E3200 needs reboot once a day - time for the client lease problem?
It's annoying - I need to reboort my router every day to get an internet connection? I have a desktop computer and a laptop more iPads, etc. The laptop loses connectivity every day around the same time. So far, my only solution is to reboot the router. I realize that the client lease time is set to 1 day by default, but it is not supposed to ask the modem for another day of life, when this happens?
I bought Linksys because of quality, but it's frustrating!
Can anyone provide a recommendation?
Thank you!
Well, you are on a cable or DSL connection? I don't know that I'll just move forward and try to determine some tips for your router settings:
1. you use E3200 which is a double router broadband. So I think you'll find these settings:
I change the setting like QUACK says:
For the 5 GHz channel parameters, you can do channel width to 20 MHz only and channel 40 or 161...
For 2.4 GHz string parameters, you can make the channel width to channel 6, 9, 11 and 20 MHz only...
Your iPad will only see the 2.4 GHz so that they connect to. If your laptop can see the two strips, they connect to any broadcast signal is the strongest. If you are interested in reading about the difference between 2.4 and 5 GHz, you can read it here.
Can also apply you all the settings you change on the E3200 router your Wireless extender? It is important for computers/devices that are connected to your Extender gets the connection. The Wireless Extender usually extends the 2.4 GHz signal.
Sorry for long post.
Just tell me if this doesn't work, I'll try to think more help
Tags: Linksys Routers
Similar Questions
-
Matter of time for the DHCP lease
I have the WRT160N. Great router, no problems at all.
I have a double NAT: Modem DSL--> WRT160N--> wireless devices
DSL modem is on the bridge and router is configured for PPPoE. Works very well.
in any case, I use the port forwarding for a certain application. I don't use it all the time; Some days I don't use at all. I don't need a DD - WRT firmware. I don't want to even set up a static IP address. When the computer uses the application that requires a port forwarding, if its IP address has changed, it takes like 2 minutes to change the settings in the router config page. Yet, it is a little annoying.
While I don't have to do it all the time, I changed the DHCP lease time, which in the router config page, appears to be called ' Client Lease Time.
It is located at 5769 now, which is like 3 days or more of what I understand. I don't know if it's the 'max' or not...
My is... question can go higher than that? If so, it would be really handy.
I updated 7200 = 5 days.
3 days = 4320.
-
How to create a task that runs once a day, immediately after the opening of session?
Hello, I'm wondering how to create a task using the Task Scheduler that runs once a day, immediately after I have logon.
The reason is I want to use Bing Desktop to change my wallpaper every day. However, I just want to run the first time I start my computer every day, so it will change the wallpaper. By default, it starts whenever I have to logon. It's annoying, because I just want it to start once a day to change the wallpaper. However, using the Task Scheduler, I put only a trigger to start "at the opening of session' or"once a day." If I choose once per day, it runs about 5-10 min after I login, instead of logon immediately after. If I choose the two triggers, then it starts after each session.
Basically, I just want the Task Scheduler to launch the program after the connection the first time I connect to the computer on any given day. How can I do this?
Hello Jeffrey,.
You can refer to the links below and see if that helps.
Create a task
http://TechNet.Microsoft.com/en-us/library/cc720110 (v = WS.10) .aspx
Modify a scheduled task
http://TechNet.Microsoft.com/en-us/library/cc778308 (v = WS.10) .aspx
Change an existing task
http://TechNet.Microsoft.com/en-us/library/cc766442.aspx
Please write back to us for assistance and we will be happy to help you come.
Thank you
-
"Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?
Hi Jack,
This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/ -
Hi, I have the 2014 package which includes lightroom and photoshop. Can I move to 2015 for free? If yes how can I do? My photoshop 2014 disappeared and its saying I have a 30 day trial for the 2015. Thank you for the help
Yes, the upgrade is free. means that it is included in the subscription.
You can install and activate one of these version according to your choice of 6 CS, CC, CC 2014 or 2015 CC
If the CC 2015 looms as of the trial, please refer link below:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
Let me know if you need more assistance.
Also mention if you use Windows or Mac computer?
-
I need to scan my macbook pro for the virus. any medium online Apple?
