EA 4.1 change of definitionfile FK Index Association
Hello
I found that the data for FKIndexAssociation XML file has been changed. The containerWithKeyObject and the localFKIndex changed a part of the Chile to an attribute.
Does have an impact on the old models used with the new version of DM?
What happens in a mixed environment versions 4.0 and 4.1 of DM working on the same drawings?
Joop
Hi Joop,
The containerWithKeyObject and the localFKIndex changed a part of the Chile to an attribute.
4.1 DM can store all the single-file model - can be changed in the design properties. Given that this file could very large, we have changed the analysis of XML and we had to change the presentation of these properties because of the dependencies.
Does have an impact on the old models used with the new version of DM?
No, even drawings of version 3 can be used.
What happens in a mixed environment versions 4.0 and 4.1 of DM working on the same drawings?
DM 4.0 can open design so 'model in many cases' persistence in DM 4.1 mode is used. It is not recommended to modify the designs with DM 4.0 because all the new properties introduced in DM 4.1 persistence will be lost.
If not for DM itself it does not matter if the property is offered in the form of attribute or child element ('Model in many files' mode). We use child elements for less conflict in the management of versions and better readability.
Philippe
Tags: Database
Similar Questions
-
You cannot change the E-mail address associated with Apple ID
I followed all the instructions to change the e-mail address associated with my Apple ID, including the signature of all THE browsers and devices that have previously been signed to my Apple accounts (icloud, itunes, etc.). I also deleted my ID apple from my iPhone / iPad. The Apple ID page 'manage' I select "edit", "Change my e-mail address", and then I type in my new address, select 'continue' and screen dial just keeps turning and gets stuck. I tried to use a new address "icloud.com", but that did not work. Then I tried to use a new address "outlook.com", and that did not work; the dial at the same screen keeps turning but going nowhere. Very frustrating. Anyone have any idea why this is happening?
I'm not sure what you are trying to do but you can not change the address to iCloud and you are never offered any opportunity to do so.
-
I need to change the VAT TAV number associated with my account, but he knows not way to do
I need to change the VAT TAV number associated with my account, but he knows not way to achieve.
I just redirected to a general ' contact' page, but nothing to solve the problem.
H I'mmiguel,
Please contact our customer service team, follow the link below:
Sign in using your Adobe ID & click on "still need help? Contact us button.
Kind regards
Nicos
-
Creating an Index associated with a constraint
I'm a beginner,
I got confused, can someone explain what follows...
_ Creating an Index associated with a constraint
Oracle database applies a UNIQUE key or a constraint integrity PRIMARY KEY on a table by creating a unique index on the unique key or primary key. This index is created automatically by the database when the constraint is enabled. No action is required by you when you run the CREATE TABLE or ALTER TABLE statement to create the index, but you can optionally specify an ESCALATION using clause to exercise control over his creation. This includes them when a constraint is defined and enabled, and when a constraint defined but disabled is selected.
To enable a constraint UNIQUE or PRIMARY KEY, thus creating an index associated, the owner of the table must have a quota for the tablespace intended to hold the index or the UNLIMITED TABLESPACE system privilege. The index related to a constraint always takes the name of the constraint, unless you optionally specify otherwise.Yes, you are right. As above Sybrand and docs say that we can use the INDEX USING something like this:
CREATE TABLE is)
A1 INT PRIMARY KEY to the AID of INDEX (create index on a (a1) AI));Just read this link, it has all the answers.
http://docs.Oracle.com/CD/B28359_01/server.111/b28310/indexes003.htm
Concerning
Girish Sharma -
I'm on Windows 10 with 16 GB of ram and Photoshop CS6. I have also updated my video driver from the manufacturer and you have run all windows updates.
You have installed all updates of Photoshop CS6?
-
Index associative arrays in varchar2
Hi all
It seems that associative arrays are indexes by varchar2
automatically sorted by index value.
Please run this test:
Now, the questions are:declare TYPE TEST_ARRAY IS TABLE OF VARCHAR2(10) INDEX BY VARCHAR2(10); aTest TEST_ARRAY; cIndex VARCHAR2(10); begin -- Test here aTest('X') := 'X'; aTest('A') := 'A'; aTest('C') := 'C'; aTest('Z') := 'Z'; aTest('C') := 'C'; aTest('B') := 'B'; aTest('AB') := 'AB'; aTest('12') := '12'; cIndex := aTest.FIRST; while cIndex IS NOT NULL LOOP dbms_output.put_line('aTest('||cIndex||')='||aTest(cIndex)); cIndex := aTest.NEXT( cIndex ); END LOOP; END;
1. are you aware of the documentation of Oracle that describe the behavior above?
2. are you aware of no example where associative arrays index in varchar2
is not sorted by its index? (Finally, except changing the NLS_SORT setting)
3. is it safe to use this feature of "sort"?
Thank you
Thomas1. are you aware of the documentation of Oracle that describe the behavior above?
