EAM work order numbering based on the type of work order

Similar Questions

• Can you have several lead scoring the workflow based on the type of contact Eloqua?

  Hello!  We are preparing to implement Eloqua 10 and I'm working on lead scoring workbook.  I wonder if you can have different lead scoring evoluted based on the type of contact Eloqua?  My company serves four distinct markets and was hoping that lead workflow notation might be different based on what kind of contact I connect to the.

  Thank you!

  Hi Lucie,.

  Yes you can, I would say at the outset you do not add too many criteria, but rather seek to constantly refine and edit your program (s) that you were going to.

• SQL script to insert values into a table based on the type of user

  Hello

  I have a requirement where I need to insert (username, groupname) in a table based on the user name.

  We have two types of user accounts:

  (1) user name, which starts with "DV" example: "DVPATM."

  regular user 2) example: 'PATM '.

  If the user name begins with "DV" under instruction insert should kick in

  insert into < tablename > (username, groupname) VALUES (< username > ' < groupname1 >).

  otherwise below insert statement should kick in

  insert into < tablename > (username, groupname) VALUES (< username > ' < groupname2 >).

  I need to use SQL or stored only procedure.

  Please suggest

  Thanks in advance

  All things being constant, you could use decode/case just for groupname by examining the first character t the user name, for example

  insert into (username, groupname) VALUES (, (substr ( , 1, 2) the case when "DV" then else end));

  Fixed edit: value for OTHERS, as noted by Frank

• Adobe Captivate 7 - is the review of the results of the quiz based on the types of questions?

  Adobe Captivate 7 provides the function that you can review the questions, and you can see which of them have answered correctly and that one of them has responded incorrectly. In my e-learning project, there is an exercise that consists of multiple choice questions and drag and drop tasks. This question / task landslides are among the content slides, this means for example after 5 content slides are a 2 slides, it issues then 3 content slides and slide 1 question and so on. The results of all the types of questions - multiple choice questions, drag and drop - are included in the results of the quiz. At the end of the e-learning the 'quiz' results slide comes with the button "check Quiz." I tested this function after exporting the e-learning of Adobe Captivate7. I noticed the following: If you click on the button "check Quiz" the learner back to all the question slides he or she responded. For that on question slides were automatically placed the buttons 'next' and 'back' and the 'inspection' on the ground it is written what the learner has responded to the two first questions are multiple choice questions. There, it works fine the two buttons will appear. After clicking on the button 'next' on the first question slide that contains a multiple choice question, the learner is the second slide of the question, which also contains a multiple choice question. The third issue is a task of drag / move. He do not appear the buttons so the quiz review stops and there is no field 'inspection '.
  
  How do I review the quiz works correctly despite types of questions?

  You will need to create the buttons that you want the slide D & D and format them to look like buttons on the other Quiz slides. Then hide them by deselecting "Visible output" in the properties panel.

  For these D & D slides, you will need a conditional action advanced or shared to be triggered on enter. The action will check the value of the system variable cpInReviewMode, which is a Boolean with the value of 1 by Captivate when you're in playback mode. If its value is in fact = 1 show you the hidden buttons. If you group these buttons, you will need only a single command:

  IF cpInReviewMode is equal to 1

  See the Gr_Buttons

  Continue

  ON THE OTHER

  Continue

• Use based on the type of DDL in question Replicat

  Hello

  Our destination DB has 2 additional columns by table REPL_CREATE_DATE & REPL_UPDATE_DATE of type DATE. We want to fill REPL_CREATE_DATE when the DDL is an INSERTION and we want to fill REPL_UPDATE_DATE when the DDL is an UPDATE.

  In other words:

  IF the DDL is then INSERT REPL_CREATE_DATE = @DATENOW ELSE REPL_CREATE_DATE = @COLSTAT (NULL))

  IF the DDL is DAY then REPL_UPDATE_DATE = @DATENOW ELSE REPL_UPDATE_DATE = @COLSTAT (NULL) )

  Is something like this in Goldengate?

  Hi, I found the answer in MOS!

