E4200 1.0.03 slow transfer from usb storage

Similar Questions

• Impossible to disconnect itself from USB storage devices

  Original title: USB storage devices

  Once more I couldn't properly disconnect a USB storage device because Windows tells me that a program is still using the device. There is no reason for any program to access it then why on earth isn't Windows the task/program name so that I can address the issue instead of having to restart my computer? Of the many irritants "characteristic" of Windows, it is one of the most galling.

  Hello

  ·        What is present in the USB key?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you follow the steps mentioned in the article below and check if the problem is resolved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  If there is nothing important in the USB device, I suggest you to format the device and see if the problem still occurs.

  Note: If there is no important data in the USB then, back up data, and then format the USB.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Slow start from SuperTalent Express DUO USB

  Lenovo G560 is my laptop and I see too slow start this USB thumbdrive in contrast to SanDisk Cruzer Micro. SanDisk's USB 2.0 and SuperTalent USB 3.0 compatible. The boot that would normally take 1 minute, here is 30 minutes.

  Legacy USB support is enabled in the BIOS, otherwise boot USB does not work.

  What's not here?

  
  

• Transfer from old PC to new PC

  I am transfer from old PC to new PC's iTunes library.  Transfer songs purchased, but transferred without CD tracks.  I tried export library old PC to the drive, the thumb then import library from USB key, without success.

  I assume that you have followed the procedure trhis:

  How to move your iTunes library to a new computer - Apple Support

  If not too late, I'd recommend your iTunes first consolidation according to:

  Manage and backup your iTunes media library - Apple Support

  If you don't have all your media files (particularly the CD you have imported) cannot be included in your library.

• Portege R500-12 s - problem of recovery (Boot from USB)

  Hello

  I tried several days reinstall this laptop (Toshiba PORTÉGÉ R500-12 s). I reinstall drive, but it has no CD-ROM included, so I'm fighting with booting from the USB port, with my external hard drive. Those that the BIOS loads even boot from USB? Because there is no alternative USB inside the boot priority. I noticed that I can choose from, what I think is alternative of different startup in start up, when I press the F12 key. When I press the F12 key and choose USB, I just pup up to a similar cmd command line.

  Reinstall is the only option because my laptop is super slow, and I have no restore file (CD) on my laptop

  Ultimately is it possible to reinstall windows via USB boot, or do I have to buy an external CD-ROM drive? Which is the last thing I want to do. Advice or assistance on how I'm going to do this?

  Thanks in advance :-)

  I put t know if this is possible, but if you can visit Toshiba service in your city, ask them for help. They have all the external devices and also external optical drive.
  Buy a coffee and ask if they can install just image recovery using your recovery DVDs. I m that they will help you with this.

  By the way: you can not install OS using the recovery saved on the HARD disk image. Laptop can't see it.
  What you need is the optical disk drive.
  Also, try to borrow a somewhere.

• Re: Message from Usb hub root

  Hello

  I'm doing some research for my friend who has a laptop, model No.
  Toshiba Satellite A200 system Uni
  Model PSAF0A-02L0K number

  He recently bought an internet wireless USB

  When it connect through USB ports, he receives a message from USB root hub and teaches him that this product can run faster

  We are unable to source what is the problem and remedy this problem its Internet works very slowly

  Any help would be greatly appreciated

  Looks like its USB 1.1 mode operation.

  Possible reasons could be:

  1) there is an another 1.1 rUSB connected device that is causing the key USB 3 G run slower.
  2) there is a conflict installed USB driver, such as a printer driver or a USB storage device driver, or the driver for the camera.
  (3) the Intel Chipset drivers are incorrect or not installed correctly.

  Is it on all USB ports?

• EA4500 LAN slow transfer speeds

  I have a WD external hard drive connected via USB 3.0 to the Linksys router. I'm trying to transfer a 2 GB file via wifi but taking up to 12 minutes for the transfer. Why slow transfer speeds?

  I'm using 5 GHz Wifi about 3 feet the router. The external drive is a Western Digital MyPassport. The computer I use is a Microsoft Surface Pro 2.

  I've uploaded other files and they take so much time with 2.8 MB/s maximum transfer speeds.

  dadayzee,

  If you disable WMM on the EA4500 you also turn off the N wireless protocol. That will drastically slow down the wireless connection.

• Transfer from one server to another

  I have an old HP ProLiant with ColdFusion 10 Server on it.   The server is provided Government running Windows Server 2003. It is desperately slow, in particular via the VPN to my company.  SysAdmin in the office gave a VM Windows 2008 R2 server for me and I'm trying to transfer from the old server to the new.   It's a development database.   I downloaded and installed Oracle 11 g on the new server, imported from the old database and the code.  Oracle allows you to download and use the software for free if it is a single-user development machine.   I feel that Adobe doesn't do the same thing with CF.   What is the process to transfer the license?   This project is end of life, my client of Government is unwilling to spend money on a new server or a new software.   Any help would be greatly appreciated.

  You can install the free version of ColdFusion developer if it is used only for development purposes.

  -Carl V.

