EBS R12.2.4 Mobile Apps

Similar Questions

• Mobile App for approval of EBS 1.2.0 on iOS and Android

  Hi all

  EBS R12.2.4

  RHEL6

  https://blogs.Oracle.com/fusionmiddleware/entry/mobile_app_for_approvals_for

  IOS9 is supported in the Mobile app?

  Thank you very much

  JC

  Here you will find information about mobile apps:

  https://blogs.Oracle.com/stevenChan/entry/mobile_apps_ebs

  He mentions that you need iOS 7 or a later version.

  You can connect a SR if you wish. I recommend you to do.

  Kind regards

  Bashar

• What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

  What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

  If you want to extend the pages of EBS, you need to use the OA framework for 12.2 version.  There is no native support for the extension of EBS by using ADF pages.

  If you want to build the ADF custom applications that integrate with EBS you can watch using the SDK of the EBS (see My Oracle Support) that offers a number of design patterns to allow you to do.

  With respect to the version of Fusion Middleware based on EBS 12.2, take a look at the notes 1911660.1.  11.1.1.6 is currently the base version supplied with 12.2.4 with the 11.1.1.7 version is the highest version supported.

• How to restrict the other user of patterns of connection instead of apps in EBS R12?

  Hello
  
  We use the EBS r12 (12.0.6) with database (10.2.0.5) in RHEL 4.6 (64-bit).
  
  In fact, I checked that users like INV, GL, PO etc, are bydefault can connect to the basis of EBS by using any tool like TOAD development.
  
  So, how can we protect them instead of the APPS user?
  
  
  
  
  
  Thank you
  fazijee

  Hello
  You must change the default password for these schemas. Follow it please: -.

  1. how to change the default passwords in the Oracle Applications? [813653.1 ID]

  2. how change Applications going using the apps schema password change Utility (FNDCPASS or AFPASSWD) [ID 437260.1]

• OBIEE for EBS R12.2.4

  Hi all

  There the OBIEE for R12.2 EBS?

  Is OBIEE apps dba or developers?

  Kind regars,

  JC

  Scalability, performance and functionality of discoverer have serious limitations.

  OBIEE is much better than discoverer in all directions.

  11.1.1.9 and 12.2.1.0.0 are certified with 12.2.4.

  I recommend you to go to 12 c, you'll have better integration goes forward with 12,2 EBS.

• Installation failure: EBS R12.2.5 on Windows Server R2 Standard 2012

  Hello

  I install EBS R12.2.5 VISION Instance on Windows Server 2012 R2 Standard, that is certified. I downloaded the media and made the scene and complete the prerequisites.

  I installed it, under Tools before building the stadium and run rapidwiz

  • Microsoft Visual Studio Express 2013 for Windows Desktop ()Doc ID 1330706.1()
  • Cygwin (Doc ID 414992.1( )

  Then build step, all right.

  Checked it the rapidwiz version:

  C:\stager122\startCD\Disk1\rapidwiz > RapidWizVersion.cmd

  Oracle E-Business Suite quick installation wizard

  Version 12.2.0.50

  (c) copyright 2000-2011 Oracle Corporation.  All rights reserved.

  Press a key to continue...

  Then I run the RapidWiz.cmd to install...

  at 29%, I got an error, the error detail is given below:

  C:\Users\ADMINI~1\AppData\Local\Temp > C:\stager122\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java - cp C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\ASInstallHome\fnd\... \j11067592_fnd.zip; C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\ASInstallHome\fnd\java\3rdparty\stdalone\xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=C:\oracle\app\VIS\fs2\EBSapps\appl\admin\VIS_srcebs\-Doracle.apps.fnd.txk.runtime.config=C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\xmldocs\instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: FileSys OS COMMAND Failed: out = 3 see the log file for more details. CMD = cmd /c rmdir /s /q C:\\oracle\\app\\VIS\\fs2\\FMW_Home\webtier\OPatch # node = NodeId = 1698 Type = 24 TypeName = filesys_patch_action Name = RefId = State 901 = init ConfigDoc = APPS_OHS_HOME ParentDoc = null topology = R12 Action = os_cmd

  at oracle.apps.fnd.txk.config.FileSysPatchActionNode.doFileSysOSCmd(FileSysPatchActionNode.java:169)

  at oracle.apps.fnd.txk.config.FileSysPatchActionNode.processState(FileSysPatchActionNode.java:101)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  C:\Users\ADMINI~1\AppData\Local\Temp > if 1 == 0 goto: INSTAS_OK

  C:\Users\ADMINI~1\AppData\Local\Temp > echo cannot install specific patches

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  APPL_TOP install the driver running for instance SCREWS

  I tried many things, re-download the error also, but always the same media.