  How to maintain created date and update date for a record using Oracle GoldenGate (Doc ID 1450299.1)

  of note:

  ogg_create_date = @IF (@STREQ (@GETENV ('GGHEADER', "OPTYPE"), "INSERT"), @DATENOW (), @COLSTAT (MISSING)).

  ogg_update_date = @IF (@VALONEOF (@GETENV ('GGHEADER', "OPTYPE"), "UPDATE", "SQL COMPUPDATE", "PK UPDATE"), @DATENOW (), @COLSTAT (MISSING)));

  So I have to use the GGHEADER option of @GETENV to return information from the header of a file of trail Oracle GoldenGate portion. The header describes the registration transaction environment. OPTYPE returns the type of operation.

  Create Date would be OPTYPE = INSERT

  and

  Date of update would be OPTYPE = UPDATE, SQL COMPUPDATE or PK.

  Possible results for OPTYPE are INSERT UPDATE DELETE ENSCRIBE COMPUPDATE SQL COMPUPDATE UPDATE & TRUNCATE

• OAS to redirect browsers based on the type

  Hello world
  
  I'm fairly new, when it comes to managing the OAS. I have worked with OBIEE for several years, but all work on the side SV (or OC4J) things made by a much more experienced DBA. So I apologize in advance if I ask you something that seems "silly".
  
  OBIEE is hosted as an application of the OAS. What I would do, is to have the OAS to host two different versions of OBIEE: 1 version for mobile devices and 1 for traditional computers. It turns out that not all graphs and charts make it good for mobile devices, in order to have a second environment for this purpose help much.
  
  I figured out how to set up the second instance of obiee to OAS. Now, I want to give users a unique URL. When a user connects to this URL, I want to OAS (or OHS) to determine if the user is on a mobile device or a traditional PC. I want mobile devices to be routed to URL_MOBILE, and I want standard devices to get routed to URL_WEB.
  
  Is this possible to do? If so, can someone point me in the right direction on how to implement?
  
  Any help or advice would be appreciated!
  
  Thank you!
  
  -Joe

  Have you tried to use javascript based browser sensitive redirection?
  JavaScript can detect or sniff the browser type, as well as the resolution of the screen, function to which you can redirect to the URL of your choice.
  You can use this little code in an index.html page and place it in your ESO htdocs directory.

  hope that helps!
  AMN

• size of disk usage report BUT based on the type of storage used

  It is an interesting question. I must point out a use of the vms in the UK disc. (that's the easy part) where I would appreciate help is...

  lets say I have 50 VMS, but out of these 50 vms, there are two types of storage: drive fast and slow, I can return my virtual machines.

  What I currently have is my data stores named in a way where I can ask out of them as a way to do... I hope. I will name my stores of data such as:

  ds7k-01 (slow disk)

  or dsSSD-01(fast disk)

  and lets say

  VMA uses datastore ds7k-01

  VMB uses datastore dsSSD-01

  I need to know how can I run my report and based on a key word in the name of the data store (key word is 7 k or SSD), and have it fill in the correct field in my report.

  
  

  is the warning, here's how I created my report... so should incorporate into this stle of script...

  the output of my report currently looks like this:

  VM, cpu, memory

  2 6 VMA

  I want it to look like this

  CPU, memory, slowdisk, VM, fastdisk

  VMA 2 6 100 0 (better yet, if it is zero, do not put a 0 in the field.)

  4 8 0 200 VMB

  snipit of the script...

  $reportedvm = "" | Select-Object VM, CPU, memory

  $reportedvm. VirtualMachineName = $vm.name

  $reportedvm. CPU = $VM. ExtensionData.Summary.config.numcpu

  $reportedvm. Memory = $vm. Extensiondata.Summary.Config.memorySizeMB

  ...

  ...

  ...

  

  Right answer

  Yep, I missed a pretty crucial part, sorry!

  Must be:

  $fastdiskGB = ($VM |) Get-hard drive | Where {$_.} {Filename-match "^ \[dsSSD"} | Measure - Object - sum - CapacityGB property). Sum

  $slowdiskGB = ($VM |) Get-hard drive | Where {$_.} {Filename-match "^ \[ds7k"} | Measure - Object - sum - CapacityGB property). Sum

• Apply the style of Pará to the xml element based on the type of master page?

  IM using a flow xml, im importing the xml to be used across different master page templates and I want to apply paragraph styles different items depending on what master page xml, they are on...

  So I have 3 put templates in place

  Type of page 1

  Type of page 2

  Type of page 3

  and 3 paragraph styles

  style 1

  style 2

  style 3

  I have the same xml structure deposited on each page...