• NFS slow transfer speeds

  Hello world

  My scenario:

  FreeNAS with:

  -a CIFS directory

  -a NFS directory

  ESXi 5.1 with:

  -2 guests

  -machines for windows and linux

  I added the NFS directory as a new data store on both hosts and began to migrate computers 2. Migration speed is so slow: 1 MB/s or even much cheaper, with peaks of 40 MB/s (very rare spikes).

  From a machine windows in my group, I tried to copy a file to the CIFS directory; the speed is ok - about 60 MB/s

  Since a Linux in my group, I tried to copy a file to the NFS directory; very slow transfer - 1, 5 MB/s max

  Like all machines that he share the same virtual NETWORK card, it is clearly a problem with the NFS or something like that.

  Any help on this problem is highly appreciated.

  Thank you

  If you use FreeNAS, you can configure iSCSI instead of NFS.

  The Protocol is very fast as NFS.

• Unable to boot from USB 3.0 E430

  Hello community!

  I recently got a ThinkPad E430, and I love it.  I have a minor problem with the boot.

  As a Linux user, I regularly boot from usb and cd while trying different distributions and whatnot.  However, I discovered that I can't boot from my USB 3.0 ports.  Not only that, but my computer does not start if I have nothing plugged into them.

  I first thought that I had faked my dd command in the transfer of the image, but the usb key works from the 2.0 port. So I thought maybe it was the usb key itself, but this happens with all my usb 2.0 flash drives and 3.0.

  I noticed a recent bios update a few days, but I don't want to go through the trouble, if she does not really bring all the benefits.  Actually looking at the itt changelog says that it only supports to the B430.

  I guess I would really just know if others in the face of this problem.  Thank you!

  My E430 fine boots of USB3.0 ports.

• About to transfer from Windows to Mac. Need tips and tricks regarding the transfer. That ExtHD does not need reformatting?

  Transfer from Windows to Mac. Need advice on the brand and model of HD Ext for compatibility which will not need reformatting? Advice welcome.

  If you want a HD post to be read by windows and Mac OS. The best choice would be the format ExFAT.

• Boot from USB

  Hello.

  I have a Pavilion p6720f desktop computer.  I want to boot from USB.  I just updated the BIOS that had supposedly fixed issues with the USB to boot. But there is no option in the cmos configuration in the for USB BOOT sequence.  The options are HD, CD, DISK, and NETWORK.  Any suggestions?

  OK PROBLEM SOLVED

  Plug the USB pen into a USB port of your PC (even the work of the port on the front)

  Reset

  Press < ESC > during startup to win the "Boot Menu" (or F12 etc. According to your PC)

  The USB pen is now listed (SanDisk in my case)

  Select it

  Press enter

  Linux starts fine

  Tell your wife or girlfriend, that she is no longer dumped

  Enjoy!

• Toshiba NB520 - can't boot from USB

  I NB520, I tried possible ways to boot from usb and it still does not work.
  I need some suggestions.
  Thank you.

  Usually the name of the USB device does not appear in the start menu.
  If you want to run rom flash USB memory key, you need to connect the USB flash first.
  Press the power button, then F12 and select USB.

  But note: USB flash memory stick must be ready for start-up.
  If it was not made "bootable" and then the boot from USB does not work.

• CL10-B-100 satellite - cannot boot from USB Live of Linux

  I just bought a Satellite CL10-B-100 (PSKVEE - 00300CG 6) with only 8.1 Windows preinstalled. I need to boot from a linux live usb - without success now. No MSC instead of UEFI option available in BIOS. Secure boot disabled, USB set as first boot priority option. The latest version of the BIOS, I found online is the same as on the computer - 1.00

  Any suggestions on how to start from USB Linux?

  Good day

  C.

  Hello

  Most modern distributions should be able to start using the UEFI.
  However, you forgot to mention what distro you are using.

  I assume that your pressing F12 at startup to get the start menu, verify that your key is recognized and select to start him?
  Which means that it fails? No not at all, start it begins to start but fall into problems... ?

  Please clarify the situation.
  BR
  Tom

• Can't boot from USB

  Hi all

  I followed the instructions on the site of Ubuntu to create a bootable USB key, but I can't make it work.

  All I get is the boot prompt "boot:" if I press on enter it says "not found kernel".

  Do I have to have the atom chip intel to use this? I've been trying it on my PC (AMD Thunderbird XP3000 +)

  See you soon

  I would say to create a USB bootable from command line. I have personally trust GUI applications. If you want to, you can do it in 1 step, like this:

  * dd bs = 8 M if=path/to/image.img = / dev/SD [x] * + (this command line clears your USB, so backup necessary files first, if necessary). +

  * /dev/ sd [x] * returns the full path of your usb device Let's say + / dev / sdb + and no + / dev / sdb1 +, which is why make sure that you do not have other devices connected to your pc usb storage.

  Also first make sure you have your USB not mounted, before writing the image file to it. The image file can be downloaded from [here | http://releases.ubuntu.com/9.04/ubuntu-9.04-netbook-remix-i386.img].

  Enjoy.