EA4500 + N TiVo - how TiVo tape 5g?
I just upgraded to the EA4500 for the added range, etc. I would like to let TiVo have the side 5g and use the side 2.4 g for everything else. How can I know what TiVo group uses?
I tried setting TiVo place manually, but it does not accept the password/key for the band of 5g. I gave up and used the "push button" method, but I have the impression that he puts on the band of 2.4 g.
I have two SSID different and two different passwords.
Any help/suggestions would be appreciated... a lot!
C
It was long and I have more but I remember correctly, it is that if you do not use the automatic WPS method to define, it you have to connect it to a computer for configuration. What the TiVo is it is a wired interface. There is no way to set up the TiVo. Once he tries to connect a computer to your router you can then move it to the TiVo. You may need to power cycle the TiVo, after it has been connected. One of the lights indicates what band it is activated by its color.
There are a lot of instructions here.
http://support.TiVo.com/app/answers/detail/A_ID/1590
Tags: Linksys Routers
Similar Questions
-
U31-70 Alps touchpad - how to allow two-finger tap "right-click"?
Hello
I have a problem with the Alps touchpad in the U31. I would like to bring up the contextual (right click menu) with a tap two fingers on the touchpad, but everything simply, nothing happens. In the options 2 finger Alps touchpad click fires and the small sample animation clearly shows how a tap two fingers works as a right click.
I'm pritty sure this is a software / driver issue, but I have installed v8.201.1611.250 and no new version seems to be available.
Anyone else had this problem or knows how to solve?
Hey spidey101,
Thanks for your help! Remove and reinstall the drivers of the ALPS do not solve my problem, so I kept on looking and fortunately found a solution in this post:
https://forums.Lenovo.com/T5/Lenovo-P-Y-and-Z-series/Y50-70-Alps-touchpad-add-2-and...
In the registry settings, I changed the following parameters:
"HKEY_CURRENT_USER > software > Alps > Apoint > Guesture.
"2TapSupport" = dword:00000003
"Enable2Tap" = DWORD: 00000001
'2TapFunc' = dword:0000000 d
"2TapSetting" = dword:000000ff
"2TapShow" = dword:00000009!!! And I had to make the same changes in "HKEY_LOCAL_MACHINE > software > Alps > Apoint > Guesture ' in the work of tap to '2 fingers as a right-click' on my U31-70.
Best regards
-
DUPLICATE TAPE BACKUP DATABASE
HelloI wonder if someone can help me. My environment is Linux, and the Oracle version is 11.2.0.3.0. I'm trying to clone a database from one server to another by using a tape backup (no database). I implemented the appropriate TNS entries, so that the two systems can communicate. I created a password file and a PFILE in the destination server, and I started upward (NOMOUNT) of the instance.
Initially, I tried the operation from the destination server; I received the error message such as: RMAN-06100: no channel to restore a backup or a copy of the data file 11
Suspecting that the destination server have not may not be the level of appropriate access to the MLL, I tried the operation from the source server.
But I am getting: RMAN-06101: no channel to restore a backup or a copy of the control file
Source database: MM1
(Cloned) database of destination: MBA
RMAN script
------------------
target connection.
