specific App password has not created

I am trying to create a specific app password. I go to security on appleid.apple.com, I click on edit, I click on generate the password, I see a password, I copy and paste into the app, I need to and it does not work. I try to select done first then paste, it doesn't seem to work. I click on view history, and I do not see the specified password. I tried 4 times now. For each test, I received an email saying that a specific app password has been generated. Can anyone suggest what could go wrong?

This seems to just have been a temporary problem, as passwords appeared now and work.

Tags: iCloud

Similar Questions

My iPhone (and Mac) has recently started inviting me to enter my password of e-mail occasionally, even when my password has not changed.

My iPhone (and Mac) has recently started inviting me to enter my password of e-mail occasionally, even when my password has not changed. I always receive my email if I do not reintroduce. I sometimes take the message pop up on the home screen. It happens about once a week lately. I'm a little worried that so often on my iPhone. The same thing happens to my Mac too, but less frequently. I noticed that this happens for Gmail, email from work (Exchange) and iCloud, but not all other accounts. Potential virus?

Not necessarily

When the mail (especially sent) is rejected by the server - for some reason - server busy or too large attachment or even unstable connection - the first step is to ask for authentication

I would see if there is a model in terms of contacts or attachments that you can discern

iPod 4th generation 6.1.6 not accepting password not correct apple. password has not been changed

Cannot connect to iMessage or FaceTime on iPod. Able to connect to iCloud. Password has not been changed. Operated the device/off voltage. Still do not accept the password. Any suggestions?

Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings

Windows Vista Home Premium application password at startup upward. No password has been created.

Windows Vista Home Premium application password at startup upward. No password has been created. An automatic update of Windows has been installed just until the computer has been shut down.

Any suggestions on how to get around this would be appreciated.

Hello

I suggest you to follow the steps in this Microsoft KB article troubleshooting and check if it helps.

How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

http://support.Microsoft.com/kb/940765

Why Vista WMP can't play .asf files and why MS has not created a fix for this?

Why Vista WMP can't play .asf files and why MS has not created a fix for this?

Hi pdaamckechnie,

The ASF Format (Advanced Systems) is the preferred Windows Media file format. With Windows Media Player, if the appropriate codecs are installed on your computer, you can play audio content, video content, or both, that is compressed with a wide variety of codecs and that is stored in an .asf file.

You can check the link below for more information on the types of media files that supports Windows Media Player
Information on the types of media files that supports Windows Media Player
http://support.Microsoft.com/kb/316992

See the link below for more information on codecs.
Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

Please post back and let us know if it helped to solve your problem.

Kind regards
KarthiK TP

Journal has not created

Hello
I have a file of installation command:
@rem *************************************************************************
@rem This script is used for the installation of WebLogic Server as a Windows Service.
@rem
@rem to create your own script start for your domain, just put the
name of the @rem to your server SERVER_NAME variable, then call this script from your
@rem directory of the domain.
@rem
@rem This script sets the following variables before installing
@rem WebLogic Server as a Windows Service:
@rem
@rem WL_HOME - the root directory of your WebLogic installation
@rem JAVA_HOME - location of the version of Java used to start WebLogic
@rem server. This variable should point to the root of a directory
installation of JDK @rem and will be set by the installer for you.
@rem, see Oracle Fusion Middleware System Configurations supported
@rem (http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html)
@rem for an updated list of virtual machines supported taken Java.
@rem PATH - adds the JDK and directories WebLogic to the system path.
@rem CLASSPATH - adds the JDK and WebLogic jars to the classpath.
@rem
@rem other variables that takes of the installSvc are:
@rem
@rem WLS_USER - username admin for starting the server
@rem WLS_PW - password in clear text to the server startup
@rem ADMIN_URL - if this variable is set, the server has started will be a
@rem managed server and will turn to the url (i.e.
@rem http://localhost:7001 ) as the server admin.
@rem PRODUCTION_MODE - true for servers in production mode, false for
@rem development
@rem JAVA_OPTIONS - Java command line options for the server. (These
@rem will be marked at the end of the JAVA_VM and MEM_ARGS)
JAVA_VM - java arg @rem specifying the virtual machine to run. (i.e. - Server)
@rem-client, etc.)
@rem MEM_ARGS - variable to override the standard memory arguments
@rem to java
@rem
@rem
@rem MAX_CONNECT_RETRIES - number of attempts to make the Windows Service will check
@rem if you start the Weblogic Server. If this variable
@rem is specified with the HOST and PORT, the Windows Service will be
@rem wait for the Weblogic Server is started.
@rem HOST - the IP address of the Weblogic Server
@rem PORT - where the WebLogic Server is listening to Port number requests
@rem
jDriver for Oracle users @rem: this script assumes that native libraries
@rem required for jDriver for Oracle have been installed in the right
@rem location and that your system path variable has been set correctly.
@rem
@rem for more information, see "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@rem (@DOCSWEBROOT/START/overview.htm).
@rem *************************************************************************
off @echo
SETLOCAL
@rem check if SERVER_NAME is defined
: check_server_name
If not set (SERVER_NAME
@echo you need set before SERVER_NAME
@echo installation of WebLogic Server as a Windows Service
output/b 1
)
@rem check if DOMAIN_NAME is set
: check_domain_name
If not set (domain_name
@echo you need set before domain_name
@echo installation of WebLogic Server as a Windows Service
output/b 1
)
@rem check if USERDOMAIN_NAME is set to
: check_userdomain_home
If not set (USERDOMAIN_HOME)
@echo you must set before USERDOMAIN_HOME
@echo installation of WebLogic Server as a Windows Service
output/b 1
)
@rem check if SERVICE_DESCRIPTION has the value
: check_server_name
If not set (SERVICE_DESCRIPTION)
Set SERVICE_DESCRIPTION = "WebLogicServer.
)

