E531 with Samsung 1 TB Evo?

Hello

Can I replace with a basic EVO Samsung 1 TB 1 TB HARD drive?

E531 selected

Samsung EVO base 1 TB

Or is it still possible to plugin both of them and do not remove any other components?

Hello.

Yes, you can do both. You can redeem on your current hard drive to Samsung SSD Evo, and you can then put your standard HD in a Caddy Ultrabay HD (available from various sources on the internet), to serve as a data storage.

Here's a f.e.

Generic 2 Sata Hard Drive Caddy for Lenovo Thinkpad Edge E531 E431 Ssd hard drive

Here is how share you your Ultrabay devices:

Optical drive or bezel white removal and installation - ThinkPad Edge E531

See you soon!

Tags: ThinkPad Notebooks

Similar Questions

  • HP Pavilion #E1X77UA #ABL prod: is HP AMD A10-5750 compatible with Samsung SSD 850 Evo

    Hello

    I have HP Pavilion15 Notebook AMD A10 - 5750 M APU with product # E1X77UA # ABL could someone tell me if my cell phone is compatible with 250 GB Samsung SSD 850 EVO since I was going to upgrade. I did some research and could not find anything about compatibility.

    I really appreciate your help.

    Concerning

    Alex

    I took a chance and installed the SSD. It works very well.

    Thank you for your help.

  • ZBook 15u G2: is it possible to upgrade the G2 Zbook 15u from the 500 GB Samsung SSD 850 evo 500 GB SATA HARD disk?

    Turns out that the hard drive that I got this laptop when I bought it is not really meet my needs, and I'm looking to upgrade. I looked around, and the EVO of 850 SSD Samsung 500 GB seems a good choice for what I'm looking for.

    I just wanted to check if my cell phone is compatible with this ssd. My initial assumption is 'yes' but before I drop money I wanted to confirm this. For reference, I went to the start with the 500 GB SATA hard drive, and I'm looking to upgrade the 500 GB Samsung ssd 850 evo.

    I can provide the SN of my laptop for reference, if needed.

    Hello

    The simple answer is Yes you can. You can use a standard SSD 2.5 "to replace the current HARD drive. And the Samsung is a good choice.

    Kind regards.

  • EliteBook 840 G3: Install Windows 7 Ent clean install on Elitebook 840 G3 with Samsung NVMe M.2 SSD

    I want to install installation Windows 7 Ent on an Elitebook 840 G3 with Samsung NVMe M.2 SSD drive.

    Should what drivers I integrate into the installation source (Windows 7 Ent)?

    Someone at - it the procedure?

    Hello:

    Please see that this wire...

    http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/installing-Windows-7-x64-Enterprise-EliteBook-840-G3/m-p/5642120#M442523

  • How can I sync iMessages with Samsung Galaxy phone?

    How can I sync iMessages with Samsung Galaxy phone?

    You do not have. iMessage is a messaging owner of Apple platform.

  • Pavilion dv6 3100: unable to start pavilion dv6 3100 again clone Samsung ssd 850 evo

    Im trying to upgrade the HDD to the SSD.  Tried a Samsung ssd - 850 EVO 500 GB after cloning, using Samsung data migration software.  However, Windows will not start since the new cloned ssd.  I get a black sreen showing, "windows does not have start message and all... and shows--

    File:------Boot\BCD.

    Status: 0x000000f.

    Info: an error occurred while trying to read the boot configuration data. »

    Samsung Wizard is not able to find data on the ssd.  I looked up and gathered a lot of information and did everything I could.  Disk Manager recognizes the device when connected via USB (for cloning).  Device Manager displays the storage as -«IDE...» SATA/AHCI controller... ».   I enabled AHCI in the regedit - the HKEY_LOCAL... Msahci, IastorV, etc.  I also updated all the possible drivers and firmware and BIOS (f29).  Yet once the ssd is connected and placed in the drive Bay, Windows just would not start.

    I'm an amateur, pretendng to be an "expert"!

    Someone please help!

    Ive been away for a few days.  Sorry for this late reply.

    I have treid sfc/scannow - did not work.  Not sure it'll work, I was not ready to move to another

    $50 on Acronis software cloning.  So, in the end, I opted for a clean install of windows7 operating system, using my own system recovery disks that I created previously.

