Error 0x8007045D

Similar Questions

• Satellite L550 - 1 8: error 0X8007045D code and code error 24-380136-00000000

  I have a new Toshiba L550 8 1 computer with Windows 7 64 bit.

  The problem is that I can t burn my files on my DVD PIONEER DVD - RW DVRTD09A preinstalled!

  If I right click on the file and choose send to E:DVD - I got the error 0X8007045D drive code.

  If I use the preinstalled Toshiba Disc Creator, I got the error code 380136-24-00000000.

  What s wrong.

  OLE.

  Hello

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  also, try to use high quality like Verbatim and tdk media. Some cd/dvd rom will not burn, weak brand, media.

• Error 0x8007045D when copying files from computer to external hard drive

  I am trying to copy some files from my drive HARD outside., but I get this error (error 0x8007045D: the request could not be performed because of an i/o device error).

  I run windows check disk on my external hard drive, I tried to run windows defrag, but it takes too Lowe and cancel (external HARD disk is 1 TB). I download a software defrag and defragmented my hard drive using fast (the software is O & O Defrag). I tried on another computer and got the same error. Is it a hardware problem. Y at - there any possibility to fix it. Thank you for helping

  Hello Nyfixen,

  1. have you changed the permission for the external hard drive or files you are trying to copy?

  2. you have all important data (files) stored on the external hard drive?

  3. are you able to copy the external hard drive to the computer?

  The Autorun.inf could not be a problem for that. It always seems to be a problem of permission for me. Some hard drives have a jumper on them for write protection. You should check the configuration of jumpers, thank you consult the manual that came with the hard drive for permissions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-know-before-applying-permissions-to-a-file-or-folder

  Format hard drive:

  Read this article for more information on this:

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Filas system restore with error 0x8007045D i/o device

  I'm trying to do system restore in Windows vista on a computer laptop sony vaio. I am getting following error:
  System restore failed due to an unspecified error.
  The request could not be performed because of an i/o device error (0x8007045D)

  He's going to tell me what I/O device is a failure.
  How to work around this problem?

  Any help would be appreciated.

  Original title: I'm trying to do system restore in Windows vista on a computer laptop sony vaio, and the restore fails

  More often this kind of IO errors are related to the hard drive.
  If chkdsk doesn't fix it, try free hard drive Diagnostics here: http://www.carrona.org/hddiag.html

• computer keeps giving me error 0x8007045D and won't let me put anything on it?

  computer guard to give me error 0x8007045D when I try to put something on it can you help me?

  Here is a picture https://picasaweb.google.com/111853381961106196218/USBWontUpload?authuser=0&feat=directlink

  Hello Christian,.

  You try the steps in the post of boumediene?
  http://support.Microsoft.com/kb/952272
  Specifically, it addresses your problem.
  You can also try try troubleshooting in this thread of TechNet:
  http://social.technet.Microsoft.com/forums/en/itprovistaapps/thread/9e5b22f1-8fb3-4d70-8f79-b92c7dc6e840

• When you copy documents stored in a CD Rom, I got the error 0x8007045D

  When you copy documents stored in a CD Rom, I have the error 0x8007045D message: the request could not be performed because of an i/o device error.

  Please, I beg you. What can I do to copy the documents into the CD Rom in PDF files.
  Thank you
  Stanley

  Hi Stanley,

  You can read the following article and check if it helps.

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  Hope this information is useful.

• When I try to save my computer (vista) I get an i/o device error (0x8007045D)

  When I try to back up my computer running Vista, I get an i/o device error (0x8007045D), how can I fix?

  read the last part of my answer:

  Repost for appropriate backup help

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• On Windows Vista 32 bit full backup fails with error 0x8007045d i/o device.

  Original title: 32 bit back up fails i/o device error

  I'm doing a full backup, because I just perchased Office 2010. I am trying to download on my cd player, E: got as far the 3rd cd and it fails

  i/o device error (0x8007045d)

  Help with this error code?

  Hello
   
   
  Try the methods listed in the section below and check if that helps resolve the issue.
   
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• error 0x8007045D to USB Flash Disk

  I have a 8 GB USB key. I want to copy the installer of Windows 7 for my USB to my Windows Vista Home Premium. In the half of the copy, reported an error 0x8007045D (i/o Error). I try Windows 7, reported in too. Why?

  Start safe mode and see if you can copy from there successfully.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If the same problem happens on both computers using different operating systems, it is not likely the computers.  That's what you try to copy or the USB key.  What is the size of the file?  What USB drive formatted and how much space is available?  You can copy other files of the same size without problems or they all fail - try a couple of check.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Western Digital drive external hard error 0x8007045D

  I have a Western Digital 1 TB external hard drive, and I am currently running Windows 7.  When I try to move files on the hard drive I get the error 0x8007045D i/o and it won't let me move or copy the file.  What can I do to fix this?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• When I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hi when I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have found the error code.

  I suggest you refer to the suggestions by Andre Da Costa MVP responded on 27 April 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/cannot-install-Win7-error-0x8007045d/8cce76b4-25c6-4d07-ACB4-0dfa1ac3f4d3?DB=5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Files could not be copied into a WD My Passport External Drive because of an error 0x8007045D i/o device

  I tried to copy files from my hard drive into an external Western Digital My Passport drive. But, as I was watching the progress of the copy of the files, I noticed that only four files have been copied to the external. A large majority of the files could not be saved due to an error 0x8007045D i/o device. I noticed it's the same error I get when I shut down my computer (in this case it is said error of breakpoint or something). Drag / drop files did not work. Still later, my USB key no longer works.  I tried to check my hard disk for errors, but my camera came out clear.

  I use Windows 7 Professional 32 - bit, E5800 Pentium Dual Core and an Asus motherboard.

  How can I get rid of this error because I need to transfer my files specifically in the external hard drive?

  Help, please. I'm not very tech savvy so simple instructions the better.

  Hi @roryheadmav!

  You can try the basic steps in such cases troubleshooting - first try to connect the hard drive to an another USB port of the computer and if possible with another USB cable.

  I hope that you will be able to transfer all the data you have, but in case it does not work, you can also boot into safe mode and try to copy the same and see if you can successfully complete the copy error-free operation. You can follow this article that describes how to enter Safe Mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Hope this helps and let me know how it went.

• Failed to perform recovery of factory setting - error 0x8007045D Code / product key error - "ERROR!" We encountered a problem with the request for approval.

  Original title: product key error

  Hi all...

  I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
  I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
  Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:

  "ERROR!" We encountered a problem with the request for approval.

  What should I do now? Y does it can someone help me?
  Thank you.

  Consider the following text:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  also check:

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• IO error 0x8007045D with Western Digital External Hard Drive in Windows 7

  I have a Western Digital 1 TB external hard drive, and I am currently running Windows 7.  When I try to move files on the hard drive I get the error 0x8007045D i/o and it won't let me move or copy the file.  What can I do to fix this?

  Error 0x8007045d is "ERROR_IO_DEVICE" - "the request could not be performed because of an i/o device error."

  Check the behavior in a clean boot, or insafe mode.  If it persists, you will have a problem with the external hard drive.