I need to scan my macbook pro for the virus. any medium online Apple?
Viruses are made for Windows computers. Macs are less vulnerable to viruses. Why do you think your Mac virus?
http://www.reedcorner.NET/MMG/
http://www.thexlab.com/FAQs/malspyware.html
Mac quarantine folder: about the alert "do you want to open it? (file quarantine / known malicious code detection) in OS X - Apple support
-
Editions of Windows upgrade
Hey guys, I have a Windows Vista free disk and I'm building a new pc. I plan Windows 7 Pro, but I want to know if I need to install Vista on it for the purchase of a Windows 7 upgrade edition, or can I use the product key that came with Vista, when you install the updated version?
In order to use the versions of Windows 7 upgrade, you must have a previous qualification license installed (Vista or XP), Windows 7 upgrade must be a compliance check. There is no need to activate it if.
-
The waiting time for the activation of the subscription of creative cloud?
The waiting time for the activation of the subscription of creative cloud?
Hi Evgeny,
You can follow the article: solve common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages and errors in connection with Creative Suite and creative Cloud applications, activation and connection Solutions to resolve activation problems.
Let us know if this solves the problem for you or not.
Thank you
Yann Arora
-
Just changed my account information for payment, but payment results in a week, enough time for the new payment will be held for the new account?
HI Lucas,.
I see that you have tried to change the billing details, but they were not properly updated.
Please get in touch with the customer: -.
-
I downloaded Lightroom 6 thanks to Amazon and never received an email from Adobe with the serial number, I need to finish my license/registration for the product...where/how can I get the serial number?
Hello dakineny,
Please refer to the link given to find your serial number: quickly find your serial number
It will be useful.
Concerning
Bianka Attre
-
Elapsed time for the materialized view vs Master table query
Hello all;
Small confusion about time up for the vs Master materialized view table query
SQL > select count (*), sum (quan_sold), sum (amt_sold) of the sale;
COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
6000000 12000000 720480000
Elapsed time: 00:00:30.54
SQL > create materialized view mv1
Materialized view created.
2 activate the rewrite of the query as
3. select count (*), sum (quan_sold), sum (amt_sold) of the sale;
Elapsed time: 00:00:01.45
SQL > select count (*), sum (quan_sold), sum (amt_sold) of the sale;
COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
6000000 12000000 720480000
Elapsed time: 00:00:00.01
Please see the three cases "Elapsed Time"...
When comparing other cases.
1. my query takes long time (30.54), extraction of data from the sale
2. create a materialized view takes less time (01:45) why?
Source: http://uhesse.com/2009/07/08/brief-introduction-into-materialized-views/>
Small confusion about elapsed time for the materialized view vs Master table querySQL > select count (*), sum (quan_sold), sum (amt_sold) from the sale.
COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
6000000 12000000 720480000
Elapsed time: 00:00:30.54SQL > create materialized view mv1
2 activate the rewrite of the query as
3. select count (*), sum (quan_sold), sum (amt_sold) of the sale;
Materialized view created.
Elapsed time: 00:00:01.45SQL > select count (*), sum (quan_sold), sum (amt_sold) from the sale.
COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
6000000 12000000 720480000
Elapsed time: 00:00:00.01Please see the three cases "Elapsed Time"...
When comparing other cases.
1. my query takes long time (30.54), extraction of data from the sale
2. create a materialized view takes less time (01:45) why?
>
Many queries take less time the second time you run them. After the first performance, there may be many, if not all, lines in the buffer cache. Then the second round will not make any or all e/s physical but will obtain data from the buffer cache.Also, you haven't checked that the MV was even used for the second run.
Drop the MV and make the query several times and means of the time. Then create the MV and do the same thing.
-
Need me a new case number for the license transfer form? I'm the beneficiary of a transfer of license product registration. The person transferring has already completed and returned the transfer of license form. Can I use the same number, or do I need a new number.
You have to get a new number for you because the transferor and the recipient cannot use the same number.
Reference: I talked to an officer of Adobe, and this was the answer they gave me.
-
Method for the VerticalFieldManager sublayout problem
Hello
I need help.