Set WL_HOME = C:\Oracle\Middleware\Oracle_Home\wlserver
Call "% WL_HOME%\common\bin\commEnv.cmd".
@rem check that the WebLogic classes are where we expect they are
: checkWLS
If exist checkJava goto '% WL_HOME%\server\lib\weblogic.jar '.
ECHO the WebLogic Server not found in the directory % WL_HOME%\server.
ECHO Please edit your script so that the variable WL_HOME points
echo to the WebLogic installation directory.
end goto
@rem check that java is where we expect it to be
: checkJava
If exist runWebLogic goto '% JAVA_HOME%\bin\java.exe '.
echo the JDK was found in the directory % JAVA_HOME %.
ECHO Please edit your script so that the variable JAVA_HOME
echo points to the location of your JDK.
end goto
: runWebLogic
@rem the service load dll file, so the JAVA_VM * must * be correct
If exist (%JRE_HOME%\bin\client)
Set JAVA_VM =-customer
) ElseIf exist (%JRE_HOME%\bin\server)
Set JAVA_VM =-Server
) ElseIf exist (%JRE_HOME%\bin\jrockit)
Set JAVA_VM =-jrockit
)
: noResetJavaVM
If not "MEM_ARGS %" == "" goto noResetMemArgs
MEM_ARGS =-Xms32m-Xmx200m set
: noResetMemArgs
@echo we
set the classpath = % WEBLOGIC_CLASSPATH %; CLASSPATH %
@echo ***************************************************
@echo * to start WebLogic Server, use the password *.
@echo * assigned the user to the system. The system *.
@echo * username and password must also be used for *.
@echo * access the WebLogic Server console from a web *.
@echo * browser. *
@echo ***************************************************
REM * define the command-line for the service runs in created FMV
off @echo
If "% ADMIN_URL" == "" goto runAdmin
@echo we
CMDLINE = value "%%%d MEM_ARGS JAVA_VM % JAVA_OPTIONS %-classpath \"%CLASSPATH%\ " »-Dweblogic.name=%server_name%-Dweblogic.Management.username=%WLS_USER% - Dweblogic.management.server=\"%ADMIN_URL%\ '- Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE%-Dweblogic. Stdout=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stdout.log
-Dweblogic.stderr=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stderr.log
-Djava.Security.policy=\"%WL_HOME%\server\lib\weblogic.Policy\"weblogic. Server '.
end goto
: runAdmin
@echo we
CMDLINE value = "% JAVA_VM % MEM_ARGS % JAVA_OPTIONS %-classpath \"%CLASSPATH%\ " ' - Dweblogic.Name=%SERVER_NAME%-Dweblogic.management.username=%WLS_USER%-Dweblogic. ProductionModeEnabled = % PRODUCTION_MODE % Dweblogic. Stdout=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stdoutA.log
-Dweblogic.stderr=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stderrA.log
-Djava.Security.policy=\"%WL_HOME%\server\lib\weblogic.Policy\"weblogic. Server '.
: complete
REM * implemented extrapath for win32 and win64 platform separately
Set WLSVC_EXE_TO_USE = wlsvcx64
If '% WL_USE_X86DLL' is 'true')
Set EXTRAPATH=%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\32\oci920_8
Set WLSVC_EXE_TO_USE = wlsvc
)
If '% WL_USE_IA64DLL' is 'true')
Set EXTRAPATH=%WL_HOME%\server\native\win\64\;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\64\oci920_8
Set WLSVC_EXE_TO_USE = wlsvc64
)
If '% WL_USE_AMD64DLL' is 'true')
Set EXTRAPATH=%WL_HOME%\server\native\win\x64\;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\x64\oci920_8
Set WLSVC_EXE_TO_USE = wlsvcx64
)
REM * install service
'% WL_HOME%\server\bin\%WLSVC_EXE_TO_USE%' - install - ServiceName: 'wlsvc domain_name % _ % SERVER_NAME %' - delay: 120000 - svcdescription: '% SERVICE_DESCRIPTION' - javahome: 'JAVA_HOME %' - execdir: '% USERDOMAIN_HOME' - maxconnectretries: '% MAX_CONNECT_RETRIES' - host: "%" HOST - port: '%port%' - extrapath: "% EXTRAPATH" - password: "% WLS_PW" - cmdline: CMDLINE %
ENDLOCAL
======================================================================================================================================================
Then I run the service with the command of the launcher file, but the journal of stdou.log and stderr.log files are not created...
echo off
SETLOCAL
Set DomainName = base_domain
Set USERDOMAIN_HOME = C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain
Define SERVER_NAME = SOPSECURITY1
Set PRODUCTION_MODE = true
Set JAVA_OPTIONS=-Dweblogic.Stdout="c:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain\stdout.txt»-Dweblogic.Stderr="c:\Oracle\Middleware\Oracle Home\user_projects\domains\base_domain\stderr.txt.
set ADMIN_URL = https://AdminServer:7002
MEM_ARGS =-Xms40m-Xmx250m set
call "C:\Oracle\Middleware\Oracle_Home\wlserver\server\bin\installSvc.cmd".
ENDLOCAL
Any idea?
Thank you
DOM
======================================================================================================================================================