  < Entry >

  < name > Page < / name >

  < / name >

  So, can I use javascript to apply the paragraph (style 1) style to the xml element (name) on any page that uses the master page (type of Page 1)

  Is this possible? whether and how this could be done?

  Thanks in advance

  Hello

  Try:

  #include '... / XML rules/glue code.jsx ";

  myDoc var = app.documents.item (0);

  var myRuleSet = new Array (new applyParaStyle());

  {with (MyDoc)}

  var elements = xmlElements;

  __processRuleSet (Elements.Item (0), myRuleSet);

  }

  function applyParaStyle() {}

  myIdName = "Xp".

  This.XPath = "//restaurant_name";

  This.Apply = function (myElement, myRuleProcessor) {}

  {with (MyElement)}

  {Switch(insertionPoints[0].parentTextFrames[0].) ParentPage.appliedMaster.Name)}

  case "X-Master:

  App.Select (texts);

  App.Selection [0]. FillColor = myDoc.colors.item ("xxxx");

  break;

  case 'guide-Scotland:

  App.Select (texts);

  App.Selection [0]. FillColor = myDoc.colors.item ("scotland");

  by default:

  break;

  }

  }

  Returns true;

  }

  }

• How can I make numbers align on the baseline in the lists ordered with inline images?

  When I use inline images in an ordered list, the number of each line that has an online image is offset from the base line to align with the top of the image. Here is a screenshot of preview mode (same behavior on real devices) screen:

  

  Entered on list 1 and 3 are normal. 2 and 4, entries that contain inline images, have their reference numbers lag.

  I guess the height of line gets redefined based on the image online, and then to align the numbers based on the height of the line. Is it possible to change this within the Muse for numbers sit systematically to the baseline even when the line includes an image? Is this something that needs to be addressed by modifying the style sheets?

  Hello

  You are correct in observing that embedded objects affect the height of line, which in turn affects the alignment of chips or with line numbers.

  To remedy this, you can use offsets the negative film on the inline (specifically top offset) using the Layout Panel: set the value until the line is most likely achievement at the height line.

  I hope this helps.

  Abhishek

• SQL that are based on the values of the corresponding fields.

  Hi my name is Hawk.

  I'm new to the Forum, and I wanted to just introduce myself and say hi.

  I have a daunting task to summarize values and filling in a spreadsheet with columns. I have 600 lines to go, and I was wondering if

  someone knows a way in sql to sum (a body of numbers) based on the existence of a value being the same on another field of varchar2.

  For example, here is an example of the data table that I have.

  CREATE TABLE EXAMPLE

  ("FIRSTNAME", VARCHAR2 (20 BYTE),

  VARCHAR2 (20 BYTE) "LASTNAME."

  NUMBER OF "SUMVALUE."

  NUMBER OF "ROW_ID".

  );

  Insert into SAMPLE (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) values ('Charlie', 'chocolate factory', 100, 1);

  Insert into SAMPLE values (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) ('Johnny', 'Desire', 200, 2);

  Insert into SAMPLE (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) values ('P', 'Frankenstein', 300, 3);

  Insert into SAMPLE (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) values ("Charlie", "chocolate factory", 400, 4);

  Insert into SAMPLE (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) values ("Charlie", "chocolate factory", 500, 5);

  and Yes, I have 600 lines having to ask and things to the top score on manually, it's just bs data...

  So what I do is the following.

  Write some sql that will total the number field (sumvalue) based on data with firstname = lastname = chocolate factory and Charlie.

  It seems so simple, but still I can not understand how do.

  Is that what I'm trying to make sense?  Also, I hope this is the right place to post this. I looked on this before I posted to make sure.

  Hawk.

  Hi, Hawk,

  Here's one way:

  SELECT SUM (sumvalue) AS total_sumvalue

  SAMPLE

  WHERE firstname = 'Charlie '.

  AND lastname = 'chocolate factory '.

  ;

  Welcome to the forum!

  There are those who use the forum for years and have not yet learned to post CREATES instructions TABLE and INSERT for their sample data, as you did.  Keep up the good work!

  You should also post the exact results you want from the data provided.  For example

  TOTAL_SUMVALUE

  --------------

  1000

  (this is what produces the query I posted).  As you can see, without that David and I came with 2 different interpretations of what you want and maybe aren't exactly what you need.

• Is there a way to child entities of control based on the values of list drop down Parent entity on the screen of the user interface

  Hi team,

  Need your inputs / help on the scenario below.

