Filtering on two date range filters

Similar Questions

• How to merge two date ranges

  Hello
  I have the rest of the table. I want to merge the date ranges if dates are continuous and the value is the same. I use Oracle 10 g. Help, please.
  
  START_DATE END_DATE VALUE
  ----------------------------------------------------------------
  
  1/1/2008 12/31/2008 1234
  1/1/2009 12/31/2009 1234
  
  
  Exit statement SQL must be as follows:
  
  
  START_DATE END_DATE VALUE
  ----------------------------------------------------------------
  
  1/1/2008 12/31/2009 1234
  
  
  
  Thanks in advance.
  
  Published by: user3898545 on January 27, 2010 19:44

  Hello

  user3898545 wrote:
  Hello
  Dates will not overlap but sometimes start_date can be equal to end_date in a row.

  Sorry, I'm not sure of that figure.
  If the query I posted is not giving correct results, post some samples (CREATE TABLE and INSERT statements are best, but a clause WITH as Tubby displayed is correct) and the correct results, you need these data.

  Please suggest if something needs to be done through pl/sql performance is also the key.

  I don't see how the PL/SQL will help in this problem.

  When two lines need to be combined, the end_date ranked sooner than always exactly 24 hours before the start_date on the line later?
  If so:

  WITH     got_grp         AS
  (
       SELECT     data.*
       ,     end_date - SUM (end_date + 1 - start_date) OVER ( PARTITION BY  val
                                                                   ORDER BY       start_date
                                              ) AS grp
       FROM     data
  )
  SELECT       MIN (start_date)     AS start_date
  ,       MAX (end_date)     AS end_date
  ,       val
  FROM       got_grp
  GROUP BY  val
  ,            grp
  ORDER BY  val
  ,            start_date
  ;
  

  Published by: Frank Kulash, 28 January 2010 14:03
  For example, a subquery added.

• SQL to generate the intervals from date of 6 months each, between two date ranges

  Hi all
  
  I looked in the forums, if someone uses CREATE_CHUNKS_BY_SQL for dates, but no luck.
  I want to update a table using pieces of dates.
  I need to generate date ranges to divide them by pieces.
  
  I have a table where I know that max (sales_date) and min (sales_date).
  Lets say max (sales_date): min (sales_date) 01/01/2008: 31/10/2010
  
  I want to break in intervals of 6 months (180 days) as below:

  chunk_id     start_date     end_date
  --------     ----------     --------
    1          01/01/2008     06/30/2008
    2          01/07/2008     12/31/2008
    3          01/01/2009     06/30/2009
    4          01/07/2009     12/31/2009
    5          01/01/2010     06/30/2010
    6          01/07/2010     10/31/2010

  He didn't exactly finish end of the month. Basically, I need these beaches of dates at apart 180 days.
  
  I appreciate if someone can throw some ideas on this.
  
  Thank you
  Raj.

  Hi, Raj,

  Sorry, it is unclear what you are asking.

  To generate a list of dates starting with min_sales_date and including all the 180 days after that up to (but not beyond) max_sales_date:

  WITH     got_params     AS
  (
       SELECT     DATE '2008-01-01'     AS min_sales_date
       ,     DATE '2010-10-31'     AS max_sales_date
       FROM     dual
  )
  SELECT     min_sales_date + (180 * (LEVEL - 1))     AS grp_start_date
  FROM     got_params
  CONNECT BY     LEVEL <= CEIL ( ( (max_sales_date - min_sales_date)
                                  + 1
                         )
                       / 180
                       )
  ;
  

  Output:

  GRP_START_D
  -----------
  01-Jan-2008
  29-Jun-2008
  26-Dec-2008
  24-Jun-2009
  21-Dec-2009
  19-Jun-2010
  

  December 16, 2010 is 180 days after June 19, 2010, but it is not displayed, because is after max_sales_date, which is 31 October 2010.

  I hope this helps you.
  Whenever you have any questions, post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data.

• Date range prompt--Null default value

  Hello

  It is a follow-up on post Date invites default NULL

  I have a similar case but using database directly request the report and have implemented a variable presentation with two date ranges. I want to leave the default value of the date white values in the dash prompt, but have the ability to enter values in the other guests and ignore the date of the application

  I have 4 variables of presentation being placed in the SQL query, two of which are the date ranges (between)

  I use OBIEE 10.3.1.4, is there a workaround to run the report using the other prompt values and ignoring the date values null?