Path includes the space:-Dweblogic. Stderr = "c:\Oracle\Middleware\Oracle Home\user_projects\domains\base_domain\stderr.txt"

The ADMIN user has not created in my Apex 4.1 installation
No matter how many times I run apxchpwd.sql, I can't my admin login page to tell me anything except "Invalid credentials." When I checked APEX_040100.wwv_flow_fnd_user, I found that the table was empty. There is no line for ADMIN at all, so there is nothing to apxchpwd.sql update. What can I do to add the user? I use HTTP Server and modplsql, not Apex listener. Thank you.
Near the top of your Setup log file is show "Procedure with a new installation." or "Do an upgrade installation."?

If it is an upgrade installation, it does not create the ADMIN user. Maybe delete all versions of the TOP before installing the new version, as a previous version was perhaps not setup correctly.

Computer locked out, says incorrect password, has not changed the password.

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas: computer locked out, says incorrect password, haven't changed the password.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
These things don't happen by themselves. Once you're in the system, do a thorough analysis of the malware.

http://www.elephantboycomputers.com/page2.html#Removing_Malware

You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

NET user administrator / Active: Yes [press Enter]
NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

[Note: do not enter the brackets!]

Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

Start Orb > Search box > type: cmd
When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

NET user administrator / active: No. [Enter]

Exit the command prompt.

General recommendations for creating users in Vista:

You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

Start Orb > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UAC

Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

MS - MVP - Elephant Boy computers - don't panic!

Sierra already installed but App Store has not installed

I installed Sierra a few days ago and I use it. But I found that in the App store page, Sierra still shows message 'Download', as if she is not yet installed. I thought that maybe there is an update, so I installed it again, but he was always showing message "Download" on the icon of the Sierra in the App store, and I can't find the Sierra in "Purchased" page

If it's a minor issue to me because everything is going well except this weird situation, I still want to know if there is something wrong with my system, I have remove some files with Daisy Disc this afternoon.

I hope that I didn't remove all the important system files...

Nothing wrong with your system, mine shows as well download.

Starting yesterday morning I stopped being able to receive emails from my verizon account. All my settings are correct and my password has not changed.

I get the error message "could not or clear read chrome ' queue: / / / C:/Program % program 20Files % 20 (x 86) /Mozilla%20Thunderbird/chrome.manifest. Nothing has changed with my email account and I can see the messages if I go to Verizon webmail so that messages are sent and received through Verizon. I just can't get their thanks to Mozilla. Whenever he asks new messages I get the same last message he could read. How can I fix it?