connection Assistant sys/***@MBARun {}
allocate channel 'dev_01' type 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
allocate channel 'dev_02' type 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
allocate channel 'dev_03' type 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
allocate channel 'dev_04' type 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
Disc CHANNEL AUXILIARY ALLOCATE c1 TYPE of AIRCRAFT;
up to the time "to_date('14-aug-2013:16:20','dd-mon-YYYY:hh24:mi')";
DUPLICATE THE MBA NOFILENAMECHECK TARGET DATABASE;
output channel c1;
release the string "dev_01";
release the string "dev_02";
release the string "dev_03";
release the string "dev_04";
}Journal:
------
Recovery Manager: release 11.2.0.3.0 - Production Fri Aug 15 11:27:24 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
RMAN >
RMAN >
connected to target database: MM1 (DBID = 1713891644)RMAN >
connected to the auxiliary database: MBA (unassembled)RMAN >
RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > > > > > > 18 17 16 15 14 13 >
using the control file of the target instead of recovery catalog database
allocated channel: dev_01
channel dev_01: SID = 188 device type = SBT_TAPE
channel dev_01: A.06.20/PHSS_42081/PHSS_42082/DPSOL_00448/DPLNX_ Data Protectorallocated channel: dev_02
channel dev_02: SID = 17 device type = SBT_TAPE
channel dev_02: A.06.20/PHSS_42081/PHSS_42082/DPSOL_00448/DPLNX_ Data Protectorallocated channel: dev_03
channel dev_03: SID = 191 device type = SBT_TAPE
channel dev_03: A.06.20/PHSS_42081/PHSS_42082/DPSOL_00448/DPLNX_ Data Protectorallocated channel: dev_04
channel dev_04: SID = 31 device type = SBT_TAPE
channel dev_04: A.06.20/PHSS_42081/PHSS_42082/DPSOL_00448/DPLNX_ Data Protectorallocated channel: c1
channel c1: SID = 161 type device = DISKexecuting command: SET until clause
From duplicate Db 15 August 13
content of Script memory:
{
clone of SQL "create spfile from memory";
}
execution of Script memorySQL statement: create spfile memory
content of Script memory:
{
clone to stop immediately;
startup nomount clone;
}
execution of Script memoryInstance Oracle to close
connected to the auxiliary database (not started)
Oracle instance startedTotal System Global Area 6631034880 bytes
Bytes of size 2240744 fixed
2315259672 variable size bytes
Buffers data 4294967296 bytes
Redo buffers 18567168 bytes
allocated channel: c1
channel c1: SID = 11 type of device = DISKcontent of Script memory:
{
until the SNA 208772810.
clone of SQL 'alter system set = db_name
"MM1" comment =
' Modified by RMAN duplicate "scope = spfile;
clone of SQL 'alter system set db_unique_name =
"MBA" comment =
' Modified by RMAN duplicate "scope = spfile;
clone to stop immediately;
Start clone force nomount
Restore controlfile primary clone;
change the clone database mount;
}
execution of Script memoryexecuting command: SET until clause
SQL statement: change the system db_name set = comment "MM1" = "modified by RMAN duplicate" scope = spfile
SQL statement: alter system set db_unique_name = comment "MBA" = "modified by RMAN duplicate" scope = spfile
Instance Oracle to close
Oracle instance started
Total System Global Area 6631034880 bytes
Bytes of size 2240744 fixed
2315259672 variable size bytes
Buffers data 4294967296 bytes
Redo buffers 18567168 bytes
allocated channel: c1
channel c1: SID = 160 type device = DISKFrom restoration to August 15, 13
output channel: dev_01
output channel: dev_02
output channel: dev_03
output channel: dev_04
output channel: c1
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 15/08/2013 11:28:44
RMAN-05501: abandonment of duplicate target database
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06101: no channel to restore a backup or a copy of the control fileRMAN >
RMAN >Complete recovery manager.
I finally understood what was wrong with my approach. I had missed a bit in the literature: the definition of AUXILIARY channel should be the same as that used for the backup. Of course, RMAN normally does you not clear in its mystical error messages.
In addition, according to the document, it's a good idea to create a SPFILE in the auxiliary instance. I did it.
Therefore, in my case, the same channels as those used for backups on tape. So is the syntax I used successfully:
target connection.
connection Assistant sys/***@MBARun {}
allocate channel 'dev_01' type 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
allocate channel 'dev_02' type 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
allocate channel 'dev_03' type 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
allocate channel 'dev_04' type 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE 'sbt_tape '.
parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
up to the time "to_date('15-aug-2013:12:30:46','dd-mon-YYYY:hh24:mi:ss')";
DUPLICATE THE MBA NOFILENAMECHECK TARGET DATABASE;
output aux1 channel;
release the string "dev_01";
release the string "dev_02";
release the string "dev_03";
release the string "dev_04";
}To improve the programming of schedules, the next time I can increase the number of auxiliary channels. I need to know how many tape drives, I have at my disposal.
-
How to type the symbol of the square in sql?
Hello everyone
Could someone tell how to tap the square symbol (raise to) in SQL. IE, how to type the formula of cumulative interest in sql:
P * (1 + r/4) increase to 4
Thank you
Gerardinterest is devoted to the:
compound_interest = P (1 + i) n
M is the final amount, including principal.
