Replace drive HARD system with Samsung EVO SSD 1 TB of HP ENVY 17 - j005tx laptop computer

Similar Questions

• Laptop HP 15 (r063tu): would replace drive HARD regular with SSD boost speed & performance significantly on my HP 15 laptop?

  Hello

  Regular HGST (Hitachi) hard drive failed on my HP 15 laptop and I chose to replace it with a spare Seagate Momentus 500 GB HDD (because of the emergency). I read in some other posts on this forum that SSDs increase startup speed and general performance much more conventional hard drives. In addition, seems SSD uses less power and generates less heat, which is optimal for laptop computers. Although SSDS are still quite expensive compared to regular hard drives (a regular 500 Gb portable HDD costs about Rs. 3500, or about $50), all in an SSD with a capacity of 240 GB Samsung / available on Amazon.in Kingston costs about Rs. 5000 (about $70). Thus, a half of the capacity of a normal HARD drive SSD hard drive costs still much more

  Would consider to replace my current HARD drive with an SSD if it's worth the investment (I intend to use this laptop for more than two years).

  Also, please confirm if my model supports SSDS, as he has probably that one Bay to hold an SSD or a normal HARD drive. Would be useful you can offer a good/model mark of SSDS as well. Thank you very much.

  See you soon!

  Riou

  Riou-lyer

  I support the opinion of Hüffer about SSDS and laptops.

  I replaced the spinner in my laptop HP 2011 with an SSD and it's like having a new machine.  It starts instantly and runs a lot faster, more I don't have to worry about the rotation drive going bad.

  An SSD is the best investment to improve the performance of your laptop.

  Good luck

• Replace drive hard ze4900 with disk 5400 RPM?

  I am trying to replace the HARD drive on a ze4904US Pavilion Notebook, Phoenix BIOS F.15...  The original drive is a 40 GB 4200 RPM ATA drive.  I found a 5400 RPM 40 GB ATA HDD, rider that he is a slave, installed, but it is not editing as C:.  This laptop does support the 5400 RPM drives?  Should he be attached as master or slave?

  I can boot from the CD of the OS, which displays the C:\ > and complains that the path is bad.  Try to install Windows XP immediately fails with an IO error.

  If I start the recovery console, WFP, I can see the partition (\device\harddisk0\partition1), but it is not a drive letter assigned.

  If I drop in the BIOS, run the HARD drive test, it displays 'Diagnostics not supported' and 'Device No. IDE'

  The drive 5400 RPM came a Win Vista laptop and was initially cavalier as master.  If I leave it set as master boot, a CD of SystemSuite, he gripes 2-4 e/s, (ignored) errors, takes about 10 minutes to pass the time-outs of the IO error, but finally sees the old partition on Win Vista.  So I know that the equipment is in place OK.  Trying to do a trivial co-operation (volume set name) fails.

  I would like to reformat the drive and start with a file system clean, but format C:/FS: NTFS, fails with "drive not valid or not drive."

  I think I can build a bootable CD to update to e.16, the HP BIOS later.  That would support the drive 5400 RPM?

  Larry
  
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

  Fixed! Found a Hitachi Travelstar 60 GB HDD, 7200 RPM, IDE interface, was attached to CSEL, inserted in the HP Pavilion ze4904us, put under tension and it worked like a charm.  The car was seen by the BIOS/advanced/HDD/Diag and it test very well, at least through quick check of phase 1, then I released on bail.  Under BIOS/Palestinian territories occupied? / BootOrder the drive is detected correctly (displays the correct model ID).  Installed WinXP and on my way.

  I used the HP WinXP SP2 original installation CD.  Does not all of the HW (WLAN, VGA), video drivers.  Subsequently found most of these on the HP/Support/downloads page.  Lack yet the program Program Files/utility/One-Touch to change the definition of the buttons easy One-Touch access at the top of the keyboard, but the work of bindings by default OK.

• Replace drive HARD Y500 with SSD - 16 GB mSATA SSD disk cache is removed?

  Hello

  I have a Y500 IdeaPad and recently bought a 240 GB SSD 2.5 ".

  I want to replace the 1 to 2.5 "with the SSD 2.5 HARD drive" for best performance.

  Now that I have a drive high speed there is no advantage in order to maintain the 16 GB mSATA SSD disk cache?

  I need to remove the cache of 16 GB mSATA SSD drive after the instalation of the 240GB SSD 2.5 "?

  Thank you.

  Now that I have a drive high speed there is no advantage in order to maintain the 16 GB mSATA SSD disk cache?