  Hello

  Keep your 1900 filter in report itself and no default value chosen at the prompt. If this value is not visible in the dashboard and it will fly too when the user selects a value from the command prompt.

  Thank you

  AJ

• How to calculate the periods that overlap between two or more given the date range?

  Hi all

  If there are several durations then how we can calculate the period of time that overlap between these times.

  For example: for 3 time periods. 03/12/2015-16/08/2015, 05/01/2015 to 31/07/2015 and the 06/09/2015 to 30/11/2015, how the overlap period can be calculated?

  There are many potential unknowns in your question.  For example, you want to count any overlap at all?  If two dates overlap, what matters?  Overlap - each of them?

  In any case, here is a solution that counts how many periods are overlapping in any point in time...  She, of course, using temporal logic.  You can then use ValueAt(), WhenLast(), WhenNext(), etc. as appropriate.

  Assume that your model has a child entity called 'the period' with name 'all time periods' relationship and basic attributes 'start date of the period of time' and 'date of end of period of time'.

  In your example:

  an entity should have the time period start date = 03/12/2015 and the date of end of period of time = 16/08/2015

  another entity might have the time period start date = 01/05/2015 and the date of end of period of time = 31/07/2015

  another entity might have the time period start date = 06/09/2015 and the date of end of period of time = 30/11/2015

  To find the number of overlapping over time, we want to count or entities that have an active period, so the rule is perhaps the sum:

  the number of overlapping = the number of all the periods for which it is true that the time period is active

  How do we know a time is active?  This is the time logic comes in.  He is active on or after the start date or no later than the end date:

  the time period is active if

  TemporalOnOrAfter (the date of beginning of period of time) and

  TemporalOnOrBefore (date of end of period of time)

  That's all.  Now, you can perform a temporal visualization of the 'number of overlapping' and you'll see it rise and fall over time.  As a reference, he said that the number of overlapping = 3.0 from 06/09/2015 across 31/07/2015.

  I hope this helps.  You can use the same model to count periods of time functions, but you end up having to use the most logical date.  You of course can count the total number of entities and compare this number of overlap over time to see if they overlap, but I digress...

• How to pass the date range as in URL filter go

  Hello
  
  I am trying to build a Url go that has two filters, date range & text. I built the url below, but he continues to throw an error. The url is not from the date max and the app starts following error:
  
  Error: Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 46048] Month DateTime value 0 0000-00-00 is off limits. (HY000)
  
  Go to Url: https:companyUrl? GB & Options = rfd & Path = / shared/CompanyID/link & P0 = 2 & P1 = eq & P2=CustomObject4.%22Indexed%20Pick%201%22 & P3 = Leasing & bet = P4 & P5 = ""-CustomObject4 Custom Attributes '. " ZDate_26 & P6 = 2 + Date % 20'2014-08-01'+ day % 20'2014-12-31'
  
  
  Please suggest.
  
  Thank you
  Kiran.

  It seems that you convert the data type of char to date in the URL, I don't think that this is possible.
  Your code is like
  & P6 = 2 + Date % 20'2014-08-01'+ day % 20'2014-12-31'

  It suppose to be & P6 = 2 + 2014-08-01 + 2014-12-31

  I suggest doing the formatting for this filed using column properties and try.

  Hope this help, pls mark if yes ;)

• Date range search

  Hello
  Filtering data for a specific date range does not give the desired result. Currently, the column is a column varchar2.

  Then under query should display the records only 2 for the range of data between 01/01/2013, but his displays all records. Please notify.

  Sample data:

  
  create table Records_test (B_Recorded_Date VARCHAR2 (4000 BYTE))

  insert into Records_test values('12/04/2013');
  insert into Records_test values('7/25/2000');
  insert into Records_test values('10/30/2003');
  insert into Records_test values('9/5/2006');
  insert into Records_test values('12/5/1994');
  insert into Records_test values('12/19/2013');
  insert into Records_test values('9/4/1992');
  insert into Records_test values('8/7/2007');
  insert into Records_test values('9/28/2005');
  insert into Records_test values('12/10/2004');
  insert into Records_test values('11/28/2011');

  Select * from Records_test
  where
  (
  TO_CHAR (TO_date (substr (B_Recorded_Date, 0, 10), ' MM/DD/YYYY'), ' MM/DD/YYYY') > = to_char (to_date('07/01/2013','MM/DD/YYYY'), ' MM/DD/YYYY')
  and to_char (TO_date (substr (B_Recorded_Date, 0, 10), ' MM/DD/YYYY'), ' MM/DD/YYYY') < to_char (to_date('12/31/2013','MM/DD/YYYY'), ' MM/DD/YYYY')
  )

  04/12/2013
  25/07/2000
  30/10/2003
  05/09/2006
  05/12/1994
  19/12/2013
  04/09/1992
  08/07/2007
  28/09/2005
  10/12/2004
  28/11/2011

  Thank you.