P is the principal amount.
i is the interest rate per year.
n is the number of years invested.for example
-----
If compound interest is 5% then 5/100 = 0.05
P = $ 100
n = 5 yearsSELECT 100 * POWER ( (1 + 0.05), 5) compound_interest FROM DUAL;
output: 127.62815625
See you soon,.
Manik -
K3 black Note screen - K50a40_S114_150618_ROW
Yesterday I download something in b/w download can I double tap on the screen to watch whats the download status but screen won't wake up and then I click on the lock button nothing happen, then I permanently by clicking the back screen for 1 second minimum lock button. the screen goes black and I see in the background NPH works normally. I can remove the battery and put it after a few minutes, but I am again facing the problem. After many trials finally unlock the phn and after a few minutes later his work fine help me but I can do if the problem happens again. Pls tell me but is this problem and how can I fix.
Note from the admin; Phone & ROM added to the subjects.
I found the same problem when downloading content via torrent mu app pro. I updated my phone to the latest ROM update
I found the workaround for this problem:
1. some how double tap to reactivate the option is disabled in the function option once you change the Launcher by default.
2. If you reset your Launcher by default as a pitcher from Lenovo, you will need to re-enable this feature.
3 then after that the screen turns off during the download I just made double to wake up my screen, but somehow it is not answered then I realized above question. I have re-enabled this feature.
4 but if I patiently locking button for momentary time... then he wakes up your screen & download status shows.Hope that this info will be useful.
-
Hello. I was wondering how to tap the symbol on the keyboard hastag. It is located above the number 3, but does not work with the SHIFT or ALT. I'm stuck. Any help much appreciated. Thank you.
I managed to find myself the answer. It is open up microsoft word and then Insert tab and then symbols. I found the pretty easy hastag symbol. I've since updated to internet explorer 9. Thanks again.
-
I have not found an entry in the bios n500. the splash of opening tells me to press the button lenovo, but that seems to have little effect. of course he doesn't like how I tap it because she continues to start...
the only time where I think I got to the page of lenovo was when I kept it interupting the boot by turning off the computer, trying to get the button lenovo to work... it went in a safe mode of page type and conducted an audit on the hard drive...
I looked through what Manuel I can find... maybe I'm missing it just... I would like to have a looksee... y at - it another entry? Perhaps a combination of keys? What happened to the DELETE key or the f10?
Thank you!
never mind, I found it... installs the suction cup at the other end of the F keys!
I've always used computers laptop compaq... This is my first of this brand... we bought 2 and so far, they did great...
-
Hey, whats up?
Well, I need to erase all the cause of hardrive a virus and now I can not change the use of the Fn and the keys F1 to F12
I want to use the F1 - F12 normally without the Fn keys, but how I tap it, something happens, then... What's the asosiated of program or bios driver for that I need to use F1 - F12 without the Fn key
Sorry if I do not so clearly, Im from Bolivia in South America and I don't know English
Thanks, but I already have the resolve download Ultranav and other drivers for the keyboard to the pag oficial of Lenovo
Thank you and good work on your part, keep this interest
-
I am about to install ESX on a HP DL380 4i. I have 6 300 GB hard drives. I won't attach to any SAN.
I'm trying to figure out how to tap my hard drives to maximize space with fault tolerance. I try to avoid the loss of 2 300 GB drives for my install ESX (RAID 0) and the rest of the disks for storage.
I thought about using a USB device, but this system will be used by other people, so I wanted something more permanent and also feared that the device USB would be lost so a little do not want to engage in this way.
Looking for ideas on how I have to configure my hard drives.
EnriquePHX wrote:
I'm trying to figure out how to tap my hard drives to maximize space with fault tolerance. I try to avoid the loss of 2 300 GB drives for my install ESX (RAID 0) and the rest of the disks for storage.
Why lose readers at all?
6 x 300 GB in a RAID5 configuration = 1500GO.
Install ESXi, or install it on a USB key.
And certainly do not use RAID 0.
-
How can I connect my Apple TV recently updated to a TiVo box?