Thank you
```
 Susan
```
Since the original (somehow) problem has been resolved, can mark the thread as "solved" Please?
Thank you.

Shortcuts in the desktop or the Start Menu has not created

Hello

We use vWorkspace 7.2. and AppPortal for access applications on 2003 TS in transparent window mode. All published applications are accessible from the thick client or VDI computers. When I assign an application to vWorkspace folder, the icon appears correctly in AppPortal. Problem starts when I attribute the same request to "Remote Desktop files", in this case no entries are created, nor to the desktop or the Start Menu or any other option. When I change AppPortal to work in integrated desktop mode all entries are properly created.

There are already a ticket about this Quest (CaseID:887952) support. After many hours of phone calls from the Technical Department explained what I need is available only when all of the TS Office are published. I find it hard to believe that I did the same thing easily with other 3rd party broker connection software. What is your experience, do you have "Remote Desktop Folder" work without providing complete desktop TS?

Best regards

Adrian Tonina

Adrian,

AppPortal is designed to run on your client computer of the end user and is able to show the shortcuts in the user interface or on the desktop of the client operating in desktop integrate mode (DI). When running in mode of DI, only applications that are designated for the integration of office will have shortcuts created on the client for desktop/menu start. You can specify in the properties of a managed application, Desktop Integration step. Note that only applications that are assigned to the Connector vWorkspace records will be created through AppPortal.

Applications that are assigned to the Standard and customized remote office records are created through our configuration of the Shell (pnshell) module, and their shortcuts are created on the remote (TS or VDI) desktop computers. If configured properly, you will see them on the entire desktop of the remote session.

-Adam

Integration of BBM to update status when the user has not created BBM

Hello

We have integrated the update of the status of BBM in our application.

When the user opens the application they are requested permission to allow the application to access the BBM.

Then, there is an alert message which says that BBM implemented is necessary to connect to the app with options to cancel or continue.

If a user cancels out of the aler, they can always proceed through the app, but when they get to the point where they can hit a link to update their status, that nothing is happening.

I want to know how to do is that if somebody hits cancel rather than implementation of surveys BBM can we set a flag to hide the update status BBM feature?

Seems a bit odd to require someone to set up BBM but let them still cancel and run the application. Aware that this should be handled but don't know where to do

BBM must be installed before an application can complete the BBM registration process. If they cancelled out of this process, you will get a value of successful registration. You must activate the features BBM of your application after a successful registration.

We still allow the user to run the application, because they may not want to configure BBM, but continue to use the application.

Additions of mass has not created

Hello

I'm having a problem now as one of our user facing problem while creating massive additions
Here are the logs:

Payables: Version : 12.0.0

Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.

APMACR module: Mass Additions Create
+---------------------------------------------------------------------------+

Current system time is 10-APR-2012 10:03:02

+---------------------------------------------------------------------------+

**Starts**10-APR-2012 10:03:05
**Ends**10-APR-2012 10:03:48
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+


+---------------------------------------------------------------------------+
Executing request completion options...

Output file size: 
0

+------------- 1) PRINT   -------------+
Disabling requested Output Post Processing.  Nothing to process.  The output of the request is zero byte.
+--------------------------------------+


Finished executing request completion options.

+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 10-APR-2012 10:03:49

the user declares that all the procedures have been followed to create massive additions but it failed with the error above
does anyone know how to fix it?

THX

Salvation;

Please check below which could be useful for your question:

Troubleshooting Guide for massive additions creates [ID 133597.1]

Respect of
HELIOS

Do not compile... Its taking too long... Package has not created...

Hello

I ran the code below... But it's not not compiling... Compile time is too long... I used Toad like sqlplus.