  Answer: IMO, cache ssd is no longer since you already have an equal or faster ssd drive.

  I need to remove the cache of 16 GB mSATA SSD drive after the instalation of the 240GB SSD 2.5 "?

  Answer: You can deleted or you can format and use it as a data disc.

• Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

  Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

  If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

  Think I'll get a laptop samsung...

  Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

• have replaced my HARD original with an SSD drive, but now my laptop does not recognize HP support assistant?

  Dear Forum,

  I replaced my original HARD with a SSD drive, but now HP support assistant recognizes my phone? The program runs but updates always fail and when I look at general specifications the serial number, product name, number of product, microprocessors, system memory, motherboard, bios system, drive hard (s), and optical drive (s) are all empty. Interestingly, it recognizes the device to display (s) as being mobile intel (R) HD graphics and current resolution of 1366 x 768 and refresh rate 60.

  My laptop is an Australian model HP DV4 3029tx, which is an intel i5 14 "(2ème génération) with AMD graphics 6750" I replaced the original 640 GB hd with a 180 GB ocz vertex 2 using acronis to clone the drive.

  I would be grateful is anyone know how to get hp support assistant to recognize my computer.

  Thank you very much

  Hello
  Try this: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/HP-Support-Assistant-not-working-on-Win7/m-p/736511#M34734
  I think that cloning might be the question because the original configuration has been changed. Simple uninstall and reinstall again could possibly solve the problem as well...

• Cannot install Windows on Bootcamp after replacing 3 TB FusionDrive with 1 TB SSD

  3 merger to drive has been replaced by 1 TB SSD drive. When reinstalling OS X I see that the 128 GB drive of Fusion is still available as a hard disk, which prevents me to install OS X or Windows (Bootcamp) on the SSD.

  I tried a few ways to install:

  1. OSX on SSD (recovery Internet Mode, delete all partitions and repartitioning, SSD)
     Installation fails when you try to install
  2. OSX on FusionDrive (128 GB), Bootcamp on SSD
     OSX installs fine, Bootcamp does not work. First time (10 Windows) I got an error message i/o failure and winload.exe, second time (8.1 Windows) a back message with 'failed to load the operating system, press CTRL + ALT + DELETE. That part a few times.
  3. OSX on FusionDrive (128 GB), Bootcamp on same drive
     Working, but limited to 128 GB for OSX and Bootcamp
  4. Make the logical Volume (fusiondrive) with 128 GB and 1 TB
     OSX works, but can not give more than 64 GB to my Bootcamp. Bootcamp to 64 GB ok.
  5. OSX on FusionDrive (128 GB), Bootcamp on FusionDrive - to SSD with Winclone
     8.1 clean Windows Installer, Sysprep. Everything looks ok in Winclone. When you try to reboot I get a message similar to "failed to load the operating system

  I would like to at least 800 GB on my Bootcamp. Does anyone know how to make this work?

  iMac late 2012, 1 TB Samsung EVO has replaced the 3 TB drive (installed to the authorized service partner Mac).

  After building the Fusion drive in step 4,

  1. the 128 GB drive was first in the volume of your CS?

  2 Let us try and correctly create the CS and see if we can make it work.

• replace drive hard kaput?

  When my computer was unable to reboot and chkdsk and the following disk repair utility would not work, I paid to have the laptop looked at by a pro. It turns out that the HARD drive has failed. So the question is: can I replace the drive hard when all I have to work with are the recovery disks that I made when the computer is new? (Door NV57H) The OEM of Windows 7 will be on these discs, which allows installation pretty simple hard drive and recovery? Can I go with a SSD? As a smart enough DYIer with some knowledge of computers, but limited reparations experience can handle such a task?

  SSD become cheaper these days for sure

  They may fail, as any player, as you've seen personally.

  System images are the best way to retrieve install lost hdd or ssd, but they must be on other devices / hdd before they are viable

  But Yes if the recovery cd creation took place all you have to do is install a new drive and the boot CD #1

  Follow the prompts.

• Replacement 1 TB HD with 128 GB SSD

  It is even possible to replace the hard drive of 1 TB with a 128 GB SSD? I tried it but when I try to run the recovery disk (so that I can install the original OS), it says "the size of your hard drive is not supported for this process. Please use a hard drive at least 931 GB in size. »

  I tried to "shrink" the original HD, but it only allows me to go down to 450 GB or more.

  My only option installs a new copy of Windows on this subject?

  I managed to solve this problem using Acronis...

• S1620CDS: replace drive HARD 4 GB by a 20 GB

  Hi all

  How to replace the HARD drive? I heard that it's located below the keyboard. HOW can I remove the keyboard, then?
  Thank you year hlp.