  Hello user7988

  Try this:

  SELECT *.

  OF Records_test

  WHERE

  TO_date (substr (B_Recorded_Date, 0, 10), ' MM/DD/YYYY') > = TO_DATE('07/01/2013','MM/DD/YYYY')

  AND TO_date (substr (B_Recorded_Date, 0, 10), ' MM/DD/YYYY')<>

  ;

  The best way if you set this column as DATE, then there is no need to convert your varchar value date.

  Kind regards
  David

• Calculate the hours between two dates

  Hello
  
  I have a requirement to count the hours with 2 given timestamps, something like:

  SQL> select ((to_date('22-oct-2012 13:00:00','dd-mon-yyyy hh24:mi:ss') - to_date('20-oct-2012 13:00:00','dd-mon-yyyy hh24:mi:ss'))*24) B from dual ;
  
           B
  ----------
          48

  However, I wish it would be that simple. I just need to count the hours between two timestamps for the hours of work for example, 08:00 - 17:00, MONDAY to Friday (excluding weekends).
  So lets say I have to count the hours between two dates above the result should be 18 hours not 48 (4 hours on 20/oct, 9 hours on 21/oct to 5 hours 22/oct).
  How can I achieve this? Any idea will be useful.
  
  Thank you

  My query generates a list of all the hours between the start and end time, filters on the hours that are outside of the hours of work and then account for the remaining lines. Change that to partial hours must just be a case of replace the two occurrences of 1/24 with 24/01/60, then - as say you - Division COUNT (*) by 60.

  There may be performance issues using techniques of generation of line like this, if you put this in a query involving the joining of several lines of other tables (for example where the dates of beginning and end are derived from several employees?) or in several days. If you don't find it then count the number of whole days (taking weekends into account) between dates and work on the partial days after that it could be better. This would probably involve a lot of statements of case (which I don't have time to test it now).

  Ben

• Filter by date range table

  I use JDev 11.1.1.6
  
  I'm following Frank worm detailed information on how to filter the ADF tables by date range. The link is below.
  
  
  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/59-table-filter-by-data-range-176653.PDF
  
  
  I have 2 problems that I deal. They are:
  
  (1.) the datapicker for both filters are not make the date picker when I click on it. As I said I use 11.1.1.6 which I think should work. Note to Frank says he did not before 11.1.1.6. I can manually enter the date ranges and the filter works.
  2.) when I filter by my date or any other filter on the page, the filter returns the data that I expect to be back. For some reason the date filter is more restores. It's as if the entire filter facet disappears. I suspect it is because I do something wrong in the bean support. I posted this code below.
  
  Let me know if you have thoughts about what I might get hurt.
  
  
  {} public void onQuery (QueryEvent pQueryEvent)
  ArrayList < object > lAuditCodeArray = null;
  FilterableQueryDescriptor = lFilterableQueryDescriptor
  (FilterableQueryDescriptor) pQueryEvent.getDescriptor ();
  as submitted by the user such current filter criteria
  Map lCriteriaMap = lFilterableQueryDescriptor.getFilterCriteria ();
  
  The method links to set on the access ViewCriteria bind variables.
  OperationBinding = lRangeStartOperationBinding
  getBindings () .getOperationBinding ("setAuditDateRangeStart");
  OperationBinding = lRangeEndOperationBinding
  getBindings () .getOperationBinding ("setAuditDateRangeEnd");
  Object lAuditDateStartRange = lCriteriaMap.get ("AuditDateStartRange");
  Object lAuditDateEndRange = lCriteriaMap.get ("AuditDateEndRange");
  lRangeStartOperationBinding.getParamsMap () .put ("value",
  lAuditDateStartRange);
  lRangeEndOperationBinding.getParamsMap () .put ("value",
  lAuditDateEndRange);
  lCriteriaMap.remove ("AuditDateStartRange");
  lCriteriaMap.remove ("AuditDateEndRange");
  lRangeStartOperationBinding.execute ();
  lRangeEndOperationBinding.execute ();
  
  
  lFilterableQueryDescriptor.setFilterCriteria (lCriteriaMap);
  
  run the default QueryListener code added by JDeveloper
  ADFUtil.invokeMethodExpression ("#{bindings.") Audit2Query.processQuery} «»
  Object.Class, QueryEvent.class,
  pQueryEvent);
  
  
  filter of restoration carried out by the user selection
  llCriteriaMap.put ("AuditDateStartRange", lAuditDateStartRange);
  lCriteriaMap.put ("AuditDateEndRange", lAuditDateEndRange);
  lFilterableQueryDescriptor.setFilterCriteria (lCriteriaMap);
  }
  
  
  
  Here's the column I'm filtering where it's useful.
  