FUNCTION comparison_schtype(
p_flag          IN VARCHAR2 DEFAULT ' ',
p_amc_code      IN VARCHAR2 DEFAULT ' ',
p_schtype       IN VARCHAR2 DEFAULT ' ',
p_location      IN VARCHAR2 DEFAULT ' ',
p_month         IN VARCHAR2 DEFAULT ' ',
p_scheme        IN VARCHAR2 DEFAULT ' ',
p_distributor   IN VARCHAR2 DEFAULT ' ',
p_invsegment    IN VARCHAR2 DEFAULT ' ')
RETURN mfdex_tt_sch_c_schtype PIPELINED AS
query_result    q_result.query_res;
dw_query_result    q_result.query_res;

BEGIN

 v_max_month := mfdex_utilities_pkg.get_max_month(p_amc_code);

 if p_location <> ' ' then
  v_location := chr(39)||p_location||chr(39);
 else
   v_location := p_location ;
 end if;

 if p_month <> ' ' then
  v_month := p_month;
 else
   v_month :=v_max_month ;
 END IF;

    IF UPPER(p_amc_code) <> 'ALL' THEN

        PLP_MFDEX_SELECT(
              p_flag,
              chr(39)||p_amc_code||chr(39),
              v_location,              p_invsegment,              v_max_month,              p_schtype,
              p_scheme,              p_distributor,              ' ',              ' ',
              'SCHEME_TYPE',              query_result);

      ELSE

        PLP_MFDEX_SELECT(
              p_flag,              ' ',              v_location,              p_invsegment,
              v_max_month,              p_schtype,              p_scheme,              p_distributor,
              ' ',              ' ',              'SCHEME_TYPE',              query_result);
      END IF;
      
     -- PLP_MFDEX_SELECT(
            --  p_flag,              ' ',              v_location,              p_invsegment,
            --  v_max_month,              p_schtype,              p_scheme,              p_distributor,
            --  ' ',              ' ',              'SCHEME_TYPE',              dw_query_result);

       LOOP
           FETCH query_result
            INTO   schtype,        clgassets,       sales,        red,
                   trxns,           folios,          netswitch,    divreinv,
                   avgage,          avgassets,       siti_amt,     soto_amt,
                   newsip,          totalsip,        sipaverage,   sipfailed,
                   sipceased,      sipaum;
                   
        PLP_MFDEX_SELECT(
              p_flag,              ' ',              location,              p_invsegment,
              v_max_month,              p_schtype,              p_scheme,              p_distributor,
              ' ',              ' ',              'SCHEME_TYPE',              dw_query_result);
        LOOP
           FETCH dw_query_result
            INTO   schtype,        dw_clgassets,       dw_sales,        dw_red,
                   dw_trxns,           dw_folios,          dw_netswitch,    dw_divreinv,
                   dw_avgage,          dw_avgassets,       dw_siti_amt,     dw_soto_amt,
                   dw_newsip,          dw_totalsip,        dw_sipaverage,   dw_sipfailed,
                   dw_sipceased,      dw_sipaum;

         END LOOP;
              EXIT WHEN query_result%NOTFOUND;
             sum_clgassets          := sum_clgassets + clgassets;
                sum_sales              := sum_sales + sales;
                sum_red                := sum_red + red;
                sum_trxns              := sum_trxns + trxns;
                sum_folios             := sum_folios + folios;
                sum_netswitch          := sum_netswitch + netswitch;
                sum_divreinv           := sum_divreinv + divreinv;
                sum_avgage             := sum_avgage +  avgage;
                sum_avgassets          := sum_avgassets + avgassets;
                sum_siti_amt           := sum_siti_amt + siti_amt;
                sum_soto_amt           := sum_soto_amt + soto_amt;
                sum_newsip             := sum_newsip + newsip ;
                sum_totalsip           := sum_totalsip + totalsip ;
                sum_sipaverage         := sum_sipaverage + sipaverage;
                sum_sipsfailed         := sum_sipsfailed + sipfailed;
                sum_sipsceased         := sum_sipsceased + sipceased;
                sum_sipaum             := sum_sipaum + sipaum;

                sum_dw_clgassets          := sum_dw_clgassets + dw_clgassets;
                sum_dw_sales              := sum_dw_sales + dw_sales;
                sum_dw_red                := sum_dw_red + dw_red;
                sum_dw_trxns              := sum_dw_trxns + dw_trxns;
                sum_dw_folios             := sum_dw_folios + dw_folios;
                sum_dw_netswitch          := sum_dw_netswitch + dw_netswitch;
                sum_dw_divreinv           := sum_dw_divreinv + dw_divreinv;
                sum_dw_avgage             := sum_dw_avgage + dw_avgage;
                sum_dw_avgassets          := sum_dw_avgassets + dw_avgassets;
                sum_dw_siti_amt           := sum_dw_siti_amt + dw_siti_amt;
                sum_dw_soto_amt           := sum_dw_soto_amt + dw_soto_amt;
                sum_dw_newsip             := sum_dw_newsip + dw_newsip ;
                sum_dw_totalsip           := sum_dw_totalsip + dw_totalsip ;
                sum_dw_sipaverage         := sum_dw_sipaverage + dw_sipaverage;
                sum_dw_sipsfailed         := sum_dw_sipsfailed + dw_sipfailed;
                sum_dw_sipsceased         := sum_dw_sipsceased + dw_sipceased;
                sum_dw_sipaum             := sum_dw_sipaum + dw_sipaum;
                
