eager to upgrade/repair an HP g6 - CPU/GPU of the 1d60us

Similar Questions

• Broadwell CPU/GPU in the new iMac 21 inches will meet the system requirements? Or is a dedicated GPU still necessary/preferred?

  Seek an editing machine dedicated to work. My employer and I are leaning toward the new iMac 21 inches. Would have preferred the GET a older with GeForce GT 750 M, but that the ship has sailed. This new configuration will work? Is there another solution that I'm dominant?

  You are right on the use of 21-inch Broadwell. I missed that part of myself. The GPU acceleration is where the handle of the GPU of some framework aspects during the processing of image data in real-time or rendering. In the case of Adobe the GPU handle scale IE a resolution, interpolation and some FX. Those who normally take a significant amount of CPU resources by image that makes discharging them to the much more efficient GPU for the amount of data processed at the same time. This allows the CPU to focus on the decoding and encoding of data, which can take significant resources according to the multimedia codecs. Adobe added some acceleration for some Intel GPU a while back, but I don't know if this includes I7 Gen 5 or 6 Gen Intel GPU underway and those who. If it's not that I think it not then using Intel or AMD won't matter that acceleration is turned off. AMD open CL would allow much better performance edition in the future when Adobe finally cleans the Open CL.

  Eric

  ADK

• [W510] crashes during use heavy CPU/GPU | possible overheating

  Hello

  I have a problem with W150 6 - week old I am just unable to provide. I tried a fairly recent game to test the hardware capabilities of my new camera. However, when running this game, it crashes at irregular intervals.

  MACHINE:

  ThinkPad W510, 4389-W1B Type

  Intel i7 Q70

  nVidia Quadro FX 880 M

  4 GB OF RAM

  Windows 7 Pro 64-bit

  SETTING:

  The game in question is 'Mass Effect' (2008) with graphics almost maxed out settings (720 p and maximum of details). The machine has all the latest drivers and BIOS installed.

  BEHAVIOR:

  The machine is appearently under a heavy load of CPU/GPU with the fan at the highest speed. The causes of the accident the screen go blank and feeding the machine in less than a second after a short hard disk activity. The time until the machine hangs when running the game differs between 3 to 30 minutes.

  COMMENTS:

  I installed the tools, namely TPFanControl and SpeedFan temperature monitoring. The CPU does not get like 80 degrees Celsius, the temperature of the GPU also doesn't exceed 80 degrees Celsius. The accident occurs only with this game of 3D acceleration. However, it is the most demanding game I posses. The question seems to be temperature related since it usually takes much more time to plant the device switching on after a long time being turned off, or in a cooler environment.

  SO FAR THE TESTS:

  I have run several tests of stress on the machine, namely of Prime95 (max CPU temperature: 86), FurMark (CPU: 85, GPU: 80 c) and 3DMark. All passed without accidents (when running for about 1,5 hour maximum). I got the latest nVidia drivers installed, as well as the latest graphics drivers approved by Lenovo. I tried other games with resolution 1080 p and maxed out settings, but the accident only with "Mass Effect".

  CONCLUSION DATE:

  Like many, I can tell, when you run the game, CPU or GPU become warmer than during the stress tests. Nevertheless, the problem "seems" related to temperature. The fact that I don't have to plant with any other game machine or a stress test makes me assume that Mass Effect is just wrong with Windows 7 or the material. However, to my knowledge, bad code or bad drivers do not cause such a crude system shutdown.

  Well, I really don't know what o think about it. I don't want to make use of Lenovo support, unless it is really an anomaly in the system. I would need to get along without my laptop for 2 weeks, which is a long time in view of the fact that it is my primary work machine.

  So my questions to the community are:

  1. is it possible that this is a temperature related problem after all? Despite the positive stress test?

  2 is it possible that these accidents are caused by bad drivers or bad programs?

  Tips are greatly appreciated...

  I don't think it's an overheating problem, it is more likely a software/driver problem or a hardware problem. I am inclined to think that it is the last.

  The system should go in a judgment of thermal overload until less than 95 degrees. 80 degrees is on the beach of normal operation for the GPU and the CPU temperature when loading at 100% load.

  Try to disable the Turbo mode, also have you tried to perform a test on the ram?

  In addition, update a bios may be a good idea if you don't have it already done.