  Kindly help me.

  Thank you and best regards,

  Waqas

  With the help of VMWare he can't.

  Using Oracle VM VirtualBox, as successful.

• EBS R12.1 login page cannot display - after installation

  Hello

  I installed Oracle EBS R12.1 with multi node installation

  Host system: Windows 7

  VMPlaer:

  System1 comments: Database 64 bit OS Oracle Linux 6.7 Vision node

  System2 comments: OS Oracle Linux 64 bit Apps Tier 6.7

  EBS Application installed successfully, and I can see both are rising and running, I can see the login page (no forms) in DB and Apps nodes. And I can connect to the database of customer of db host system, but not able to open the login page to the host system. I checked the version of java and every thing looks fine at the host system, I can open it with other EBS on all issues.

  Based on Metalink notes:

  Solution1: Auto config ran level apps and does not - and file DBC looks good - no problem on the automatic configuration

  Option2: Recompiled from $FND_TOP/patch/115/bin - no JSP compiler error

  My conclusions from host system:

  Apps URL: http://192.168.64.130:8000/OA_HTML/AppsLogin

  When I am trying to open in Internet Explorer:

  This page cannot be displayed

  •Assurez - you have the web address http://192.168.64.130:8000 is correct.

  • Look for the page with your search engine.

  •Refresh page in a few minutes.

  When I am trying to open in Mozila:

  URL changed - which means that he is in communication with the server, something stops

  Mozila:

  http://ebsapps.Oracle:8000/OA_HTML/RF.jsp?function_id=1032925 & resp_id = 1 & resp_appl_id = 1 & security_group_id = 0 & lang_code = US & Params = 6AW2cE1mZ6NDm8Na0RNB9Q

  The connection has expired

  The server to ebsapps.oracle takes too long to respond.

  The site may be temporarily unavailable or too busy. Try again in a few moments.

  If you are unable to load any pages, check your computer's network connection.

  If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

  After delay, issue, I checked in the applications node

  I could see the suite of changes, I don't know I made these changes before installing. Seems to be after the restart apps replaced node network manager the /etc/resolv.conf file.

  / etc/etc/resolv.conf: this cannot be a problem, I think, because I can open the page of connection on the DB node

  options attempts: 5

  options timeout:15

  I'm not sure what could be the problem. Please guide me to solve this problem. Any help will be be appreciated.

  Thank you

  Reddy

  Found the issue,

  Need to ti, consult firewall for host system settings and details added linux host:

  C:\Windows\system32\drivers\etc-

  192.168.64.129 ebsdb.oracle

  192.168.64.130 ebsapps.oracle

  Thank you

  Reddy

• Change the name of the server - EBS R12.2

  Hi all

  EBS R12.2.4

  RHEL6.6

  We have UAT instance apps layer with the name of the server "app.example.com".

  I want to change the name of the server to "uat.oracle.com".

  What are the activities that I have to do to carry out this task?

  Thank you very much

  JC

  Run preclone

  change the name of the server

  Make the appropriate changes to/etc/hosts

  Run adcfgclone

  concerning

  Pravin

• How do I check the applied patches - EBS R12.2.4

  Hi all

  EBS R12.2.4

  OEL 6

  We have layers applications (appluat) and db (orauat) on different servers, or nodes.

  We applied a lot of tasks on the layer of apps. But I don't know if it has updates on the database tables.

  Then, the application server crashed and restore the backup that is older than a month.

  How do I know what patches have been applied in the original level of apps? Can we check the ad_bugs or the ad_applied_patches for re-mapping audit?

  Thank you very much

  JC

  Hello

  See the table in the ad_applied_patches and re-apply all patches since the accident.

