EasySign: what I can or cannot change the fields to fill?

Similar Questions

• Cannot configure the fields to fill in Mode "to prepare the form." Please help :)

  Hello Adobe community.

  Here is a video link to explain my problem, there is also some text below explaining my problem too:

  Questions of implementation of the fields to fill in Adobe Acrobat.webm - Google Drive

  Last week I published a PDF file in Acrobat and added to fill fields... everything worked very well.

  This week, I'm doing the same thing.

  -J' open the PDF file in Adobe Acrobat (CC)

  -I'm going to "prepare the form."

  -J' I 'add a text field.

  * Now at this stage, everything worked fine. But now... I add the text field and I can't change it at all. I can't resize the text box, select it, nothing. I can even add a default in its properties, and nothing will be displayed. What is going on? I tried troubleshooting this online and I can't find an answer. In addition, I just did this last week, so I know it's possible lol.

  Any help would be greatly appreciated

  Levi Koenig

  It is a strange...

  First of all, thanks for the video, it's so much easier to understand what is happening when I see how things do not work.

  From what I see, I guess that it is something that is specific to this particular document. Have you tried to add form fields to a whole new document? You can do by ensuring that no other document is open in Acrobat, then Cmd-Shift-T to create a new document with a blank page in it. Now select Tools > prepared form - because this is a new document that was never recorded, Acrobat invites you to save it. Once registered, try to add a form field. It work? The form field is the way that you expect it to behave?

  If this isn't the case, then it is very likely that there is something wrong with the installation of Acrobat. The first thing I would try is to select help > check updates, make sure that you are running the latest version of Acrobat DC. If this does not help, I uninstall Acrobat and install again a new download. You can download Acrobat here: download Pro or Standard versions of Acrobat DC, XI or X

  If the problem is specific to your document, we will know why this is. It is possible that the document is corrupt. There are several ways you can try to recover from some alterations: the first thing I would try is to do a "save under" to save a new file name. Does it work or you get an error message? If you can save as a new file, the new file shows the same problems? If so, then try to extract just one page in a new document. To do this, open the thumbnail on the left, then select the page, right-click and select Extract page. This sill to create a new document with just one page in there, save it and try again.

  If you are still not able to add form fields that behave properly, it gets a bit more complex. How was the file created? Application used to create the original file and what application was used to save the file as a PDF file? Would you be able to share this file?

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• Cannot change the unit of measure in pixels in Photoshop CC image size dialog box. can anyone help?

  Cannot change the unit of measure in pixels in Photoshop CC image size dialog box. In the Photoshop preferences, the unit of measure in pixels and in the dialog box canvas size pixels already is the unit of measure. Can anyone help?

  

  Resample uncheck lock the pixel dimensions, so it cannot be changed.

• CS6 on a pc.  Cannot change the resolution on photo downloaded from my Android phone.  What should do?

  CS6 on a pc.  Cannot change the resolution on photo downloaded from my Android phone.  What should do?

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome

• When I create a rectangle, I can not not change the shape of a rectangle with the cursor in illustrator CC 2014 for what?

  When I create a rectangle, I can not not change the shape of a rectangle with the cursor in illustrator CC 2014 for what?

  Xavigarcia,

  I'm afraid that have met you the Rectangle Live bug that is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• Cannot change the Google search bar

  In Safari, I go to Google.com and do a google search. So far so good.

  Now, on the search results page, I try to edit the search in the Google search bar and nothing happens - the Google search bar is totally insensitive. To do another search, I use the address bar in Safari or reload google.com.

  I have deleted history, deleted all the data of the Web site, disconnected plugins and extensions, deleted the cache via the menu Developer. I used 3 CleanMyMac to clear and reset everything.  I can't solve the problem.

  Safari 9.0.2 (11601.3.9)

  OS X El Capitan 10.11.2

  Mac Mini (late 2014)

  A

  Please see below:

  Cannot change the Google search criteria in Safari

  B

  'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.

  Repeat with this line:

  /Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent

  Restart the computer and empty the trash.