• Pavilion g6 - 2217cl: the HP Pavilion g6 - 2217cl RAM and CPU/GPU upgrade

  Hey there, I am looking to upgrade the RAM and CPU/GPU on my G6 Pavilion. Here's my current characteristics;

  Laptop model: HP Pavilion G6 - 2217cl

  Operating system: Windows 10 family (x 64)

  Current RAM: 6 GB (used 2 slots)

  CPU/GPU: AMD A8 - 4500 APU with Radeon HD graphics card

  What are the possibilities should I upgrade?

  If more information is needed, I'll be happy to provide.

  It supports up to 8 GB of memory and the processor can be upgraded to a 10 - 4600M. Here is the Manual:

  Manual

  There is no video card to upgrade, but for the models of series AMD A video is contained in the processor itself and an upgrade of the processor also carries with it an upgrade for HD 7640 G HD 7660 G video. It's light but a bit noticeable and clock speed go from 2.8 ghz to 3.2 ghz, which is not huge but noticeable. Memory is a DDR3-1600 module, and you can replace your 2 gig with a 4 gig to spend 6 to 8.

  Memory upgrade is as easy as... CPU/APU don't upgrade not so much.

  4 GB PC3 12800 1600 MHz shared 641369-001

  http://www.Amazon.com/HP-641369-001-1600Mhz-PC3-12800-memory/DP/B008L325TW?ie=UTF8 & Keywords = 641369-001 & qid = 1465472116 & ref_ = sr_1_2 & SR = 8-2

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion 17 E0J97UA: Is it possible to upgrade 17 Pavilion i3 i5 CPU?

  I want to upgrade my Pavilion 17, product number: E0J97UA of the Intel Core i3 - 4000 M CPU @ 2.40 GHz processor to a processor i5. Page 85 of the third edition of "HP Pavilion 17 TouchSmart Notebook PC HP Pavilion 17 Notebook PC Maintenance and Service Guide" shows that it can evolve into the processor 2.20 GHz Intel Core i7-4702MQ. However, there is no mention of an upgrade to i5. Is there an i5, that this can be improved? Thank you

  mike99002 wrote:
  I want to upgrade my Pavilion 17, product number: E0J97UA of the Intel Core i3 - 4000 M CPU @ 2.40 GHz processor to a processor i5. Page 85 of the third edition of "HP Pavilion 17 TouchSmart Notebook PC HP Pavilion 17 Notebook PC Maintenance and Service Guide" shows that it can evolve into the processor 2.20 GHz Intel Core i7-4702MQ. However, there is no mention of an upgrade to i5. Is there an i5, that this can be improved? Thank you

  FOR INFO. There is no official driver HP for Win10.

  http://h10032.www1.HP.com/CTG/manual/c04069163

  Page 25 shows the iNtel processor.

• Alienware X 51 R2 CPU & GPU Upgrade

  I have an Alienware X 51 R2 with a motherboard 0PGRP5. I currently have a processor Intel Core i3-4130 @ 3.4 GHz and a GeForce GTX 645. I'm looking to upgrade my CPU & GPU this holiday. What CPU and GPU is compatible with my system?

  Thank you

  Hello

  Here are the options of CPU and GPUS validated for this system.

  CENTRAL PROCESSING UNIT

  • I5-4440
  • I5-4460
  • I7-4770
  • I7-4790

  GPU

  • NVIDIA GeForce GTX 660
  • NVIDIA GeForce GTX 750Ti
  • NVIDIA GeForce GTX 760
  • NVIDIA GeForce GTX 960
  • AMD, Radeon R9 270
  • AMD, Radeon R9 370

• Svchost.exe causing 100% cpu usage during the update of windows, even when disconnected.

  I recently had to re - install windows xp on a new hard drive for replacement. My version of xp home edition, SP2 OEM installation disc. (This is ith group included IE6)

  Once installed and running, could access windows update.

  Read all the threads associated etc. and installed SP3, disc after downloading microsoft on another pc. Installed after three trys, first two caused various mistakes, but third attempt seems OK!

  I've also updated the IE6 to IE8, as some sites obviously did not work properly with the older browser.

  Now go do the automatic updates, or log for manual updates... BUT!

  During the process, my cpu fan comes on fast and permanently! The CPU usage is showing that 100%, pc slows to crawl, the mouse becomes slow etc.

  This has never happened before on this machine before you reinstall clean, he had already automatically updated to SP3 and went very well, it was some time ago, before the failure of hard drive, and it has never had this problem!

  Only since having to do a cleaning manual update and re - install.