  Kind regards

  Bashar

• Fix missing for EBS R12.2 quick installation?

  Hi all

  EBS R12.2.4

  RHEL 6.5

  An Oracle Consultant installed the VISION instance to Assistant Rapid aid for our demonstration tests.

  After that, I was task to install the instance of CRP to help Assistant Rapid to start at our facility to the CRP/test.

  To my dismay, some functional test gets the error in CRP but runs well in the VISION.

  I think I have missed a few major patches or applied the wrong patch when installing apps?

  How can I check which patch is missing or poorly implemented, by comparing the two instance?

  In comparison, there are ins invalid objects CRP which is VISION valid example is the package APPS. IBY_VALIDATIONSETS_PUB

  The cause is the incompatible table IBY_DOCS_PAYABLE_VAL_GT of the CRP and the Vision which have different structures. There are some missing columns in CRP:

  INT_BANK_BRANCH_TYPE
  EXT_BANK_BRANCH_TYPE

  Please help how to find the patch that will fix these inconsistencies of table.

  Thank you very much

  JC

  I don't know how to continue without instruction, like another note asking to apply this hotfix. I would try to apply the fix in normal mode (when I have no time constraints)

  Want to logging than an SR can help solve the problem more quickly.

  It's interesting too https://blogs.oracle.com/stevenChan/entry/ten_ways_of_using_isetup_to_st

  Have not worked on it yet, but your comparison question sparked an interest for ways to compare the instances

• How do I abort or kill or cancel suspended adoption patch run? (EBS R12.2.4)

  Hi all

  EBS R12.2.4

  OEL 6.5

  Check patches (adoption-status) without previous state, I applied a fix to help:

  phase of adoption $ = patch = 20059164 patchtop = / home/applcrp2/patch_for_application

  But I got the following error:

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/05/25 15:28:41] Mental health of high-performance database controls

  [EVENT]     [END 2015/05/25 15:28:41] Completed the database sanity checks

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  Log file: /home/applcrp2/CRP2/fs_ne/EBSapps/log/adop/adop_20150525_152806.log

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  
  

  I tried to run adoption-status and I discovered that there was previous patch hanging series

  How do I kill/clear/demolition and clean up the patch suspended?

  $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 7

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  Master CRP2 PREPARE NOT APPLICABLE

  APPLY ASSETS 23 MARCH 15 13:15:35 + 08:00

  FINALIZE NOT APPLICABLE

  COMMISSIONING DON'T IS NOT APPLICABLE

  CLEANING NOT STARTED

  Folder synchronization system used in this Patching Cycle: None

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /home/applcrp2/CRP2/fs_ne/EBSapps/log/status_20150525_153549/adzdshowstatus.out

  Please wait...

  Done...!

  Help, please...

  Thank you very much

  MK

  Lol demolition Phase is not necessary.

  Don't run cleaning or if you want to apply another /hotpatch so you can continue with the current adoption session.

• Minimum CPU to EBS R12.2 socket

  Hi all

  EBS R12.2

  RHEL 6.5

  Closer or estimate only:

  Can you tell me please what is the socket cpu/core / / minimum required to run the TEST instance or VISION EBS R12.2?

  Thank you very much

  MK

  Hello

  It could be applicable to a normal situation we have discussed before.

  I don't think that the estimates may be doubled for every 100 users.

  According to R12.2 installation guide, you need the following resources for 100-200 users:

  OAF - tier approx.: 8 GB of RAM and 2 CPU (or carrots)

  OAF - DB level: 8 GB of RAM and 2 CPU (or carrots)

  Level of forms - App. : 4 GB RAM (for 100 users)

  Level of forms - DB: 3 GB RAM (for 100 users)

  Foregoing, you will need approximately 24 GB of RAM and probably 8 cores to serve 100 users (assuming that the shape layer needs 4 cores).

  The general rule for sizing would be for RAM, multiply by 1.5 and double the power of the processor every time you double the number of users (worst case).

  100 users: 8 cores and 24 GB

  200 users: 36 GB and 16 cores

  400 users: 52 GB and 24 cores

  You need to add to the above another 2 for the database layer and 3 GB for the application by the installation guide layer.