  I created the interested part called parent entity (created attributes stakeholder list dropdown attribute with values 'Individual' and 'Organization' and a few other attributes on this entity).

  Child entities created called 'the individual' and 'organization' and created interview screens as below.

  1 entity parent on a single screen (interested party)

  2. child entity on a single screen (the individual)

  3. the entity child another (the Organization) on another screen and created vibility rules like this and applied at the level of the screen.

  Individual information should be displayed, if

  for each all instances of the interested party , the interested party is individual

  Organization identity information should be displayed if

  for each all instances of the interested party , the Type of party's organization

  I created 2 instances. We're interested type as an "individual" and other is by "organization". But as soon as I click on the next button, it doesn't show any entity child screen because it is directly go to another screen.

  If I create instances with the same type, he has been creating the filter based on the type. Please let me know if there is any change to the rules of visibility.

  Thank you

  Viv

  I created as below and the problem is solved without the help of the functions of the entity.

  Individual information should be displayed, if

  the interested party Type = 'individual '.

  Organization identity information should be displayed if

  the party interested in Type = "organization".

  Thank you

  Vivek

• display a viewstack based on the selected item in a datagrid control

  Hello

  I am bit new to bending even though I have been using CF for a while but could do with what I hope, it's a simple answer to a simple question...

  I have a datagrid that displays a number of columns that a 'typical' I want to be able to display a viewstack child is based on the "type" selected in the data grid. I tried a number of ways that fail, annoyingly.

  the latest incarnation of the code is as follows

  part of script function

  private void dataGridChangeHandler(event:Event):void
  {
  Get the line datagrid selected item
  var Type: String = event.target.selectedIndex;
  
  Set the index of view stack
  this.pagesStack.id = Type;
  }
  
  

  <! - part datagrid - >

  < mx:DataGrid id = "EpisodeDatagrid" selectable = "true" = "true" Exchange draggableColumns = "this.dataGridChangeHandler" variableRowHeight = "true" editable = "false" height = "100%" textAlign = "center" width = "100%" > "
  < mx:columns >
  < mx:DataGridColumn id = "startdate" dataField = "EpisodeStartdate" headerText = "Start Date" labelFunction = "dateLabelFunction" headerWordWrap = "true" / >
  < mx:DataGridColumn id = "enddate" dataField = "EpisodeEnddate" headerText = "End Date" labelFunction = "dateLabelFunction" headerWordWrap = "true" / >
  < mx:DataGridColumn id = dataField 'Type' = "Episodetype" headerText = "Type" headerWordWrap = "true" / >
  < mx:DataGridColumn id = "Status" dataField = "EpisodeStatus" headerText = "Status" headerWordWrap = "true" itemRenderer = "active" / >
  
  < / mx:columns >
  
  < / mx:DataGrid >

  <!-Viewstack part->

  < mx:HBox width = '100 percent"height ="100% ">
  
  < mx:ViewStack id = "pagesStack" width = "555" height = "202" >
  
  < mx:Canvas id = "DIP" label = "DIP" >
  < mx:Panel x = "10" y = "10" width = "250" height = "200" layout = "absolute" >

  < mx:Label = "19" x = "51" text = "DIP" / >
  < / mx:Panel >
  < / mx:Canvas >
  
  < mx:Canvas id = "ERASER" label = "ERASER" width = "100 percent" height = "100%" >
  < mx:Label = "19" x = "51" text = "ERASER" / >
  < / mx:Canvas >
  
  < / mx:ViewStack >
  
  < / mx:HBox >

  help would be very appreciated (code example would be more appreciated :)

• What controls the order of the types in the list of paette type

  TS2012

  I have a bunch of custom in my file of sequence types, and when I go to the range of types and look at the types associated with my file in sequence, they are in the 'disorder' which is not very useful for me - I would have preferred that they are in a specific order which groups them according to the category of tasks they do.   Basically, I want to be able to manaully specify the order of the types.  Worse still, as I modify some types, their order and after the editing changes they get inserted somewhere else in the middle of the list (not very useful).

  The sequence that the user interface of the editor does not provide a way to 'Capture' a type and drag around manually update the order, or be able to sort the headers of columns for the type palette.  (Heck - which would be too convenient here).

  So... try to reverse this engineer and get there myself.

  There seems to be 2 different pieces of possible orders of the information for the types that I can find.