  The culprit seems to be svchost.exe, once it is used by the update, running the cpu at 100% and continues to do so EVEN after stopping the service, until I manually stop with the Task Manager!

  The svchost.exe instance showing a high is use: SYSTEM.

  According to the files of help here, it is a known issue and a fix KB927891 was issued for SP2, but this should NOT be necessary for SP3, and in fact difficulty used to perform anyway under SP3!

  Ideas for a guy to fix?

  I appreciate the support for XP runs out quickly, and after this update of windows will be redundant, but in the meantime it is always useful!

  Also if I turn off the automatic updates, how can I stop this annoying popup warning bubble?... I can't live without updating, but this bubble nag drives you nuts! :)

  OK just a update, now running cool and 100% auto update and manual update... How? I hear you ask...

  Well I had a beer and a reflection and came to the conclusion, it must be 'order' in which I updated the clean installation of XP.

  Origin, I loaded the old OEM disc new hard disk, loaded the drivers etc, then stop at windows update for updated files.

  Who told me my old incompatible browser and suggested an upgrade.

  I downloaded and installed IE8... still no joy, reading the forums comments I downloaded and installed SP3... which SEEMED to work, BUT then all the hassle of cpu to 100% with the automatic update and updated manual on the windows don't update site!

  So I just gritted my teeth, formatted the drive, another OEM of XP Home Edition SP2 installation loaded the drivers, installed a copy saved to SP3 and after restarting, THEN installed a saved copy of IE8 and THEN trotted off the coast to the windows update site... low and behold, it the connection without problem, did a search, and required updates appeared on the screen without delay all 123 of them...! :)

  Did the updates, restarted and everything was fine, updates automatic in market and left the machine, after about 30 minutes appears the yellow shield, and it downloads a couple more update files without problem.

  All this time I followed the via the Task Manager CPU usage and the strange spike waited 100% apartment, it was on average from 5 to 20%!...so a great improvement has this effect, by simply changing the order of the updates installed from the original! SP3 IE before IE8.

  May not work for all have to do a clean install because of the HD failed, but its worked for me, and I am once more a "happy bunny!

  Dave was soon.

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• (Repair) virus killed file system; What is the best way to rebuild the system?

  System of Vista Business 32 bit SP2 from my child was hit in the wrong by a virus; When you run the repair virsu he deleted system files infected and he now gets repeat BSOD.

  No, the Startup Repair is not going to fix the system, and the virus seems to have killed all the restore points. also can not get SFC / SCANNOW to run correctly.

  So: I went to (a huge field of) struggling to set up a Slipstream installation DVD of Vista SP2 (since the original installation disc supplied with the system was only vanilla Vista).  I thought that I could load that and select the 'Upgrade' option and simply rebuild the Windows system, keeping all my programs and data.

  But no, after loading, the system informed me that "upgrade has been disabled", as well as the comment for clarification: "-to update, launch the windows installation"-that sure I can "t do since I can't display the corrupt system virus even in safe mode.

  SO - I have a few questions:

  (1) FIRST: was first my hypothesis?  In other words, if I COULD bring up Windows on the machine damaged (even if only in safe mode), would be the upgrade, go ahead and work - whereas the old system corrupted virus was also VISTA SP2?  Or - the installation would inform me that he could NOT make an upgrade because it would detect that the previous version was indeed also VISTA SP2 and therefore "knowledge" that he could not (really) do an upgrade?

  (2) assuming that the answer to #1 is 'yes', then: is there a version of Vista Installable (same one I might need to buy) that could make the upgrade, even if the Windows system being upgraded can not come?  IF this is NOT the case: what is an installable version upgrade of Windows 7?  or it is the sad reality that no matter what version of Windows I buy, I can't choose the 'Upgrade' option unless the installation is load/run Windows on the upgraded system?

  From previous posts, I have all kinds of good advice on how to retrieve data on corrupted system files, so if there is no other alternative, I'll do it - but this is my last resort because:

  b its a lot of your time working are going to extract all the files and

  (b) his work even more of your time then having to charge all third party software (including some I have no disks to install for more) if I find myself

  having to do a clean install of Windows.

  So, if there is no alternative to an upgrade - if I have to shell out some $$ for a new version of Windows, I prefer to do that.

  Appreciate all advice-

  Hello RDougShelton,

  Take a look at the following article:

  Cleaning a compromised system
  http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  If there is a virus on that system, in other words, there is no way to be always sure that she has been completely removed outside of the shaping machine and put it back.