  Kind regards

  Bashar

• EBS R12.2 concurrent managers does not start

  Hi all

  EBS R12.2.4

  RHEL 6.6

  I checked my simultaneous managers using this command:

  Select CONCURRENT_QUEUE_NAME, MAX_PROCESSES, FND_CONCURRENT_QUEUES RUNNING_PROCESSES;

  
  

  CONCURRENT_QUEUE_NAME MAX_PROCESSES RUNNING_PROCESSES

  ------------------------------ ------------- -----------------

  FNDCRM                                     1                 0

  FNDICM                                     0                 1

  FNDSCH                                     1                 0

  FNDTMTST                                   0                 0

  STANDARD                                   3                 0

  PODAMGR                                    1                 0

  RCVOLTM                                    1                 0

  CMICRM                                     0                 0

  PASMGR                                     1                 1

  WFMGSMS                                    0                 0

  INVMGR                                     1                 0

  INVTMRPM                                   1                 0

  MRPMGR                                     0                 0

  CRPINQMGR                                  0                 0

  WFMGSMD                                    0                 0

  WFALSNRSVC                                 0                 0

  WFMLRSVC                                   0                 0

  FTE_TXN_MANAGER 0 0

  WMSTAMGR                                   0                 0

  XDP_MANAGER                                0                 0

  Debug_Service 0 0

  C_AQCT_SVC                                 0                 0

  IEU_SH_CS                                  1                 0

  IEU_WL_CS                                  1                 0

  XDP_CTRL_SVC                               0                 0

  XDP_Q_ORDER_SVC 0 0

  XDP_Q_WI_SVC                               0                 0

  XDP_Q_FA_SVC                               0                 0

  XDP_Q_FE_READY_SVC 0 0

  XDP_Q_EVENT_SVC 0 0

  XDP_Q_IN_MSG_SVC 0 0

  XDP_Q_TIMER_SVC 0 0

  XDP_APPL_SVC                               0                 0

  XDP_SMIT_SVC                               0                 0

  OKCCONCMGR                                 0                 0

  IEXCONMGR                                  0                 0

  OAMCOLMGR                                  1                 0

  WFWSSVC                                    0                 0

  AMSDMIN                                    0                 0

  FNDCPOPP                                   1                 1

  1 1 FNDSM_FITR12

  FNDIM_FITR12 0 0

  OAMGCS_FITR12 0 0

  FFTM                                       0                 0

  DownloadProcessorNormalMode 0 0

  DownloadProcessorMigrationMode 0 0

  46 selected lines.

  and I discovered that they do not work. I ran autoconfig both app & db, but nothing is done.

  Please help how to solve problems.

  
  

  Thank you very much

  MK
  

  What is the status of the manager simultaneous apps status-./adcmctl.sh.

  -Kj

• Cannot start the service of Directors of EBS R12.2.4

  Hi all

  EBS R12.2.4

  RHEL 6.6

  I was able to start admin service before but now it does not

  The error log does not show any idea. Help, please.  Thank you

  Service control script execution:

  /U01/appcrp/CRP/FS1/inst/apps/CRP_ip-10-0-0-216/Admin/scripts/adadminsrvctl.sh start - nopromptmsg

  Timeout specified in the context file:-1 second (s)

  
  

  script gave:

  ****************************************************

  
  

  You are running version 120.10.12020000.9 adadminsrvctl.sh

  From WLS Server Admin...

  See /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/logs/appl/admin/log/adadminsrvctl.txt for more details

  adadminsrvctl.sh: leave with the State 1

  adadminsrvctl.sh: check the logfile /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/logs/appl/admin/log/adadminsrvctl.txt for more information...

  .end std out.

  .end err out.

  
  

  
  

  The log is:

  
  

  ================================================================================

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  03/23/15-18: 29:54: adadminsrvctl.sh version 120.10.12020000.9

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  03/23/15-18: 29:58: adadminsrvctl.sh: exit with status 2

  ================================================================================

  03/23/15-18: 33:22: adadminsrvctl.sh version 120.10.12020000.9

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Validated the arguments passed to the ebs-nmstart-adminsrv option

  Check if the administration server is already in place.

  The server administrator is not already expired.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  The Node Manager is already in place.

  Start the AdminServer server...