MY old Apple TV connected to the TIVO via optical cable and optical switch 3-way. The latest version of the apple TV isn't an optical cable facilities. How can I now connect to my TiVo machine.
the new ATV4 has no optical port. Your choice is HDMI connection to your TV directly (rather than TiVo) or buy a splitter HDMI/optical...
-
my TiVo mandatory Port 8081 be opened, how can I do this?
How to open port 8081 to my TiVo can work on my SBS with ISA server network.
Hi Dick,
You use the Windows Firewall?If so, take a look at the following Microsoft article and follow the instructions:I hope this helps. -
TIVO requires certain ports to be unblocked. So I try to add the ports requiring TIVO. But when you try to add the default Type of firewall IPv6 Port Mapping ports and I can't change the value of the IPv4 Port Mapping because the input field is grayed out and no is not accessible. With Port IPv6 mapping I enter values in all areas except for the IPv6 address because I do not know what value to enter. I think the button 'save' ' is not available to hit because the IPv6 address field is empty or not valid. Note: my router Mode is ' Off (Bridge Mode). Same questions if my router DHCP Mode.
I changed my router Mode DHCP and NAT, then on the Type of firewall on the default page add ports, IPv4 Port Mapping and I could add ports but with this setting, I couldn't connect to internet in my Airport Extreme: my status remains orange light flashing.
I use Comcast and my Airport Extreme is connected to my Comcast router using ethernet.
I use my Airport Extreme as a router (wired and WIRELESS) and as a backup device.
My TIVO is connected to my Airport Extreme using ethernet.
How can I add the Ports requiring TIVO.
Golden in the networking rule. ....... Never try to configure port mapping when you have two devices on the same network the two acting as a router.
Unfortunately, this is exactly what you're trying to do.
You have three options:
(1) run the Comcast router "as what" and configure the port on the device of Comcast mapping... .the airPort Extreme must be configured in Bridge Mode when you do this.
(2) lance to the AirPort Extreme router Mode of DHCP and NAT and configure the ports on the airport map... the peripheral Comcast must be configured to operate as a simple modem in Bridge Mode when you do this.
(3) lance to the AirPort Extreme router Mode of DHCP and NAT and configure the ports on the airport map... swap Comcast modem/router you have now for a simple modem (it will have only a single Ethernet port).
In other words, either the Comcast is defined as the router and AirPort Extreme is in Bridge Mode... or... the AiPort Extreme is configured as a router and Comcast must be configured in Bridge Mode.
If you choose Option 1, then we can not help you on a matter of Comcast router. In bridged Mode, the AirPort Extreme requires no configuration.
If you choose Option 2 or Option 3, then we the following port values that the Tivo device needs:
Public or UDP ports
Public TCP
UDP private
Private TCP
In addition, you need to find the MAC address for the TIVO. It is a long code that looks something like this, for example:
A1: B2: C3: D4: E5: F6
A link to the Tivo instructions for port mapping would also be very useful. I have done this with a TIVO in the past, but is for some years.
If all goes well, an expert of TIVO will post to lend a hand.
-
static IP address assignment to TiVo on BEFSR41 router
Hello
I'm trying to put in place a couple of TiVo cable already on my home network so I can 'see' on my Mac using the TiVo Express of Toast Titanium function and copy the TiVo on my Mac programs. TiVo technical support suggested that the problem is that my Mac IP address is 198.162.1.100 (assigned automatically) and for some reason some of my TiVo is on 198.162.0.2 et.0.3. They suggested that I have manually assign a static IP address for the for put them in 'sync' with my Mac address - that is to say, something in the range 198.152.1.xxx of TiVo.
I was able to assign a static IP address of 198.162.1.109 to the head of the TiVo (and my Mac is still not see it), but I received an error message when I tried to assign 198.162.1.110 to the other TiVo. Technical support suggested I check with you on assignment of the IP address via the router. Can you tell me if this is possible and if so, how?
Thank you!
If the TiVo is Gets an IP 192.168.0.2 or similar when using dynamic/DHCP/Auto IP addresses means the TiVo is connected to a different router or get an IP address from another DHCP server.
1. Please check your wiring. Your modem should connect to the internet, the port of the BEF everything is connected to the BEF. If the modem has additional LAN ports, a modem/router combo device. Do not use additional ports on the modem/router combo.