    Every thing looks and works perfectly.  Samsung magician is able to detect the ssd by his real name (and not as ASMT 2115) and also shows that the AHCI is enabled. The time spent was worthwhile.

    Thank you.

  • Universal is HS300 blackBerry Bluetooth headset BlackBerry Smartphones? That or any other bluetooth compatible with Samsung Blackberry?

    The headset Bluetooth BlackBerry HS300 is universal? That or any other bluetooth compatible with Samsung Blackberry?

    must match with her, there could be some advanced features that do not work, but the basics should be good.

    I used a 500 HS on a samsung A 358 (I think it was the model) and it worked fine for calls.

  • blutooth keyboard does not work with Samsung Slate.

    I'm not able to use my blutooth keyboard is more for my samsng slate xe 700.i lost the key number to pair the blutooth devices

    Hello

    1 have there recent changes made on the computer before the show?

    2. What is the number of brand and model of the Bluetooth keyboard, you're trying to pair with Samsung Slate?

    3. what happens when you try to connect the keyboard with Samsung Slate?

    4. If it works much earlier?

    I suggest you to please follow the steps mentioned below and check if it helps.

    Method 1: Open the hardware and devices troubleshooter.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: Connect to Bluetooth and other wireless or network devices.

    http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

    Method 3: Remove and reinstall the device.

    a. click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

    b. Select the device that does not work, then click on remove.

    c. click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), select the device is set up and ready to be found check box, and then click Next.

    d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then click Next.

    Follow the remaining instructions in the wizard.

    • Make sure that the device is on and that the batteries should be replaced.

    ·         Check the status of service Bluetooth and make sure that it is started.

    • Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.
    • Make sure that you have installed the device using the appropriate program. If this isn't the case, reinstall the device.

    For a keyboard or a mouse, if you have installed the Bluetooth wireless technology on your computer, use the Add Bluetooth device Wizard. To do this, follow these steps:

    a. connect a wired keyboard or mouse to your computer.

    b. click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

    c. click Add.

    • The unit may be out of range of your computer, or too close. Try to move closer or a little further away from your computer.

    Hope this information helps you.

  • Cannot play movies with Samsung Led TV To Play? "Unable to initialize the playlist."

    Original title: cannot play movies with Samsung Led TV To Play?

    I played movies and TV shows from my computer directly to my Samsung TV for 5 months with no problems. I would use the menu right click on the file and 'Play To' the device. I have a Samsung LED HD TV UN55C640. Samsung support said they offer only support when Allshare is used. I get the error "Failed to initialize playlist" now, even if the file is valid and windows has the arrangements put in place for streaming. Does anyone else have this problem? What should I do about it?

    Hello

    Were there any changes made on the computer before the show?

    Method 1:

    I suggest for the link and try to run the Troubleshooter:

    Solve the problems of Windows Media Player video and other media or library

    http://support.Microsoft.com/mats/windows_media_player_diagnostic/

    Method 2:

    I suggest you refer to the suggestion given by eddieb dated November 23, 2011in the following thread and check if this can help:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/play-to-function-Windows-Media-Player-failed-to/f2421fc9-36fc-4A3B-bd07-b8bdbbc0d639

    Let us know if it helps.

  • Adobe Capture CC is available for use with Samsung Galaxy S7 and edge S7 phones?

    Hi Adobe community I have so far struggled to get an answer on the following question: is Adobe Capture CC available for use with Samsung Galaxy S7 and edge S7 phones? and I was wondering if there is someone who can help?

    Any assistance is much appreciated.

    Thank you

    Bruce

    Hi Bruce,.

    Yes. I think that these two devices are supported. GooglePlay installation problems?

    Let me know and I can talk to the product team.

    Sue.

  • EliteBook 840 G2: EliteBook 840 G2 Compatible with Samsung 850 EVO gbs 2.5 SATA III SSD internal (MZ-75E500B/AM)

    I am issued an EliteBook 840 G2, with a HARD drive.  I want to upgrade to an SSD.  Most of my colleagues use the:

    Samsung 850 EVO 500 GB 2.5 inch SATA III internal SSD (MZ-75E500B/AM)

    http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_3?ie=UTF8&QID=1...

