EA4500 + ADSL router: networking noob question

Similar Questions

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't.

  Configure the connection without my Windows XP CD?

  
  

  I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't. Is there something that I can get online? What should I do?

  Hi Humphrey2,

  I suggest you arrange for an installation CD of Windows XP which may be necessary to copy the files to configure the network connection.

  You can follow these links and check if the problem persists:

  In Windows network connection issues

  How to troubleshoot a network home in Windows XP?

  
  Reference: Overview of the Network Setup Wizard

  Hope the helps of information.

• I need help to set up the linksys adsl router

  Hello world!

  I have LINKSYS WIRELESS - N HOME ADSL2 + MODEM ROUTER (wag120n) and I connect to the internet via the cable that I took my friend who already SPEEDTOCH ADSL ROUTER, I bought the d-link wireless card and I install it in one of my PC
  what I need is to set up my linksys wireless router for my two PCs, on via the wireless and another an ethernet cable, how can I do?

  thanks4all

  Follow this link to configure the router.

• Noob question: Playbooks all have the same performance?

  I know... noob question. I am to complete my first game PlayBook and before I submit the app store I wanted to make sure that hardware performance will be the same on all the playbook or will it be something because of the performance issues on a per-device basis? I hope that this will be similar to a console where you can expect stable performance. THX.

  All devices (currently) work the same in the same conditions.

  That does not mean, however, that you can treat it as a console.  A console runs only a game and nothing else (in general).

  The PlayBook can run multiple applications, and among other things, a user can 'Behavior of the Application' setting configuration Mode Showcase, default, or standby, what determines if your application runs or stops when it is idle.  If they are in window mode, they may have other things at the same time.

  To a first approximation, however, "even in the world" is probably correct, for now.  Don't forget there will be different tablets in the future, with specification different but compatible with your app... not quite like a console there where many games is basically orphaned (or requires a port) when a new generation comes out.

• Noob question: autonomous AIR .bar files?

  Sorry for the noob question, yet to learn these things from the air. When we create a .bar file, it is the only file position, does it include the runtime air, flash, etc, etc, or is it always require an accumulation of air / flash runtimes on the device? THX.

  The .bar file does not include the time of execution because the runtime is already preinstalled on the Playbook.

  Air is really integrated into the PlayBook so you don see the difference between a native app or an Air application.

• PIX and ADSL router.

  I have, in a site, a PIX 515 connected to a C827H (an ADSL router as PPPoE). This router provides access to the Net. In another site, I have another PIX (a 506) and another router C827H which gave access to the Net. Both sites have access to the net without problems. But when I have what it takes to establish a VPN (Ipsec) tunnel between the two sites, across the Net, I can t make the connection. The ADSL router has their public IP is negotiated with the provider. In my lab, I simulate this two connections put two PIX (a 520 and a 506) back to back with a crossover cable. I used the same configuration. The thing worked. But in my two sites that does not work. Why?

  I see, in this case. I suggest that change you the name of the ACL defined in crypto card, try not to use the same ACL you used for nat0, it poses problems sometimes.

  Try and see if it works for you.

  -Jimmy

• NooB question: Cup titles and a schedule of transfer

  Let's say I have tons of tracks.  In the Middle, I find I want to firm up a few seconds of footage.  I can cut, or delete the clip, but I still have to select all the following clips and make sure they move upward.  There must be a smarter way of removing a few seconds of footage and moving upward?

  Sorry for the noob question, I searched on google and didn't know what to look for.  I am open for more information that can help me to tighten my research thus.  See you soon.

  The answer will probably depend on more factors:

  Are there in your Timeline, Clips above the area of the Clip you want to Trim?

  What you want to happen to those?

  Are you only concerned to "strengthen" the Clips on the same video track where you cut, or Clips on other tracks video too?

  It is likely that the tool Edit Ripple, or Rt-click and Ripple delete, will do what you want, but who can count on the other Clips on other tracks, and video that you need.

  Good luck and please let us know a little more.

  Hunt

• D.I. box noob question

  Hi all

  Sorry for the noob question, but I need something clear up if possible. I was about to buy a box for injection and then had a query on them, and if I actually could benefit in this scenario...

  
  Fig 1. is how I currently record.

  Fig 2. is how I would do it with di direct box

  

  My question is... in this configuration, the d.i. box would make a difference to the signal? or he would only make a difference if I was going to live guitar to box, the sound card?

  Thank you for all your help.

  In my opinion you have basically three alternatives for the recording of the guitar:

  1. get an amp excellent sound, recording with a microphone, or more, in a room of good survey.

