin 4 for i in booklist.FIRST .. booklist.LAST LOOP 5 dbms_output.put_line('Book number ' || i || ':' || booklist(i)); 6 end loop; 7 end; 8 / Book number 1:Great Expectations Book number 2:Ulysses Book number 3:1984 PL/SQL procedure successfully completed. SQL>
SY.
-
PLS-00103: encountered the symbol "end-of-file.
Hello
on the 11g R2, I get the following error:
Thanks for help.SQL> declare 2 m_clob clob; 3 begin 4 select 5 sql_fulltext 6 into 7 m_clob 8 from 9 v$sql 10 where 11 sql_id = '0cx8yq5fnry' 12 and child_number = 0 13 ; 14 15 dbms_output.put_line(m_clob); 16 / dbms_output.put_line(m_clob); * ERROR at line 15: ORA-06550: line 15, column 33: PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following: ( begin case declare end exception exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << continue close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe purge
Start
do something;
END;
*/*
Maybe you are looking for
-
Additional graphics in Minitour HP Pro 3130
Is it possible to add a graphics card Intel HD extra to a HP Pro 3130 Minitour, use a third and a fourth monitor?
-
I am trying to create a custom device that makes it easy for a user to configure many digital output channels. My camera is now Initializes in VeriStand without any problem. I have a hierarchical design with a folder "Output Module 1' containing 32 c
-
In Windows XP, when I go to 'Start' in the 'search' and specify a word in the name of the file and then highlight that it is a PDF file I'm looking for, it is unable to locate the file. I know that the file is there. Why is this happening?
-
I would like to know the meaning and effects of several local policies in Win 7, and I don't have much information to Win Help; It has generated more questions than answers. Here are the ones on which I want information more detailed: 1. interactive
-
Availability form opening automatically in good order sales
Hi Experts,I'm working on EBS R12, when I create an order for sale, once I get header data-> save, and then click the tab lines, service AVAILABILITY automatically opens, I don't understand why this is the case, is that someone could help with that.T