      CASE WHEN dw_clgassets = 0 THEN tot_clgassets := 0; ELSE tot_clgassets:=ROUND(clgassets/dw_clgassets*100); END CASE;
      CASE WHEN dw_sales = 0 THEN tot_sales := 0; ELSE tot_sales:=ROUND(sales/dw_sales*100); END CASE;
      CASE WHEN dw_red = 0 THEN tot_red := 0; ELSE tot_red:=ROUND(red/dw_red*100); END CASE;
      CASE WHEN dw_trxns = 0 THEN tot_trxns := 0; ELSE tot_trxns:=ROUND(trxns/dw_trxns*100); END CASE;
      CASE WHEN dw_folios = 0 THEN tot_folios := 0; ELSE tot_folios:=ROUND(folios/dw_folios*100); END CASE;
      CASE WHEN dw_netswitch = 0 THEN tot_netswitch := 0; ELSE tot_netswitch:=ROUND(netswitch/dw_netswitch*100); END CASE;
      CASE WHEN dw_divreinv = 0 THEN tot_divreinv := 0; ELSE tot_divreinv:=ROUND(divreinv/dw_divreinv*100); END CASE;
      CASE WHEN dw_avgage = 0 THEN tot_avgage := 0; ELSE tot_avgage:=ROUND(avgage/dw_avgage*100); END CASE;
      CASE WHEN dw_avgassets = 0 THEN tot_avgassets := 0; ELSE tot_avgassets:=ROUND(avgassets/dw_avgassets*100); END CASE;
      CASE WHEN dw_siti_amt = 0 THEN tot_siti_amt := 0; ELSE tot_siti_amt:=ROUND(siti_amt/dw_siti_amt*100); END CASE;
      CASE WHEN dw_soto_amt = 0 THEN tot_soto_amt := 0; ELSE tot_soto_amt:=ROUND(soto_amt/dw_soto_amt*100); END CASE;
      CASE WHEN dw_newsip = 0 THEN tot_newsip := 0; ELSE tot_newsip:=ROUND(newsip/dw_newsip*100); END CASE;
      CASE WHEN dw_totalsip = 0 THEN tot_totalsip := 0; ELSE tot_totalsip:=ROUND(totalsip/dw_totalsip*100); END CASE;
      CASE WHEN dw_sipaverage = 0 THEN tot_sipaverage := 0; ELSE tot_sipaverage:=ROUND(sipaverage/dw_sipaverage*100); END CASE;
      CASE WHEN dw_sipfailed = 0 THEN tot_sipfailed := 0; ELSE tot_sipfailed:=ROUND(sipfailed/dw_sipfailed*100); END CASE;
      CASE WHEN dw_sipceased = 0 THEN tot_sipceased := 0; ELSE tot_sipceased:=ROUND(sipceased/dw_sipceased*100); END CASE;
      CASE WHEN dw_sipaum = 0 THEN tot_sipaum := 0; ELSE tot_sipaum:=ROUND(sipaum/dw_sipaum*100); END CASE;