  
  < af:column sortProperty = "CrtdDttm" sortable = "true".
  headerText = "Date".
  ID = "crtDate" align = "center" width = "260".
  filterable = "true" >
  < f: facet = name 'filter' >
  < af:panelGroupLayout id = "pgl1" layout = "horizontal" >
  < af:panelLabelAndMessage label = "" to: ""
  ID = "plam1" >
  < af:inputDate id = "id1".
  value = "#{vs.filterCriteria.AuditDateStartRange} '"
  clientComponent = "false" >
  < af:convertDateTime pattern = "#{bindings." CsgAudit2.hints.CrtdDttm.format}"/ >
  < f: validator binding = "#{bindings." CrtdDttm.validator} "/ >"
  < / af:inputDate >
  < / af:panelLabelAndMessage >
  < af:spacer width = "5" height = "5".
  ID = "s5" / >
  < af:panelLabelAndMessage label = "" to: ""
  ID = "plam2" >
  < af:inputDate id = "id2".
  required value = "#{vs.filterCriteria.AuditDateEndRange}" = 'false' "
  clientComponent = "false" >
  < f: validator binding = "#{bindings." CrtdDttm.validator} "/ >"
  < af:convertDateTime pattern = "#{bindings." CsgAudit2.hints.CrtdDttm.format}"/ >
  < / af:inputDate >
  < / af:panelLabelAndMessage >
  < / af:panelGroupLayout >
  < / f: facet >
  < af:inputDate value = "#{row.bindings.CrtdDttm.inputValue} '"
  required = "#{bindings." CsgAudit2.hints.CrtdDttm.mandatory}.
  shortDesc = "#{bindings." CsgAudit2.hints.CrtdDttm.tooltip}.
  ID = "id3" readOnly = "true" >
  < f: validator binding="#{row.bindings.CrtdDttm.validator}"/ >
  < af:convertDateTime pattern = "#{bindings." CsgAudit2.hints.CrtdDttm.format}"/ >
  < / af:inputDate >
  < / af:column >

  Can you try to remove the validator and convert date time to the side of the filter and check.
  I had a similar problem with my custom filter and the filter facet did not. I discovered that it was because I had created a property my filter component (selectonechoice) bean binding.
  I used version Jdev 11.1.1.4.

  Thank you
  Rakesh

• How to tell the difference between two dates

  Hello:
  
  I have a question on how to get the difference in quantities for two dates in the replies and dashboard.
  
  This is the scenario. I have two guests date and three columns. The first column must be the sum of the amounts for the first quick date. The second column should be the sum of the amounts for the second fast date. And the third column is the difference between the first two columns.
  
  Basically, I'm trying to do something similar to a function of sum of two lines but trying to get the difference between the two rows. Any help to solve this problem would be appreciated.

  Use the COLUMN FILTERS level...

  the first column with the first variable of date quick presentation of the filter

  Similarly, the second column in the second variable of quick overview of date filter

  Kind regards
  Rambeau

• Formula to determine if a specific day of the week between two dates?

  I am creating a spreadsheet to track my time PD & holiday. I usually work weekends, and my vacation allowance includes a specific maximum number of Sundays a year. Is there a way to calculate how much Sunday fall between a date range (or any day of the week, by the way)?

  (i.e. If my vacation starts February 1, 2016 and ends March 2, 2016, Sunday how are included?)

  I know that I can calculate how many weeks have passed, using = Quotient (DateDiff (Start_Date, End_Date), 7), but it is possible to include two Sundays in a period of 7 days.

  Hi Eric,.

  Here is one approach.

  

  C2 = A2 + (7−WEEKDAY(A2,2))

  This concludes the first Sunday following the start date.

  

  D2 = STRIPDURATION ((B2−C2) ÷7)

  I formatted this column without decimal places to see full weeks of the first numbers Sunday.