    Is this compatible with the EliteBook 840 G2?

    Thank you!

    kengel

    Yes it is compatible

    Please read page 16

    http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04560057-2.PDF

  • Replace drive HARD system with Samsung EVO SSD 1 TB of HP ENVY 17 - j005tx laptop computer

    Hi all

    Wanting just a few tips on how to migrate and replace the system drive without having to reinstall everything again.

    The Migration of Samsung tool work?  When I check my HDD in the laptop there 5 partitions...

    The HARD drive, I would like to replace a the following Partitions:

    400 MB (Recover Parition)

    260MO (EFI Partition)

    904 GB (drive c :) - NTFS)

    350 MB (recover Partition)

    25.5 GB (drive D: Recover - NTFS drive)

    According to the Samsung User Guide data Migration tool, he mentions the following:

    http://www.Samsung.com/us/support/owners/product/MZ-7TE1T0BW

    6 recovery OEM partitions, at the plant by computer makers, cannot be replicated. However, if the PC is manufactured by Samsung and SRS (Samsung Recovery Solution) 5 or 6 is installed, the recovery partition is automatically cloned. (Not supported in versions prior to SRS 5)

    How can I migrate all recovery OEM as well as partitions C: and D: partitions?

    Thanks in advance

    Jim

    Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

    If you burn the recovery DVD, you don't need the recovery partition... they hold the same data. I try the clone on the new drive and see if it works. If it isn't then you still have the original drive and nothing has been lost. Reported problems with the migration of Samsung software. Personally, I use Acronis True Image Home for cloning, and it is not.

  • Instructions for the replacement of 1 TB of HDD with Samsung EVO 1 TB SSD in XPS 15

    Can anyone recommend a set of instructions to replace the factory equipped 1 TB HDD with a SSD 1 TB in a XPS 15 (9530, model end 2013)?  I thought it might be a simple case of the SSD HARD drive cloning and exchanging players, but when I did it I got an error message at startup saying that I needed to make a repair - I na not to note the exact error, but he asked for the Windows installation disc.

    I don't really want to do a new install of Windows from scratch, unless absolutely necessary.

    Thanks a lot in anticipation!

    Hi Paulemm,

    You must use the Dell backup utility and restore to prepare a set of recovery disks. Those can then be used to load the operating system on the new drive. This is the best approach.

  • 17-j111sl and Samsung SSD 840 EVO HP

    I just buy a HP Envy series, after discovering that two places are available for the HD box, I was wondering what were the procedures to install a 840 EVO primary HD SSD Samsung (then with the OS and programs launch frequent thereon) and use the HARD drive I gave with the computer as a second HD for storage of static data.
    Thank you for your help in advance.

    The first thing you need is a second disc hard caddy/cable here:

    http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

    http://www.newmodeus.com/shop/index.php?Main_Page=page&ID=39

    Since the product number you give is for a portable computer released in Italy I will assume that you live in Italy. Newmodeus.com is supplied in Italy. I couldn't find this unit on eBay Italy. I know there are European dealers for the products and supports similar 2d for the hard disk of the aftermarket, but prices tend to be not better than buy newmode and pay international shipping.

    The best way to get the software on the original disk SSD is a clone and once you have the hard drive kit 2d, you can make the clone entirely inside the laptop. Put the SSD in the second span to start the clone and then swap the drives.

    For cloning, there are a lot of programs out there. I like to use Acronis True Image Home 2014. @erico has also published a guide to cloning here:

    http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/how-to-upgrade-your-notebook-to-a-SATA-2-5-quot-SSD/TD-p/4563352/page/2

    Depending on the size of the SSD you buy, you will not be able to use the recovery DVD or player is Recovery Manager for the thumb. So, you can skip this part of the thread.

    If you have any other questions, let us know.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Problems printing with Samsung SCX-4600

    When I try to print from r.0 Beta 12 on my Samsung SCX-4600 printer I get very long impressions with plenty of space between each character. The result is not readable. Any suggestions? Thank you.

    You are welcome. Please click the button of resolved next to the answer that solved your issue.

Maybe you are looking for