2. If wiring is OK, as previously indicated another reason for a 192.168.0.2 automatic address IP sharing a computer inside your network that has been configured for an internet connection. With internet connection sharing you can share an internet connection through this computer. To do this, the computer will assign 192.168.0. * IP addresses on its side LAN. Please check your computers if there is one that has internet connection sharing enabled.
-
by using software of Tivo desktop 2.7 in Windows Vista Home Premium
Lately, I've been with Tivo desktop 2.7 compatibility problems and Gallop of windows media. After you have installed the office 2.7 which is the latest version of the Tivo software, I find that I can't look at my media center tv. I found that an AX codec is not compatible with media center. The codec is a codec of Tivo. I don't have the chance to write the name of the codec. Anyone out there has any adice or suggestions on how to handle this? jim0
Hello
This looks like a common problem with Tivo desktop 2.7 and Media center.
If you have Windows Vista Ultimate or home premium versions, or if you use TiVo Desktop Plus, it is possible that either the MPEG-2 codec isn't properly record or that another codec has been installed and Windows Media Player is giving preference to the other codec.
Check the codec selected for playback: select 'Properties' from the 'File' menu after clicking once on the video file and note the value for "codec" video With the key, it should be "Main Concept MPEG - 2 Video Decoder".
Here are extracts that were taken from section of the TiVo Support under category of reading problems. Take a look at who they listed troubleshooting steps.
http://support.tivo.com/app/answers/detail/a_id/196 .
The Tivo forum has its users posting the same problem with media center application. This problem mainly because of the Media Center services are disabled. Link below includes the steps that you can try to solve your problem.
http://forums.TiVo.com/PE/action/forums/displaythread?rootPostID=10424257
Please go through the above steps and let us know if this helps.
Kind regards
Anthony. -
How to create individual tracks of a tape to make a digital file
I intend to download tapes to the application Garageband to a player via a USB cable. When I downloaded and got in Garageband, I have to change to create individual files to send to iTunes. I'm hoping to do in order to be able to play individual tracks of the videotapes when I sync with an iPod. I'm wishing that I can play them in the iPod even I could play a prerecorded CD by scrolling. I don't want the all digital tape to play without interruption.
Since I was 250 tapes I want to scan, it would be nice if it was easy to do the editing instead of cut to each track and sending the iTunes Song individually one at a time only more and more.
Can you help me understand how to do this? Any suggestions would be welcome.
If you need to split a recording into separate songs which will be sent to the iTunes audio, you can use the cycle area in GarageBand to mark individual songs.
Drag the yellow bar to cycle through the record, which must be registered as a separate song, then use the command "share > song to iTunes" to add this song as a separate to the album track.
Repeat this for all the songs on the album.
This help page describes the use of the cycle area: http://help.apple.com/garageband/mac/10.1/#/gbndac973a7d
Maybe you are looking for
-
Pavilion dv 6700: upgrade software from Vista to 7
The HD on this laptop has a partition recovery for Windows Vista (about 12 GB) disc. If I upgrade the operating system Vista to Win 7 OS should I delete this partition or create another cover in the same partition as now for Win 7? I'm not sure that
-
It runs pretending to install: each time restarting the computer up to date appears again; I look at all, I can find no cure for installation is complete on the web. all others so far seem to fill. KB 2530548 tried to install several times. shows tha
-
o sound, other problems, drivers w/yelow exclamation points
Videos slow race, stop. IE stops, said cause is driver Realtek. I shut down the computer and start again is correct (for IE). Manager pilots tried and experienced a lot of screwy things - so I deleted the driver manager. The audit said pilots do not
-
How to connect wireless the WRT54GS
I have a router WRT54GS I want install Wireless with my Windows XP desktop that has only an installed wireless adapter. There is no ethernet on the pc port. I have reviewed the Stickys are and read that FAQ, but still did not find a response stating
-
"Installer of Modules of Windows stopped working"
The pop-up with this message in her box keeps popping - up to... The problem is, I went to the services and checked on this subject... In services, it was launched and running... How can I stop this pop-up box to break on me when I'm online? I have'n