  Quinn

• To add totals in a certain date range

  I have 3 sheets. Income, expenses and then an annual journal (has twelve columns, one for each month). Is there a way to get the numbers to add totals to a column of the spreadsheet of spending within the date range 01/01/16 and 31/01/16 and put the total in a cell in January on my sheet of each year. I can't understand a formula so that it can find the date range. I get a synyax error message.

  Assumptions:

  Your TABLES (not the leaves) are named income, spending and summary. Here is any other tables in the document with these names.

  Dates of expenditure are in column A of the table expenses. Other than the header line, all the entries in this column are values Date and time that have been entered as dates only.

  The amount for each item of expenditure is in column C of the expense table.

  Line 1 of the analytical table is defined as a header line.

  January is in column A of the summary table.

  Summary::A1 cell contains the date January 1, 2016, but can be formatted to display only the name of the month or the month and year. (but see the note below) *.

  Enter the formula in the cell that will contain total expenditures recorded with dates in January 2016 below:

  = SUMIFS ("Expenses: Expenses, $C: $A," > = "& A1, Expenses: $A," < = "& EOMONTH(A1,0))

  Example: All the amounts of expenditure were reduced to 1.00 simple confirmation of funds.

  * NOTE: The formula has previously worked with the format of the cells in the row 1 Summary defined to show only the month and the year (two digits) of the effective date values (the first day of the month indicated), but the table I built tonight January 1, 2015 to the format to display 16 Jan, one was interpreted as January 16 (2016) , and SUMIFS formula did not include not January 1 to January 14 numbers in January total.

  A custom, displaying the month (short or long) and the year (four digits) or a custom format shows only the name of the month (short or long) gave good results.

  Note that any format under control of the display, the effective date is the first of the month displayed.

  Table built and tested in Numbers ' 09 (v 2.3)

  Kind regards

  Barry

• Search for files by name, date range, size, content, etc.

  I just changed from windows XP pro to win 7 pro 64.  For twenty years, I used the "Norton File Manager" who does not work under Windows 7 Pro 64 bit.  I became dependent on its ability to search relatively sophisticated as by date range, size, content, name, etc.  I guess that Windows 7 has something like this, but I'm not.  Can you help me?

  On Tuesday, March 19, 2013 15:09:13 + 0000, csvideo wrote:

  I just changed from windows XP pro to win 7 pro 64.  For twenty years, I used the "Norton File Manager" who does not work under Windows 7 Pro 64 bit.  I became dependent on its ability to search relatively sophisticated as by date range, size, content, name, etc.  I guess that Windows 7 has something like this, but I'm not.  Can you help me?

  I recommend two different third-party search programs, both free:

  1. search everything, which is faster if you search by file name
  (http://www.voidtools.com/)

  2. agent Ransack, which is the best for finding content, etc.
  http://www.Mythicsoft.com/page.aspx?type=agentransack&page=home

• MaxL Script to clear the data between two dates

  Hi all

  I need advice to clear the data between two dates, I have three dimensions in my sketch, 'eno', 'hiredate' and the 'actualamount '.

  Now I need to erase the data between the date range, up to now, I have this script,

  Fix ("HireDate", "Eno")

  Difficulty (@relative ("00:00:00",0),@relative("eno",0)) 2015-07-15 "))

  CLEARDATA "sal."

  endfix

  ENDFIX

  These scripts only clears on a specific day, but I tried to write the script to clear between two dates, I surfed on a few sites, but no clear answers, finaanly came here, kindly help in this regard.

  Thanks in advance.

  Have you not tried the format of "startdate":"enddate" for example "August":"September."

  See you soon

  John

• GROUP BY date range to identify duplicates revisited!

  Good afternoon

  It is a continuation of the previous discussion, I previously created GROUP BY date range to identify duplicates

  Your help with the following would be appreciated (examples of data below)

  I've highlighted what I mark as returned to double as below:

  

  Definition of duplicate (However, this is slightly different to the previous post)

  the same account_num

  maximum 20 days apart tran_effective_date

  tran_processed_date maximum 10 days apart

  the same tran_amount

  However, I do not want to return a duplicate if they have both a tran_priced_date filled.

  So, in light of the foregoing, I don't expect the following account_numbers to be marked as duplicate:

  N100283 - one of the records has populated trab_priced_date

  N101640 - none of the records have the tran_priced_date filled

  N102395 - same as N101640

  N102827 - same as N101640

  N108876 - although the two documents have the populated tran_priced_date, the tran_effective_dates are more than 20 days apart.