  (1) order that they exist in the file in sequence if I save it in XML format and begin reading from the top down.

  (2) the specific type typelistordernum

  I have a case where, if I open the pallet type in the sequence editor, I see

  TypeA

  TypeB

  TypeC

  Typed

  TypeE

  If I open the file in the sequence in the text editor, I see

  Typed (typelistordernum 49)

  TypeE (typelistordernum 50)

  TypeC (typelistordernum 51)

  TypeB (typelistordernum 52)

  TypeA (typelistordernum 29)

  The order in the movie file, or the order number of type list seems to dictate the order that they appear in the range of types of the sequence editor.

  I checked that each type in the example are ONLY used in this file a sequence - not shared in any other type of sequence pallets or files of type.

  If I write code to load the sequence file, obtain a reference to it, it cast to a propertyObjectFile and retrieve the TypeUsageList for this file, I get an ordered list that corresponds to the order of typelistordernum.  I can call the MoveType against this TypeUsageList method to reorder the items in the list type and save the file in the sequence.  The next time I open the file in the sequence, the tool retrieves the TypeUsageList for the file of the sequence in question and the order and numbers are the same that I saved the last time, but the order types as seen from the range of types of Sequence Editor is no different (my sorting tool did not help to this point of view).

  All the suggestions here about what is happening, and how can I do feel how the order types is displayed in the palette of type sequence editor, and what I can do to get my types of "sort" I like.

  (1) Yes, you can reorganize the types according to the type via drag and drop. At least since the 2012 version of TS this works reliably.

  (2) the typelistordernum defines the order types are displayed in the view of types.

  (3) you can sort the columns in the view types.

  Maybe you accidentally sorted one of the columns in the view of types and the sequence editor is forgetting that for what you see is actually the order sorted, based on one of the columns.

  I'm sure that drag - move is disabled when you have a sort column so this explains very well what you see. Check your headers to sort for this point of view and make sure that you do not have up and down arrows.

  Hope this helps,

  -Doug

• create a spectrum of the order from scratch (i.e. get a fft-based on the position of the same time deductions in the sample data)

  Hello people,

  THAT THE QUESTION PERTAINS TO:

  I play on 2 parameters of a system based on the sampling time: Rotary position and vibration (accelerometer g increments).  I want to take a fft based on the post to create a spectrum of the amplitude-phase speed order in / s.  To do this, perform the following:

  1 integrate (and scale) g vibration signal in the / s (SVT Integration.vi)

  2 signal sampled vibration resample the same time at an angle similarly charged signal (ma-resample unevenly sampled input (linear interpolation) .vi)

  THE QUESTION:

  Order in which operations should be carried out, integrate then resample or vice versa?  I didn't order would be important, but using the same set of data, the results are radically different.

  OR ORDER ANALYSIS 2.0 TOOLSET:

  I have the NO order Analysis Toolset 2.0, but I could not find a way to get the speed profile generation live to work with signals of position encoder DAQmx (via pxi-6602) quadrature.  In addition, it seems that I have to specify all the commands I'm interested to watch, which I don't really know at this point (I want to see all available commands) so I decided to do my own fft based on the post to get a spectrum of the order.

  Any help is greatly appreciated.

  Chris

  The order is to integrate the time domain of first - creating a speed channel.  You now have a new channel of data.  In general I would put this in the same table of waveform with waves of acceleration time.

  Then re - sample your acceleration and/or your speed signals, and then you can calculate the spectrum of the order.

• What type of e-mail accounts are NOT based on the web?

  Many web sites offer an option to contact them by e-mail. When I click on their link with them by e-mail, a box pops up saying there is no email associated with this program and I need to create an association in the default programs control panel. When I go on this Panel, it has no option to use a specific e-mail program. There is a generic option to use your current default e-mail program, but it does not work. I mainly use Yahoo as my email client, but a guy said tech web-based email will not work. What other types of e-mail work? When I had Vista and previous versions, when you went on a website and clicked on their link with them by email, you automatically had Outlook open. Now I just get the pain in the end to end box that opens as I've described before. Can someone help here? I run Windows 7 Home Premium.

  All e-mail accounts are Web-based. The difference is what allows you to get your mail. A program like Outlook or Windows Mail is an email client, and that's what looking for your error message. Yahoo's Webmail and in most cases, Webmail can be done by default. It is a solution that might work for you.
   
  How can I make Yahoo! Mail my default email application?
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html