I have a value for money (VerticalFieldManager) that contains several different fields. My goal is to add a small margin of 10px between all areas. The reason is that the fields are very close together and it doesn't look very good.
Here is my sublayout of value for money.
public void sublayout(int w, int h) { super.sublayout(w, h); Field field; //get total number of fields within this manager int numberOfFields = getFieldCount(); for (int i = 0;i < numberOfFields;i++) { field = getField(i); //get the field int y = 0; layoutChild(field, w, field.getHeight()+10); //lay out the field setPositionChild(field,0,y); //set the position for the field y += field.getHeight()+10; } super.setExtent(w,h); }
The result of this seems ok, but when you scroll down it behaves as expected, so somewhere must be my mistake.
I know there is the 6.0 API setMargin method, but I need something that will also help for the old OS and I have no idea how to do it.
Thank you all for the help.
Jiri
For the task that you have a default VerticalFieldManager with on the battlefields setMargin is quite sufficient. Although setMargin is only documented in 6.0, we work like this forever - at least 4.2.1 probably even earlier.
As to why it does not work the way you want it to work: your sublayout must set at least the virtual measure correctly. Now he acts as if USE_ALL_WIDTH | USE_ALL_HEIGHT | NO_VERTICAL_SCROLL | NO_HORIZONTAL_SCROLL all are in force. The first two are "affected" by setExtent (w, h) instead of accumulated height and maximum width; the last two--using only not setVirtualExtent, which defines the size of managers as opposed to visible size (setExtent) scrolling.
Play with sublayout without calling super.sublayout is a tedious task; If you want to see some better examples (but not perfect), take a look at the source code of advances of buttons, fields and managers (especially NegativeMarginVerticalFieldManager).
To jprofitt: getPreferredWidth / getPreferredHeight are totally unnecessary on managers. Framework blackBerry completely ignores these; some fields use their own default dimensions (ButtonField being the most notable example), but it's just as much as those who will go.
Edit: just noticed something else that is totally wrong with your code: using field.getHeight () before laying on the field! Until the field was laid out, its getWidth and getHeight have both return 0. Yet once again, take a look at what NegativeMarginVerticalFieldManager use as parameters for layoutChild.
-
Get the time on the client side
Hello
Please can someone help me.
I have a contract that needs the timestamp on that clientside application.
I had trouble finding a script that allows me to get the clients time.
Is there a way I can convert a time JS in a var CF?
Please can you help with any suggestions?
Thank you.
formpage.cfm
===========
timeFunction = function () {
var currentJSDate = new Date();
var hr = currentJSDate.getHours();
var min = currentJSDate.getMinutes();
document.timeForm.time.value = hr + ":" + min;
}
next_page.cfm
============
The time of the client is#form.time #
-
We have Creative Cloud for businesses.
Our creative cloud for the client company (= users) cannot access the Typekit portfolio plan, only the free fonts.
Best regards
Matti Makijarvi
We had it operating forest offf CC and Typekit user accounts, delete this user of dashboard, creating a new email account for the user, inviting through this e-mail as a new user.
Now, she has access to the Typekit PF regime.
/Matti
Maybe you are looking for
-
Re: Satellite Pro U500-1DK - utility to toggle the touchpad for Windows 7 64-bit
Hello From laptops while with the "Touch Pad on / off Utility" to control the touchpad "start/stop" button located just above the touchpad, I accidentally uninstalled it and can't find it in the list of drivers. I noticed that there is a version of X
-
When my Macbook connect to WIFI my normal PC to the internet cut
First off sorry for my bad English, but as say the title "when my Macbook connect to WIFI my normal PC to cup of the internet. I was playing online games (WoW) on my normal PC I opened my macbook to work with her, and then I saw that I was disconnect
-
When typing the letters often for example the fourth or fifth appears as the second word. When the slider is to remove in the right place, but the wrong letter is deleted. Although said to remember the username to sign in it does not work at any tim
-
why I get buzzing on my headphones
I have windows vista 32 bit and I get the buzz on my headphones, or when I play music. (any music from WMP or Youtube, as well as just randomly get buzzing. I plugged my speaker jack in another outlet and still the same problem. I tried also also put
-
How to print from my z10? Thank you