  Challenges: you'll probably need a studio proper, or at least no neighbours, because it could become LOUD. It takes time and experience of mike a good amp and even microphones expensive (several). Result depends on the acoustics of the room more than you think.

  Another way here, is to get/build an isolation area around your amp, which will be a kind of micro studio for it, allowing you to play hard and with a good tone, but in a more controlled environment. Many advantages for this make. Unfortunately, the expense can also be 'pro' - but I don't know there are DIY solutions.

  2. record of the amp 'dry' via either its line (send FX will also) or use a ' soaking power allowing you to put the amp (some sounds so much better AMPS), but with a low volume in the room. You can connect the device of soaking directly, or give the speaker the "tame" signal and mike the amp without disturbing the neighbors that it now. Good power soaks don't come cheap (?). Dry recording, for example by not using mike, often sounds like this: dry. It depends on your style of music, but an electric guitar should probably be considered an acoustic instrument. Instead of a diaphragm in wood, it has a speaker. The sound, often, we want to achieve is an amp of good sounding in a good room, which is an acoustic sound. You simply cannot get to an exit row or direct to a soaking of output power (not president). He needs treatment.

  3 use a program like GuitarRig, Amplitube etc. No installation required, regardless of the size of the room and acoustic sound (except that the acoustics of the room always will affect listening!) or mike. The software simulates the amps, effects and even mic configurations; added the "airplane" that you will not get a direct connection. Once again, according to your style. If I were Bill Frisell or Jim Hall, i.e. anyone with an as most of their music very "naked" guitar sound, I probably does (but these guys have access to the great engineers too...), but in a pop idom / mixed rock with other instruments and certainly to do demos, that's actually what I would recommend. Especially for us space challenged who have neighbors and an infinite time either. No, you will not look like 'all the world'; It's garbage in French - garbage out as always (many are disappointed by the present, but some are happy, it is always the case)

  All you need is a sound card with an instrument of entry. If you have a * good * sound card already who is not entered instrument, you can consider a DI box. Otherwise I'd say it's redundant.

• Adding multiple Airport Express to a router/network Apple no?

  Hi all

  You are looking for assistance.

  Until yesterday, I had an Internet ADSL connection and home network WiFi connection that consisted of a base no routing modem, connected to a time Capsule. The extended wireless network had 3 Airport Express connected.

  My ISP (TPG in Australia) past my ADSL to the new NBN yesterday and have sent me a new HUAWEI Modem/wireless router. That's why I need is no longer my Time Capsule for routing.

  My question is now; Can I connect my A-Express to the router not Apple to create a large network similar to what I had before? I did a little reading and apparently not!

  Thanks in advance.

  Can I connect my A-Express to the router not Apple to create a large network similar to what I had before?

  Sorry, but no.  Feature of "extend" Apple owns. The Express devices can only wireless "extend" the signal from another router from Apple.

  You can still use the time Capsule to provide a network... wireless signal and the expresses may 'extend '.

  You could use the wireless of the Huawei product for "guest", or disable wireless on the device if you do not need two wireless networks.

• How counfigur tp-link router wireless? I have the Wireless ADSL router. I want to add 1 wireless router in this system. What can I do? Please, I beg you. suggest me. ___thank

  1. to configure the router wireless in a network?
  2. I want to set router adsl on a network. How can I do?

  1. to configure the router wireless in a network?
  2. I want to set router adsl on a network. How can I do?

• Static route / network Configuration?

  I have a cable modem that connects via Ethernet (eth0) of a configuration for NAT and Firewall Linux box.  Another card (eth1) connects to a switch for my cable network (192.168.1.1/24).  I added a third adapter (eth2 - 192.168.2.1/24) which is connected to a M20 (192.168.2.2).  The server DHCP M20 has been implemented to serve the 192.168.3.1/24 network.

  Is there a configuration more simple than that?

  Problems reported with the current configuration:

  (1) I think the M20 NAT function must be disabled because the Linux machine is.  However, disable NAT causes machines on 192.168.3 bad connection to the internet.

  (2) I want the machines wirelessly on 192.168.3 to see shared windows on 192.168.1 and vice versa.  Currently they do not see each other.  If I remove M20 and plug a PC eth2 and set as 192.168.2.2, this machine can see actions on 192.168.1 and vice versa.  I think a static route must be set on the M20 so that he knows what to do with traffic to 192.168.1.  However, I don't properly because he always tells me I have an invalid route when I try to enter.