  [email protected]

  Hello

  You are right. The HARD drive is replaced under the keyboard.

  If you want to remove the keyboard to on this way:
  1 remove the cover of the band. The status indicator panel aims to snap
  in place. Please do not use excessive force to remove or replace. You can't lose this part of both sides.
  2. when the cover of the band is removed, remove the four screws now the keyboard in place
  3 lift the keyboard

  If I remember just the HARD drive fixed with two screws.

  Good luck!

• Replace drive HARD w / expansion, made HP Recovery, but only a third of the new HARD drive got in the format

  Last week, I got a (installed at the factory of 1.5 TB) HARD disk failure on my HPE Pavilion. I bought a new 3 TB drive, installed, did a back HP recovery to factory settings (Win 7 using disks that I had made when the system was again 4.5 years ago) and returns to a good operating system. While everything seems OK, when I check computer it tells me there are 2 partitions on the new disk, C: being 734GB and being 11.5 GB D:.

  What should I do to format this drive to give me 2/3 of the space that I'm missing?

  The PC is a HP Pavilion Elite HPE-180 t, product #BN515AV #ABA under Win 7 Pro 64. 1.5 TB SATA HDD that failed was the drive installed original HP, where the recovery DVDs were made in 2010.

  The new drive is a Seagate STBD3000100 3TO SATA HARD drive which records only to the 801 GB format recovery.

  Thanks for responding.

  ..... Further research revealed that indeed, I maybe don't have to install a drive greater than 2.2 to.

  http://knowledge.Seagate.com/articles/en_US/FAQ/218615en?language=en_US

  Bad luck. Guess I'll just go buy a new 2 TB drive.

  ... Final note: went down to BestBuy (again) and bought and installed a WD 2 TB (model WDBH2D00020HNC-NSPS) drive. That formatted at full capacity with HP Restore, and am now reinstalling all bloody software that a computer builds up more than 4.5 years.

• replace drive hard dv6

  I need to replace the hard drive of my 3225 dv6 dx, but the hp spare part is too expensive (hp # $ 603676-001-219). Y at - it another option that works with this model, but cost much less? (preferably under $100) I would appreciate any suggestions you may offer. If possible, a few options would be great, in the case where one or more is not in stock. Thank you!

  Happy that power will help you

  Thank you

  PLEASE CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM *.

• replace drive hard macbook pro 2008

  Where could I find an instructable how to replace the hard drive in my macbook pro 13 "mid-2008 (unibody)? Or should I bring to an authorized Apple service center here in Malaysia?

  Here is a guide of ifixit.com. I'm not sure of the exact model of your computer, but this site is a good starting point. They are deep in their step by step guides.

  https://www.iFixit.com/Guide/MacBook+unibody+model+A1342+hard+drive+replacement/ 1670

• How do I synce my family photo'sfile on my drive hard exeternal with wihe even name on a usb flashdisc

  How do I synce my family photo'sfile on my hard drive of exeternal with a file of the same name on a usb flashdisc

  Hi AllanGrace,

  -You try to use any sync software to synchronize the file?

  Trying to transfer the file manually using the copy / paste operation.

  You can also check:

  Step-by-step guide to migrating files and settings

• Replace drive hard hp pavilion dm3 after failure of hard drive test.

  All,

  I have a HP Pavilion Dm3. Windows 8 Beta. My error messages included: drive hard Test failed. Hard disk 1 (303) fast. Hard drive 1 full (395). Most recent upload has itunes. From what I see I need to replace my hard drive.

  My question is this; is there a manual or a guide on how to, 1. physically, replace the hard drive and 2. record information that may exist on my hard drive crashed? Thank you in advance for your help!

  Hello:

  There are many models of dm3.

  I pulled a repair of the dm3-2000 series. I hope that this layout is the same.

  Read Chapter 4 of the procedure on the removal and replacement of the hard disk. Do not throw the old hard drive.

  You will need to the caddy, the connector and screw to transfer to the new.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01893277/c01893277.PDF

  Before you remove the hard drive, you can see if you can copy your files on a USB portable hard drive by downloading, burn it to a CD (using the ISO burning method) and make a the Kapersky rescue CD bootable CD. This will allow you to see the folders on your C:\ drive using the method of the graphical interface of the program execution.

  Then you can copy and paste your files on your portable hard drive.

  If the rescue CD can not see your hard drive, there's probably nothing you can do anything to the drive for recovery.

  http://support.Kaspersky.com/FAQ/?QID=208282173

  Paul