  There is no guarantee that an inplace upgrade will fix this problem.

  I recommend to backup your data you mentioned in your original post.

  Best regards

  Matthew_Ha

• Anytime W7 home prem upgrade to profess W7 cannot be rerun on the same machine to possibly fix the errors.

  Computer: HP Pavilion G/1070 us laptop. Original OS W7 64 Home Premium SP1

  15 Aug-2914, I had some freezes and problems of instability and learned on the web that a upgrade type installation could clean debris from its difficult use of several years.  I went on the website anytime upgrade Microsoft and bought an Anytime Upgrade for W7 64 SP1 PROFESSIONAL and installed from the Internet Anytime site. The key to the new system has been inserted automatically and a copy sent to me by email with the reception that I printed.

  The process went well and in the end my initial home screen was displayed. I checked email and tried a few other tasks, and everything seemed fine... I clicked stop, and (as I remember) a stream of file system names began to scroll to the bottom of the screen indicating that they were part of the upgrade process. I turned off the computer.

  This morning, I restarted Windows and experienced some of the friezes original and instability... I reasoned that if I restarted the install of Win 7 Premium and careful I might be able to check updates and fix the problem. This was not possible. The Windows Anytime Upgrade site rejected the upgrade key that I was copying the receipt of Email for my purchase (I tried at least 10 times). I could not find any contact information on the site and I noticed that my received email was sent from an unmonitored address.

  THANKS FOR YOUR HELP

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  2) run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  = If you are still having problems =.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (D) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (E) if still Anytime Upgrade fails, turn off User Account Control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (F) if it continues to fail, try the following 3 methods:

  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• The upgrade from Lightroom 5.2 to 5.3, the desktop disappeared

  Tonight, I downloaded 5.3 Lightroom which was an upgrade to 5.2.

  After completing the installation, I noticed that I still had my Office 5.2 icon, but this time there was no icon of 5.3.  I launched the 5.2 icon only to get an error saying the program did not exist and he offered to remove the icon.  I tried the same thing in the start menu with the same result.  No. 5.3 icon to launch the application.  I did a repair on the installation and restarted the PC with no luck.  Any ideas?

  Thank you

  Well, you can always manually create a shortcut to find the application in the installation folder...

  Mylewnium

• I am running Yosemite. Should I upgrade to El Capitan before moving on to the Sierra?

  I am running Yosemite. Should I upgrade to El Capitan before moving on to the Sierra?

  No you do not.  Lion 10.7.5 or higher, you're in the clear.

  MacOS Sierra - technical specifications

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• The CPU meter on the dysfunctions of transport bar

  At the far right of the Transport bar is a CPU meter. When a project is first opened on LPX, this gauge is the most crazy. It takes about 30 to 60 seconds and sometimes more. During this time, I am unable to play any project - the sound stutters. There is nothing I've been able to do to eliminate (or same gear up) this anomaly.

  (a) what could be the cause?

  (b) how could this problem be solved?

  Thank you

  It's perfectly normal: your content (sampled instruments, inflected tracks, audio files) is loaded into the RAM disk, using all available CPU power. The only thing that you can "do" is less sample content or less flexed titles. Or simply wait 30 to 60 seconds.

  I sometimes play a project that takes over again, but that's useless, the project will stutter and he will miss notes instrumentsa who are not entirely responsible.

  It may also take longer if you have other applications open (webbrowsers) because the contents of the RAM may need to be swapped to and from the disk.

  Opening & downloading a project of average size (with an already high logic) just took me 1'25 "."

  Two more $ to speed up: increase the RAM or use SSD (s) to store your recording and storage of the content of the sample.

• HP Pro slate 8: HP Pro slate 8 (K7X61AA) - OTA upgrade has failed and not able to apply the HP upgrade.zip

  Last week, I received the tablet. Since then, the OTA update failed 3 times. So I searched around the Web and found a page which State to load the update.zip to SD card and install on recovery Menu:

  http://h30434.www3.HP.com/T5/Android/Pro-slate-8-updates/TD-p/5224651

  But it does not work also. After the system says 'check' package it briefly shows the Android Robot for less then half a second that an i will be back to the Recovery menu.

  Allocation of resources.

  Thanks D.

  Solved by myself.

  The upgrade from SD card did not work, because the tablet had a problem with my SD 32 GB Class10 card. I used an 8 GB Class 4 and it worked fine.