Set up the router password
The tec of cable company told me that I needed a password on my router (WRT54GSv2) I read some comments on that, but it makes no sense me.
Where to find the settings of the router : the router password is usually on one of the pages 'Administration '. The other settings are in the section 'Wireless' pages of configuration of the router , located at 192.168.1.1
Might as well be written in Russian, makes no sense for me, where can I find the pages of 'the Administration '?
Where can I find "wireless" section of my routers setup pages?
My router has been implemented for some time and now I want to set up a password, in simple terms how to do that and where should I go to? I see nothing in my computer that says Linksys?
Unplug the router everything. Turn on the router. Press reset for 30 seconds (check all lights in the weighing, if they do not change all by pressing the button, it's probably broken).
After reset, wire a single computer to the router. Now try to open http://192.168.1.1/
Tags: Linksys Routers
Similar Questions
-
How can I change the password on my printer to match the router password?
Original title: wireless printer help
Recently, I changed the password on my router at home. I have a Lexmark wireless printer attached to my laptop and you cannot print because of the password. How can I change the password on my printer to match the router password?
Reset the router.
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator
See you soon.
Mick Murphy - Microsoft partner
-
Uninstalled Cisco Connect to the router password now not recognized
I uninstalled Cisco Connect and now I can't connect to my wifi router. The password is not recognized. Do I have to reset the router as a whole?
Reset would do the trick.
-
How to reset the router password
Original title: router password
How to reset router passes to its original, it changed by itself, or maybe I did something?
Hello
Normally there is a reset button on the router back to factory settings.
Then affect you until you want to again.
Read the instructions on how to do it at the website of the manufacturer of the router.
Example only:
See you soon.
-
I have a p7-1240 and you want to reinstall Windows 7. "When you get into the bios, he keeps asking a ' set password 'when try to do something. Cannot change the order of boot without it.
Does anyone know this password? Several solutions have been applied to this problem... call to HP... using the CMOS switch... and pulling the battery... all these actions did not
If anyone has the password or a viable alternative, it would be greatly appreciated. Know that I am the sole owner of this machine and I never put a password on my bios.
What the devil?
Thanks for all the help with this particular number Cheryl.
The Solution:
Please note that the password switch is in the lower right corner of the Board of Directors very close to all of the SATA connectors and it's well hidden. The CMOS switch is more located in the room near the battery and pretty easy to find.
http://support.HP.com/us-en/document/c03343058
I made three different operations all very similar, but something seems to do the trick.
First of all, I followed the manufacturer's instructions to clear the bios password. Then I repeated the procedure with the machine plugged but POWERED down. (Be careful here) Someone had mentioned the need for a residual current clear the password, and because the case was open I tried anyway. During this procedure, I managed to drop the small plastic connector and I was unable to recover after 20 minutes that my case has access by only one side. The switch clear Bios should be left open. That is to say, he didn't have plastic connector on any of the 3 pins.
I've run procedures one after another to clear the bios password without having to restart the machine...
I'm not sure what actually deleted the password, but I now have full access to the bios.
I hope that everyone in the same situation as this information will be useful.
Thanks again for all the help
-
How can I set/change the HDD password?
I have a W700, RAID 0 configuration and sometimes back I had put passwords to start for the two discs. But for the life of me, I don't remember how I did and where I'm going to change the passwords! Anyway, if you can enlighten us, I would be very happy. Thank you very much.
Press F1 at startup to get into the bios, you will be asked to enter your passwords. Select the Security menu, then select the menu password, hard drive password can be changed here. After selecting the pw of hd, that you want to change you enter the current pw, and then a new twice each time confirm with the Enter key.
Hope this helps
-
How to get letters to enter the router password wireless on XBR55x850D
Hello
does anyone know how to get the letters to enter the password for the Wifi on the XBR55x850D? It is a smash and has not any possibility to enter letters...
Thanks in advance.
We got the answer: go to keyboard settings and make sure that it is on the keyboard Leanback. TV starts on this parameter, but it does not work. I recommend trying to move to another parameter, then it switch backwards for it records keyboard Leanback.
-
Problem to set up the temporary password
Hello
I have reset the password of any of our users. He received two letters, containing a temp url and another temporary password as usual.
but he is not able to connect to the application and reset his password using temp url. Whenever he gets "sign in error: the link contains an invalid token '.
Same prob was confronted by another user too but he got through it the second time reset the password.
Can I know what could be the problem?
any solution to this problem?Hi user10434678,
Please check the user's role, for which you are resetting the password, includes the privilege * "reset password."
If the role does not have the same privilege, it cannot reset the password of his user profile reset.
Hope that this info will be useful for you.
Feel free to ask for more!Aarti Gupta
iWareLogic
-
EA6500 router password stop working when on the Internet
My question is quite simple but really difficult to understand on a logical point of view.
I have a new EA6500 (v1), I hung on the network and set it up using the router password by default is 'admin '. I have configured the PPPOE connection to my internet and then, as soon as it is connected to the internet, I am not able to connect to 192.168.1.1 more because it says that my router password is not valid. If I just disconnect the WAN cable and refresh it, the router password works now.