  You may also delete one or more of these elements in the same way:

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

  Never install "CleanMyMac" or something like that.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Cannot change the font color on the desktop icons

  I am running windows vista. I can't change the font as in windows xp. No matter if the background is dark or the police is always black... Help!

  Hello

  Thanks for posting the question in Microsoft Answers.

  I apologise for the inconvenience.

  Unfortunately, you cannot change the font color of desktop.

  Because desktop wallpaper images have different colors, it is easy for the colors of unreadable fonts if they are on top of the same color in a background image to display. For example, a black font on top a dark part of the background image or a white font on a white part of a background image.

  The desktop icon fonts are dynamic and show white on dark background and change in white with a shadow effect black on a light background.

  In previous versions of Windows, it did not matter what color you chose to fund policies, some would still make invisible because of the background color of a desktop wallpaper. The user was constantly moving icons around the desktop computer to another colorful area where the police could be read. This was the source of a large number of complaints from users asking for a policy that was still visible, regardless of the color that was behind the police.

  However, you can change the theme and see if that helps:

  Change desktop theme:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Hope this information helps. Let us know if you need additional assistance. We are happy to help you.

• Microsoft Movie Maker - cannot change the length of each clip.

  Cannot change the length of each clip on Microsoft Movie Maker.

  I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

  I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

  Thank you

  Cannot change the length of each clip on Microsoft Movie Maker.

  I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

  I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

  Thank you

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• "Cannot change the priority. The operation could not be performed. Access denied. "

  When you attempt to change the priority of a process in the Task Manager (no matter what process, I've tried a few) I get the error message: cannot change the priority. The operation could not be performed. Access denied. It is while being logged on as an administrator. Would appreciate a solution.

  Since Windows Vista and Windows 7, a logon administrator account always uses a standard or limited account for certain purposes. To access these properties, you can run a program using the "Run as administrator". To run as an administrator, you right-click on a program and select "Run as Administrator" in the right click menu.

  Some processes of the system, such as services, you cannot change even as an administrator.  Come on in "show processes from the user all the" which will ask for permission. Then reopen the task Administrator Manager and then see if you can change the priority.

• Cannot change the name of the file in the file properties.

  Original title: Cannot change the file properties

  Some downloaded files have a value in the box "title" under the details (after clicking Properties)
  I can't remove this 'title' and it appears so when I share the file on my network.
  The file is located on a portable hard drive, but I tried to move some files from problem to my office to see if I could solve these problems there, but nothing has worked.

  I already have
  -taking possession of the object
  -allows full control for all users
  -tried to use the "attrib - r + s' function
  -among other...

  I just want to know if there is a way to change the details of the file. On another windows help page it says something along the lines of "some attributes cannot be changed" I hope this isn't the case.

  Any help at all would be great, if no additional information is needed let me know.
  Thank you

  This information is set when the file is created.  Windows has no native ability to change.  You need a third party program.  For example, see link below.  Note that I have no idea if it's any good or works in Windows 7.  Gives you the link just to get an example of what to look for.

  abcAVI Tag Editor
  http://abcAVI.kibi.ru/

• Cannot change the folder name of the user, i.e. the C:\Users\user name (folder name)

  I got a new computer w/Windows 7, but Set - up guy was working on 2 computers and put the wrong name in this machine slot 'username '.  All seeking answers to correct (my machine automatically books with my ADMIN correct name but doesn't let me change an incorrect name in the USER file), I came across this on VISTA.  It also applies to Windows 7?

  "What you see is the reference in the"C:\Users\user name"folder. While you can change the registered owner and the name of the user account, you cannot change the name of the folder 'C:\Users\user name'. The only way to do this is to create a new admin account and delete the one in a new. »

  If the solution IS identical to that of Vista, the instructions on the following link apply?
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Yes, the solution is identical to that of Vista, and apply the instructions at this link.

  Create a new account with the correct name and delete the old account.  If you wish, save the old account during erasing files and copy them into the new account.