  (3) is there one another device other than on the M20 motorway which would better suit my needs (adding a wireless to my private/internal network segment)?

  Kind regards

  Case No.

  OK, I just saw the previous thread on this question pop up on the first page,

  Valet parking can be defined as an access point only?

  I'll try the posted instructions here.

• Connection with a switch EZXS55W or a second router WRT54G to my router network WTR300N home?

  I have a home office in my basement with my computer connected to a lan of my WRT300N router that is set up on the first floor and networking with three additional computers to the floor as well. I want to add 2 additional computers in my basement and wireless is not a good set upward because the signal strength is very low. I have great reception on the floor and even on the second floor where my children are connected from their rooms. My question is: I have an older WRT54G Router I use is more and want to know if I can connect it to my WRT300N using the lan line ran down in the basement which is connected to one of the Ethernet ports of the WRT300N? If so, how the connection and set up the second router? Also, I can use Ethernet cables to connect my three computers to the second router or what I need to use the wireless of the second router? I was looking at the switch EZXS55W at the Wal-Mart local and thought that was my answer, but after a search through all the answers of the basis of knowledge here, I'm confused on the approach to take and which one would be the best game for me. Here, any help would be great!

  With the EZX you extended your wired LAN. You can still use the WRT54G to add another point for other cable ports and wireless access. Just do these 4 steps as stated in my previous post.

  You can connect the WRT54G the WRT300N or the EZX. Basically, it's all the same. You don't have to turn off the switch before you connect a device.

  If you want to use the additional wireless WRT54G, you can try to set up a roaming wireless network. Implement the WRT with identical settings as on the WRT300N wireless, i.e. identical SSID and wireless security the same (preferably WPA2) personal with a good password. Do not turn off the SSID broadcast on either WRT. Only the allocation of channels should be different at a time to avoid any interference. Now the devices should be able to move from one access point to another without losing the network connection.

  However, if you perform this configuration test carefully. I don't know how it works if you have a N Router and a G. If this does not work, use different SSID on both. You can then choose which SSID to connect to on the client.

• Windows Vista Home Basic 'local only' access via ADSL router, broudband

  Hello

  I've set up a new router broadband wireless ADSL to connect to my broadband PostOffice.com existing Standard.

  The router is a Belkin F7D1401uk Surf N150 model.

  It is facing up and running and I can use other machines to connect to the internet through it. A netbook running Windos XP SP3 and a mobile phone (Nokia X 6), but my laptop main running Windows Viast Home Basic SP2 (32 bit) do not have wireless internet access.

  It is a Fujitsu Siemens Amilo Li 2727 laptop. If I connect to the new Belkin router using an ethernet cable, I can connect to the internet. But when I unplug the ethernet cable and turn on the WiFi I see a connection to the modem Belkin Wireless, but on an 'unidentified network' and with 'local access' only.

  Here is a copy of what I get when I run "ipconfig/all" at the command prompt:

  Windows IP configuration

  Name of the host...: Clare-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Atheros AR5007EG Wireless Network adapt
  Physical address.... : 00-16-44-E8-64-2C
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::4d89:e63c:ba6c:1c4d % 11 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: April 3, 2011 15:59:55
  End of the lease...: May 11, 2147 00:41:44
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 268441156
  DHCPv6 DUID customer...: 00-01-00-01-13-A7-2B-7F-00-1F-16-00-9E-C4
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address.... : 00-1F-16-00-9E-C4
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  So, it looks to me that use wireless I have an IP address and the default gateway and DNS servers are correct.
  But I do not understand why I "local access" only.

  Can anyone suggest what I can do to get my laptop connected wireless to the internet please?

  Kind regards
  David

  Hello Ttard,

  Thanks for your post.  One of the solutions, I saw about this problem is to go to your system manufacturer's Web site and download / install the latest driver for your computer wireless.

  This thread is very long, but has some great troubleshooting in steps.

  Please let us know if this information helps with your problem.

  See you soon

• ADSL ROUTER

  Hello

  IM, Proliant for a CRM Server installation. 15 customers will be access to content on the web at the request of products. clients will not access the content at the same time.

  My question is, I have a modem Huawei HG530 and I would like to replace it with a slightly more robust with 1 ADSL interface.

  Router wich or SRP sill would you recommend me?

  Hi Ricardo, the PRS model you need depends on your regional DSL. Depending on whether you have a schedule A, B, Mr., I would recommend that you check the comparison of the goods to determine which router, you will need for your region.

  http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6790/gatecont/ps10500/data_sheet_c78-550705.html

  -Tom