Easy way to auto submit the custom after the approval of the PO report

Similar Questions

• Is there an easy way to download all the adobe photoshop tutorials video to watch offline on a trip?

  Is there an easy way to download all the adobe photoshop tutorials video to watch offline on a trip?

  Thank you

  If you buy something like that, you can watch whenever you want: 15 http://www.adobepress.com/store/adobe-photoshop-cc-2015-release-learn-by-video-97801343841

• An easy way to re-import massive media after a hard disk crash if the library files are intact?

  Hello

  I'm running 10.2.3 on OS X 10.11.3 FCPX. My external hard drive just crashed, and while I was able to save most everything else (including library files, proxy support, etc.), Miss me about 90% of the media about 2 000 "original" files. Because the library files have been saved, it seems that my projects seem to be intact, including the cuts and changes. Since FCPX knows what files and parts of files were previously imported, import should be easy... except for the fact that there are about 1 800 distributed clips on dozens of camera archives.

  Is there a way to 'massive re-import' office where he knows the clips came, without having to wade through thousands of clips in dozens of archives and manually by clicking on each of them? Because there is also the fact that, due to several archives of the camera used, different are multiple "Clip #1", "Clip #2", etc. that FCP is solved by adding a number at the end (for example, "Clip #1 (fcp1)" and "Clip #1 (fcp2)"). " I'm afraid that if I import everything in disorder (maybe I not initially import a clip, but returned later and get it), I'll have to sift through to find a needle in a haystack and rename the files manually.

  Even if I have to specify the locations of these archives of tens of couple, it would be so much easier than having to go into each of them and click 1 800 files manually... Any suggestions?

  Please and thank you!

  Too bad. I had assumed the import > reimportation of the camera wasn't working, but apparently because I had saved the AVCHD archives on my hard drive via the Finder instead of 'Create the Archives' of in Final Cut, he just didn't see them. Creating new archives of these same AVCHD files (or rather the folders 'PRIVATE' which originally housed them on the SD card) did the trick and I was able to reimport. Alternatively, I could have re-recorded these SD cards PRIVATE folders and it would have identified those as the original 'camera' once again, too and I could have reimported it... but who would be tedious.

• Search for "blackle". Is there a way to auto-noir the bottom of each page visited?

  I like the idea of using a black background instead of white on my devices. I'm saving the planet and my eyes. Is there a way to display all the origins of the auto-noir site? And I suppose that, by extension, the white of the text? I understand the images on the page would remain in their original colors, and that's fine. I see a blank page and I want to paint it black.

  People have experimented with modules in this direction over the years. Some who always seem to be maintained are:

  https://addons.Mozilla.org/firefox/addon/night-mode-Pro/

  https://addons.Mozilla.org/firefox/addon/aniverto/

  https://addons.Mozilla.org/firefox/addon/eyeguard/

  This allows you to switch between different color profiles and is probably a little more of "brute force":

  https://addons.Mozilla.org/firefox/addon/color-toggle/

• Is there an easy way to view all the elements of the façade which are hidden in a pragmatic way?

  Hello

  There were some cases where the new indicator that I created was actually overlaps the other indicator which was hidden at the time of development.

  I knew only when the program is operating normally and the hidden indicator will appear on the front panel.

  It would be great if I can see all the elements of hidden façade while in development mode.

  Is there an easy way to do this or am I missing something?

  Thank you.

  Steve

  See here: http://forums.ni.com/t5/LabVIEW/Darren-s-Weekly-Nugget-08-14-2006/m-p/403788

  You can also choose to vote in favour of this idea: http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Show-all-hidden-controls-and-indicators/idi-p/1113431

• Easy way to set up the trial and purchase

  Is there an easy way or one ti library implement a trial and buy the license model?

  Best regards

  Levion

  Have you considered to build this in your application?

  1. Setting up a digital good representative "buy" as the user can buy to unlock all the features of your application.
  2. Record a timestamp in memory when the user installs or opens the first app.
  3. If 'buy' digital has been purchasing, always check at the start of the application.  If it's not, and if the timestamp is greater than X length of time (e.g. 5 days or 1 month), then display a prompt asking you to buy access to the rest of the content.

  Something like that?

• IIOMetadataNode is there an easy way to get all the items?

  Y at - it an easy way to get all elements with no recursion to a depth of level in the XML getAsTree IIOMetadataNode ("formatname") document and make the images of type jpeg with EXIF metadata (when its present on the image) who return to the IIOMetadataNode?

  You can call getChildNodes() on the node returned by getAsTree(). The returned NodeList will contain children with a depth of level.

  The EXIF data will be be summarised into a byte array [] under a sequence of 'unknown' marker with a value of 225 marker.

  /**Returns the EXIF information from the given metadata if present.  The
   * metadata is assumed to be in 
  javax_imageio_jpeg_image_1.0
  * format. If the EXIF information were not present, then null is recuperer.* / public static ubyte [] getEXIF (IIOMetadata meta) {//javax_imageio_jpeg_image_1.0 //-->markerSequence //--->unknown (attribute: 'MarkerTag' val: 225 (for exif)) root IIOMetadataNode = (IIOMetadataNode) meta.getAsTree ('javax_imageio_jpeg_image_1.0');}
  
      IIOMetadataNode markerSeq = root.getElementsByTagName("markerSequence").item (0) (IIOMetadataNode);
  
      Notorious NodeList = markerSeq.getElementsByTagName ("unknown");
      for (int i = 0; i)< unkowns.getlength();="" i++)="" {="" iiometadatanode="" marker="(IIOMetadataNode)" unkowns.item(i);="" if("225".equals(marker.getattribute("markertag")))="" {="" return="" (byte[])="" marker.getuserobject();="" }="" }="" return="" null;="">
  
  You must use a TIFFImageReader to analyze the table of byte [] being the TIFF metadata EXIF metadata.
  		   