  BUT for the rest of the accounts, N100284 and N102396 I want to execute the following logic

  Compare the 3rd rank in 4th place and ask the following questions:

  Is tran_effective_date to a maximum of 20 days out?

  Is tran_processed_date maximum 10 days apart?

  If yes then report it as dupe

  Compare line 4 to 5, then ask the same question until you get to the line 4 or 5. When everything is done, I want to examine only the transactions that have the status of normal and if the above question is true for both and then return to my game of result as dupes.

  I hope that makes sense!

  BEGIN
    EXECUTE IMMEDIATE 'DROP TABLE samp_data';
  EXCEPTION
    WHEN OTHERS THEN
      IF SQLCODE = -942 THEN
        DBMS_OUTPUT.put_line('');
      ELSE
        RAISE;
      END IF;
  END;
  /
  
  
  CREATE TABLE samp_data (
    ACCOUNT_NUM             VARCHAR2(17),
    TRAN_ID                 NUMBER(10),
    TRAN_TYPE               VARCHAR2(50),
    TRAN_EFFECTIVE_DATE     TIMESTAMP(6),
    TRAN_PROCESSED_DATE     TIMESTAMP(6),
    TRAN_STATUS             VARCHAR2(17),
    TRAN_PRICED_DATE        TIMESTAMP(6),
    TRAN_AMOUNT             NUMBER(13,2)
    );
  /
  
  
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100283',140119178,'Regular With',to_timestamp('01-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.34.235000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('21-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),200);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE,TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100283',140158525,'Regular With',to_timestamp('13-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('26-MAY-15 08.39.14.090000000 AM','DD-MON-RR HH.MI.SS.FF AM'),'Normal', null,200);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100284',140118826,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.19.072000000 AM','DD-MON-RR HH.MI.SS.FF AM'),'Normal', to_timestamp('20-MAY-15 03.25.05.438000000 AM','DD-MON-RR HH.MI.SS.FF AM'),450);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100284',140158120,'Regular With',to_timestamp('06-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('23-MAY-15 08.38.42.064000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Reversed', to_timestamp('21-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),450);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N100284',140158120,'Regular With',to_timestamp('06-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('02-JUN-15 08.38.42.064000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('31-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),450);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N101640',140118957,'Regular With',to_timestamp('18-MAY-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.25.015000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,120);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N101640',140158278,'Regular With',to_timestamp('22-MAY-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('26-MAY-15 08.38.56.228000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,130);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102395',140118842,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.19.665000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,250);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102395',140158235,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('26-MAY-15 08.38.53.093000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,250);
  
  
  
  
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140118823,'Regular With',to_timestamp('09-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('18-MAY-15 07.00.18.931000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('19-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140158099,'Regular With',to_timestamp('16-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('24-MAY-15 08.38.39.443000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Reversed', to_timestamp('21-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140158099,'Regular With',to_timestamp('16-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('29-MAY-15 08.38.39.443000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('30-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140158099,'Regular With',to_timestamp('12-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 08.38.39.443000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Reversed', to_timestamp('30-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102396',140158099,'Regular With',to_timestamp('14-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('23-MAY-15 08.38.39.443000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Reversed', to_timestamp('30-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),750);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102827',140118850,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('22-MAY-15 07.00.20.045000000 AM','DD-MON-RR HH.MI.SS.FF AM') , 'Normal',null,157.84);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N102827',140158118,'Regular With',to_timestamp('03-JUN-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('26-MAY-15 08.38.41.861000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', null,157.84);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N108876',139840720,'Regular With',to_timestamp('01-MAY-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('11-MAY-15 08.35.34.646000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('20-MAY-15 03.25.05.438000000 AM','DD-MON-RR HH.MI.SS.FF AM'),1000);
  Insert into samp_data (ACCOUNT_NUM,TRAN_ID,TRAN_TYPE,TRAN_EFFECTIVE_DATE,TRAN_PROCESSED_DATE, TRAN_STATUS, TRAN_PRICED_DATE,TRAN_AMOUNT) 
  values ('N108876',139889880,'Regular With',to_timestamp('22-MAY-15 12.00.00.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'),to_timestamp('12-MAY-15 08.49.29.080000000 AM','DD-MON-RR HH.MI.SS.FF AM'), 'Normal', to_timestamp('21-MAY-15 03.26.18.954000000 AM','DD-MON-RR HH.MI.SS.FF AM'),1000);
  /
  
  
  select * from samp_data
  ORDER BY account_num, tran_effective_date, tran_processed_date;
  

  PL continue the discussion in your original post