East - what to expect two WRE54G range extensions I have installed?

I bought a WRE54G Range Extender for home use with a router WRT54G home. My laptop and iPhone had low signal strength in the room at the other end of the House of the router. I put everything in place, it seemed to work ok, so I bought another to do the same thing at work.

Now that I've had a couple of weeks, trying to use the bar end of range with several iPhone and several laptops, including 3 hours on the phone with Linksys support (level 2) yesterday, I'm disappointed by my results. I have the same problem on two systems on both devices, configured to the Linksys and the routers wireless of Fortinet. Here's what I mean.

If I start a laptop or an iPhone to range of the router, I join the network very well. So if I wear the device closer to the Range Extender, the signal becomes stronger after a minute or two, and my problem is solved. But then the device loses the signal from the network at the end of 3 to 10 minutes, she resumed, but now I do not get an IP address, so I can't do anything. The only way to get back on the network must carry the device to the router, reconnect, and then carry the rear of the unit until close to the Range Extender. Home Range Extender is now about 25 feet from the router. At the office, it is about 70 feet away.

On one of my laptops at home, if the laptop is connected via wi - fi with the average signal strength, when I turn on the range extender, after a few seconds the laptop stands wi - fi altogether. Then it shows that it is connected but doesn't 0.0.0.0 for the IP 169.x.x.x. usually the only way to get this laptop at work is to turn off the Range Extender.

On my iPhone, I have a wireless diagnostic application. From there, I can see all the wi - fi signals, a couple of weak force those neighbors. I have my network on a channel not used. The router and the range extender are defined with the same string, security settings. They both come with the same name.

I would be able to connect to the Range Extender instead of having to connect to the router first, and then switch to the Range Extender? Is it normal to keep losing signal every 3-10 minutes? I've never had any of this wrong with the router, only with the Range Extender.

Maybe that I need another device and the Range Extender is not supposed to do what I'm trying to do. Someone at - he had experiences or ideas to share?

As a last step, I have updated the drivers for the card wireless on my laptop. Now everything works fine.

Tags: Linksys Routers

Similar Questions

  • My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed.

    My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.

    It is possible that there is a problem with the files that store the registry extensions.

    Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

    New files will be created if necessary.

    See "extension corrupted files:

  • What extensions I have installed?

    How can I see which extensions I've installed on my Firefox

    Type of topic: addons< enter > in the address bar to open your add-ons Manager.
    Access key; < Control >(Mac: < command >)< shift > has)

    In the Manager of Add-ons, on the left, select Extensions to see the
    modules you have installed. In addition, select Plugins to see what other programs
    computer linked to Firefox.

  • Howw can I use extensions I have installed as the admin for a standard user account? When I go on my Add ons under the standard user, no script is not an option. Thank you

    Hi, I'm using Vista and Firefox 3.6. I installed some popular addons such as no script and the web page of the trust for the admin account, but when I connect under the standard account with fewer rights, I do not have them available. The only way I can get to run is to right click and run as administrator which defeats the purpose to log on as a standard user. Thanks for any help you can provide.

    See:

  • What are the two icons to the left of the indicator in the mac mail (arrows and circle)?

    What are the two icons next to the flag in the mail from mac (arrows and circle)?

    I can't understand what they're doing. Thanks for any help!

    If you are referring to the registration of the preview, the arrows appear when you Replied (curved) or transferred (right arrow) by e-mail.

    The circle, when rempli filled in blue, indicates you have not yet opened / read the email.

  • Tecra S11 - what are the two primary partitions for?

    Hello everyone

    I just got myself a new Tecra S11 with Win7 64 and there is one thing that has me littlebit wondered.
    In total, there are four partitions, there are for sure the recovery a (1.46 GB) and the system a (256,38 GB), but then there are also two primary partitions (8.86 and 31.38 GB) without displayed use or file system. There is no unallocated space.

    Can someone tell me what are these two partitions? I want to split the system partition to store my data on a separate, if possible I also want to use that 'unknown' space then ;)

    Besides that: don't worry, I already have recovery DVD.

    Greetings
    Nico

    I put t know why you now have the new structure of the partitions, but the important thing is that you create recovery DVDs and if something goes wrong with the preinstalled recovery image OS or HARD drive you can use DVDs for the installation of the OS.

  • Satellite L500 - what to expect from the battery?

    I just brought a laptop Satellite L500/20. Can someone tell me what to expect of the battery?

    I turn on the laptop and the battery will be charged 100%. Basically, as soon as the laptop is turned on, it seems to drain the battery at a rate of 1% every 1 minute. Is this normal? At this rate, my battery died a few hours 1 and a half. I don't watch videos, listen to music or download large files.

    I use it mostly just for e-mails, must the battery completely drain it quickly?

    Hello

    I think it all depends on the battery type (e. g. 9 cells) and what you do with the laptop. For example I have Satellite L300 with Windows XP and I can work 2 hours maximum battery and this means that only surf the Internet without watch videos and the lower display brightness.

    According to the battery but I think that 1 hour and 30 minutes are ok on Vista or Windows 7 If you have a superior brightness of the screen.

    By the way: on the Toshiba site I found some interesting tips of the battery:
    http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

  • So, what are these two arrows that appear on some files, such as page files in the Finder?