• Easy way to qualify for the requirement of 'Service' B4BB

  It seems to me that the best way to qualify for the service requirement, should just link to your application in AppWorld. For example, ask the user to review your app, or maybe a link for them show all your existing applications.

  It uses the framework of the call which is a qualified service for the B4BB program.

  The code is as simple as:

  var request: InvokeRequest = new InvokeRequest();
  Request.Target = "sys.appworld";
  Request.action = InvokeAction.OPEN;
  Request.Uri = "appworld://content/" + appId;
  InvokeManager.invokeManager.invoke (request);

  I think you could even make an argument, a getURL() call simply the same thing, so what is not also meeting of eligibility for B4BB?

  Download

  navigateToURL (new URLRequest ("appworld://content/" + appId));

  You can have lots of fun with other prefixes too:

  https://developer.BlackBerry.com/air/documentation/BB10/blackberry_world.html

  You haven't added anything to your XML files to call a target. These tags are only if you want to be a target. Use the sample code that I posted to call BBM, and it will work fine.

• Design of a banner stand: is there an easy way to work on the margins to recommend / bleed?

  So its my first time, creating a banner stand and something larger. I was wondering if there is a way to establish the range recommended for the size of the document? Or do I just do it by eye. The banner dimensions of our 800 x 1200 mm.

  Also other tips for creating greater document would be appreciated.

  Luke,

  Certainly, you should talk to those who the printing banner. It is 800 m wide, about half a mile (or is it 8000 mm or something)?

  To create a (very) large artwork, work across, maybe 01:10, he may move up in relation to printing. Remember to increase the resolution of raster images effects raster by inverse scale factor so the resolution becomes the final size. Talk to the printing of requested or desired resolution, too.

• Is there a way to auto-charge the workspace?

  Whenever I have DiaDem I have to manually go to the tab startup script and select the file-> recent workspaces-> (select name)...

  Is it possible to have the startup script that automatically?

  Hi Colin,

  You just need to change a SCRIPT parameter, and then save the Desktop.DDD file.  In the SCRIPT pane, select the menu "settings > Options > SCRIPT", then choose the right *. WSP file in the dialog box and click .  Now select the menu "settings > Options > save as" and replace your Desktop.DDD file.  That's all.

  Brad Turpin

  Tiara Product Support Engineer

  Instruments to

• Easy way to delete all the DRM configuration

  Hi team,

  We have few resources to install and so whenever a new project is, you need to delete the old configuration manually going to each objects. Wanted to know is there any utility that is available or any simple process that removes the DRM configuration and makes the application as fresh.

  I know that we can delete the schema and create new ones, but this requires a DBA help and we do not have to do the same. DBA needs time to remove the schema and the new restoration, we cannot create the DRM scheme directly. Y at - it a script that can be provided to the DBA to run and clear all the tables in the DRM schema without disturbing the important data like Dal_updates etc.

  Any other ideas are welcome.

  Thank you

  @

  Hello

  I have an idea on this requirement, which is a bit, but as far as I know, it should work.

  There will be a first activity of the side time DBA. The DBA to create two application (APP1 and APP2) ask for the first time. So both applications are now empty.

  Now, you start your work in APP1 and hold APP2 because it is safe and empty. Once your work is done and you want to delete everything he just run the copy of the application functionality and copying in APP1 APP2. So, it will copy the empty APP2 application in application APP1 . I think that this will also remove the audit tables.

  So donnot you need DBA help every time.

  The link to the copy of the application is: https://docs.oracle.com/cd/E51367_01/financialsop_gs/FADRI/ch04s03.html

  Let me know if it helps

  Thank you

  Khady Sylla

• Is there an easy way to find all the missing smart objects in your PS document?

  I have a file which is quite large with many layers and I can't seem to find the missing linked smart object. I usually just get Red? Select this option. But I looked and don't see that anywhere, but always get the message "could not document X.psd package, because it is missing a file linked smart object.»
  In InDesign at least we could see a list of all the links and just click it to redo the link. I was wondering if there was something escapes me? If this isn't the case, PLEASE add this feature. It's really one of the biggest mistakes when kind of forcing the users to use the cloud objects from the library.

  Hi toolsalesman,

  Refer to this article to the layers of filter based on the lack of linked smart objects: working with objects in dynamic in Photoshop

  Kind regards

  Claes

• is there an easy way to comply (AVCHD) .mts files after editing?

  I made a mount and I would like to send an xml at will, but I just noticed that solve nog play .mts files...

  It would be useful to get somehow only edited shots to the right timecode even in my calendar, but with a different format such as prores.

  1. use the prelude to transcode the original media in a friendly format Resolve.  Keep the same clip names.

  2. with Premiere Pro closed, rename or move the folder with the original media.

  3. When you reopen the project, PP will ask where are the media.  Point to the new files.

  4. export your XML file from there.

• Y at - it an easy way to highlight the current iteration of a currently running on the front panel of a for or while loop?

  Y at - it an easy way to show on the Panel before which iteration of a loop is running during the time the loop runs.

  Thank you

  Chuck M.

  Unless I'm missing something...

  

• The Microsoft 10 update on 28/11/2015, why did you remove each icon in my taskbar? An easy way to restore?

  Someone at - it an easy way to restore all the icons in my taskbar that Microsoft has removed this morning in an update that is supposed to make Windows 10 'even better '?

  Looks like the update repair, it finally worked.