I tried to change it and it continues to operate only if the router is not connected to the internet. When it is connected to the internet, I click on the "local access" mode, but get the same error "router invalid password." If I log in using my account Smart Wi - Fi, I get the error "error_gets_network" which disappears after about 1 sec and then it is up to the login page, or sometimes, it will simply ask the router password which will not work in any case.
I have the latest firmware, but I reinstalled it always manually without success. I tried a few resets hard too but the problem is still there and it's really annoying because I can't go to the router configuration without cable router WAN. And I can't link my smart Wifi account since obviously the router password is not recognized and more if I'm on the internet.
Any ideas?
I tried with the latest version of Google Chrome (cleared cache and everything, and since it does not work when the router is not connected to the internet, I don't think it's a browser problem). Interface does not work with the latest version of IE (even in compatibility mode, maintaining the interface tells me to download the latest version of Internet Explorer, it's really ironic).
Try Opera or FF? If IE 8, 9, 10 or 11, test value and mode of compatibility again.
Disable any security browser addons such as No Script and Ad-Block or set them to allow all Pages when it is connected to the router.
Clear all caches browser.
Don't forget to log on to the Admin account on the router.
Try disabling these features in Chrome:
Top right corner, few bars options > settings > settings (left) > see the advanced settings.
Uncheck the box for these:
Use a web service to help solve the navigational errors
Use a service forecast for complete searches and URLS typed in the address bar
Predict the actions of the network to improve the performance of page loading
Activate the protection from phishing and malware -
EA4500: Change the password of the router
My router password is '55xxxxx '.
But when I want to change the router password in CCC, it tells me that 'the current password is not match'
Someone knows why?
I don't know why, but it's ok now.
-
I have a WRT310N router. A computer (Vista) and the printer are wired and 3 other computers (XP) connect the wireless. My wireless computers need to have my router userid and password entered each time they restart their computer and you want to print to the shared printer. After entering the password printing works very well. I can't continue what I won't give my password to these users, so that they simply cannot print if I'm not around. I have my wired computer discovery network, file sharing and print sharing enabled. I set my router for 'trust' of these computers. I have Network Magic installed on the network and it says everything is fine. I tried everything I read in these forums, and I can not find a configuration where my router does not have these users with a password every time they want to print. Any advice would be appreciated!
He asks the router password or security/network key?
Once you put the password... Check the box that says "Remember my password" or "Do not ask me again" on the same window.
-
Need to change the wireless password as soon as possible.
Hello
I was recently sharing my WiFi with a close friend nearby but unfortunately he, or his children, were downloading music illegally therfore making me get in touch with the Charter, blah blah blah... I tried to change my password for wireless, but for some reason, I can't understand it. I would really appreciate some advice if possible. I thank you all for time and hope to hear from you soon.
Bryan Stoner
Hello
The access password is in the router to verify with the support of the manufacturer of the router. Most are online
help for this, even though setting up as new. Change the router password, even to change the SSID
(name) and then only you should be able to open a session.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I can connect to the router but no internet connect windows 8
I took each of boredom that my NEW HP envy provides however I still get a no internet connect error. If I reset my router and checked that it is acceptable. I can reset everything and internet will work for no more than 30 sec. I know that the internet is able to work as I plugged the ethernet cable, but I want it is wireless! What to do next! ?? !!
Hello
Check with HP Support, their online documentation and drivers, diagnostics,
and ask questions in the forums about known problems.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/===============================================
Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmMicrosoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8 - Hardware
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft - Windows 8 - why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft - Windows 8 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctlyDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I tried to connect the router to home port to efax. Having hard time understanding connection. Don't know which network in the list I'm suppose to connect to match the router password.
The network you should be interested will generally be the first listed item. By following the previous steps, you can check this on your computer.
As Super-Dave pointed out, however, this printer has a built-in for eFax support.
To use eFax with this printer, you synchronize your eFax account with your email and print faxes that you receive as attachments to email like you would for any other file.
-
Names of the devices connected to the router
How can I tell the names of the devices that are connected to my router E2000? Cisco connect says I have 4 devices but I only have 3. I'm trying to understand source of the 4 device.
Open the Cisco connect software. Go to "Setting up the router" and click "Advanced settings". Who will open the router configuration page.
Click the status tab. Go to the tab "Local network" sub on the button "DHCP Client table". Here is a list of the devices connected to the network.
Maybe you are looking for
-
Safari 10.0 cannot be updated
I have an update for Safari 10.0 in my app store, but when I click on update, it doesn't come, it will not even begin to download. Please help me. Thank you
-
During a bet to update, automatic update of windows has started and some how much my profile data has been removed and stored in a file on the desktop. There is a simple and easy way to restore this folder from the current firefox?
-
When I try to start the application process, I get a message saying that my browser is not supported by the web site. He told me that Mozilla Firefox 3.6 is the browser that I need to run. Is it possible to go back?
-
HP spectrum x 360 G1 H9W43EA: Question random BSOD HP spectrum x 360
Nice dayA few weeks ago my laptop had against accidental damage to the display. I immediately sent it in repairs to ensure IT Services in South Africa, they're a HP authorized repair center. They sent me a quote asserting that the RAM is faulty as we
-
So, when I go in the about this Mac > Storage, he says I have 396 GB to 498 GB free. That would mean that I used about 93GB. The strange thing is that the bar below shows a totally different story. Its said that the only 'Apps' category uses 250GB wh