HP Pro slate 8: HP Pro slate 8 (K7X61AA) - OTA upgrade has failed and not able to apply the HP upgrade.zip

Similar Questions

• Not able to install the common module on satellite Pro A120

  Hi guys:
  I recently reinstalled xp professional on my satellite pro A120. I could download and install the main drivers of http://uk.computers.toshiba-europe.com and my phone is functional. However, I did not all sounds and (F6 & F7 and toggle) function keys not working, even after insalling the sound card. I read some of the posts on this forum and found that I needed insall the 'common' module to make them functional. I downloaded the driver from module common too, but when I run the Setup it starts initially, but fails both the configuration is complete.

  The same thing happens also with a few other drivers as saver of energy etc... I was not able to run the Setup program for the common module & driver power saver, basically, nothing happens after I have the respective installation.

  Can anyone help please?

  Pravesh

  As far as I know on the download page you can find the installation instructions with exact installation document order how to install drivers and tools specific to Toshiba and utilities.
  You have installed all the stuff after this installation order?

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• I bought Adobe Acrobat Pro Extended 9. My laptop got crashed and now I want to install Adobe Acrobat Pro extended 9 as I have the serial number for this product. I'm not able to find the download link for this product, but there is a link to Adobe Acrobat

  I bought Adobe Acrobat Pro Extended 9. My laptop got crashed and now I want to install Adobe Acrobat Pro extended 9 as I have the serial number for this product. I'm not able to find the download link for this product, but there is a link for Adobe Acrobat Professional 9 and I download and run the program installation and entered the serial number and it shows incorrect serial number. I need fix the download link for Adobe Acrobat Pro Extended 9. Thanks in advance.

  Windows:

  Download Acrobat products | 9, 8

  Mac:

  N ° 1)

  Click on the below link, Sign In and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements

  Note: * If we do not keep the page of items in Photoshop, we will have access denied error message when file downloading install direct.

  Then click on the link below and download the installer directly mentioned in step 2.

  Step 2)

  http://trials2.Adobe.com/applications/Acrobat/APRO/9/APRO9_Mac_WEB_WWEFG.dmg

• the adobe reader of adobe purchased but installed standard first pro. now, the 'pro' trial has expired and I can't use the "standard" functions

  I bought the adobe reader from adobe but installed standard first pro. now, the 'pro' trial has expired and I can't use the "standard" functions How can I solve this in order to use Adobe Standard - one that I bought?

  Hi Jodie,

  There is no standard to pro versions of Adobe Reader.

  You have downloaded the Acrobat version which is paid instead of Adobe Reader software.

  As the trial has expired, then you won't be able to use it unless you have purchased the product.

  However, you can download Adobe Reader for free using this link Adobe Acrobat Reader DC install for all versions.

  Kind regards

  Nicos

• HP Officejet Pro 8600 e-All-in: similar question: not able to 'change the Scan tasks '.

  I have a similar problem as "ccb531", released 23/07/2015 08:22. I am unable to "Change Scan tasks" with the HP utility software. It gives the dialog box box below I need to install "HP scanning software".

  

  I installed the driver (alone) which is available on the site of HP support for my printer (HP Officejet Pro 8600 - N911a) and my operating system OSX 10.11.1 (El Capitan).

  I also followed the procedure that has been described by the support team in the post of 'ccb531', published 23/07/2015 08:22. That is to reset the printing system,uninstall the drivers and software, (repair your disk permissions is not longer available on osx 10.11), install all updates Apple and reinstall your software and drivers. But with the same result.

  Have I missed any other driver that is not listed on the support site or is the HP Easy Start on 18 November 2015 2.1.0.66 driver not yet fully functional for El Capitan?

  Any help would be much appreciated since I can't change the scanning resolution when scanning my documents on computer from my printer document feeder if the documents are too large to be useful.

  Thank you.

  Hello

  Install the HP Easy Scan app below, then try to change the scan tasks once more:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi

• Windows 10 Pro has failed and I restore my laptop OS (Widnows 7 pro) plant how can I upgrade again to Windows 10?

  Dear Ms team

  In October, I've upgraded to windows pro via Ms 10 and after that error during the download of updates in Nov 22, all possible windows for disk repair HARD is not too and on DVD for windows 10 cannot repair my Sony Vaio VPCF1.

  So now, even once, I want to upgrade to Windows 10 please advice how I can, also here the internet speed is low.

  Your more early comments very appreciated.

