EA6500 request router password on first installation

Similar Questions

• EA6500 router password stop working when on the Internet

  My question is quite simple but really difficult to understand on a logical point of view.

  I have a new EA6500 (v1), I hung on the network and set it up using the router password by default is 'admin '. I have configured the PPPOE connection to my internet and then, as soon as it is connected to the internet, I am not able to connect to 192.168.1.1 more because it says that my router password is not valid. If I just disconnect the WAN cable and refresh it, the router password works now.

  I tried to change it and it continues to operate only if the router is not connected to the internet. When it is connected to the internet, I click on the "local access" mode, but get the same error "router invalid password." If I log in using my account Smart Wi - Fi, I get the error "error_gets_network" which disappears after about 1 sec and then it is up to the login page, or sometimes, it will simply ask the router password which will not work in any case.

  I have the latest firmware, but I reinstalled it always manually without success. I tried a few resets hard too but the problem is still there and it's really annoying because I can't go to the router configuration without cable router WAN. And I can't link my smart Wifi account since obviously the router password is not recognized and more if I'm on the internet.

  Any ideas?

  I tried with the latest version of Google Chrome (cleared cache and everything, and since it does not work when the router is not connected to the internet, I don't think it's a browser problem). Interface does not work with the latest version of IE (even in compatibility mode, maintaining the interface tells me to download the latest version of Internet Explorer, it's really ironic).

  Try Opera or FF? If IE 8, 9, 10 or 11, test value and mode of compatibility again.
  Disable any security browser addons such as No Script and Ad-Block or set them to allow all Pages when it is connected to the router.
  Clear all caches browser.
  Don't forget to log on to the Admin account on the router.
  Try disabling these features in Chrome:
  Top right corner, few bars options > settings > settings (left) > see the advanced settings.
  Uncheck the box for these:
  Use a web service to help solve the navigational errors
  Use a service forecast for complete searches and URLS typed in the address bar
  Predict the actions of the network to improve the performance of page loading
  Activate the protection from phishing and malware

• My iPad is not able to connect to my wi - fi network. I made an update to my router on my first laptop and I can't get an internet connecction on my iPad.

  My iPad is not able to connect to my wi - fi network.  I made an update to my router on my first laptop and I can't get an internet connecction on my iPad.  I'm invited to a password, but don't know what it is.  I'm looking for the password?

  Assuming that you have a wireless router at home that you need to know the wireless network SSID, encryption type (IE. WPA2 or WPA for example) and the encryption key and password / password.

  Many routers appear encryption key wireless to plain text. Copy in the iPad. Check the router site users manual or support to help manufacturers to enter the config pages.

  If the router does not have the key, you can also see in the properties Win 7 Wireless for your home network. Open network and sharing Center and click on Manage wireless networks left. Right click on your wireless network and select Properties. Click theSecurity tab and checkShow characters . Provide the administrator password to see the key.

  http://sdrv.Ms/Spor94

  More help from Apple...

  http://www.Apple.com/support/iPad/Assistant/WiFi/

  Apple iPad WiFi support forums...

  https://discussions.Apple.com/community/iPad/using_ipad?view=discussions#/?tagSet=1188

• OfficeJet Pro 8610: First installation Officejet pro 8610/storage

  Hello

  I turned on the printer to set up as a printer of replacement for when the usual distribution. I was hoping that I wouldn't need to install the ink cartridges, so I plugged into the power supply. Now, he tells me that I can not disable the printer because it can damage it. But if I don't printhead for a long period (over 6 months) the ink can dry and must eventually be replaced and which has a very high cost. So is it safe to keep the printer stored for more than 6 months with the installed ink cartridges and the ink will not obstruct Chief? Or can I turn the printer off without completing the first installation of the printer?

  Thank you

  Hello @nmc1987,

  It is a great place to get help! I read your post and you want to know if you need complete installation, even if you are not using the printer for 6 months. I want to help you solve this problem.

  My personal recommendation would be to close to the bottom of the printer, and when you are ready to use the printer, then insert the cartridges.

  If you went ahead and set up the printer, you can store the cartridges and print heads by following this document: storage open cartridges and printheads.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• How to find a router password?

  How can I re - find my Belkin router password. It is not on it and does not connect my new kindle.  My laptop is still connected.

  It's in the user's guide, if you have not then you might start here:

  http://en-us-support.Belkin.com/

• Pirate computer now to request a password

  Compaq model: Presario CQ5300F, Windows 7

  A customer has backed up to the telephone conversation with the strong Indian accent, supposedly from Microsoft, telling him that his computer has problems and released control of his computer for hackers.

  It doesn't have the recovery disks.

  When Windows starts, a window of old-fashion - looks like XP or 98 or 95 - opens requesting a password.

  You use Ubuntu, I was able to back up its files.

  The recovery partition is present, I do not know in what form.