    So, what are these two arrows that appear on some files, such as page files in the Finder?  I kinda afraid to hit one of them for fear that they're going to mess with the file.

    Could you post a screen so that we know what you're talking about!

  • Can someone tell me what are these two programs and what they're doing, Microsoft Visual C++ Redistributable, and AMD USB Audio Driver filter?

    Can someone tell me what are these two programs and what they do?

    1 Microsoft Visual C ++ 2005 Redistributable 2. AMD USB Driver Audio Filter (Advanced MICRO Devices Inc.

    .

    Hello

    Here's the explanation for details, requested clarification on the following programs.
     
    1 Microsoft Visual C++ 2005 Redistributable
     
    Most common programs are written in a program called C and C++, which is widely used by developers and they are a source of standard libraries what software use to support and to perform their designated functions.

    When software is installed in the computer, he needs help / support of software of Visual C++, in order to avoid a software to download the copy of its source or support a coding Windows has integrated the software and download and storage space a s it updated to make it available to the software and to avoid unnecessary.
    It is strongly recommended that you keep your C++ updating so that no Microsoft software or third party to download an individual component each time.
     
     
    2. filter driver Audio USB AMD (Advanced MICRO Devices Inc.
     
    It is possible that you are using a product from AMD (card mother or specific device) and this particular software can be a pilot allowing filters update USB ensure operation smooth and full and for a device and its properties.
     
    Please let us know if you are facing problems with the software above, to receive the appropriate troubleshooting steps.

  • What type of driver sound has extension wav. Which audio driver should I download Windows 8 and how?

    What type of driver sound has extension wav? Which audio driver should I download Windows 8 and how?

    Sannia Hello,

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    1. do you try to play audio files. WAV extension?
    2. If so, what happens when you play the files? They do not play, or you receive an error message or a code?
    3. What is the brand and model of your tab Windows 8?

    Thank you for details on the issue.

    File (WAV) Audio Waveform format is a Microsoft and IBM audio file format standard for storing an audio bitstream on PCs. It is an application of the Resource Interchange File Format (RIFF) binary stream format method for storing data in "chunks", and thus is also close to the 8SVX and used the format AIFF on Amiga and Macintosh computers, respectively. It is the main format used on Windows for audio usually compressed gross systems and not compressed. The usual bitstream encoding is the format for linear pulse code modulation (LPCM).

    Audio driver is common for all types of audio files. However, in order to play an audio file with a specific extension, you may need a special codec that you can install. You can refer to this article:
    Codecs: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8

    Additional information:
    Download and install the drivers
    http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

    I hope this information helps.

    Simply answer the required information and let us know if you need more help.

    Thank you

  • Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

    Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

    I use Windows 7 Pro.

    I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.

    Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.

    Please guide me.

    Thank you

    Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory.  Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:

    AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84

    I hope this helps...

  • When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

    When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

    What you see is exactly the way it should work. Open the site your Finder window opens, so you can access the .muse file you want to open. Recently opened (just below it) will show the list of sites you have worked on lately. I don't know what else await you.

    I should probably see a list of site temp I want to open or DELETE?

    No, Muse or any other program besides will not open a file that you do not select to open. To remove a site simply open Finder on Mac go to the location of the file and delete it in one of the many ways that a Mac allows you to do.

  • Filtering on two date range filters

    Hi people,

    I need your valuable contributions to the solution.

    It must filter the analysis by using two date range prompt as shown below.

    Of Date1 - Date1

    Of Date2 - Date2

    Note: We use only a Date column for the whole Date and so far

    Requirement:

    ---------------------

    If Date1 and Date 1 is selected, then the first column of the analysis line should display as

    COLUMN1

    ------------------------------------------

    Of Date1 - Date1

    If both Date1 and Date 2 and Date1 AND Date2 is selected, then the first column of the analysis line should display as

    COLUMN1

    -------------------------------------------

    Of Date1 - Date1

    Of Date2 - Date2

    I hope I'm clear in the explanation of my requirement.

    Thanks to you all.

    DJ

    Check this box

    Oracle Business Intelligence, OBIEE 101: OBIEE between Dates invites

  • I have install the module "adblock more ' on my android furefox browser, but not block, he adds. What can I do?

    I have install the module "adblock more ' on my android furefox browser, but not block, he adds. What can I do? Please help me quickly.

    You should contact the https://adblockplus.org/forum/ extension

  • Two versions of FF must be installed? 26 and 27

    I use Win 8. I was looking at programs and saw that I had two versions of Firefox are installed, 26 and 27.

    I uninstalled 26 (because I got 27), and then, when I went to the launch FF, I got the error message: "Failed to load XPCOM", and he wanted to delete the shortcut.

    I did a system restore - and that it was not fixed.

    I downloaded the latest version of FF, installed 27.0.1, on what has been restored, and that fixed it.

    Is he not confused to have several versions of the browser installed?

    If you have installed on it, then the previous version has been replaced.

    If you are running the 32-bit version of Windows 8 and you have an English (United States) version of Firefox, then the above registry key is one you want to delete:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla Firefox 27.0.1 (x86 en-US)

Maybe you are looking for