          PIPE ROW(mfdex_rt_sch_c_schtype (schtype,
            '<a href=f?p='||NV('APP_ID')||':141:'||V('APP_SESSION')||'::NO:RP,141,CIR:p_location,p_month,p_schtype,p_scheme,p_distributor,p_invsegment:'||REPLACE(p_location,' ','%20')||'%2C'||REPLACE(p_month,' ','%20')||'%2C'||REPLACE(schtype,' ','%20')||'%2C'||REPLACE(p_scheme,' ','%20')||'%2C'||REPLACE(p_distributor,' ','%20')||'%2C'||REPLACE(p_invsegment,' ','%20')||''||'>All</a>',
            '<a href=f?p='||NV('APP_ID')||':142:'||V('APP_SESSION')||'::NO:RP,142,CIR:p_location,p_month,p_schtype,p_scheme,p_distributor,p_invsegment:'||REPLACE(p_location,' ','%20')||'%2C'||REPLACE(p_month,' ','%20')||'%2C'||REPLACE(schtype,' ','%20')||'%2C'||REPLACE(p_scheme,' ','%20')||'%2C'||REPLACE(p_distributor,' ','%20')||'%2C'||REPLACE(p_invsegment,' ','%20')||''||'>All</a>',
            '<a href=f?p='||NV('APP_ID')||':143:'||V('APP_SESSION')||'::NO:RP,143,CIR:p_location,p_month,p_schtype,p_scheme,p_distributor,p_invsegment:'||REPLACE(p_location,' ','%20')||'%2C'||REPLACE(p_month,' ','%20')||'%2C'||REPLACE(schtype,' ','%20')||'%2C'||REPLACE(p_scheme,' ','%20')||'%2C'||REPLACE(p_distributor,' ','%20')||'%2C'||REPLACE(p_invsegment,' ','%20')||''||'>All</a>',
            '<a href=f?p='||NV('APP_ID')||':144:'||V('APP_SESSION')||'::NO:RP,144,CIR:p_location,p_month,p_schtype,p_scheme,p_distributor,p_invsegment:'||REPLACE(p_location,' ','%20')||'%2C'||REPLACE(p_month,' ','%20')||'%2C'||REPLACE(schtype,' ','%20')||'%2C'||REPLACE(p_scheme,' ','%20')||'%2C'||REPLACE(p_distributor,' ','%20')||'%2C'||REPLACE(p_invsegment,' ','%20')||''||'>All</a>',
            '<a href=f?p='||NV('APP_ID')||':145:'||V('APP_SESSION')||'::NO:RP,145,CIR:p_location,p_month,p_schtype,p_scheme,p_distributor,p_invsegment:'||REPLACE(p_location,' ','%20')||'%2C'||REPLACE(p_month,' ','%20')||'%2C'||REPLACE(schtype,' ','%20')||'%2C'||REPLACE(p_scheme,' ','%20')||'%2C'||REPLACE(p_distributor,' ','%20')||'%2C'||REPLACE(p_invsegment,' ','%20')||''||'>All</a>',
             tot_clgassets,clgassets,dw_clgassets,
             tot_sales,sales,dw_sales,
             tot_red,red,dw_red,
             tot_trxns,trxns,dw_trxns,
             tot_folios,folios,dw_folios,
             tot_netswitch,netswitch,dw_netswitch,
             tot_divreinv,divreinv,dw_divreinv,
             tot_avgage,avgage,dw_avgage,
             tot_avgassets,avgassets,dw_avgassets,
             tot_siti_amt,siti_amt,dw_siti_amt,
             tot_soto_amt,soto_amt,dw_soto_amt,
             tot_newsip,newsip,dw_newsip,
             tot_totalsip,totalsip,dw_totalsip,
             tot_sipaverage,sipaverage,dw_sipaverage,
             tot_sipfailed,sipfailed,dw_sipfailed,
             tot_sipceased,sipceased,dw_sipceased,
             tot_sipaum,sipaum,dw_sipaum));

           END LOOP;
   