  Error starting AdminServer server: weblogic.nodemanager.NMException: Exception when starting Server "AdminServer.

  03/23/15-18: 33:42: adadminsrvctl.sh: exit status 1

  ================================================================================

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Please see the workaround mentioned in the note:

  Error starting AdminServer server: weblogic.nodemanager.NMException: Exception when starting Server "AdminServer" (Doc ID 1906029.1)

  I hope this helps!

  -Kj

• adoption of Patching EBS R12.2 error

  Hi all

  EBS R12.2.4

  RHEL6.6

  phase of adoption $ [appcrp@ip-10-0-0-216 MobileApps] = apply patches = 20049473 patchtop = / u01/MobileApps

  Enter the password for APPS:

  Enter the password:

  Enter the password for WLSADMIN:

  Please wait. Validating credentials...

  RUN the file system context: /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

  Context file system PATCH file: /u01/appcrp/CRP/fs2/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

  Run the SYSTEM command: / u01/appcrp/CRP/fs2 df

  Determination of worker of County...

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

  [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  [appcrp@ip-10-0-0-216 MobileApps] $ adopscanlog-latest = yes

  Analyzing the log u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log file...

  /U01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log:

  ----------------------------------------------------------------

  #(27-31) lines:

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

  [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

  [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

  =============

  [ec2-user@ip-10-0-0-216 ~] $ vi /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  [EARLY 2015/03/20 19:28:40] Arguments passed to adoption

  phase = patch = 20049473 patchtop = / u01/MobileApps

  [END 2015/03/20 19:28:40] Arguments passed to adoption

  [EARLY 2015/03/20 19:28:40] Check the settings

  [END 2015/03/20 19:28:58] Check the settings

  [STATEMENT] Sourcing of the editing of run environment: /u01/appcrp/CRP/fs1/EBSapps/appl/APPSCRP_ip-10-0-0-216.env

  [EVENT]     [EARLY 2015/03/20 19:28:59] Verification of the requirements of ENV

  [EVENT]     [END 2015/03/20 19:29] Verification of the requirements of ENV

  [STATEMENT]  With the help of 4 workers (default: 4, recommended maximum limit: 62)

  [PROCEDURE] [EARLY 2015/03/20 19:29] Determine the admin node

  [STATEMENT] Node admin: "ip-10-0-0-216.

  [PROCEDURE] [END 2015/03/20 19:29] Determine the admin node

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

  [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

  [STATEMENT] Locking ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and the number of tent 2

  [PROCEDURE] [END 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

  [EVENT]     [EARLY 2015/03/20 19:29:01] Check that the waiting for sessions

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Control assets /hotpatch session

  [STATEMENT] Fetch the number of incomplete cycles for ip-10-0-0-216 with appltop_id = 195.

  [STATEMENT] value of incomplete_session: "0".

  [PROCEDURE] [END 2015/03/20 19:29:01] Control assets /hotpatch session

  [STATEMENT] Master Session ID: UNDEFINED

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

  [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

  [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

  [PROCEDURE] [END 2015/03/20 19:29:01] Unlock sessions table

  
  

  ==============

  
  

  [appcrp@ip-10-0-0-216 ~] $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 3

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  CRP2 slave FS_CLONE COMPLETED 5 November 14 03:59:33 - 04:00 November 5, 14 04:54:56 - 04:00 0:55:23

  PREPARE NOT APPLICABLE

  APPLY NOT APPLICABLE

  COMMISSIONING DON'T IS NOT APPLICABLE

  CLEANING DON'T IS NOT APPLICABLE

  Folder synchronization system used in this Patching Cycle: full

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /u01/appcrp/CRP/fs_ne/EBSapps/log/status_20150320_194359/adzdshowstatus.out

  Please wait...

  Done...!

  Please see

  ORA-20001: unable to set editing ORA-06512: has the jump "APPS.ad_zd" job: egosdaci.sql on the appsad_zd build (Doc ID 1989739.1)

  https://support.Oracle.com/epmos/faces/PatchDetail?RequestId=18488991&_afrLoop=191137541272365&patchId=20183051%3AR12.ego.D&_afrWindowMode=0&_adf.CTRL-State=5jicoeb2j_165

  AppsMAsti
  sharing is caring