  The customer is willing to let the computer reset to factory settings.

  When I press F11 after turning on the computer, instead of bring the Recovery Manager, she prays for the discs, that I did not.

  Go to the "restoring at last known Configuration" goes back to the same page by pressing F11

  The BIOS seems functional and password is not defined.

  Suggestions for

  1. Access to the Recovery Manager

  2. Using Ubuntu find the routine that asks for the password and disable

  3. Or?

     Note: I will seek in "how to install Windows 7 without the disc" However more faster/easier solutions would be greatly appreciated.

     Thank you for your help,

     Franchises

  Franchisees, welcome to the forum.

  Here is the guide to order the HP recovery media, if it is still available.  Also, here is the system Recovery / backup / restore section for the computer.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• HP 110 mini book requested for password on the switch on

  Anyone can help with my problem. I am asked to enter a password when that I start my notebook 110 hp.

  Thank you pfindla

  Pfind try.

  e9lofqxkqd

  3rd letter tiny L.

  4th letter lowercase O.

  6th and 9th Q lowercase letter.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Set up the router password

  The tec of cable company told me that I needed a password on my router (WRT54GSv2) I read some comments on that, but it makes no sense me.

  Where to find the settings of the router : the router password is usually on one of the pages 'Administration '. The other settings are in the section 'Wireless' pages of configuration of the router , located at 192.168.1.1

  Might as well be written in Russian, makes no sense for me, where can I find the pages of 'the Administration '?

  Where can I find "wireless" section of my routers setup pages?

  My router has been implemented for some time and now I want to set up a password, in simple terms how to do that and where should I go to? I see nothing in my computer that says Linksys?

  Unplug the router everything. Turn on the router. Press reset for 30 seconds (check all lights in the weighing, if they do not change all by pressing the button, it's probably broken).

  After reset, wire a single computer to the router. Now try to open http://192.168.1.1/

• Router password

  I have a WRT310N router.  A computer (Vista) and the printer are wired and 3 other computers (XP) connect the wireless.  My wireless computers need to have my router userid and password entered each time they restart their computer and you want to print to the shared printer.  After entering the password printing works very well.  I can't continue what I won't give my password to these users, so that they simply cannot print if I'm not around.  I have my wired computer discovery network, file sharing and print sharing enabled.  I set my router for 'trust' of these computers.  I have Network Magic installed on the network and it says everything is fine.  I tried everything I read in these forums, and I can not find a configuration where my router does not have these users with a password every time they want to print.  Any advice would be appreciated!

  He asks the router password or security/network key?

  Once you put the password... Check the box that says "Remember my password" or "Do not ask me again" on the same window.

• Router password already filled in, but still access with password standart | MAC-addresses?

  Hello

  
  

  The router password is already filled in, someone else did it for us or it could be standard. But I can still connect with the standart password: admin, what do I do?

  
  

  Second thing: I would like to fill in the addresses-mac, but I have had three when I search in CMD...

  
  

  Thank you!

  PS version: Linksys WRT54G 5.1 (I can't find it on the site)

  No it just display 16 *.  Don't worry because "admin" work on this subject.  It will always show up to 16 characters, no matter how much you have.

• How can I change the password on my printer to match the router password?

  Original title: wireless printer help

  Recently, I changed the password on my router at home. I have a Lexmark wireless printer attached to my laptop and you cannot print because of the password. How can I change the password on my printer to match the router password?

  Reset the router.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• How to reset the router password

  Original title: router password

  How to reset router passes to its original, it changed by itself, or maybe I did something?

  Hello

  Normally there is a reset button on the router back to factory settings.

  Then affect you until you want to again.

  Read the instructions on how to do it at the website of the manufacturer of the router.

  Example only:

  http://KB.NETGEAR.com/app/answers/detail/A_ID/120/~/how-to-configure-a-NETGEAR-DSL-gateway-for-Internet-connection-with-smart-wizard

  See you soon.

• How to make windows require a password during the installation of new programs?

  How to make windows require a password during the installation of new programs?

  Hello

  You will not be able to circumvent the password that appears before the execution of actions (installing a new program) in a non administrator account.  If you are logged on as administrator, and again, you get the command prompt, you can disable UAC (User Account Control) to stop the password dialog window.

  However, as a work around you can right-click on the installation of the program files and select run as administrator. Check if this is useful.

  Let me know if I can help you with this question or any problem related to Windows.

• How do you 'unsecured' a document if the original sender does not know how the document became "secure"?  Error message is requesting a password.

  How do you 'unsecured' a document if the original sender does not know how the document became "secure"?  Error message is requesting a password.

  Hi Kris,

  We need password to open the document, there is no way to unlock the pdf without password.

  Kind regards
  Rahul

• Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now

  Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.

  Hi Matt,

  I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud

  Kind regards
  Rahul