              l_string :=
            'Grand Total;ClgAssetsT='
         || TO_CHAR ( (sum_clgassets), '999G999G999G999G990')
         || ';ClgAssetsA='
         || TO_CHAR ( (sum_dw_clgassets), '999G999G999G999G990')
         || ';
                             SalesT='
         || TO_CHAR ( (sum_sales), '999G999G999G999G990')
         || ';SalesA='
         || TO_CHAR ( (sum_dw_sales), '999G999G999G999G990')
         || ';
                             RedT='
         || TO_CHAR ( (sum_red), '999G999G999G999G990')
         || ';RedA='
         || TO_CHAR ( (sum_dw_red), '999G999G999G999G990')
         || ';
                             TrxnsT='
         || TO_CHAR ( (sum_trxns), '999G999G999G999G990')
         || ';TrxnsA='
         || TO_CHAR ( (sum_dw_trxns), '999G999G999G999G990')
         || ';
                             FoliosT='
         || TO_CHAR (ROUND (sum_folios), '999G999G999G999G990')
         || ';FoliosA='
         || TO_CHAR (ROUND (sum_dw_folios), '999G999G999G999G990')
         || ';
                             NetSwitchT='
         || TO_CHAR (ROUND (sum_netswitch), '999G999G999G999G990')
         || ';NetSwitchA='
         || TO_CHAR (ROUND (sum_dw_netswitch), '999G999G999G999G990')
         || ';
                             DivReinvT='
         || TO_CHAR (ROUND (sum_divreinv), '999G999G999G999G990')
         || ';DivReinvA='
         || TO_CHAR (ROUND (sum_dw_divreinv), '999G999G999G999G990')
         || ';
                             AvgAgeT=-;AvgAgeA=-;
                             AvgAssetsT='
         || TO_CHAR (ROUND (sum_avgassets), '999G999G999G999G990')
         || ';AvgAssetsA='
         || TO_CHAR (ROUND (sum_dw_avgassets), '999G999G999G999G990')
         || ';
                             SITI AmtT='
         || TO_CHAR (ROUND (sum_siti_amt), '999G999G999G999G990')
         || ';SITI AmtA='
         || TO_CHAR (ROUND (sum_dw_siti_amt), '999G999G999G999G990')
         || ';
                             SOTO AmtT='
         || TO_CHAR (ROUND (sum_soto_amt), '999G999G999G999G990')
         || ';SOTO AmtA='
         || TO_CHAR (ROUND (sum_dw_soto_amt), '999G999G999G999G990')
         || ';
                             NewSIPT='
         || TO_CHAR (ROUND (sum_newsip), '999G999G999G999G990')
         || ';NewSIPA='
         || TO_CHAR (ROUND (sum_dw_newsip), '999G999G999G999G990')
         || ';
                             TotalSIPT='
         || TO_CHAR (ROUND (sum_totalsip), '999G999G999G999G990')
         || ';TotalSIPA='
         || TO_CHAR (ROUND (sum_dw_totalsip), '999G999G999G999G990')
         || ';
                             SIPAverageT='
         || TO_CHAR (ROUND (sum_sipaverage), '999G999G999G999G990')
         || ';SIPAverageA='
         || TO_CHAR (ROUND (sum_dw_sipaverage), '999G999G999G999G990')
         || ';
                             SIPFailedT='
         || TO_CHAR (ROUND (sum_sipsfailed), '999G999G999G999G990')
         || ';SIPFailedA='
         || TO_CHAR (ROUND (sum_dw_sipsfailed), '999G999G999G999G990')
         || ';
                             SIPCeasedT='
         || TO_CHAR (ROUND (sum_sipsceased), '999G999G999G999G990')
         || ';SIPCeasedA='
         || TO_CHAR (ROUND (sum_dw_sipsceased), '999G999G999G999G990')
         || ';
                             SIPAuMT='
         || TO_CHAR (ROUND (sum_sipaum), '999G999G999G999G990')
         || ';SIPAuMA='
         || TO_CHAR (ROUND (sum_dw_sipaum), '999G999G999G999G990')
         || ';';

      IF query_result%ISOPEN THEN
CLOSE query_result;
END IF;

IF dw_query_result%ISOPEN THEN
CLOSE dw_query_result;
END IF;
return;
exception
when others then
htp.p('Error: '||sqlerrm);

END comparison_schtype;

Please, someone let me know how to solve this problem...

Thank you

Jaya...

Published by: JayaShan on April 6, 2010 10:34

Hello

Visit ask Tom-Ora-04021 and look

SELECT sid||','||serial# username,
 2         status,
 3         MODULE,
 4         osuser,
 5         client_info,
 6         TO_CHAR(logon_time,'DD-MON-YY HH:MI:SSSS') loged_on
 7  FROM v$session

* 009 *.

Apps for password has expired within the period of grace and FNDCPASS does not

Apps password has expired within the period of grace and FNDCPASS to help when we try to change the password it gives an error, but the account_status for user apps is still EXPIRED (GRACE). I should also mention that the account_status from APPLYSYS is open.
Back-end, I am able to connect to applications using the old password. This new password doesn't think in the database.
Please really apprepriate any help...
Concerning

So finally we internally researched and found the solution for the question below.

(1) we changed the following values at the time UNLIMITED.

PASSWORD_GRACE_TIME

PASSWORD_LIFE_TIME

(2) we took the backup of FND_USER and FND_ORACLE_USERID.

change user apps identified by ;

(3) then tried FNDCPASS so he changed the apps

FNDCPASS apps / 0 system / SYSTEM APPLSYS

(4) run on the database and Application Tier autoconfig.

Change the settings of password to its original values.

Start the application services and active user request execution to verify everything works well.

First, we tested the action plan on our test instance. then we updated the plan of action preceding the SR. We go come from Oracle's Support.

After the execution of the plan of action preceding our number got solved...

I share the solution so it can help others...

Thanks a lot for the help and time.

specific App password has not created

Similar Questions

Maybe you are looking for