" Associative arrays: ' indexes are stored in the sort order, not order of creation '."
-
Change the e-mail address associated with my iCloud
All my stuff is backed up on my iCloud under [email protected], but I need the update [email protected] as I'm leaving olddomain.com and will not have access to this much longer email. Is it possible to just change the email to a new gmail address so it is associated with is more than my former employer?
Email address Apple ID
-
I want to change the e-mail address associated with my login to iCloud
My current connection is xxxxxx.aol.com. I want to get everything on AOL that I had problems with him after more than 20 years with them. I don't want these problems bother iCloud.
See this - change your Apple - Apple Support ID
-
How to change BlackBerry Smartphones Blackberry ID associated with my phone
Hello
How can I change the Blackberry ID associated with my phone?
When I try to change it in the options it says invalid password even though I can connect with the new ID from the web browser.
Please notify.
Thank you
Samer
Hello and welcome to the community!
Here's a knockout who deals with this situation:
- KB26694 How to change the BlackBerry ID on a BlackBerry smartphone or BlackBerry PlayBook Tablet
The resolution is drastic, I agree... but it is what it is.
Good luck and let us know!
-
Why can't I change wmp 12 file type associations
Windows 7 64, wmp12: I don't then deselect any type of file currently associated with wmp 12 (52 / 53). I try to click on the boxes and nothing happens. Select box everything is equally insensitive. What's happening via the function of programs by default in windows - I have not even a tab file types in the Media Player options box. What the *? I tried in standard user accounts and my admin Thx for any info.
Hey Pan,
Same thing here. It may seem to be that it designed this way (grrr!) such as unassociation is not possible. You can use "Associate any type of file or Protocol with a program" instead.Associate a type of file or Protocol with a program: this option allows you to refine the default programs based on Protocol or file type. For example, you can have all the .jpg image files open using a specific program, and .bmp image files open using a different program. -
Why my images don't change not when it is associated with?
I am working on a site in Dreamweaver CS6 and have encountered a problem. When I link images located in the site to the pages of the site my moving images to the left about 20 pixels or more. The text (or legend) underneath the image remains intact. Just the images move. Does anyone have knowledge on how to fix this? Thanks in advance for your help.
Thanks for the link.
Line 32 of your style sheet has a value that will move your images linked by 14px.
Redefine your navigation rule for target only links/images, not all related objects
-
Change of the Windows experience index
Hi there, my Pc has pre installed Windows 7 installed. Now, one day when I play VICE CITY. My computer is same trolling even if I play in this situation of delay, it will stop. Because of that I got my PC Factory Condition but still the game is late and now side processor pc has changed in windows Experience Index. I don't change any parts of my pc, I don't understand why games are late. A few times, my side of processor decreases in windows experience and sometimes to normal side index. Can someone explain me what is the cause of this problem? However, there is no 100% malware. Only the processor rating evolving performance remaining all index are constant. It evolves 6.0 5.0 or 4.5 and sometimes go back to 6.0. My processor is Intel I3 - 2330M which has no turbo boost option
Hi root,
The problem is specific to this game?
'Delay' is a phenomenon in the computer game that appears when there is a delay between entering commands on a keyboard or a controller and seeing that the command has acted on the screen. For example, in "Grand Theft Auto: Vice City" for the PC, shift may occur when you press the button 'Next', but your character is not actually start moving until a few moments later.
Make sure to install the latest version of the game, or sometimes, there might be a patch released by the game manufacturer.
The offset can be from a setting that is not compatible with your computer. For example, open the "Screen Resolution" menu and set the screen resolution of the game for a lower than setting that it is currently set to. Check if that helps.
Thank you.
-
Can I change degree on index PK on enable versioned table
Hello everyone,
I tried to use the OWM change parallelism on PK index on table enabled version, but nothing happens. Everything was a success, but the parallelism is always the same, as it was before. I tried to do the same thing on the table that is not enabled version and it's success.
Does anyone know I can do under OWM or it is another feature of oracle undocumented?
Thank youHello
It is a support operation using beginDDL/commitDDL. I noticed that a SR was asked on this subject. If it is yours, then continue with this process for a solution to your problem. Otherwise, an example that shows exactly what you are doing would be useful.
Ben
-
Is it possible to change data in a cell 'mirror' + RESEARCH questions?
Hi all!
The idea is the following:
I have an accounting base numbers document implemented that automates the process of encoding of individual invoices, clients, with their price + coupons service announcements and summarizes the accounting.
Information boards is implemented for individual receipts, or a nicer individual record to customer research with the research
That's where I met 3 barriers:
(1) I was wondering if it was possible for a field in one datasheet to other mirrored? :
-L' idea is NOT to have a simple '= A$ $1 ' or ' = LOOKUP (REF., range, content) not allowing editing. "
-It is a cell on A page SHARE the SAME content in another cell in the spreadsheet b: change in the sheet A or B would automatically change the field of mirror in the other sheet. It would be a very neatly to create a form for the encoding of the data! Somehow, I have my doubts about what is a feature of the numbers, but I was wondering if anyone knew a workaround? In other words: a field at several places.