  You can download the. ISO for Windows 10 November update and upgrade the repair:

  How to download official Windows 10 ISO files

  then

  How to: upgrade an of repair using the file ISO for Windows 10

  also check:

  How to: 10 tips before installing Windows 10

• Why am I not able to install the first pro who keeps throwing error U44M1P7?

  I tried to install the first Pro 6 times now and it keeps failing. The last attempt threw the error U44M1P7.

  U44M1P7 - updates: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  ... a solution to this problem.

  1. launch of CC App (Photoshop, Illustrator, etc.)

  2. go to HELP-> UPDATES

  3. He will start Adobe Application Manager, then uncheck the BOX ALL of Adobe CSXS Infrastucture 4 files (910 KB) under all of your applications up-to-date.

  4. click on the REFRESH"" button.

  U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS: http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

• Satellite Pro R50 - B - not able to find the ethernet LAN driver

  I'm working on a windows 7 64-bit Image for the portable Satalite Pro R50 - builfing B.

  I can't locate the Ethernet adapter at all.
  I tried all the downloads of drivers on the official website, but nothing works.

  There is no unknown device in Device Manager and there is no other than the wifi network adapters those. Ethernet is enabled in the BIOS.

  The building had been tested on 8 different cell of the same model so not just a case of port defective. We plague equine laptops were build with Windows 8 and works very well.

  Any suggetions?

  All the drivers, but also the Realtek LAN driver (Win 7 32 bit 64 bit and Win 8.1) can be downloaded from the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  I think that the laptop was equipped with the Realtek module and the driver from the driver page should work.
  But you can also use the mini PCI database to find out more information on this module.

  HowTo:
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  Have you tried to install the driver in Device Manager?

• Not able to download the MFL Pro Suite

  Assistance to locate and download MFL Pro-Suite

  I can't redownload MFL-Pro-Suite witch seems to affect my ability CC3?

  Hi AletaTurrentine,

  If the MFL Pro Suite software from Brother printer, you can download the software from this link.

  http://www.brother.com/HTML/download/index.htm

  Hope the helps of information.

  Please post back and we do know.

• LaserJet Pro 200 color M27nw: Scan works in wifi and not available on USB key intermittently

  I am a M27nw of Color LaserJet Pro 200 and under Mac OS X 10.10.  The printer connects OK via wifi, but the analysis fails often.  Sometimes it hangs and fails when parsing the preview.  Sometimes the scanner window opens but nothing happens and everything is grey.  And then, sometimes, it works!

  When I got the printer I have connected via wifi AND USB port to a Time Capsule.  It used to work and when I opened the Printers & Scanners on my Mac I see print and Scan option.  Now, on the port USB connected for this printer, there is NO scan option.  I can't understand why he won't do it and how to get the option scan via the USB connection.  Please help someone!

  Hi @kbolenba,

  By your post, I see that you have problems with scanning by wireless and USB connection. I want to help you.

  Connect the printer directly to the Mac and add the printer again. Then test scan.

  I also suggest you do the following to help resolve the problems of scanning wireless.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If there is anything else I can help you, let me know. Thank you.

• I'm not able to get the link to download Acrobat Pro XI

  Can someone please?

  Hello

  Please see the link download Pro or Standard versions of Acrobat DC, XI or X

  Let us know if this helps!

• I bought Adobe Pro in 2008 and I had to upgrade my computer and I am not able to download the software on my new computer, could you help me please?

  Could some help me please in this case?

  Hi Patricia, you can find more older Acrobat Pro download links here: other downloads

• using a pc with windows 7 pro, in the print LR 6 cc module I'm not able to find the button configuration page on the left side of the bottom of the screen, where is it?

  Running a pc with windows 7 pro, in LR 6 CC in the print module.  In the lower left corner of the screen, there is only a 'page setup' button and it heading me information of "printer setup".   Must have 2 buttons in the lower left corner of the screen... "the installation and configuration of printing the page program" cannot access information 'page layout'... need some help here.

  Tom Glendenning

  < < edited by moderator > >

  Under Windows, there is only one button.

  It's Mac OS which has 2 buttons.

  What exactly do you miss?

• My Adobe slate on an Apple iPad has ceased to be able to publish.  Even though I am connected to the Internet and can use the other cloud computing services, when I try to publish by email, app reports I am not connected to the Internet and check my

  Different do not seem to be any other parameters to be defined for the slate.  My iPad is able to connect to the Internet for other applications.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html