(2) instead of a SEARCH function that the problem of data modified in the original table (example: a Bills (past) sheet being affected by changes made to a price list): is there an equivalent of 'paste values' to that?
(3) I have a 'General' Journal (and a table) to display financial data from my "bills", but the info is basically just a table with the "' values sought my table"bills ". It works very well with the "auto-fill" when I manually adjust the size of the table, as the invoice automatically filled when increasing the size of the table. I was wondering if there was a) an easier way to do what I know and b) a way for the "accounting" array to dynamically adjust its size according to the number of invoices (same result as one)).
ANY help is greatly appreciated!
Christian
Hi Christian,
Brief answers to three questions:
- # Research reports are always a sense - entered into a data cell can be collected by a formula in a cell of the second, but the data entered into the second cell will not create a change in the first cell. A cell can contain a "fixed" value, which can be changed manually in this cell, or it may contain a formula that combines the data of one or more other cells and eventually made some calculations before displaying the result.
A cell that contains a formula of edition replaces the formula with the data entered. - The formulas are always "live". If the result of the formula is based on data specific to a cell, then a change in the data (e.g. a price) in this cell will change the result calculated by the formula and displayed in the cell. The result can be 'fixed' (made to the remain the same, not "fixed") using values of dough (renamed paste formula results), but this can be done by using a formula.
- Size (number of rows) of the table 'accounting' (or ' table on the "journal") can not be adjusted automatically depending on the size (number of rows) of the table "bills". In the "accounts" table formulas are automatically added as every cell in the column of the first row header not the above one row being added contains the same formula. Replacing any copy of this formula with the calculated results by that copy breaks the chain and the formula prevents fill automatically new lines added at the end of the table.
Some general considerations:
All data should be entered only once.
Data entry must be separated from the calculation to avoid the accidental destruction of the formulas.
Data 'Immutable' (eg. current prices, data on clients) may be imposed and looked up from lookup tables.
This has the potential of growth to a large set of data. Numbers are known to slow down considerably with the large data sets (and 'big' happens quite quickly).
With regard to price changes:
Use the INDEX and MATCH the prices of research allowed the transaction date to control the INDEX column will return a price. Each price change (or set of price changes) is entered in a new column, marked with the data hence these prices are in effect. Price unchanged compared to the previous date of change should also be included in the new column.
Kind regards
Barry
- # Research reports are always a sense - entered into a data cell can be collected by a formula in a cell of the second, but the data entered into the second cell will not create a change in the first cell. A cell can contain a "fixed" value, which can be changed manually in this cell, or it may contain a formula that combines the data of one or more other cells and eventually made some calculations before displaying the result.
-
DUT numbering (indexation from 1 instead of 0)
Hello
I would be like sockets of test in batch to be indexed starting at 1 instead of 0 so this UUT show up as UUT1, UUT2, UUT3, etc., in the report. Is this possible in TS4.0? I saw the ad in http://forums.ni.com/ni/board/message?board.id=330&message.id=10193&query.id=75159#M10193 , but we use LabView, CVI not.
Thank you very much
Chris
Modify the report, simply change "Add Test Socket Index" step in the sequence of the appropriate reprotgen_ AddReportHeader?. SEQ and assuming that you do not use the option of generating report DLL. If you want to change the display of the interface Operteur, then I think that the only way is to use CVI or rewrite the interface with LabVIEW.
Maybe you are looking for
-
Firefox silently upgraded from 7 to 8. I can't seem to get it to re - initialize.I had installed Fox 1.700016 elastic extension from http://munday.ws/2011/08/elasticfox-for-firefox-7-beta-and-up/
-
Satellite A500-1GL: recovery reached Office Reboot again and again - solved
I did a restore on my Satellite A500-1GL using F8 to recovery on the HARD drive. However after the computer goes through the implementation of Windows 7 for the first time, from desktop it immediately disconnects and restarts. This process of setting
-
Toshiba Virual Sound is not compatible with Vista
I have a toshiba sound preinstalled in my equium A110-276... you know, that produce the audio output HD and SRS surround sound... When I installed vista it no longer works... If the sound is now just a normal sound not as good as toshiba virtual soun
-
"Debugger users" and "Vincent" in Windows XP account administrators
I have an account called "Vincent", which is a member of the administrators and "debugger users. When I tried to remove it by using a local administrator account I get the message "" the user that machinename\user does not able be deleted." When I
-
Answer: File Explorer is invisible when opened
I've had my computer for about 3 weeks, and up to about 3-4 days there, when I try to open the files or when I click on my file Explorer icon on my taskbar, it is invisible. When I open the Task Manager, it does not show that it is running, but if I